TECH CAPACITY : T:400x750

Pro-5, Table size : 750×400mm, Stroke : X600Y400Z350mm, Spindle : HSK-E32, Spindle speed : 40000rpm.

JAPAN

TECH CAPACITY : T:400x750

Professional5,ATC25,HSK-A63, Table size : 750*400mm, Spindle speed : 200~20000RPM, Stroke(XYZ) : 600*400*350mm.

JAPAN

TECH CAPACITY : T:400x750

Professional5 , Fanuc-180is MB5 SuperGI4 control Minimum command unit 0.0001mm , Table size : 750 x 400mm, T groove: 18H8 x 4 Maximum load: 300kg. Spindle - Holder Shank HSK-E32, High speed spindle : 40,000rpm, ATC storage number 40, Main bearing inner diameter : φ40mm, Travel amount for each axis : X-axis 600mm (spindle head left and right) x Y-axis 400mm (front and back of table) x Z-axis 350mm (spindle head vertical) , from spindle end to table top : 150 to 500 mm, Rapid feed rate XYZ : 20000mm/min, Cutting feed XYZ : 1～20000mm/min, Cutting tank : 130L, Total power capacity : 33kva, Air pressure source : 0.5～0.8MPa 600NL/min, Machine dimensions : Width 2280mm x Depth 2040mm x Height 2400mm, Machine weight T : 7300kg.

JAPAN

TECH CAPACITY : T:410x900

Fanuc180is-MB, 20 ATC, Table size : 900 x 410mm, Spindle speed : 12,000rpm, Stroke(XYZ) : 600 x 410 x 460mm, Maximum load : 500kg, Energizing time 95634h, Cutting time 18058h.

JAPAN

TECH CAPACITY : T:400X630

Fanuc-18iMB,BT40, 16 ATCs 50Hz, Table size : 630 x 400mm, Spindle speed : 20000rpm, Stroke(XYZ): 560 x 410 x 410mm,

JAPAN

TECH CAPACITY : T:400x700

Fanuc,16 ATCs, BT40 , Table size : 400 x 700mm, Spindle speed : 15,000rpm, Stroke (XYZ) : 560 x 410 x 410mm, Maximum load : 350kg.

JAPAN

TECH CAPACITY : T:400x750

professional 3, BT40, ATC 25, Table size : 750 x 400mm, Spindle speed : 20,000 rpm, Stroke (XYZ) : 600 x 400 x 350mm, Maximum load : 300kg.

JAPAN

TECH CAPACITY : T:1000X500

Professional-3,25 BT40 ATC, Table size : 1000 x 500mm, Spindle speed : 20000rpm, Stroke (XYZ):900 x 500 x 450mm, Maximum load : 700kg.

JAPAN

TECH CAPACITY : T:1000X500

Professional-3,Spindle BT40, Table size : 1000 x 500mm, Spindle speed : 20000rpm, Stroke (XYZ) : 900 x 500 x 450mm, Maximum loading capacity : 700kg.

JAPAN

TECH CAPACITY : T:500x1000

Professional-3, Spindle BT40, Table size : 1000 x 500mm, Spindle speed : 20000rpm, Stroke (XYZ) : 900 x 500 x 450mm, Maximum loading capacity : 700kg.

JAPAN

TECH CAPACITY : T:1400X600

Professional-3,BT50,ATC40, Table size : 1400 x 600mm, Spindle speed : 8000rpm, Stroke (XYZ): 1050*600*560mm.

JAPAN

TECH CAPACITY : T:1400X600

Professional-3,BT50, TABLE SIZE : 1400 x 600mm, Spindle speed : 8000rpm, Stroke : X1050 x Y600 x Z560, Machine weight : 8000kg.

JAPAN

TECH CAPACITY : T:500X1600

Control FANUC 20i-FB, BT-50 (24 pieces), Table work surface : 1600mmx500mm, Table movement : X1050mmY500mmZ550mm, Spindle speed 40～4000min⁻1.

JAPAN

TECH CAPACITY : T:800x1800

Professional-3,BT50,ATC30, T ABLE SIZE : 1800 x 800mm, Spindle speed : 4000rpm, Stroke : X1250 x Y800 x Z700, Machine weight : 12000kg.

JAPAN

TECH CAPACITY : T:550x1300

MAZATROL 640M ATC30 BT40, table size : 1200 x 550mm, Spindle speed : 12,000rpm, stroke 1020 x 510 x 460.

