TECH CAPACITY : T:150X450

Manual machine, no automatic feed (with grindstone head up / down fast forward), T: 450 * 150 (17mm T-groove * 1), S: 480 * 180, Maximum distance from the top of the table to the center of the grindstone shaft 550, Distance from floor to work surface 1055, Table left and right handle 1 rotation stroke 100, Front and rear handle 1 rotation stroke 4, Front and rear handle 1 scale stroke 0.02, Forward / backward fine movement handle 1 scale stroke 0.001, Up and down handle 1 rotation stroke 1 Up and down handle 1 scale stroke 0.005, Vertical fine movement handle 1 scale stroke 0.001, Vertical fast forward speed 500mm / min, Whetstone dimensions: outer diameter φ205 * width 6.5-25 * inner diameter φ31.75, Grindstone rotation speed 0-2850 rpm (with inverter), Motor: 1.5kw2P for grindstone shaft (optional), 0.1kw6P for vertical fast forward, 13w for lubrication pump, Table drive method: wire, Table slide surface: sliding surface (turkite) * Vertical / front / rear digital dust absorption / water injection device (paper filter) Currently without magnet chuck (standard chuck dimensions: 350 * 150 * 70 / maximum work weight 70 kg)

TECH CAPACITY : T:400X900

T: 900 * 400, S: 1050 * 440, Flat chuck 900 * 400, Wet, Whetstone: 305 * 32 * 76.2

Many accessories such as Magsepa High-end product Grindstone rotation speed inverter With separate work loader type before and after the main body (Although it is a single unit separate interlocking specification, it can be easily separated when not in use and the main body is a normal specification as a general-purpose machine)

Through type Whetstone dimensions: φ455 * 150, Capacity : φ1 ~ ?75, Grindstone hydraulic bearing Adjusting vehicle hydraulic pressure bearing Adjustment car table slide static pressure guidance Lead screw Ball screw Coolant paper filter type.

Whetstone dimensions: 510 * 205 Whetstone shaft Adjustable axle co-static pressure Coolant device (with magsepa)

Grinding capacity: ?1.5-110mm Grinding wheel: ?510 * 205 * ?30 4.8mm Peripheral speed: 2000m / min Adjusting whetstone: ?255 * 205 * ?127mm 18-200 rpm (60 Hz) Infeed

Fines supply device (with FP straight feeder), Sulfeed grinding table for fines, supply pipe receiver / discharge shooter, grinding fluid purification device magnet separator (40 liters), reversing device and hanger for replacing both grindstones, water shield cover

2008 Manufacturer overhaul Grinding capacity: ?1-60mm Grinding wheel: ?405 * 150mm Adjusting whetstone: ?230 * 150mm 1450rpm

2021 OH finished Processing diameter: ?3-100mm Grinding wheel: ?610 * 305 * 304.8mm Adjusting whetstone: ?330 * 305 * 203.2mm Turning angle: (Feed angle) -1

Through feed Whetstone diameter: 455 * 150 Coolant device (Spiclon type) Diamond wheel Jib crane

* O / H at the manufacturer in 2005 Workpiece ??Diameter ?1mm ? ?50mm ??Maximum grinding length (in feed) 150 mm Grinding wheel ??Dimensions: Outer diameter ?455 * Width 150 * Inner ?228.6mm ??Peripheral speed 2400m / min Maximum peripheral speed 2700m / min Adjusting whetstone ??Dimensions: Outer diameter ?230 * Width 150 * Inner ?101.6mm ??Rotation speed 23-200 rpm (continuously variable transmission) motor ??Grinding wheel: Standard / 7.5kw Maximum / 15kw Adjusting wheel 0.75kw Hydraulic pump 0.4kw ??Grinding liquid pump 0.15kw pump ??Hydraulic: Type / Vane pump capacity 3L / min ??Grinding liquid: Type / External fan type Capacity 80L / min Lubrication ??Sliding surface: Manual lever pump Grindstone shaft: Grease worm gear: Oil bath Turning angle ??Adjusted vehicle feed angle + 6

Whetstone: ?610 * 205mm Through feed No separator and coolant tank

Whetstone dimensions: ?455 * 150 * ?228.6 (outer diameter * width * inner diameter) Grindstone peripheral speed: 2400m / min Adjustable vehicle dimensions: ?305 * 150 * ?177.8 (outer diameter * width * inner diameter)

Whetstone: 610 x 52 x 304.8mm, Processing diameter: 1-50mm, Rated Voltage : 200V, No load rotation speed : 1400 rpm, Grinding wheel dia : 610mm, Grinding wheel thickness : 52mm, Grinding wheel hole dia : 304.8mm.

