FANUC-18T with milling table φ910mm swing φ1000mm　 Maximum processing height H550mm 2APC BT50 ATC36 Table rotation Max600rpm (2-stage low speed specification) Milling spindle Max4500rpm

OSP-P200L BT50 ATC36 4-jaw single action chuck φ915 with cover with tools

[❖Video available❖] F15-TF 10-jaw hydraulic chuck (3200φ) Simultaneous 2 axes (XZ) Table diameter: 3200 Maximum diameter that can be cut: 4000 Maximum turning height: 1400 Maximum load mass: 15T Table rotation speed: 0.8-80min-1 Vertical movement amount: 1000mm Left and right movement amount: 1500mm Swivel angle 0° Size of mounting tool: 32*32mm ATC12

OSP-P200L, BT50, ATC36, 4-jaw single action, chuck dia : φ915, with cover, with tools.

Fanuc : 0T-B, Table dia : φ3000, Max turning : φ7000, Processing height : 2200, Workpiece weight : 15T, Tool vertical stroke : 1200, Main Motor: 45kw x 6p.

OSP-5020L 21 inch chuck # 06618

MAXIMUM SWING : 11,500mm, MAXIMUM TURNING OUTER DIAMETER-11,500mm, MINIMUM TURNING INNER DIAMETER: (Right head:650mm),(left head:650mm), MAXIMUM WORK HEIGHT- 5,500mm,MAXIMUM DISTANCE FROM THE TOP OF THE TABLE TO THE BOTOOM OF THE PITE HOLDER(at a holder lenght of 400mm),MAXIMUM LOAD WEIGHT ON THE TABLE- 200,000Kg

TECH CAPACITY : φ:1200

Fanuc-18iT, DRILLING & MILLING Table:Φ1250, ATC24,Max Machinig Dia.1600,Max Swing:1600,height1250, Max Loading work8000kg, Max drilling dia.80mm, max cutting force 30kN, Max tap dia.M48 x 5

TECH CAPACITY : φ:1200

Fanuc-6T, Turrest type, table Φ1250mm,Swing1600mm,Turing outside dia.1350, max.machining height1250,mazx.loading work5000kg: turret head traverse(UD)850, (RL)900/100

TECH CAPACITY : φ:1200

Table:Φ1200mm Swing:Φ1600mm

TECH CAPACITY : φ:1200

Side Head Type Table:Φ1200mm Swing:Φ1600mm, Turning height:930mm, X,Y,Zscale

TECH CAPACITY : φ:600

Fanuc-21T Chuck: 600 Maximum cutting diameter: 630 Maximum swing: 800 Maximum cutting height: 500 Maximum product load: 300kg Table maximum rotational force: 1470 The amount of movement: up and down about 750 * 500 Tool storage capacity: 6 Table rotational speed: 15-1000

1200×5000　 With digital (only 1 axis)　 with replacement gear

TECH CAPACITY : φ:1500

Fanuc 16T swing over bed:1600,swing over cross slide:1300,Distance between centers:4000,chuck size:1500,working weight:15t

MAZATROL 640MT PRO ATC80 BT-40 1st spindle 2800rpm 2nd spindle 3300rpm 12 inches (1st/2nd) 1st spindle 3 hollow jaws KITAGAWA B-21215X 2nd spindle 3 hollow jaws KITAGAWA B212 Mill shaft 12000rpm Stroke (XYZ) 630 ×230×1585 Maximum machining length 1524mm Maximum swing φ760 tool eye Mill unit replaced with new one

Mazatrol Matrix Nexus, Bed Length -300Uin,Capacity Maximum Swing:550mm /21.65in,Maximum Machining Diameter:280mm /11.020in,Maximum Bar Work Capacity:51mm /2.0in, Maximum Machining Length : 335mm /13.190in, Main Spindle Chuck Size : 6in, Maximum Speed : 6000rpm, Motor Output (30minute rating)11kw /15.0hp, Turret (Upper) Number of Tools:12, Maximum Speed: 4500rpm,

MAZATROL MATRIX, Specification Bed Length - 300U in, Capacity Maximum Swing 550 mm / 21.65 in, Maximum Machining Diameter 330 mm / 12.990 in, Maximum Bar Work Capacity 51 mm / 2.0 in , Maximum Machining Length 285 mm / 11.220 in , Main Spindle Chuck Size 8 in, Maximum Speed 5000 rpm , Motor Output (30 minute rating) 15 kw / 20.0 hp , Turret (Upper) Number of Tools 12 , Feed Axes Travel (X Axis) 190 mm / 7.48 in .