JAPAN

TECH CAPACITY : T:600x1500

MSX-853Ⅳ ATC 30 BT40, Table size : 1100 x 600mm, Spindle speed : 12000rpm, stroke : 600 x 530 x 510mm, Mass of machine : 6350kg.

JAPAN

TECH CAPACITY : T:410x900

Professional3 ATC80 BT40, Table size : 900 x 420mm, Spindle speed : 20000rpm, Stroke : 900 x 500 x 450mm, Size of pallet : 900 x 420mm, Maximum loading masson the table : 700kg, Motor capacity : 0.75kw.

JAPAN

TECH CAPACITY : T:2300X510

MAZATOROL 640M, ATC30 BT40, Table size : 2300 x 510mm, Spindle speed : 10000rpm, stroke : 1950 x 510 x 510mm.

JAPAN

TECH CAPACITY : T:1400X600

FANUC-18i-M, BT50 24 ATC, Table size : 1400 x 600mm, Spindle speed : 12000rpm, Stroke: X1000 Y600 Z550mm.

JAPAN

TECH CAPACITY : T:1500X740

FANUC180is-MB, BT40, ATC20, Table size : 1550 x 740mm, Spindle speed : 8000rpm, Stroke : X1530 Y740 Z660mm.

JAPAN

TECH CAPACITY : T:1500X740

Neomatic 635V,BT50, ATC40, Table size : 1,500 x 740mm, Stroke : X: 1530 Y: 740 Z: 660mm, Spindle speed : 8,000rpm.

JAPAN

TECH CAPACITY : T:700x1400

Professional5, HSK-A100 ATC60, Table size : 1400 x 700mm, Spindle speed : 18000rpm, Stroke : X1200 Y700 Z650mm.

JAPAN

TECH CAPACITY : T:2500X1260

FANUC160iS-MB ATC40 BT50, Table size : 2500 x 1260mm, Spindle speed : 4500rpm, Stroke(XYZ) : 2140 x 1260 x 900mm.

JAPAN

TECH CAPACITY : T:2500X1260

FANUC160is-MB,BT50,40 ATC, Table size : 2500 x 1260mm, Spindle speed : 6000rpm, Stroke : X2140 Y1260 Z900mm.

JAPAN

TECH CAPACITY : T:1800X1000

Professional6 (FANUC-31i),HSK-A63,Table size : 1800 x 1000mm, Stroke : (X)1500 x (Y)1000 x (Z)800mm, Spindle speed : 50～20000rpm, Table top height : 900mm.

JAPAN

TECH CAPACITY : T:1800X1000

Professional5, HSK-A100 ATC 40, Table size : 1800 x 1000mm, Spindle speed : 12000rpm, Stroke : X1500 Y1000 Z800mm.

JAPAN

TECH CAPACITY : T:550x1050

F-31iB, Table size : 1050 x 560mm, Stroke (XYZ) : 1050 x 530 x 510mm, Spindle speed : 8000rpm.

JAPAN

TECH CAPACITY : T:700x1650

NC unit: Pro-5, touch panel,Table size : 1650 x 700mm, Spindle speed : 20000rpm.

JAPAN

TECH CAPACITY : T:700x1400

NC: Pro3 (F-18iMB), Table size : 1400 x 700mm,BT50.

JAPAN

TECH CAPACITY : T:750X450

NC unit: Professional-5, Table size : 750 x 450mm, Storke (XYZ): 650 x 450 x 350mm, HSK-F63, Spindle speed : 30000rpm, cutting time: 2055h.

JAPAN

TECH CAPACITY : T:1000X460

NC unit: OSP-200MA, BT40, Table size : 1000 x 460mm, Spindle speed : 12000rpm.

JAPAN

TECH CAPACITY : T:650X1300

NC: F-0iMD, BT50, ATC30, Table size : 650 x 1300mm, tool length, chip conveyor.

JAPAN

TECH CAPACITY : T:1550X740

Fanuc-180is-MB, BT50,30 ATC, Table size : 1550 x 740mm, Spindle speed : 8000rpm, Table load capacity: 1500kg, Stroke(XYZ): 1530 x 740 x 660mm, Distance from table top surface to spindle end face: 150 to 810mm.

