Capacity : 800t, Stroke length : 400mm, Number of stroke : 15~30 spm, Bolster dimension (left and right x front and back) : 1040 x 1280mm, Slide dimension (left and right x front and back) : 1040 x 1280mm, Die height : 1200mm, Slide adjustment : 50mm, Main motor : 185kW, Maximum stop time : 285ms, Supply air pressure : 0.5MPa.

Capacity (T): 3000, Stroke (mm): 360, Slide Adjustment (mm): 10, Strokes Per Minutes (min): 21~60, Die Height (mm): 1000, Slide Area (mm): 1250 * 1170, Bolster Area (mm): 1350 * 1260, Main Motor (kw): 150 * 6, SLIDE KNOCKOUT- Capacity(t): 12, Pin Dia(mm): 60, Pin No: 2, BED KNOCKOUT - Capacity(T): 20, Pin Dia(mm): 80, Pin No: 3, DIE CUSHION - Capacity (T): 3000, Stroke(mm):　80, Pin Diameter(mm):　80, Pin no.(EA):　3, TRIMMING PRESS - Manufacture: KURIMOTO, Model: S2-300, Capacity (T): 300, Y.O.M : 1970 Stroke (mm): 250, Slide Adjustment (mm): 100, Strokes Per Minutes (min): 50, Die Height (mm): 650, Slide Area (mm): 1000 * 1100, Bolster Area (mm): 1100 * 1000, Main Motor (kw): 　 30 * 6, DIE CUSHION - Capacity (T): 30, Stroke(mm):　100,　 Pin no.(EA):　1

Capacity: 2500 T, Stroke: 320 mm, Strokes per minute: 65 SPM, Die Height: 879.5 ~ 886.5 mm, Ram Adjustment: 7 mm, Bolster Area: 1335 x 1400 mm, Adapter plate area: 1040 x 1100 mm, Bottom Knockout capacity: 12T x 2, Bottom Knockout stroke: 80 mm, Upper Knockout capacity: 5T, Upper Knockout Stroke: 40 mm, Main motor: 110 kW

capacity: 2500ton, In the year 1990 hot forging press is changed as warm forging press. Four stage Auto transfer press with Die holder and Induction heater,length of the stroke: 360mm, Stroke per minute: 15SPM, Ram adjustment: 10mm, Shut Height:876/890mm, Bolster area: 1340x1400mm, Slide size:1040 x 1100mm, Knock-out stroke: 100mm, Motor:110KW, Mass Weight:180ton. Induction heater : Make : Mitsubishi, Power: 600KW

TECH CAPACITY : 1000T

Capacity : 1000T, Sliding stroke: 400 mm Shut height: 1170 mm Die height: 920 mm Slide adjust dimension: 100 mm Number of strokes: 16-40 RPM Ball star dimensions: 1600 mm x 900 mm x 250 mm Slide dimensions: 1600 mm x 900 mm Dimension between columns: 1700 mm Opening again: 1400 mm   ● Transfer specifications Feed line height: 900 mm Feed stroke: 300 mm Clamp stroke: 40 mm Lift stroke: 3 mm

Capacity:1000ton, Stroke:240mm, Stroke per minute:100spm, DieHeight:650mm, Work stroke number:25, bed area: 900x1000 SL: 800x800