MSC-518 (Fanuc) Both center specifications 12-sided turret Right-out chip conveyor (spiral)

MSC-518 (Fanuc) Both center specifications 12-sided turret Right-out chip conveyor (spiral)

MSC-500 (Fanuc) Both center specifications 12-sided turret Right-out chip conveyor (spiral)

Maximum processing diameter : Φ20, Maximum processing length : 165mm, Maximum front hole diameter : Φ10, Spindle rotation speed : 8000min, With bar feeder.

CINCOMSYSTEM, FS32i-Model A, Maximum processing diameter : Φ20, Maximum processing length : 165mm, Maximum front hole diameter : Φ10, Spindle rotation speed : 8000min, Back spindle rotation speed : 8000min, Number of tools installed: 21, 6 pieces of gang turning tools, Comb blade rotary tool : 3 pieces, 4 tools for front hole drilling, 8 tools for back drilling, Alpstool ASR X-20ZC type (3M) with bar feeder With automatic fire extinguishing system With mist collector.

FANUC, MMaximum processing diameter : Φ20, Maximum processing length : 165mm, Maximum front hole diameter : Φ10, Spindle rotation speed : 8000min, rotary guide bush 6 external diameter bits can be installed　 2 cross rotary tools can be installed 4 main/sub common end face holes Comes with parts catcher　 Workpiece unloading conveyor with left-out chip conveyor (scraper)　 With 4 medium coolant pressure units and automatic fire extinguishing system　 Auto bar 3m specification (Alps/ASR X-202C).

Control system : CINCOM F-32iMB, Rated power : 7.1 kVA, Max machining dia : 20mm, Max machining length : 200(55)mm, Max drilling dia : 10mm, Max tapping dia : M8, Spindle speed (rpm) : 10,000max, Max chuck dia of back spindle : 20mm, No of tools to be mounted : 21,Bar feeder : ASRX-207CII-3M, Machine weight : 2,200kg.

Control system : CINCOM FS32i-modelA, Rated power : 6 kVA, Max machining dia : 20mm, Max machining length : 200(55)mm, Max drilling dia : 10mm, Max tapping dia : M8, Spindle speed (rpm) : 10,000max, Max chuck dia of back spindle : 20mm, No of tools to be mounted : 21,Bar feeder : ALPS Tool X-207C-3M, Machine weight : 2,550kg.

Control system : CINCOM FS32i-Model A, Rated power : 6 kVA, Max machining dia : 20mm, Max machining length : 200(55)mm, Max drilling dia : 10mm, Max tapping dia : M8, Spindle speed (rpm) : 10,000max, Max chuck dia of back spindle : 20mm, No of tools to be mounted : 21,Bar feeder : OS2A805-2.5M, Machine weight : 2,200kg.

Control system : CINCOM F32i-A, Rated power : 6 kVA, Max machining dia : 20mm, Max machining length : 100mm, Max drilling dia : 10mm, Max tapping dia : M8, Spindle speed (rpm) : 10,000max, Max chuck dia of back spindle : 20mm, No of tools to be mounted : 21,Bar feeder : OS20C-3m, Floor space : 2.3m*1.15m, Machine weight : 2,200kg.

CINCOM SYSTEM M6, Maximum processing: φ42*80mm , S: (1st axis) X135*Z200mm, (2nd axis) X44*Z397mm, Spindle through hole: φ47mm, 60-6000rpm, C-axis: 0.001°, Tools: 12, Milling: 4500rpm, With milling function (without holder), With Chip Controller (Right Out), With 3m bar feeder (Alps FX-45).

CINCOM SYSTEM M6, Maximum processing: φ42*80mm , S: (1st axis) X135*Z200mm, (2nd axis) X44*Z397mm, Spindle through hole: φ47mm, 60-6000rpm, C-axis: 0.001°, Tools: 12, Milling: 4500rpm, With milling function (without holder), With Chip Controller (Right Out), With 3m bar feeder (Alps FX-45).

TECH CAPACITY : DIA 210x14stations, gantry loader

FANUC, φ295,8 inch hydraulic chuck*2,Octagonal turret*2,Bit 20 φ40,45-4500rpm,7.5Kw, S: X130*Z-145,3-axis, CNC reversing gantry loader (workpiece 3Kg) Palletizer.

FANUC φ295,8 inch hydraulic chuck*2,Octagonal turret*2,Bit 20 φ40,45-4500rpm,7.5Kw, S: X130*Z-145,3-axis, CNC reversing Single gantry loader (workpiece 3Kg) Palletizer.

