TECH CAPACITY : working height : 1800mm

REFERENCE NUMBER : L81, Ensures a working height of 1800mm even for vehicles with different heights, All models can be changed to the base embedded type (-F) to make the floor surface flat., Chain Synchronization, This model (NSP30) is recommended for customers with low ceilings where a gate type cannot be installed, or for customers who are servicing high-riding vehicles such as campers.

TECH CAPACITY : L139

REFERENCE NUMBER : L139.

TECH CAPACITY : 5 RACK

REFERENCE NUMBER : L72.

TECH CAPACITY : 5 RACK

REFERENCE NUMBER : L65

TECH CAPACITY : input current : 10a

REFERENCE NUMBER : L63, Input current : 10A, Welding current : 30, Input Voltage Single-Phase : 100 V/10 A, Output current : 30, Input Frequency : 50/60Hz, Quality : Approximately 8.2kg, Size : Height 220 * Width 180 * Depth 360mm.

TECH CAPACITY : Specimen capacity (150x70x1mm each) : 72 pcs

REFERENCE NUMBER : L49, Specimen capacity (150x70x1mm each) : 72 pcs, Holding angle can be set at 15deg or 20deg, the installation method must be considered, Spray Chamber Temperature : 35 plus or minus 2drgC, Salt water concentration : 50 plus or minus 5g/L, Salt Water pH : 6.5~7.2, Test Chamber Internal Dimension : width 900 * depth 600 * height 500mm, Number of test piece that can be placed : MAX 48 pieces.

TECH CAPACITY : Measurement load: 1 to 250kN

REFERENCE NUMBER : L52, (photo on the left) - Measurement load: 1 to 250kN Normal use: up to 150kN, Test speed: 0.05 to 500mm/min, Test piece dimensions: Round bar Φ4 to 30mm, Flat plate t to 25.5 x w to 50mm, Driving distance: Approximately 550mm, Auxiliary equipment: SEI automatic extensometer. (photo on the right) - Measurement load: 0.25 to 250kN Normal use: up to 220kN, Test speed: 0.0005 to 500mm/min, Driving distance: Approximately 1200mm, Width between pillars: 595mm, Auxiliary equipment: 3-point bending test jig, Measurement load: up to 100kN Normal use: up to 80kN.

TECH CAPACITY : 1.5ton

REFERENCE NUMBER : L51, 1.5ton.

TECH CAPACITY : WHEEL:206*19*1588(2400m/min)

REFERENCE NUMBER : L71, Wheel : 206*19*1588(2400m/min), 3Phase, Frequency : 50~60Hz, Volt 200V, RPM : 3000~36000mm.

TECH CAPACITY : DOUBT

REFERENCE NUMBER : L64.

TECH CAPACITY : MOUNTING DIA : 50MM

REFERENCE NUMBER : L57, Mounting dia : 25,30,40,50mm, Mounting Pressure : 50-350bar, Heating time : 1-15min in steps of 0.5min, LED Backlight : 320*240dots, Voltage : 200-240V, Frequency : 50-60Hz, Dimension and Weight : width 480mm, Depth 560mm, Height 550mm, Weight 34kg.

TECH CAPACITY : MOUNTING DIA : 50MM

REFERENCE NUMBER : L56, Mounting dia : 25,30,40,50mm, Mounting Pressure : 50-350bar, Heating time : 1-15min in steps of 0.5min, LED Backlight : 320*240dots, Voltage : 200-240V, Frequency : 50-60Hz, Dimension and Weight : width 480mm, Depth 560mm, Height 550mm, Weight 34kg.

TECH CAPACITY : Rotated voltage : 200V

REFERENCE NUMBER : L50, Rotated voltage : 200V, No-load rotation speed : 1560rpm, Grinding wheel diameter : 455mm, Grinding wheel thickness : 3.5mm, Power frequency : 50Hz, Motor output : 7.5KW.

TECH CAPACITY : WEIGHT : 100kg

REFERENCE NUMBER : L70, Using power : AC200V 3 phase, Electric Motor for Belt : 0.75Kw, Electric Motor for Pump : 20W, Polishing belt width 100 x Length 915mm, Belt Speed : 50~630m/min, Polishing Surface Dimension : Width 100 x Length 210mm, Polished Surface Height : 900mm, Circulation Water tank : Width 320 * Depth 260* Height 210mm, Machine Dimension : Width 510 * Depth 510* Height 955mm, Weight : 100kg.