JAPAN

TECH CAPACITY : T:410x900

NC: F-31iB, HSK63, ATC: 30, Table size : 410 x 900mm, Stroke : X600 x Y410 x Z460mm, spindle speed: 20000rpm.

JAPAN

TECH CAPACITY : T:410x900

NC: Neomatic635V, BT40 ATC-30, Table size : 900x410mm, Stroke : X600 Y410 Z460mm, Spindle speed : 12000(OP：20000)min-1.

JAPAN

TECH CAPACITY : T:1050X550

Professional-3, ATC15, Table size :1050 x 550mm, S(XYZ):900 x 550 x 450mm, Tool length (bloom) : BT40, Spindle speed : 20000rpm.

JAPAN

TECH CAPACITY : T:3100X350

BT#40, ATC-20, Power supply: FANUC-0i-MC, Table: 3100 x 350mm, Stroke : X 3050 x Y 330 x Z 300mm, Spindle speed : 6000rpm.

JAPAN

TECH CAPACITY : T:3100X450

FANUC-18i-M,BT40,36 ATCs, Table size : 3100 x 450mm, Spindle speed : 4000rpm, Stroke: X3000 Y400 Z340.

JAPAN

TECH CAPACITY : T:4100X450

FANUC0i-MC, BT40, 45 ATC, Table size : 4100 x 450mm, Spindle speed : 6000rpm, Stroke : X4000 x Y400 x Z310.

JAPAN

TECH CAPACITY : T:400x750

NC unit MAKINO-Professional3, Table work area: 750×400mm, (T groove 18H8×4), Maximum loading mass: 300 kg, Spindle Holder shank: HSK-A63, Maximum spindle rotation speed: 20,000rpm, ATC storage number :15, Movement amount of each axis X-axis (spindle head left and right) : 600mm, x Y-axis (front and back of table) : 400mm, x Z-axis (spindle head top and bottom) : 350mm,From spindle end face to table top surface: 150 to 500mm, Feeding speed Rapid traverse speed: XYZ axes 20000mm /min,Cutting feed: XYZ axis 1 to 20000mm/min, Tank Cutting tank 130L, Required power source Total power capacity: 33KVA, Air pressure source: 0.5 to 0.8MPa 600NL/min, Size of machine Dimensions: Width 2280 x Depth 2040 × Height 2400mm, Weight: 7300Kg.

JAPAN

TECH CAPACITY : T:400x750

NC unit MAKINO-Professional3, Table work area: 750×400mm, (T groove 18H8×4), Maximum loading mass: 300 kg, Spindle Holder shank: HSK-A63, Maximum spindle rotation speed: 20,000rpm, ATC storage number 15, Movement amount of each axis X-axis (spindle head left and right) : 600mm, x Y-axis (front and back of table) : 400mm, x Z-axis (spindle head top and bottom) : 350mm, From spindle end face to table top surface: 150 to 500mm, Feeding speed Rapid traverse speed: XYZ axes 20000mm /min,Cutting feed: XYZ axis 1 to 20000mm/min, Tank Cutting tank : 130L, Required power source Total power capacity: 33KVA, Air pressure source: 0.5 to 0.8MPa 600NL/min, Size of machine Dimensions: Width 2280 x Depth 2040 × Height 2400mm, Weight: 7300Kg.

JAPAN

TECH CAPACITY : T:400x750

Professional5 HSK-F63 ATC 15 pieces, Table size : 750×400, Spindle speed : 30000rpm, Stroke : X600 Y400 Z350.

JAPAN

TECH CAPACITY : T:400x750

Professional5 HSK-A63 ATC 15 pieces, Table size : 750×400, Spindle speed : 20000rpm, Stroke : X600 Y400 Z350, Super GI.4.

JAPAN

TECH CAPACITY : T:400x750

Professional3 HSK-F63 ATC 25 pieces, Table size : 750×400, Spindle speed : 30000rpm, Stroke : X600 Y400 Z350, Super GI.3

JAPAN

TECH CAPACITY : T:400x750

Professional 3, BT 40, 20,000rpm, ATC:15.

JAPAN

TECH CAPACITY : T:400x750

Professional-3 HSK-A63, S : 600*400*350, T:750*400, Spindle speed : 30,000rpm, 60 ATC AWC12 Pallet Chip conveyor.

JAPAN

TECH CAPACITY : T:250X500

KNC&FANUC Comb blade 8000rpm, Stroke : 500×250, 2-finger 6-inch chip controller post-exit Mist collector stocker 12 stations High pressure coolant.

