Capacity : 6 t, Standard dropping section weight(upper mold not included) (kg) : 6200,Standard upper section weight(Nominal value) (kg) : 1800,Stroke（ｍｍ）: 1300, Cylinder diameter : 580 mm, Piston diameter : 210 mm, Impact energy : 22415 kg-m (≈219.8ｋJ), Distance clear between guides : 795 ｍm, Lower ram surface : 795 W x 1006L mm, Upper sow block surface : 880 W x 1200L mm, Inlet Pipe Size : 125A (5B), Exhaust Pipe Size : 200A (8B), Required Air Compressor Capacity ; >535 Kw, Maximum Air Pressure : 7 Kg/cm2.

CAPACITY : 40 ton COUNTERBLOW HAMMER, -Condition:Fully refurbished in 2014~2015 -Technical specification Distance between Upper and Lower Ram (max.) :2400MM,(without tool) Dimension of Lower Ram : 1700x2230x2100 MM, Dimension of Upper Ram : 2310x2150x3500 MM, Distance between slides (free opening) : 1280 MM, Dimension of the connecting pipeline (outside diameter and wall thickness) at the inlet : 324/8 MM, at the exhaust port : 324/8 MM, at the control inlet : 34,2/3,2 MM, Dimension of the machine Height above ground level : 6800 MM, Width : 2800x4840 mm, Depth : 3600 mm , Base plate :3600x5300 mm , Foundation pit : 13600x8700 mm , Lower Ram weight : 47,260 kg, Upper Ram weight : 45,170 kg,

2.5t Hammer

3T Hammer Standard Dropping Section Weight : 3200kg, Standard Upper Mold weight : 540kg, Inpact Energy : 10900kg, Minimum Safe mold thickness : 400mm, Max. Stroke : 1200mm, Right to Left Ram Guide : 690mm, Lower Ram Surface Size : W 690*L 710mm, Upper sawblock surface size : W 725*L 915mm, Inlet Pipe Size : 100 Exhaust Pipe Size : 150 Floor to Machine Top : 5751mm, Overall Height : 6781mm, Piston Rod Removal Height from Floor Length : 8100mm, Minimum Compressor Output : 150Kw, Maximum operating pressure : 7kg/cnf

Capacity: 5.5 Ton, Ram weight: 5500 kg, Maximum Stroke: 1250 mm, Diameter of air supply pipe: 7 inch / 175 mm, Diameter of Exhaust Pipe: 8 inch/ 200 mm, Maximum Pressure: 7 kg/sq.cm, Compressor Capacity: 600 HP, Anvil Weight: 100,000 Kg, Total Weight: 175,000 Kg

2 ton.

0.5 ton.