Whetstone 610-220 Stop polishing product Both center holders move up and down

TECH CAPACITY : Φ:200X300

full automatic φ200 * 300 Maximum processing diameter φ60 Scale 1 axis

Chuck work surface : 900x400mm, Table left/right movement amount : 1050mm, Column longitudinal movement : 440mm, Grinding wheel spindle overhead vertical movement : 325mm, Distance between the center of the grinding wheel shaft and the top of the table : 175-500mm.

Table size : 1200 x 500mm, Width x height x length : 1200 x 600 x 500mm, Movement of table left and right : 1300mm, Movement of table front and back : 530mm, Top of the table : 850mm, Chuck dia : 600 x 500mm, Grinding wheel dia (dia x width x hole dia) : 510 x 50 x 127mm, Weight : 6500 kg.

Table : 1500 x 700mm,

Table size : 2050 x 800mm, Processing range (length x width x height): 2000 x 800 x 695mm, Stroke : Front/rear 860 x Left/right 2250mm, Grindstone: Outer diameter : 510 x 50mm, Inner diameter : 127mm.

Table size : 2050 x 500mm, Machining range of workpieces : 2000 x 500 x 595mm.

Machining range of workpieces:4000*800*800 Table:4050*800 chuck dimensions:4000*800*100 Loading weight:3728kg T-groove width*number:20mm*3 S:4250*800*860 Whetstone:?510*100*?203.2 (50/60Hz)1000/1200rpm,SIZE : W11*D4.5*H3.78m, WEIGHT : 30T

Fanuc-0M 1500rpm T:2000*600*83(H) S:2300*660*620 Grindstone diameter:?510*50*?127(inner diameter)

Vertical axis,T:900*400

Fanuc-20F T:580*200mm Chuck:500*200*70mm X:600 Y:225mm 3600rpm

Horizontal type

FANUC-0-M,Table movement amount:1050*540,Table work surface:950*500,Standard chuck size:900*500*110,Grindstone: outer diameter 355* width 38* inner diameter127(50Hz)/305*38*127(60Hz), Grindstone rotation speed:1500(50Hz)/1800(60Hz).

Okamoto Precision T:400

F18M MG:400*200

Chuck dimensions: 1200 x 500 Whetstone dimensions: ?510 x 50 x ?127 FX power supply

?Mg chuck: 1000 * 500 ?Left and right-1150 Around -540 ?Loading weight: 700kg ??355 * 38 * ?127 ?Sliding surface high precision specifications ?Forward and backward fine movement feed ?Rotary dressing ?MB-3 microbalance device ?Upper dresser ?2-axis digital ?Automatic demagnetizer ?Oil cooler ?Mist collector ?Coolant with paper filter & Mg separator ?Kanetec Mg chuck: 450 * 150 * 100

FX power supply, chuck: 900 * 500, dust collection / water injection / magsepa / paper filter-, delivery after repainting

Whetstone outer diameter: 355 Thickness: 38 Hole diameter: 127 Rotation speed: 1800 rpm

Distance between centers: 350 Swing on the table ?350 Grinding maximum diameter ?150

Table swing: ?300, center spacing: 1200, steady rest? magnet separator

Whetstone 610 Stop polishing

F-18TB, Workpiece : φ2-100mm, Circumferential speed: 45m/s, Infeed width : 200mm, Grindstone: φ610*205*φ304.8mm, 1400rpm, 22KwUP, hydrostatic bearing, hydrostatic slide, Adjustment whetstone: φ355*205*φ177.8mm, 15-166rpm (stepless).

Fanuc 18i-TB, Grindable outer diameter : φ4~120mm, Maximum infeed grinding width : 500mm, Grinding wheel : φ610×510×φ304.8mm, Adjustment wheel : φ355×510×φ203.8mm, Adjustment wheel rotation speed : 10-250mm, Adjustment wheel inclination angle -2° to +5°, Grinding wheel drive motor : 37kw, Floor space : 3,300×1,600mm, Machine weight 10T.

6 axis NC, Processing range : φ1.6~φ120mm, Grinding wheel dimensions : φ610×305mm, Floor area: 2,470×1,975mm, Mass: 7T.

FANUC, Power Mate I-D Processing diameter : φ1-60mm, Processing length : 150mm, Grinding wheel diameter : φ610*150*φ304.8mm, Grinding wheel : 1040rpm.

Grinding wheel Diameter : φ610mm, Grinding wheel width 405mm, Hole diameter : φ304.8mm, Rotation speed : 2400m/min, maximum circumferential speed : 2400m/min.

