TECH CAPACITY : 2.2T

Dropping Section weight : 2250 Kg, Normal Die Weight : 450 Kg (Maximum) Maximum Stroke : 950 mm, Guide Distance : 590 mm, Die Thickness : 350 mm, Ram Bottom Surface size : 570 w * 550 mm, Inlet Pipe Size : 100 (A) (4B), Exhaust Pipe Size : 125(A) (5B), Maximum Stamping Force : 6800 Kg-m, Required Air Compressor Capacity ; 110 Kw, Maximum Air Pressure : 7 Kg/cm2

INDIA

TECH CAPACITY : 6000mm

Outside Diameter of Finished Ring: 1,200 ~ 6,300 mm Height of Finished Ring: 80 ~ 1,000 mm Inside Diameter of Ring Blank for Mandrel Diameter: ￠300mm min. 320 mm Height of Ring Blank: max. 1,050 mm Ring Weight max. :approx. 12,000 Kg Radial Rolling Force :max. 300 Ton Main Roll Diameter: ￠1,200 mm Rolling Speed max. :approx. 1.7 m/sec Horizontal Stroke of Mandrel: 1,000 mm Axial Rolling Force: 250 Ton Length of Taper Theoretical :1,400 mm Taper Cone Angle :35˚ Horizontal Stroke of Axial Roll Stand: 5,700 mm Vertical Stroke of Upper Axial Roll: 1,050 mm Max Distance Between the Axial Roll: 1,120 mm Main Roll Driving Motor: DC710Kw×570Volt Axial Roll Driving Motor: DC710Kw×570Volt Hydraulic Main Pump Motor: 4sets-90Kw×440Volt×60Hz Cooling Circulation Motor 2 sets-3.7Kw×440Volt×60Hz Hydraulic Pump: 4sets-A4V-180 (REXROTH) Max Total Flow :720 Litter/min Operation Pressure: 210 Kg/㎠ Grease Lubrication Unit :2 sets

TECH CAPACITY : 1000mm

Dia : 1,120 mm, Height:225 mm, Type :RAW 40/25-900/225 (Upgraded 2019), Radial:40 tonnes, Axial:25 tonnes, Min dia:200 mm, Min Ring Height:40 mm, Radial Rolling Pressure parameters: Radial rolling pressure for mandrels I and II: 4 to 40 tonnes, Radial rolling pressure for mandrel III: 4 to 16 tonnes, Axial Rolling Pressure parameters: Axial rolling pressure for characteristic circles K 1 and K 2: 2 to 25 tonnes, Axial rolling pressure for characteristic circles K 3: 2 to 20 tonnes, Axial rolling pressure for characteristic circles K 4: 2 to 16 tonnes, Outside diameter of Mandrels: Diameter of mandrel I: 120mm (4.72"), Diameter of mandrel II: 95mm (3.74"), Diameter of mandrel III: 70mm (2.76"), Inside diameter of Mandrels: Diameter of mandrel I: 130mm (5.12"), Diameter of mandrel II: 100mm (3.94"), Diameter of mandrel III: 75mm (2.95"), Max outside diameter of Blank: 475mm (18.70"), Max area of Ring Face: 264 sq. inches, Max Axial width of ring: 225mm (8.86"), Min Axial width of Ring: 40mm (1.57"), Approx Max outside diameter of ring: 1,120mm (44.1"), Approx Min outside diameter of ring: 230mm (9.06"), Approx Min outside diameter of ring w/Mandrel II & for a Min final wall thickness: 9.9mm (0.39"), Travel of Mandrel Carriage: 560mm (22.05"), Nominal rolling speed: 1.3 mtrs/sec (49.21 in/sec), Nominal powers required: For Radial drive: 80kW (107hp), For Axial drive: 32kW (43hp)

TECH CAPACITY : 5000mm

2) Ring Rolling Year : 2007 Dia : 1000 ~ 5000mm, Height of Ring : 80 ~1000mm, Mandrel dia : 300mm, Rolling Force : Max.300T, Rolling Speed : 1.7m/s, Main roll Dia : 1100mm, Horizontal Stroke of Mandrel : 1000mm, Vertical Stand - rolling Force : Max.250t Distance between the tapper rolls : 1060mm, Hydraulic pump : 75kw*4 sets, Oil cooler AC Motor : 3.7kw*2 sets