Capacity : 500t,

CAPACITY : 500t, Stroke length : 260mm, Number of strokes : 15-35spm, Die height : 700mm, Bolster dimension (left to right x front to back) : 2.500mm X 1.100mm, TRANSFER STAGES: 8mm. "LEVELER FEEDER", MODEL: NCLF-350-60, YEAR: 1981, THICKNESS: t1.0mm - t6.0mm.

Capacity : 160ton, Number of strokes : 22-44spm , Stroke length : 200mm, Die height : 500mm, Slide adjustment length : 130mm, Slide dimensions (left to right x front to back) : 1650 x 500mm, Bolster dimensions (left to right x front to back) : 1650 x 600mm, Emergency stop time : 152ms, Maximum Stop time: 167ms, Overrun detection position: 15 degrees, Main motor: 22kW 4P.

Capacity: 1500t, Stroke length : 750mm, Number of stroks : 10~27spm, Die height: 1000mm, Slide adjustment : 100mm, Slide dimensions(left to right x front to back) : 4500×2100mm, Bolster dimensions(left to right x front to back) : 4700×2100mm, Main motor: 220kW, Emergency stop time : 420ms.

Stroke length: 360mm, SPM:20~30, Die height :700mm, slide amount :100mm, main motor: 45KW, bolster Dimensions:3000*1000

CAPACITY: 300T, SPM: 30~60,STROKE LENGTH: 200, DIE HEIGHT: 500, SLIDE ADJUSTMENT: 200, BOLSTER SIZE: 2500*1500, SLIDE SIZE: 2500*1400

capacity: 500ton,stroke length: 450mm, die height: 900mm,number of stages:12, stroke per minute:2.(15~30)3.(15~25), maximum drawing depth:2.(160)3.(120), slide adjustment: 100mm,slide area: 3600x1400mm, bolster area: 3600x1400mm, motar: 75KW

Capacity : 300T, Stroke : 350, spm: 20-40, Die Height: 750 10 steps, Bolster size: 3000 * 1000 With diction

CAPACITY:5000T

Capacity : 1000T Stroke : 10~25spm Stroke Length : 600mm Die Height : 1000mm Slide Adjustment : 120mm Slide Area : 5450*1600mm Bolster Area : 5450*1600mm Lift Stroke : 100mm Clamp Stroke : 200mm Working Process : 6~8 Point Size : 4 With Die Cushion 40.20.10*4 Ton Stroke : 180mm Bolster Area : 450*800mm

CAPACITY : 1500T, Stroke distance : 600mm, Number of strokes : 10~25, Die height : 1100mm, Bolster area : 4200 * 2000, Number of stroke : 6, Maximum drawing depth : 200mm, Maximum blank size : 600*1400mm, Feed stroke : 700mm, Plate thickness : 0.6~32mm.

Capacity: 300Ton, Stroke length: 300 mm, Stroke (2D, 3D) - 20 - 40 Spm, 20-32 spm, Die height:530 mm, Slide adjustment: 100 mm, Slide area: 2500*1000, Bolster area: 2500*1000*200 Die Cushion Specification: - Capacity * Stroke Length * Units - 1.6 T*70 mm*1 units 1.2 T* 70 mm* 4 units/ Knockout - 5 station installation Transfer device Specification:- 3 dimension transfer, Clamp stroke : 95 mm, Feed Pitch: 150 mm, Lift Stroke: 35 mm, Feed bar internal width Min-Max- 370 - 540 mm

Capacity: 500T, Stroke : 450mm, Slide Adjustment: 80mm, Strokes Per Minutes : 20-30spm, Die Height : 800mm, Slide Area: 3580 * 1250mm, Bolster Area : 3580 * 1250mm, Main Motor (kw): 90. With Coil Feeder Coil Width: 100 ~ 600mm, Coil Thickness: 0.5 ~ 4.5mm, Coil Length: 25 ~ 350mm, Coil Speed: 20 ~ 30spm