JAPAN

TECH CAPACITY : T:400x750

Professional A DTC 20 pieces (magazine plate φ4), Table : 750×400, 32000rpm, Stroke : 600×400×400mm, Spindle run :300mm, Right angle : 300*300mm, Swing dia : 300mm, X axis movement : 600mm, Y axis movement : 400mm, Z axis movement : 400mm, Distance b/w spindle surface and table top surface : 50~450mm, Distance b/w spindle center and front surface of column : 180~580mm, Table size :750*400mm, Spindle cutter dia : 23mm 6automatic, Clamping with built in straight collect : 3,4,8 each size can be replaced manually,Spindle speed : 3000~32000 min,Motor maximum output : 1.9kW,Motor maximum torque : 0.73Nm, Mechanical quality : 4100kg, Air pressure : 0.5Mpa 300L/min.

JAPAN

TECH CAPACITY : T:400x700

Professional5 ATC40 HSK-F63,table : 700×400, rpm : 30000rpm, stroke : 600×400×350 2APC, Spindle run out : 200mm, Swing dia : 300mm, Squareness geometric accuracy of motion : X-Z (300*300mm),Y-Z (300*300mm),X-Y (300*300mm),1)RANGE OF MOTION, Column left-right direction (X aixs) : 600mm, Table longitudinal direction (Y axix) : 400mm, Spindle vertical direction (Z axis) : 350mm, Between spindle surface and table top surface : 150~500mm, 2) SPINDLE, Spindle front bearing inner dia : 65mm, Spindle speed conversion steps : S5 digit direct finger, Tool clamp force : 8.8kN, HIGH SPEED SPINDLE - Spindle speed : 300~30,000min L, Drive motor : 15/11 kW (30 min/continuous), HIGH TORQUE SPINDLE - Spindle speed : 50~10,000min L, Drive motor : 7.5/5.5kW(25%ED/continuous),AUTOMATIC TOOL CHANGER(ATC) - Tool remote mode : Address fixed control system,Tool shank type : HSK-F63, Tool change time (tool to tool) : 7s,Maximum tool dimension (dia * length) : 80 * 250mm, Maximum tool mass (including shank) : 7 kg.

JAPAN

TECH CAPACITY : T:400x750

Professional5 ATC15 HSK-A63,Table : 750×400, RPM : 20000 rpm,Stroke : 600×400×350, Spindle run - out run-out of test bar : 200mm, Swing dia : 150mm, Right angle : 300 *300mm, Mist collector.

JAPAN

TECH CAPACITY : T:1000X500

ATC25 / HSK-A63,Rotary table Size: Φ1000*500*2APC,Travel (X*Y*Z): 900*500*450mm,Table to the end face of the spindel : 550,Spindle speed: 20,000 RPM,Maximum payload on the table : 700kg,Height of table top from floor : 980mm,Spindle motor : 22/18.5 KW,Spindle start up characteristics : 2.3 sec(14000 min),Fast forward speed : 50000 mm/min,Cutting feel rate :1~50000mm,Maximum tool length : 300mm, Tool mass : 8kg,Size of pallet : 900*420 mm,Pallet exchange method : Shuttle,Machine height : 2995mm,Required floor size : 2400 * 3140mm,Scale feedback function,With spindle Through Function,Tool Length Auto Measuring Device,MACHINE WEIGHT : 8500kg.

JAPAN

TECH CAPACITY : T:400x750

ATC15 / BT40,Rotary table Size: Φ750*400*300kg,Travel (X*Y*Z): 600*400*350mm,Table to the end face of the spindel : 500,Spindle speed: 20,000 RPM,Maximum work size : 750*45*250mm,Height : 2,400mm,With Gl Control,With Through Spindle Air,With Tool Length Auto Measuring Device,MACHINE WEIGHT : 7300kg.