FANUC-16TT,φ295,Howa 6 inch hydraulic chuck*2,Octagonal turret*2,Bit 20 φ32,45-4500rpm,7.5Kw,S:,X130*Z145,3 Axis CNC Inverted Gantry Loader.

FANUC φ295,8 inch hydraulic chuck*2,Octagonal turret*2,Bit 20 φ40,45-4500rpm,7.5Kw, S: X130*Z-145,3-axis, CNC reversing gantry loader (workpiece 3Kg) Palletizer.

Turret front : dia 225, Maximum chuck size Standard : 210 mm (8"),Option : 254 mm (10"),Number of turret stations : 15 x 2, Maximum bar workpiece size : dia. 65 mm,Spindle drive motor : Standard: 15 kW / 30 min x 2,Option: 18.5 kW / 30 min x 2, Spindle speed range : 42 rpm - 4,200 rpm, Live tool drive motor : 3.0 kW x 2, Maximum tool shank size : 16 mm, Maximum processing : 5260, Maximum length : 170mm, Number of turret stations - X1,X2-axis(radius value) : 230mm, Z1axis : 250mm, Z2 axis : 810mm, Fast forward speed - X1,X2-axis : 20m/min, Z1axis : 24m/min, Z2 axis : 32m/min, Spindle speed (standard) : 4200 rpm, Boring bar maximum dia : 40, Rotary tool motor : 3.6KW, Rotary tool maximum rotation speed : 3600 rpm, Spindle indexing method : C-axis control (0.001 deg) : C-axis rapid traverse : 200 rpm, Maximum tool diameter milling : 16, Tap : M12, Cutting oil capacity : 200 liters, Gross weight with loader : 10,800 kg. LOADER SPECIFICATION - Stroke X-axis : 665mm,Z-axis : 2250mm, X-axis : 150mm, Maximum speed - Y axis : 100m/min, Z axis : 120m/min, X axis : 35m/min,Shaft : 90"<270>, Loader chuck specification (pneumatic chuck) -Jaw stroke dia : 33, Outer dia grip : 180kgf, Inner dia grip : 180 kgf.

FANUC F18i-TB,Chuck size - STD : 205 mm (8"),OPT: 254 mm (10"),Work size - Loader specification machine : 200mm, Without loader : 350mm, Loader specification : 120mm, Without loader : 170mm, 1st Station : 10, X-axis (radius value) : 190mm, Z-axis : 170mm, Fast forward speed X-axis : 24m/min,Fast forward speed Z-axis : 24m/min, Spindle speed - Strandard : 35~3000 rpm,option : 24~2400 rpm, Standard tool : 25mm, Maximum ring dia : 40mm, Weight (with loader and tools) : About 7000kg, Required floor space(this machine only) : Width 2360mm * Depth 2130mm, Width 2410mm * Depth 2130mm, Tooling : Turret, Number of tools - STD : 10 x 2,OP : 12 x 2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm - 3500 rpm, Spindle AC motor : 15 kW / 30 min x 2,22 kW / 30 min x 2, Number of gantry loader : 1, Gross weight with loader : 7200 kg.

FANUC F18i-TB,Chuck size - STD : 205 mm (8"),OPT: 254 mm (10"),Work size - Loader specification machine : 200mm, Without loader : 350mm, Loader specification : 120mm, Without loader : 170mm, 1st Station : 10, X-axis (radius value) : 190mm, Z-axis : 170mm, Fast forward speed X-axis : 24m/min,Fast forward speed Z-axis : 24m/min, Spindle speed - Strandard : 35~3000 rpm,option : 24~2400 rpm, Standard tool : 25mm, Maximum ring dia : 40mm, Weight (with loader and tools) : About 7000kg, Required floor space(this machine only) : Width 2360mm * Depth 2130mm, Width 2410mm * Depth 2130mm, Tooling : Turret, Number of tools - STD : 10 x 2,OP : 12 x 2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm - 3500 rpm, Spindle AC motor : 15 kW / 30 min x 2,22 kW / 30 min x 2, Number of gantry loader : 1, Gross weight with loader : 7200 kg.

FANUC F18i-TB,Chuck size - STD : 205 mm (8"),OPT: 254 mm (10"),Work size - Loader specification machine : 200mm, Without loader : 350mm, Loader specification : 120mm, Without loader : 170mm, 1st Station : 10, X-axis (radius value) : 190mm, Z-axis : 170mm, Fast forward speed X-axis : 24m/min,Fast forward speed Z-axis : 24m/min, Spindle speed - Strandard : 35~3000 rpm,option : 24~2400 rpm, Standard tool : 25mm, Maximum ring dia : 40mm, Weight (with loader and tools) : About 7000kg, Required floor space(this machine only) : Width 2360mm * Depth 2130mm, Width 2410mm * Depth 2130mm, Tooling : Turret, Number of tools - STD : 10 x 2,OP : 12 x 2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm - 3500 rpm, Spindle AC motor : 15 kW / 30 min x 2,22 kW / 30 min x 2, Number of gantry loader : 1, Gross weight with loader : 7200 kg.

