F-16iMB T: 850 * 410 S: 700 + 400 * 330 2000rpm # 30 ATC21

X-axis 500mm, Y-axis 400mm, Z-axis 330mm Table size 650mmx400mm Spindle speed 100-10000min-1, taper hole No30 21 turret devices, pull stud MASP30T-1

Control F-16i-MB, rotation speed 10,000 rpm T: 850 x 410

Fanuc16i-MB BT30 ATC14 T:850x410 S(XYZ)700x400x330

Fanuc16i-M BT30 ATC14 T:850x410 S(XYZ):700x400x330

Fanuc16i-M BT30 ATC14 T:650x400 S(XYZ)500x400x330

T:650x380 BT30 S(XYZ)500x380x300 ATC14 Japan Central Bank used (clean)

Robodrill Fanuc 31i-Model B 5 S: 500 * 400 * 330 T: 650 * 400 Maximum spindle speed: 24,000 rpm BT 30 ATC 21 books Spindle through coolant · tool length measurement

Fanuc31i-MB5 T:650x400 S(XYZ)500x400x330 10000rpm ATC21 Maximum spindle speed: 10,000 rpm BT 30 ATC 21 books Spindle through coolant · Tool length measurement · DDR (circular table)

OSP-U100M BT50 ATC24, table 1200x2100, sub-table 2370 x 1650 spindle 4000rpm

Fanuc, Bed top swing : φ310mm, width : 1870mm x length : 1980mm, height : 1790mm, Weight : 2000kg.

Max. Swing over the table : Ø480 mm,Max. Distance between centers : 750 mm, Max. Thread length to be ground : 500 mm, Max. Weight to be ground : 100 kgs, Max. Diameter to be ground : Ø200 mm, Max. Obtainable lead to be ground : 600 mm, Grinding wheel size (O.D. x W x I.D) : Ø510 x 10~50 x Ø228.6mm, Number of spindle speed steps : 2 (pulley and belt change), Spindle speed : 1675 rpm, Max. wheel surface speed : 2,100 m/min, Max helix angle : ± 45°, Total stroke : 265 mm, Rapid traverse stroke (NC controlled stroke) : 75 mm, Feed amount per step : Ø0.001 mm, Total stroke 650 mm, Feed amount per one step : 0.0001 mm, Lead setting range : 0.25 ~ 600 mm, Rapid retract without rotating spindle : 2,400 mm/min, Work spindle center height from bed bottom : 1,100 mm, Machine overall height : 2,055 mm, Machine net weight with standard equipment : 9,500 kg, Floor space : 4,100 x 3,615 mm, Electric power supply (Standard) : AC 200 / 220 V, 3 phase, 50 / 60 Hz, 45 KVA, Compressed air : 4.0 kg/cm2, 0.1 m3/min.

φ500.4 jaw, single action chuck : φ260×5000mm, with steady rest If there is a discrepancy between the contents and the actual product, the actual product will take precedence.

FANUC0MC Hole diameter Φ4-Φ20 , S: X1200 Y950, Z1600 without rest device Z1450 with rest device,

Table minimum indexing angle B: 0.001°, ATC : 30 BT50, Table size(L x W) : 1000 x 1000mm, X travel : 1500 (back and fornt), Y travel : 1200 (up and down), Z travel : 700 (left and right),W travel 400 (quill), Spindle speed: 3000rpm.

table size : 710 x 800mm, Spindle speed : 6-4000rpm, Stroke : X1500 x Y1250 x Z1150 x W500mm, Spindle diameter : 110mm.

Table size : 1000×1200mm, Spindle speed : 12000rpm, Stroke : X1500 x Y1200 x Z900 x W400, Spindle diameter : 200mm.

Table size : 1250×1120mm, Spindle speed : 3000rpm, Spindle diameter : 110mm, Stroke : X1600 x Y1250 x Z1130 x W500.

FANUC-16iMB, BT50 30 ATC, Table size : 1050×950mm, Spindle speed : 3000rpm, Spindle diameter : 110mm, Stroke: X1000 x Y1000 x Z700.

Table size : 1250×1250mm, Stroke : X1500 Y1500 Z1100mm,

FANUC-15MA T: 1600×1800×2APC X-3000 Y-2000 Z-1300 W-700 B-0.001 Spindle center from table top: 0 to 1800mm 5～2000rpm BT-50 AC26Kw ATC-60 Maximum workpiece diameter φ2400 Loading weight: 6,000Kg

Controller: FANUC 15M, Table work surface size: 1,600 × 1,800 mm, Workpiece allowable mass: 10t (6t when using APC), Table minimum indexing angle: 0.001°, Stroke X: 3,300 Y: 1,800 Z: 1,300 W: 700 mm, Spindle diameter: φ130 mm, Spindle speed: 5 to 2,500 rpm (3 steps), Spindle taper hole: BT50, Number of ATC: 90, Required floor space: 7,000 × 9,500 mm, Height: 4,750mm, Machine weight: 53,000 kg.

FANUC16i-MB BT50 30 ATC Table size 1000×1200 Spindle speed 12000rpm Stroke X1500 Y1200 Z900 W400 Arbitrary indexing Center through (3Mpa) Chip conveyor

TECH CAPACITY : φ:110

Control:Tosnuc 888, Table area:1400x1600mm,Table indexing: arbitrary indexing,S(XYZW): 2000x1500x1450x500mm,5to3000rpm,BT 50,ATC-90

W21FA-2, Maximum workpiece size: 800 x 600 x 215, Maximum workpiece weight: 500kg, TABLE SIZE : 590×514mm, Stroke (XYZ) : 350×250×220mm, S (U×V) : ±32×±32, Wire diameter used : φ0.1 to φ0.3mm.