JAPAN

TECH CAPACITY : T:1400X600

Professional3 BT50 ATC 20 pcs Table size 1400

JAPAN

TECH CAPACITY : T:355x786

FANUC-16iMB, T: 355

JAPAN

TECH CAPACITY : T:400x750

Control: Professional 5, Table Size: 750 mm * 400 mm, Stroke XYZ axis: 600 mm * 400 mm * 350 mm, HSK-A63, ATC-40, RPM: 20000, From the Main Shaft End Surface to the Table Top Surface: 150 - 500 mm, Machine Dimensions:- Width: 2280 mm, Back: 2040 mm, Height: 2400 mm, Machine Weight: 7300 kg, Thermal Guard: Super GI 4. (Two-Sided Restraint Type) (Ref.No-25492)

TECH CAPACITY : T:400x750

N/A

TECH CAPACITY : T:400x750

Mold specification machine Professional-5 Main axis: 30,000 rpm HSK-F 63 25 ATCs Cutting fluid temperature controller

TECH CAPACITY : T:630x630

NC device: MSX-501Ⅲ, Travel amount : X-axis : 900mm x Y-axis : 800mm x Z-axis : 980mm, Table work surface : 630mm x 630mm, Spindle maximum rotation speed : 10,000min-1, Taper No.50.

JAPAN

TECH CAPACITY : T:630x630

professional-5 (super GL,4 control), T: 630 square 0.0001 division, S:900*800*1020 (Moiré scale), 50～20000rpm, Spindle: HSK-A100, ATC: 186, Retractable tool length automatic measuring device (contact type) Marposs touch sensor Through spindle (3.0MPa) 2APCs

JAPAN

TECH CAPACITY : T:630x630

professional-5 (super GL,4 control), T: 630 square 0.0001 division, S:900*800*1020 (Moiré scale), 50～20000rpm, Spindle: HSK-A100, ATC: 186, Retractable tool length automatic measuring device (contact type) Marposs touch sensor Through spindle (3.0MPa) 2APCs

JAPAN

TECH CAPACITY : T:500x500

Mazatrol-640M,Spindle BT40, Table size : 500 x 500mm, Spindle speed : 15000rpm.

JAPAN

TECH CAPACITY : T:400x400

Spindle BT40, Table size : 400mm, Spindle speed : 12000rpm.

JAPAN

TECH CAPACITY : T:800x800

Professional3, Table size : 800 x 800mm, Spindle speed : 10000 rpm, Stroke : X800 Y750 Z770mm, Spindle motor power : 30 kW.

JAPAN

TECH CAPACITY : T:1000x2200

NC: Professional-3,HSK-A100, ATC-60, Table size : 2200 x 1000mm, Stroke : X-axis: 2000 x Y-axis: 1350 x Z-axis: 1000 mm.

JAPAN

TECH CAPACITY : T:1000x2200

Control: Pro5,Table size : 2200 x 1000mm, Stroke : X2000 x Y1350 x Z1000mm, Maximum processing volume : 2000 x 1000 x 1350mm, Maximum loading mass : 10T, Main rotation: 15,000rpm.

JAPAN

TECH CAPACITY : T:550X550

NC: Pro-3, HSK-A63, 2APC, ATC-60, Table size : 550 x 550mm, Spindle Speed : 20000 RPM, 400 square.

JAPAN

TECH CAPACITY : T:800x800

BT50, ATC120, 6APC B axis 1 degree Chipcon Tool length, Table size : 800 x 800mm, Maximum Speed : 8000rpm, Main motor : max 219 kw, Weight : 38050kg.

JAPAN

TECH CAPACITY : T:1200x1500

Table size: 1500✕1200mm, Table maximum load: 10000kg, Minimum indexing angle: 0.0001°, Stroke of each axis: X1500 (table left and right), Y1300 (head up and down), Z1300 (spindle front and back), Spindle speed: 20-15000rpm.

JAPAN

TECH CAPACITY : T:1250X1600

Table size : 1250*1600mm, Spindle speed : 15000rpm, Stroke of each axis: X2100 (table left and right), Y1560 (head up and down), Z1580 (spindle front and back), Table maximum load : 5000kg.

JAPAN

TECH CAPACITY : T:400x400

Pallet Size : 400 mm x 400 mm, X - Axis Travel : 560mm, Y - Axis Travel : 610mm, Z - Axis Travel : 560mm, Spindle Speed : 12000 rpm, Table indexing angle: 1/1,000°.

JAPAN

TECH CAPACITY : T:400x400

NC:Pro5 HSK-A63, Maximum spindle speed : 20000min-1, ATC60, Travel: (X) 560 mm (Y) 560 mm (Z) 600 mm, Pallet Size: 400 x 400 x 2APC, Max.Work Piece Mass: 400 KG, Spindle rotation speed: 20000 rpm, Feedrate Rapid: 60000 mm/min, Cutting Feeding Speed: 1 - 45000 mm/min, Arbitrary indexing 2APC Center through specification Chip conveyor (later output) Touch sensor Tool length measurement.

