Fanuc16i-MB BT50 ATC20 T:1350x560 Spindle6000rpm S(xyz):1050x560x520

BBT 40 30 ATCs T: 1300 * 550 Main shaft rotation speed 12000 rpm S: 1050 * 510 * 510 With touch sensor

Fanuc-180iS-M T:1050x560, S(xyz):820x510x510,ATC-30 Spindle6000rpm, with 9 tools

NC device: MSX-501Ⅲ, Travel amount : X-axis : 900mm x Y-axis : 800mm x Z-axis : 980mm, Table work surface : 630mm x 630mm, Spindle maximum rotation speed : 10,000min-1, Taper No.50.

professional-5 (super GL,4 control), T: 630 square 0.0001 division, S:900*800*1020 (Moiré scale), 50～20000rpm, Spindle: HSK-A100, ATC: 186, Retractable tool length automatic measuring device (contact type) Marposs touch sensor Through spindle (3.0MPa) 2APCs

professional-5 (super GL,4 control), T: 630 square 0.0001 division, S:900*800*1020 (Moiré scale), 50～20000rpm, Spindle: HSK-A100, ATC: 186, Retractable tool length automatic measuring device (contact type) Marposs touch sensor Through spindle (3.0MPa) 2APCs

Mazatrol-640M,Spindle BT40, Table size : 500 x 500mm, Spindle speed : 15000rpm.

Spindle BT40, Table size : 400mm, Spindle speed : 12000rpm.

Professional3, Table size : 800 x 800mm, Spindle speed : 10000 rpm, Stroke : X800 Y750 Z770mm, Spindle motor power : 30 kW.

NC: Professional-3,HSK-A100, ATC-60, Table size : 2200 x 1000mm, Stroke : X-axis: 2000 x Y-axis: 1350 x Z-axis: 1000 mm.

Control: Pro5,Table size : 2200 x 1000mm, Stroke : X2000 x Y1350 x Z1000mm, Maximum processing volume : 2000 x 1000 x 1350mm, Maximum loading mass : 10T, Main rotation: 15,000rpm.

NC: Pro-3, HSK-A63, 2APC, ATC-60, Table size : 550 x 550mm, Spindle Speed : 20000 RPM, 400 square.

BT50, ATC120, 6APC B axis 1 degree Chipcon Tool length, Table size : 800 x 800mm, Maximum Speed : 8000rpm, Main motor : max 219 kw, Weight : 38050kg.

Table size: 1500✕1200mm, Table maximum load: 10000kg, Minimum indexing angle: 0.0001°, Stroke of each axis: X1500 (table left and right), Y1300 (head up and down), Z1300 (spindle front and back), Spindle speed: 20-15000rpm.

Table size : 1250*1600mm, Spindle speed : 15000rpm, Stroke of each axis: X2100 (table left and right), Y1560 (head up and down), Z1580 (spindle front and back), Table maximum load : 5000kg.

Pallet Size : 400 mm x 400 mm, X - Axis Travel : 560mm, Y - Axis Travel : 610mm, Z - Axis Travel : 560mm, Spindle Speed : 12000 rpm, Table indexing angle: 1/1,000°.

NC:Pro5 HSK-A63, Maximum spindle speed : 20000min-1, ATC60, Travel: (X) 560 mm (Y) 560 mm (Z) 600 mm, Pallet Size: 400 x 400 x 2APC, Max.Work Piece Mass: 400 KG, Spindle rotation speed: 20000 rpm, Feedrate Rapid: 60000 mm/min, Cutting Feeding Speed: 1 - 45000 mm/min, Arbitrary indexing 2APC Center through specification Chip conveyor (later output) Touch sensor Tool length measurement.

Control device Professional 5, Spindle HSK-A100, 10,000rpm, 1 degree indexing table, 60 ATC, pallet size 500mm, Travel: (X) 730 mm (Y) 730 mm (Z) 800 mm,From pallet center : 50~850mm, Pallet Size: 500mm, 2 pallets, Moire scale feedback XYZ0,1μm, Through-spindle coolant (7,0MPa) and air, Cutting fluid temperature controller, left chip conveyor, automatic grease supply device.

Pro.5 Spindle : BBT40 high output, 14000 rpm, (BIG･PLUS) Built-in hale function, ATC-60, 400×2 PCs, Travel: (X) 560 mm (Y) 560 mm (Z) 600 mm, Pallet Size: 400 x 400 x 2APC, Max.Work Piece Mass: 400 KG, Spindle rotation speed: 20000 rpm, Feedrate Rapid: 60000 mm/min, Cutting Feeding Speed: 1 - 45000 mm/min, Spindle Coolant: Through Spindle Coolant.

Professional-3, Table size : 3000×1500mm, S(X/Y/Z): 2500×1600×1300mm, 15000rpm, Distance b/w table top surface and spindle center line 100~1700mm, Distance b/w table edge and spindle edge : -200~1100mm, Origin of each axis : X- axis center of stroke, Y-axis Positive end of stroke, Z-axis Positive end of stroke, Table format : Blend table type, Table top height : 1280 mm from the floor, Maximum workpiece shape (length *width * height) : 2500 * 1700 * 1900mm, Maximum loading weight on the table : 15000 kg, Tool storage capacity : 5,Tool dia : 125mm, Maximum tool length : 450mm, Maximum tool mass : 8 kg,Tool maximum allowable moment : 9.8 N-M (1kgf-m), Tool selection method : random selection (fixed address method), ATC: 60, AAC: 25° angular 300mm, Extension Super GI Chipcon.

Professional 3 (F-16M),HSK-A63RPM : 20,000rpm,T:630*630, 2-pallet swivel,B: 1° indexing, XYZ:800*750*770,Spindle through coolant.

Pro3 control, s: 560 * 560 * 600, spindle 14,000 rpm, BBT40, ATC 60, 2 pallets 400 square, rear tip conveyor, NC rotary table (0.001 degree indexing, simultaneous 4-axis control)

Mazatorol-640M, BT50, ATC 120,T: 1250 * 1600, 2 Palais, Spindle speed 15000 rpm, S: X2100 * Y1560 * Z1580 ,Arbitrary index, Chip conveyor Table maximum loading mass 5000kg Center through (7MPa)

Travel (X axis): 1500 mm, Travel (Y axis): 1300 mm, Travel (Z axis): 1000 mm, Travel (B axis): 0.0001, Spindle : HSK-A100 , Spindle Speed: 20-15,000 rpm, ATC: 30 pcs, Table: 1500*1200. Spindle through Single-sided cool Chipcon Scale: XYZB Super Gl

NEW MACHINE!! Professional-5 BT50 P:630x630(2APC)S(XYZ)900x800x1020(scale feed back) Spindle through coolant