FANUC F18i-TB,Chuck size - STD : 210 mm (8"),OPT: 254 mm (10"), Tooling : Turret, Number of tools - STD : 10 x 2,OP : 12 x 2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 - 3500, L・R V10 SP1・SP2, rpm : 4800rpm,Spindle AC motor : 15 kW / 30 min x 2,22 kW / 30 min x 2, Number of gantry loader : 1, Maximum processing diameter : φ350mm, 8inch 3-jaw solid (Kitagawa HOH-208),Maximum processing length : 120mm, Stroke : 190×170mm, No gantry loader stocker,Gross weight with loader : 7200 kg.

○ Features 　Left and right completely separated type, hard turning specification 　Left spindle 10 inch / Right spindle 8 inch chuck 　With gantry robot and post-exit chip conveyor 　20 station work stocker on the right (WF20L-160II) 　Measuring device on the left ○NC equipment 　FANUC31iA ○Maximum processing diameter 　φ240mm ○Distance between both spindles 　440mm ○Turret 　octagonal on both sides 　Axis stroke: X-axis (radius value) 130mm Z-axis 145mm 　Rapid traverse speed: X-axis 24m/min Z-axis 24m/min ○Spindle end shape 　JIS A2-5 ○Spindle through hole diameter 　φ47mm ○Inner diameter of front bearing 　φ80mm ○Spindle speed 　45-4500rpm ○Spindle motor 　AC7.5kw (30 minutes) x 2 ○ Machine size 　Width 4400 x Depth 2600 (including chip conveyor) x Height 2700mm (including loader) machine dimensions : Width 4400 x depth 2600 (including chip conveyor) x height 2700mm

Fanuc-16-T, Maximum swing φ295, octagonal turret, 8 inch chuck,Turret : 8 tools, Traverse X:130 Z:145, Spindle Speed : 45-4,500 RPM ,500rpm, Gantry loader specifications.

Chuck size : 165 mm (6"),Maximum processing dia : 168mm, Maximum length : 80mm,X - axis : 130mm,Z - axis : 110mm, fast forward speed : X axix -24m/min , Z axis - 24m/min, Spindle speed standard : 45-4500rpm,Standard tool : 20mm,Boring bar max : 40mm,Distance between spindles : 340mm,Maximum swing : 230mm,Tooling : Turret x 2,Spindle nose : JIS A2-5,Max. Spindle speed : 3000 rpm, 4500 rpm, 6000 rpm,Spindle AC motor : 5.5 kW / 30 min x 2,Number of gantry loader : 1,Gross weight with loader : 3500 kg, Required floor space (this machine only) : width 15550mm* Depth 1650mm.

Fanuc-18iTB 10 inch hydraulic chuck (left and right) Dodecagonal turret (left and right) With milling function Gantry loader Work stocker (right)

Freeze Pressure : 200,Frequency : 50H2,Rated capacity : 26.7KVA,Freeze current : 76.9A,Main motor rated power : 40A.

TECH CAPACITY : ?:210x14stations, Gantry loader 6 inch chuck (both left and right NICCO HF3-6A) # 19KX326290001

Chuck size:STD: 210 mm (8") OPT: 254 mm (10"), Number of tools: STD : 10 x 2 OP : 12 x 2,Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm, 3500 rpm, Spindle AC motor : 15 kW / 30 min x 2 22 kW / 30 min x 2 , Number of gantry loader : 1, Gross weight with loader : 7200 kg

Fanuc 6inch 7.5kwx2 4 comb turrets, twin loader, manual available With electrical drawing

FANUC FS30i V8 (left and right) 4500rpm (left and right) Maximum processing diameter x length φ120 x 75 Stroke 130×145 Kitagawa air chuck (left and right/4 inches) 　Left: Special claw (wide type) Right: Special claw (wide demon claw type) Chipcon Left Exit Bucket Attached Left Exit Chute Gantry loader (with reversing machine) Rotary stocker 10ST Cutting Edge R Correction Chamfering/Corner R

TECH CAPACITY : Chuck: 210x8 stations ,Turret: 8 * 2 Spindle rotation: 45-4500rpm, Twin loader type,