JAPAN

TECH CAPACITY : T:500x500

Control device Professional 5, Spindle HSK-A100, 10,000rpm, 1 degree indexing table, 60 ATC, pallet size 500mm, Travel: (X) 730 mm (Y) 730 mm (Z) 800 mm,From pallet center : 50~850mm, Pallet Size: 500mm, 2 pallets, Moire scale feedback XYZ0,1μm, Through-spindle coolant (7,0MPa) and air, Cutting fluid temperature controller, left chip conveyor, automatic grease supply device.

JAPAN

TECH CAPACITY : T:400x400

Pro.5 Spindle : BBT40 high output, 14000 rpm, (BIG･PLUS) Built-in hale function, ATC-60, 400×2 PCs, Travel: (X) 560 mm (Y) 560 mm (Z) 600 mm, Pallet Size: 400 x 400 x 2APC, Max.Work Piece Mass: 400 KG, Spindle rotation speed: 20000 rpm, Feedrate Rapid: 60000 mm/min, Cutting Feeding Speed: 1 - 45000 mm/min, Spindle Coolant: Through Spindle Coolant.

JAPAN

TECH CAPACITY : T:1500x3000

Professional-3, Table size : 3000×1500mm, S(X/Y/Z): 2500×1600×1300mm, 15000rpm, Distance b/w table top surface and spindle center line 100~1700mm, Distance b/w table edge and spindle edge : -200~1100mm, Origin of each axis : X- axis center of stroke, Y-axis Positive end of stroke, Z-axis Positive end of stroke, Table format : Blend table type, Table top height : 1280 mm from the floor, Maximum workpiece shape (length *width * height) : 2500 * 1700 * 1900mm, Maximum loading weight on the table : 15000 kg, Tool storage capacity : 5,Tool dia : 125mm, Maximum tool length : 450mm, Maximum tool mass : 8 kg,Tool maximum allowable moment : 9.8 N-M (1kgf-m), Tool selection method : random selection (fixed address method), ATC: 60, AAC: 25° angular 300mm, Extension Super GI Chipcon.

JAPAN

TECH CAPACITY : T:630x630

Professional 3 (F-16M),HSK-A63RPM : 20,000rpm,T:630*630, 2-pallet swivel,B: 1° indexing, XYZ:800*750*770,Spindle through coolant.

JAPAN

TECH CAPACITY : T:560X560

Pro3 control, s: 560 * 560 * 600, spindle 14,000 rpm, BBT40, ATC 60, 2 pallets 400 square, rear tip conveyor, NC rotary table (0.001 degree indexing, simultaneous 4-axis control)

JAPAN

TECH CAPACITY : T:630x630

ControL : CNC( FANUC 15M), Travel (X axis) : 630 mm, Travel (Y axis) : 525 mm, Travel (Z axis) : 500 mm, Chuck : indexing Type, Spindle Speed : 4000 rpm, ATC Tools : 99, Spindle Taper Hole : BT-50, Pallet Size : 630*630 mm

INDIA

TECH CAPACITY : T:630x630

Professional-3 (F-15), S (XYZ): 730 * 730 * 800, T: 630 * 630, 0.001 degree indexing (simultaneous 4-axis control), Spindle: HSK-A100, rotation 50-18000, 131 ATC, Through spindle (3.0MPa)

TECH CAPACITY : T:630x630

Professional-5, T: 630 * 630, S: X900 * Y800 * Z1020, HSK-A100, 60 ATC, NC rotary table, Moirless scale feedback, XYZ0.1, Left-handed 2-stage chip conveyor LDW955 Center trough conveyor, Retractable tool length automatic measuring device (Marposs) additional control additional axis, Helical interpolation (2 + 2 axes) 5XR compatible Super GI 4-axis control, Tool point control for 5-axis machining

TECH CAPACITY : T:400x400

CNC Control: Professional 5, Pallet Size: 400 x 400 x 2APC, Spindle rotation speed: 20000 rpm, Travel: (X) 560 mm (Y) 560 mm (Z) 600 mm, Max.Work Piece Mass: 400 KG, Spindle Taper Hole: HSK-A63, Feedrate Rapid: 60000 mm/min, Cutting Feeding Speed: 1 - 45000 mm/min, ATC: 40 Pcs, Machine Mass: 8000 KG, Spindle Coolant: Through Spindle Coolant