Grinding wheel : φ610×W405mm, Through feed specification, FANUC 1-axis control machine requiring overhaul, current status Main unit only.

Fanuc 18-T, Grindable outer diameter : φ4~120mm, Maximum infeed grinding width : 500mm, Grinding wheel : φ610×510×φ304.8mm, Adjustment wheel : φ355×510×φ203.8mm, Adjustment wheel rotation speed : 10-250mm, Adjustment wheel inclination angle -2° to +5°, Grinding wheel drive motor : 37kw, Floor space : 3,300×1,600mm, Machine weight 10T.

NC: F-18iTB, Processing workpiece length : 177.0 to 284.5mm, Mounting cutter size : φ100, Spindle rotation speed : L400~1000mm R400~1000mm, Drill rotation speed : L1600 R1600mm, Outer diameter cutting : L1600, Drill spindle stroke : 60mm.

Fanuc16-T, Grindstone: φ610 x 305 x φ304.8, Processing diameter φ12-φ32, Feed angle -1degree～＋5degree, Horizontal turning angle ±0.5degree.

Fanuc-18T Whetstone: ?610 * 405 * ?304.8 Processing diameter ?25-?75 Whetstone 2000rpm

Fanuc16-T Whetstone: ?610 * 305 * ?304.8 Machining diameter ?12-?32 Feed angle -1

Fanuc Power Mate

Fanuc Power Mate Maximum grinding diameter: ?150 With separator and oil tank

FANUC Power Mate Machining diameter ?1-50 Machining length 145 Grindstone diameter ?400 * 150 * ?228.6

TECH CAPACITY: ?455*150,SPEED:2700mm,voltage:200

? Grinding wheel: ?610

FANUC-30iA, Grinding diameter : φ100~1000mm, Center distance 11000mm, Stroke : X630, Z 11,100mm, Spindle : 50rpm, Grindstone : 450~1350rpm, Grindstone Outer diameter : 915mm, Width : 100mm, Maximum processing weight : 25t.

Fanuc 18i-T, Grinding diameter : φ610*4200mm, Center distance : 3000kg.

Max.Work Piece Dia: 20 - 205 mm, Axial Travel: 0 - 40 mm, Cut-in Amount: 40 mm, Grinding Stone Size: 200 * 20 * 50.8 mm

F-16T, Swing on the table: Φ320, Between fixtures: 580, Grinding diameter: dia30～dia70 Stroke(XY) : 425 x 530mm, Crank head speed : 1~200mm, Floor space (A20) : 5300mm, Machine weight : 16,000kg.

Tosnuc 888 Total Table:1600*1600 with manual Machining diameter: φ3-30

Hole diameter 1～5Φ Working length 300 F-21iT

Hole diameter φ5~8 depth 200 4500rpm inverter speed change

FANUC18M, 1 axis, Hole diameter: Φ4-24, Drilling depth: MAX 1200mm, Rotation speed: 580-5250rpm, Table: 1000mm x 1500mm, Loading weight: 2000kg, Left/right stroke: 780mm, Vertical stroke: 480mm, Feed rate (cutting feed): 0 to 500 mm/min, Feed speed (fast forward): 5 m/min, Main tank capacity: 850L, Auxiliary tank: 350L, High pressure pump: 105kg/㎠ 50L/min, Filter: 75μ, Chip conveyor: 60L/min, Chip delivery: 30L/min, Motor: Total capacity 14.5Kw (21KVA) 200V 50Hz, Machine dimensions : 6000mm×2800mm, Machine weight T : 8

Hole diameter: φ5 to φ20 mm Hole depth: 130 to 1500 mm Spindle speed: Low speed 800 to 3800 rpm (stepless) High speed 1500 to 6500 rpm (stepless) Control: FANUC Power Mate 0

FANUC POWER MATE D Machining capacity: Hole diameter φ5-25 Hole depth 300-1150 Spindle 6000rpm Work rotation 150rpm Work steady rest 2 places Tank capacity clean 800L dirty 300L

"Fanuc18M,1 axis,Machining ability:φ4~24,520~5,250rpm,table:1000*1500 Left and right stroke:780,Vertical stroke:480,hardness HRC-40 possible,Electric motor:14.5kw,SIZE : 5.9*3.4m,WEIGHT : 9t"

Fanuc Powermate D, Clear hole diameter: φ30 ~ φ250, Perforation depth: 1000 to 4000, Processing method: BTA method,

Oil specifications, power supply LN1W, stroke XYZ 220