Stocks List

« Previous 1 2 3 4 5 6 7 8 9 ... 36 Next » Show All Showing 11 - 20 Records 358 Stock(s) Found!

GENERAL CATEGORY : MACHINE TOOLS CATEGORY : PRESSES SUB CATEGORY : FORGING PRESSES       TYPE : HOT FORGING PRESS
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
151314 VORONEZH N/A N/A N/A
Rated Capacity: 25000 KN, Shut Height: 890 mm, Adjustable Distance between Table and Slide: 10 mm, Dimensions of Openings in L. H. Press Side Wall Height: 1000 mm, Width: 720 mm, Table Working Surface: L-to-R: 1200 mm, F-to-B: 1400 mm, Slide Dimensions: L-to-R: 1070 mm, F-to-B: 1120 mm, Slide Stroke: 350 mm, Slide Strokes Per Minute (continuous): 70, Number of Pitmans: 2, Number of Drive Stages: 2, Top Ejector Mechanism:- Stroke: 50 mm, Capacity: 63 KN, Bottom Ejector Mechanism: Stroke: 50 mm, Capacity: 100 KN, Main Drive Motor Power: 90 kW. Overall Dimensions: L-to-R: 5585 mm, F-to-B: 3750 mm, Height above Floor Level: 6800 mm, Mass (approximately): 183-5 Tons.
151156 VORONEZH KG-8042 1991 14
Capacity: 1600 T (DOUBLE CONNECTING ROD), Slide Stroke: 300 mm,No. of Continuous Stroke,min-1: 85,No. of Single Engagement,min-1: 26,Die- Height: 850 mm, Adjustment: 10 mm,BED DIMENSION- Left to Right: 1260 mm, Front to Back: 1300 mm,SLIDE DIMENSION- Left to Right: 1120 mm, Front to Back: 1400 mm,Main Drive Electric Motor: 90 kW, OVER-ALL DIMENSION OF THE PRESS- Left to Right: 5640 mm, Front to back: 4090 mm, Height above Floor Level: 6000 mm. Note: The Press is without Die set
151057 VORONEZH KB-8544 N/A N/A
Rated capacity: 2500 tons, Shut height: 890 mm, Adjustable distance between table and slide: 10 mm, Dimensions of openings in L. H. press side wall: -Height: 1000 mm, -Width: 720 mm, Table working surface: -L-to-R: 1200 mm, -F-to-B: 1400 mm, Slide dimensions: -L-to-R: 1070 mm, -F-to-B: 1120 mm, Slide stroke: 350 mm, Slide strokes per minute (continuous): 70, Number of pitmans: 2, Number of drive stages: 2, Top ejector mechanism: -Stroke: 50 mm, -Capacity: 63 kN, Bottom ejector mechanism: -Stroke: 50 mm, -Capacity: 100 kN, Main drive motor power: 90 kW, Overall dimensions: -L-to-R: 5585 mm, -F-to-B: 3750 mm, -Height above floor level: 6800 mm, Mass (approximately): 183-5 tons
151028 KURIMOTO SMERAL LKM 2500 N/A N/A
Capacity: 2500 T, Stroke length: 320 mm, Stroke per minutes: 60 SPM, Die Height: 880-890 mm, Ram Adjustment: 10 mm,Table size (LRxFR): 1340 x 1400 mm,Ram size (LRxFR): 1040 x 1100 mm, Upper Knock-out capacity: 5 T, Upper Knock-out Stroke: 50 mm, Lower Knock-out Capacity : 20 T, Lower Knock-out Stroke: 50 mm,Air Pressure: 6 kg/sq.cm
151026 HO SUNG HFP-750 2000 N/A
Capacity:750T,Stroke:180mm,stroke per min:100spm,Slide area LR*FB:720*780mm,Bed area LR*FB:760*900mm,Die height:580mm,Slide adj:8mm,Upper ejector:10mm,Lower ejector:40mm,Main motor(KW*P):45*8
151025 NATIONAL MAXI 1600T N/A N/A
Capacity:1600Ton
150998 VORONEZH 1000 T N/A N/A
Capacity:1000T
150978 SMERAL LZK 4000A N/A N/A
Capacity:4000T,stroke:380mm,stroke per min:60spm,slide area:1470x1400mm,bed seat:1520x1600mm,slide adjustment:15mm,die height:1000mm,upper ejector:50mm,lower ejector:80mm,main motor:200Kwx8P
150966 KURIMOTO LKM 1000 N/A N/A
Capacity: 1000 T, Stroke length :220 mm, Stroke per min:90 spm,Shut height:680 mm,Ram adjustment:10 mm, Bolster: 995 x 1050 mm, Slide:800 x 800 mm,Bottom knock out:10 T, Motor:55 kW Note: Die- Holder included; Under power, in working condition.
SOLD
150964 J&H PRESS J&H 400t 1997 N/A
Capacity ; 400t, Stroke Lenght ;150mm, SPM:100, Die Height:700, ADJ:5,Slide:690X740, Motor: 40hp Weight: 25~28t
« Previous 1 2 3 4 5 6 7 8 9 ... 36 Next » Show All Page: 2 of 36
358 Stock(s) Found!