TECH CAPACITY : T:1000x1000

Professional 3, BT50 ATC60, 1000mm.sq. 2 pallets, ST(xyz)1250x1050x810, chip conveyor, coolant tank

TECH CAPACITY : T:1250X1000

FANUC16i-M BT40 ATC 40 pieces, Table : φ1250, 1 pallet Spindle speed : 20000rpm, Stroke : X1850 Y1300 Z700, Arbitrary index Machine weight 22t.

JAPAN

TECH CAPACITY : T:630X500

ATC16 / BT40,Rotary table Size: Φ630*500*200kg,Travel (X*Y*Z): 500*450*400mm,Spindle speed: Max.8,000minRPM,LINEAR SCALE,WITH CHIP CONVERYOR,WITH SPINDLE COOLING UNIT,NO OF SIMULTANEOUS CONTROL AXES : 5 AXIX,MACHINE WEIGHT : 6800kg.

JAPAN

TECH CAPACITY : T:630X500

ATC16 / BT40,Rotary table Size: Φ630*500*200kg,Travel (X*Y*Z): 500*450*400mm,Spindle speed: Max.8,000 RPM,LINEAR SCALE,WITH CHIP CONVEYOR,WITH SPINDLE COOLING UNIT,NO OF SIMULTANEOUS CONTROL AXES : 5 AXIX,MACHINE WEIGHT : 6800kg.

JAPAN

TECH CAPACITY : T:650X500

NC: Siemens 840Dsl Operate (CELOS specification), 21.5 type (ERGEline) multi-touch monitor, table: Φ650×500, S(XYZ): 650mm×520mm×475mm, HSK-63, ATC60, Spindle speed: 20000rpm, B-axis swivel range -35° to 110°, C-axis swivel range 360°, coolant tank, scale feedback (XYZ), through spindle, Tool length, touch sensor, chip conveyor,

JAPAN

TECH CAPACITY : T:600X350

Professional 5 (FS310i) simultaneous 5-axis rotary table specification　 ATC25 HSK-A63 20000rpm super GI.4 control Helical interpolation (circular interpolation + 2-axis linear interpolation) 5-axis machining function package Arbitrary angle chamfering, corner R Stroke (XYZBC) 600×325×350 　B = 130° (-20° to +110°) C = 360° C table φ200 (Minimum indexing angle 0.0001°) Non-contact tool measuring device (table top measuring type) Spindle through coolant (1.5MPa) Mist collector Air dryer Cutting fluid temperature controller (chiller, circulation pump) Kuroda MQL device Oil skimmer

JAPAN

TECH CAPACITY : T:630X500

[Low operating machine] Controller: S840Dsl (SIEMENS) Spindle HSK-A63 20000min ATC-30 Stroke: X650 Y520 Z475 table630×500 Tilt angle -35/+110

JAPAN

TECH CAPACITY : T:630X500

Celos with Siemens T: ?630 * 500 S (XYZ): 650 * 520 * 475 Spindle speed 20,000rpm, HSK-A63 Spindle coolant In-flight tool measuring device (Heidenhain) TT160, chip controller (scraper)

JAPAN

TECH CAPACITY : T:850X750

Control device: iTNC530 S935 * 850 * 650mm T ?850 * 750 Maximum work diameter ?1040mm Maximum work height 590mm HSK-A63 Maximum rotation speed 18,000min-1 ATC 90 In-flight measuring device Through spindle coolant Chip conveyor

JAPAN

TECH CAPACITY : T:630X500

Control unit: CELOS Table size: ?630 x 500 mm Stroke X: 650 Y: 520 Z: 475 mm ??????? B: -35 to + 110

JAPAN

TECH CAPACITY : T:650X400mm

FANUC31i-B5, BT30, ATC14, Table size : 650×400mm, Spindle speed : 24000rpm, Stroke : X500 x Y400 x Z330.

JAPAN

TECH CAPACITY : T:650X400mm

FANUC31i-B5, BT30, ATC14, Table size : 650×400mm, Spindle speed : 24000rpm, Stroke : X500 x Y400 x Z330.