Capacity : 250T, Y.O.M :1980, Stroke (mm) :400, Slide Adjustment (mm) :100, Strokes Per Minutes (min) :15-30 , Die Height (mm) :700, Slide Area (mm) :3000*600, Bolster Area (mm) :3000*900, Main Motor (kw) :37. WITH TRIMMING PRESS : 80T

Capacity: 450 Ton, Stroke:340 mm, Stroke Per Minutes: 20 - 40, Die Height: 780 mm, Bolster Area: 2600 mm * 670 mm, Main Motor: 45 KW

capacity: 300ton,stroke length: 350mm, die height: 700mm,number of stages:10, stroke per minute:2.(20-40)3.(20-30), maximum drawing depth:2.(120)3.(180), slide adjustment: 100mm,slide area: 3000x1000mm, bolster area: 3000x1000mm

Pressure capacity : 200 KN, Stroke length : 30mm, SPM : 100~400mm, Die height : 240mm, Bolster : 650*285*130mm, Bed opening : 390*85mm, Motor : 2.2kW.

Capacity : 650ton, Stroke : 30 to 100mm, during operation, maximum slide stroke : 200mm, V-ring maximum stroke : 40mm, Pressure speed : 3~40t, Approach speed: 10~180mm, Maximum stroke number : 40spm, Bolster size(left and ringth x front and back) : 1150x1050mm, Feeding device Plate, thickness : 0.5 to 16mm, Plate width : 40~320mm, Scruff° cutter : 40ton.

Capacity : 500T , MAX.stroke : 280 , pressure : 236 kg/cm2 , open height : 600mm , shut height : 80mm

Capacity : 630T, Total Force : 4000~6000kN, Shear Force : 1800~5850kN, Ring Indenter Force : 320~3200kN, Counter Force : 160~1600kN, Safety Distance : 173mm, Ram Slowing Down Path Max : 12mm, Ram Closing Speed : 120mm/s

Capacity: 500T, Stroke: 180 mm, Daylight: 500 mm, Max descending speed: 180 mm/sec, Motor: 75 kW 6P

Capacity : 800T, Stroke(mm) : 280 FEEDER SPEC: MAKER:DAEBONG, YOM :2010, Coil Width : 50-450mm, Coil Thickness :10t, Coil Weight :5000kg, Coil out-dia :1800mm, Coil in-dia :508mm, Feed length: DIGITAL SETTING, Main motor: 7kw, Mandrel expansion : EXPANSION, Pneumatic pressure : 5kg/㎠, Hydraulic pressure : 100kg/㎠（MAX）, Power source : 440V 　3-PHASE

Technical specs pressure: 630T, plate thickness: 16 mm, SLIDE: total force (nominal): 630, stroke min.: 30 mm , stroke: 150 mm, cutting velocity min.: 3 (mm/s), cutting velocity max.: 50 (mm/s), closing velocity: 120 (mm/s), returning velocity: 135 (mm/s), V-RING: nominal force: 320, stroke: 40 mm, COUNTER RAM: nominal force: 160, stroke: 40 mm, TOOL DIMENSIONS: lower table - width: 910 mm, lower table - depth: 1350 mm, upper table - width: 900 mm, upper table - depth: 900 mm, daylight max.: 410 mm, STRIP-FEEDER: feeder type: roll feeder: nominal force: 6000 kN, sheet width max: 450 mm, sheet thickness max: 16 mm, feeding step min.: 1 mm

Capacity : 200T, Stroke Length : 30mm, Number of stroke : 100-300spm, Die height : 560mm, Slide adjustment : 50mm, Slide dimensions (left to right x front to back) : 1700 x 650mm, Bolster dimensions (left to right x front to back) :1700 x 950mm, (square hole) with VS.

Capacity : 125T, Stroke Length : 31.75mm, Number of stroke : 0-700spm, Shut height : 508mm, Slide adjustment : 51mm, Bolster dimensions (left to right x front to back) :1219 x 819mm, Clutch Air Pressure for rated tonnage in pounds : 60.