TECH CAPACITY : 16000T

Capacity: 16000 Ton, Wedge Press KP 160000, RAM Stroke: 600 mm, RAM Adjustment: 30 mm, Idle speed: Max. 25 min-1, Number of single stroke: Max. 5 min-1, Shut Height (ram down, adjustment up): approx. 2,000 mm, Horizontal between stands: 2500mm, Table surface: 2440mm LR x 3000mm FB, Ram face: 2380mm LR x 2800mm FB, Side window: Width x Height 1,700 x 2,300 mm, Motor data: 700kw (951.73 HP), Electrical data - Working voltage: AC 3x 660V, Control voltage: AC220V DC24V, Frequency: 50Hz, Rated current: 1150A, Connection power: 1300 KVA, Overall dimensions: 9740mm x 12100mm, Weight: 1750 tons (98 crates at Dalian port), 220-ton table (Shanghai), 430-ton Traverse Crown (Shanghai), 72 tons left and right rows (each) (Shanghai), Original Packaging Condition (CONDITION: Original Packaging Condition).

TECH CAPACITY : 1600T

Pressure Capacity at 7 mm above bottom dead point:1600 Tons,Stoke: 280 mm,Shut Height(Between bottom Stroke and above adjust point): 760 mm,Ram Adjustment: 10 mm, stroke Speed: 8o SPM,Operation Speed: 22 SPM,Table Size:1248*1140(mm),Ram Size: 920*920 mm,Bottom Knockout Capacity:20 Ton,Air pressure: 5 Kg/cm2,Motor:75 kw

TECH CAPACITY : 2500T

Capacity: 2500 T, Stroke length: 320 mm, Stroke per minutes: 60 SPM, Die Height: 880-890 mm, Ram Adjustment: 10 mm,Table size (LRxFR): 1340 x 1400 mm,Ram size (LRxFR): 1040 x 1100 mm, Upper Knock-out capacity: 5 T, Upper Knock-out Stroke: 50 mm, Lower Knock-out Capacity : 20 T, Lower Knock-out Stroke: 50 mm,Air Pressure: 6 kg/sq.cm

TECH CAPACITY : 4000T

Capacity:4000T,stroke:380mm,stroke per min:60spm,slide area:1470x1400mm,bed seat:1520x1600mm,slide adjustment:15mm,die height:1000mm,upper ejector:50mm,lower ejector:80mm,main motor:200Kwx8P

TECH CAPACITY : 400T

Capacity: 400 T, Stroke: 156 mm, No.of.Strokes: 68 SPM, Die Height:420 mm, Table Area: 500 x 850 mm, Slide Area: 400 x 450 mm, Slide Adjustment: 10 mm

TECH CAPACITY : 450T

Capacity : 450 Ton, Stroke Length : 50 mm, Number of Stroke : 28 SPM, Diameter : 50-90mm, Main Motor : 45 KW 8P, Excentric Lubricating Motor : 0.75KW 4P, Slide Lubricating Motor : 0.02KW 4P, Feeding Speed : 3~12m/min, Feeding reducer Motor : 3.7KW 4P, Feeding Shaft Adjust Motor : 0.4KW 4P, Stock Feeding Motor : 0.75KW 4p

INDIA

TECH CAPACITY : 200T

Capacity: 200 Ton, Cutting Diameter: 28-50 mm, Stroke Per Minute: 25 SPM, Length of Stroke: 100 mm, Cutting Length: 45 -300 mm, Motor: 400V 50HZ 15W x 4P, Speed: 1.1 - 60 m/min, Maximum Loading Capacity: 10 Ton

INDIA

TECH CAPACITY : 800T

capacity: 800Ton, length of the stroke: 125mm, Stroke number: 20RPM cutting diameter:50-110mm, Brade length: 470mm, length:75-1.350mm, speed:300-600mm/sec, Motor:4P 55KW, Conveyor Motor:4Px5.5KW(8Px2.5KW), Air pressure:5Kg/cm2 weight:36t

TECH CAPACITY : 200T

Capacity: 200 Ton, Cutting Diameter: 28-50 mm, Stroke Per Minute: 25 SPM, Length of Stroke: 100 mm, Cutting Length: 45 -300 mm, Motor: 400V 50HZ 15W x 4P, Speed: 1.1 - 60 m/min, Maximum Loading Capacity: 10 Ton

INDIA

TECH CAPACITY : 450T

Ton: 450t, Stroke: 45 SPM, length 105mm, Motor drive dynamic:37(6P), Supply oil : 0.1(4P), feed rate: 40m/min, reduction gear motor:2.2(4P), necessary amount of air: 50 NL/time,Machine height, width,lenght(m)2.9x2.3x3.0, Feeder:1.35x3.375x7.5m, cutting machine(Weight):31500kg,feeder:(kg)3500, dia: 40mm-70mm.

INDIA

TECH CAPACITY : 200T

Ton:200t, Stroke:50SPM, length: 75mm, shut height:442mm, bed size:460x700mm, ram size:300x410mm, oil pump motor:5~6Kg/cm2, Feeder Model: LAF200,feeding speed: 25m/min, feeder motor:2.2KW,feeder reducer:1/20, feeder length:7500mm, table size:1200x2130x5000mm, air pressure:5~6kg/cm2

INDIA

TECH CAPACITY : 1200T(Φ150)6"INCH

Upsetter capacity: 1200 Ton, Tightening capacity: 420 Ton, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of piece: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Height of machine: 3830 mm, Weight: 128.7 Ton

TECH CAPACITY : 1200T(Φ150)6"INCH

6inch(152mm); Width of dies:660.4mm Height of dies:812.8mmmm Thickness of dies:282.5mmmm Stroke of header:508mm Stroke of dies:165.1mm Motor:75kw Upsetter pressure:1300ton Stroke per minute:27 Motor rpm:870

TECH CAPACITY : 2000T(Φ200)8

Nominal Force:2000 ton, Upsetting slide stroke:570 mm Stroke of moving matrix:280 mm Upsetting slide strokes per minute:25 Main motor:160 kW Dimensions:6400 mm х 9000 mm х 4500 mm Weight: 270 ton

TECH CAPACITY : 1500t

CAPACITY: 1500 T, WITH MANIPULATOR 10 T 1) Hydraulic press 1500t Manufacturer: "HYDRAULIC", Duisburg, Germany Force - 1500t Stroke - 1600mm Number of strokes per min. - 4 Distances between columns - 1800 and 1450 mm Power - 300 Kw Press dimensions (LxWxH) - 3650x2750x9055 Press weight - 252t 2) Manipulator MK10-66L Year - 1971 Manufacturer - Plant of heavy forging and pressing equipment, Ryazan city, Russia. Lifting capacity, kN 100 Load moment, kN 250 The largest diameter of the pincers turning circle, mm 1900 Distance from the end of the jaws to the frame, mm 2245 Clamp opening range, mm 1480 ... 200 The smallest height of the trunk axis from the rail head, no more, mm 1225 The greatest parallel rise of the trunk, no more, mm 700 Angle of lateral rotation of the trunk around the vertical axis, degrees 360 Clamp rotation frequency, min-1 10.7 Manipulator movement speed, m / min 40 The speed of movement of the trunk in the vertical plane, m / min 1.9 Base, mm 4400 Track width, mm 4000 Manipulator dimensions, mm length 8435 width 1950 height from rail head 4225 Power, kW 30 Weight,45 t

TECH CAPACITY : 1600T

3 STAGE DIE SET -- Length : 1260mm, With : 1200mm, Height : 785mm.

INDIA