JAPAN

TECH CAPACITY : T:650X400mm

FANUC31i-A5, BBT30, ATC 14, Table size : 650×400mm, Spindle speed : 24000rpm, Stroke : X500 x Y400 x Z330.

JAPAN

TECH CAPACITY : T:650X400mm

FANUC31i-B5, BBT30, ATC14, Table size : 650×400mm, Spindle speed : 10000rpm, Stroke : X500 x Y400 x Z330.

JAPAN

TECH CAPACITY : T:650X400mm

FANUC31i-B5, BT30, ATC 14, Table size : 650×400mm, Spindle speed : 10000rpm, Stroke: X500 x Y400 x Z330.

JAPAN

TECH CAPACITY : T:650X400mm

BT-30, ATC-14, F-16iMA,Table size (W x L) : 650×400mm, Stroke (X x Y x Z): 500 × 400 × 330mm, RPM : 15,000rpm, Weight : 2000kg.

JAPAN

TECH CAPACITY : T:650X400mm

BT-30, ATC-14, F-16iMA,Table size (W x L) : 650×400mm,Stroke (X x Y x Z): 500 × 400 × 330mm, RPM : 15,000rpm, Weight : 2000kg.

JAPAN

TECH CAPACITY : T:650X400mm

F-31i-B5, Stroke (X x Y x Z): 500 × 400 × 330mm, Table size (W x L) : 650 × 400mm, RPM : 10,000rpm, Weight : 2100kg.

JAPAN

TECH CAPACITY : T:650X400mm

F-31i-B5, Stroke (X x Y x Z): 500 × 400 × 330mm, Table size (W x L) : 650 × 400mm, RPM : 10,000rpm,Weight : 2100kg.

JAPAN

TECH CAPACITY : T:600X400MM

NC: CNC-C00 ATC 21 pieces BT30, table : 600×400, 16000rpm,stroke : 500×400×300,Power Requirements : AC 200-230V, 50/60 Hz 3 PHASE, CONT : 9.5kVA, Spindle motor : 4.9 kW, Short circuit current rating : 2.5 kA,Mass of machine 2250 kg, Ceiling shower coolant.

JAPAN

TECH CAPACITY : T:400X200mm

Full load rating : 45A/11.6 kw,Main motor : 5.5/3.7 kw,Control circuit : AC100V/DC 24V,Weight : 2700kg.

JAPAN

TECH CAPACITY : T:850X410mm

FANUC-16iMB BT30 ATC2 1 Spindle speed 20000rpm Table size 850

JAPAN

TECH CAPACITY : T:850X410mm

FANUC-16iMB BT30 ATC2 1 Spindle speed 20000rpm Table size 850

JAPAN

TECH CAPACITY : T:850X410mm

FANUC-16iMB BT30 ATC2 1 Spindle speed 20000rpm Table size 850

JAPAN

TECH CAPACITY : T:850X410mm

FANUC16i-MB S: 700 * 400 * 330 T: 850 * 410 ATC21 100-10000min-1 Maximum tool diameter: 80 mm Water soluble Not a high column specification * Simultaneous 3-axis machining is possible * Operating time: 1,057H

JAPAN

TECH CAPACITY : T:850X410mm

FANUC-16iMB BT30 ATC2 1 Spindle speed 20000rpm Table size 850

JAPAN

TECH CAPACITY : T:850X410mm

FANUC-16iMB BT30 ATC2 1 Spindle speed 20000rpm Table size 850

JAPAN

TECH CAPACITY : T:850X410mm

F-16iMB T: 850 * 410 S: 700 + 400 * 330 2000rpm # 30 ATC21

JAPAN

TECH CAPACITY : T:400X200mm

X-axis 500mm, Y-axis 400mm, Z-axis 330mm Table size 650mmx400mm Spindle speed 100-10000min-1, taper hole No30 21 turret devices, pull stud MASP30T-1

JAPAN

TECH CAPACITY : T:400X200mm

Control F-16i-MB, rotation speed 10,000 rpm T: 850 x 410

JAPAN

TECH CAPACITY : T:700x400

Special Vertical Type Honing Machine with ATC, X(axis):510 mm,Y(axis): 410 mm, Z(axis):460 mm,Number of Pallets : 8 nos, spindle size:BT 30, spindle RPM: 1500 ~ 8000 rpm,pallet size:700 * 400 mm,spindle motor:5.5 kw,ATC no.of tools:16 nos.

INDIA