TECH CAPACITY : ?:210x14stations Control: FANUC16TB Between both spindles: 340mm Chuck: 6 inches * 2 Turret: 8 * 2 Spindle rotation: 45-4500rpm

TECH CAPACITY : ?:210x14stations, Gantry loader 6 inch chuck (both left and right NICCO HF3-6A) # 19KX326290001

TECH CAPACITY : ?:210x14stations, # 18KX214480001 Made in October 2018

TECH CAPACITY : Φ:210x14stations

2003.1 FANUC-18iTB parallel 2 spindle (RIKEN / AD40E) 2 turret (8 � 2) with gantry right-handed chip conveyor carry-out conveyor 【in adjustment】

TECH CAPACITY : Φ:210x14stations

Fanuc-31iA, Max processing size:Φ120-75,Stroke(XZ)130*145, max spindle: 4500rpm, chuck 8inch, guntry-loader, stocker, chip conveyor

Weight : 3300kg,

Swing on bed 1260 , Swing on feed table 1020 , Center distance 6000.

End face composite processing Fanuc-16iTB (2003 retrofit, remodeled) Swing on the bed φ1220 * Between hearts 6000 V8 turret End face milling BT40 ATC12 Fixed motion vibration

Meldas (NC Retrofit 1991), chuck : φ1250mm, Bed top swing : φ1320mm, Swing on carriage : 1000mm, Width x height : 1000 x 600mm, Main motor : 30kw, center distance : 10m, Between Centers : 10,000mm, 2-saddle specification (V8 + presser foot type), Steady rest x 2 Roll holder x 1.

TECH CAPACITY : φ2000*12000

Fanuc-9TA,Table size:φ2000,Swing over cross table:φ2000, Distance between the center:12000,Work area(diameter*length):φ2000*12000L,S(XZ):715*15000,Max loading amount:50ton

M-SMART, Maximum swing : Φ720mm, Maximum processing diameter: 420mm, Stroke(X x Z) : 265 x 1350mm, Rotation speed : 4000rpm, Max bar work capacity : dia 80mm, Turret V12 (Chuck/10 inch), Mill axis motor Output : 7.5KW, Milling unit spindle : 4000rpm, Machine weight : 6900kg.

OSP-P200L, V12, 3000rpm, Maximum processing diameter*length: φ200*225, 8 inches 3 claws (hollow) S:155 (20+135) *245, Mill rotation speed 6000rpm, Chip controller right side, mist collector

M5 center spacing 3m, MAZATROL 640T, Machine weight T : 7700

NC equipment, OSP-P200L , Spindle : 10 inch 3 prong Kitagawa B-210 Hollow, Spindle speed : 75～3000rpm, Swing on bed : φ450 mm, Swing on traversing table : φ300 mm, Maximum processing (diameter x length) : φ280 x 290mm, Turret/Stroke Square slide sliding surface XZ axis stroke : 160x330mm, Turret V8, Square tool shank : 25mm, Boring bar : φ40mm, Machine dimensions : Width 2600mm x Depth 1600mm x Height 1600mm, Machine weight T : 2800kg.

NC equipment,OSP-P200L , Spindle : 8 inch 3 claw Kitagawa B-208 Hollow, Spindle speed : 75～3000rpm, C-axis 360 degrees Minimum 0.001 degrees, Swing on bed : φ450 mm, Swing on traversing table : φ300 mm, Maximum processing diameter x length : φ200 x 225mm, Square slide sliding surface XZ axis stroke : 160x245mm, Square tool shank : 20mm, Boring bar : φ32mm, Rotary tool : 6,000rpm, Machine dimensions : Width 2600mm x Depth 1600mm x Height 1600mm, Machine weight T : 2800kg.

Fanuc0i-TD, Spindle speed : 2500 rpm.

Chuck size : 110 mm (4") 135mm (5"),Number of tools : 10, Spindle nose : Flat nose,Max. Spindle speed : 80000 rpm,100000 rpm,Spindle AC motor : 3.7 kW / 30 min,Gross weight with loader : 2500 kg.

Maximum chuck : Φ16,Number of spindles : 6,Maximum material feed length : 80mm,Movement by cam : 30mm,Screw adjustment amount : ±10mm,lever : 1.15:1~0.5:1,Distance from perishable center to top of slide : 36.513mm,Amount of movement :80mm,lever ratio : 1:1~0.5:1,Distance from spindle center to top surface of slide : 26.210mm,RPM range : 400~5000rpm,Cycle time range : 1.6-27 sec,main motor : 7.5kw 6p,pump : 5w*2,oil pump : 0.75kw,Mouth*Depth*Height : 2245*1030*2030mm.