TECH CAPACITY : AC 100V

REFERENCE NUMBER : L69, AC 100V, 50/60 HZ.

TECH CAPACITY : MOUNTING DIA : 50MM

REFERENCE NUMBER : L58, Mounting dia : 25,30,40,50mm, Mounting Pressure : 50-350bar, Heating time : 1-15min in steps of 0.5min, LED Backlight : 320*240dots, Voltage : 200-240V, Frequency : 50-60Hz, Dimension and Weight : width 480mm, Depth 560mm, Height 550mm, Weight 34kg.

TECH CAPACITY : Rotated voltage : 200V

REFERENCE NUMBER : L61, Rotated voltage : 200V, No-load rotation speed : 2350rpm, Grinding wheel diameter : 255mm, Grinding wheel thickness : 1.2mm, Hole diameter : 31.75mm, Power frequency : 50Hz, Motor output : 2.2KW.

TECH CAPACITY : Rotated voltage : 200V

REFERENCE NUMBER : L62, Rotated voltage : 200V, No-load rotation speed : 2350rpm, Grinding wheel diameter : 255mm, Grinding wheel thickness : 1.2mm, Hole diameter : 31.75mm, Power frequency : 50Hz, Motor output : 2.2KW.

TECH CAPACITY : Cutting Capacity : Max φ50mm

REFERENCE NUMBER : L54, Cutting Feed Rate : Can be set in the range of 1.2 to 19 mm/min in increments of 0.2 to 0.3 mm/min, Cutting wheel rotation speed : Can be set in 50 rpm increments within the range of 200 to 5000 rpm, Automatic cutting travel distance : Can be set in the range of 0.25 to 200 rpm in 0.25 mm increments, Cutting Capacity : Maximum: φ50mm, Maximum: 150L x 50D x 13Hmm, Maximum dimensions are when using a φ8 inch cutting wheel., Sample positioning : Manual micrometer feed of 2μm, Control : Microprocessor controlled 64 x 240 pixel LCD display Touchpad control buttons, Cutting wheel diameter : 4 inches to 8 inches, Cooling System : Built-in recirculating cooling system, tank capacity 4 liters, Power supply/voltage : Single phase AC84V～264V 50/60Hz 700W 9/3A, Dimensions & Weight : 546W×750D×337Hmm, 59Kg, Main Motor Power : 1.25HP, 950W.

TECH CAPACITY : 600 rpm

REFRENCE NUMBER : L55 ,Rotation speed: 50 rpm to 600 rpm.

TECH CAPACITY : Disc Diameter : 305mm/12inch

REFERENCE NUMBER : L59, Disc Diameter : 200-300/305mm/8inch-12inch, Rotational Speed : 150/300rpm, Rotational Direction : Anti-clockwise, Motor : 300w/0.41 HP at 150 rpm, 600W/0.82HP at 300rpm, Torque at disc : Continuous 19Nm/14lbs.ft, Dimension and Weight : with 515mm, Depth 720mm, Height 335mm, Weight 42.5kg.

TECH CAPACITY : Test load: 150 kg

REFERENCE NUMBER : L77, Test load: 60, 100, 150 kg, Reference load: 10 kg, pressure Maximum specimen height: 190 mm (L type 295 mm), Reference load setting: Automatic setting method (LED level meter, electronic buzzer), Start method: Automatic, manual (start switch), Load holding time: 1 to 99 seconds, Plastic mode: One-touch set, Hardness conversion function: ASTM-E140, Pass/fail judgment function: OK/NG judgment (maximum and minimum value input), Maximum specimen depth: 165 mm.

TECH CAPACITY : Dimensions : 1200 (W) x 1910 (H) x 1320 (D) mm

REFERENCE NUMBER : L78,L78-A,L78-B,L78-C,L78-D,L78-E, Dimensions : 1200 (W) x 1910 (H) x 1320 (D) mm, Mass : Approx. 1060 kg (core unit).

TECH CAPACITY : Focus range : 220mm

REFERENCE NUMBER : L40, Focus range : 220mm, Measuring range : X 300mm, Measuring range : Y 100mm,.

TECH CAPACITY : Observable image size:10000 (H) pixels x 10000 (V) pixels

REFERENCE NUMBER : L75, Observable image size:10000 (H) pixels x 10000 (V) pixels (when stitched), Lamp : 12 V, 100 W, Halogen lamp, Lamp life : 1000 hours (average), Colour temperature : 3100 K (at maximum light intensity).