Stocks List

« Previous Next » Show All Pagewise Showing 1 - 81 Records 81 Stock(s) Found!

GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CONVENTIONAL       TYPE : HORIZONTAL MILLER
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
151800 HITACHI SEIKI 3ML-P N/A N-4207
TECH CAPACITY : T:1400 x 700
Horizontal Milling Machine, Spindle Speed : (30-1500) RPM x axis : 1400 mm y axis : 400 mm z axis : 600 mm Table Size : 1400*700 mm Motor Power : 7.5 KW Operating Volt : 400 V
India
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CONVENTIONAL       TYPE : SURFACE GRINDING
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
151962 OKAMOTO PSG-63DX 1997 13583
TECH CAPACITY : T:300x600
Magnetic Table : 600 x 300mm, Wheel Dia : 355/305 OD x 127 ID x38thick mm,Spindle speed : 1500/1800mm , Motor : 3.7 Kw, with Magnetic Separator,Dust Collector and Coolant System.Also 2 axis Digital, Micro Feed Handle.
INDIA
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CONVENTIONAL       TYPE : CENTERLESS GRINDER
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
152241 NISSIN HI-GRIND2 2010 N/A
TECH CAPACITY : φ:610x205mm
Many accessories such as Magsepa High-end product Grindstone rotation speed inverter With separate work loader type before and after the main body (Although it is a single unit separate interlocking specification, it can be easily separated when not in use and the main body is a normal specification as a general-purpose machine)
JAPAN
152240 NISSIN HI-GRIND-1-D 1990 N/A
TECH CAPACITY : φ:510x50mm
Through type Whetstone dimensions: φ455 * 150, Capacity : φ1 ~ ?75, Grindstone hydraulic bearing Adjusting vehicle hydraulic pressure bearing Adjustment car table slide static pressure guidance Lead screw Ball screw Coolant paper filter type.
JAPAN
152239 NISSIN GR200-45N 1991 N/A
TECH CAPACITY : ?:510X205MM
Whetstone dimensions: 510 * 205 Whetstone shaft Adjustable axle co-static pressure Coolant device (with magsepa)
JAPAN
152238 NISSIN GR200-45N 2010 N/A
TECH CAPACITY : Φ:510X205MM
Grinding capacity: ?1.5-110mm Grinding wheel: ?510 * 205 * ?30 4.8mm Peripheral speed: 2000m / min Adjusting whetstone: ?255 * 205 * ?127mm 18-200 rpm (60 Hz) Infeed
JAPAN
152237 NISSIN ECOGRIND-100R 2005 N/A
TECH CAPACITY : ?:250X150MM
Fines supply device (with FP straight feeder), Sulfeed grinding table for fines, supply pipe receiver / discharge shooter, grinding fluid purification device magnet separator (40 liters), reversing device and hanger for replacing both grindstones, water shield cover
JAPAN
152236 NISSEI MG16 1992 N/A
TECH CAPACITY : φ:455x150mm
2008 Manufacturer overhaul Grinding capacity: ?1-60mm Grinding wheel: ?405 * 150mm Adjusting whetstone: ?230 * 150mm 1450rpm
JAPAN
152235 MICRON MD-600?-15D 1995 N/A
TECH CAPACITY : φ:610x305mm
2021 OH finished Processing diameter: ?3-100mm Grinding wheel: ?610 * 305 * 304.8mm Adjusting whetstone: ?330 * 305 * 203.2mm Turning angle: (Feed angle) -1
JAPAN
152234 MICRON MD-450A 1984 N/A
TECH CAPACITY : ?:455x150mm
Through feed Whetstone diameter: 455 * 150 Coolant device (Spiclon type) Diamond wheel Jib crane
JAPAN
152233 MICRON MD-450-SP 1984 N/A
TECH CAPACITY : ?:455x150mm
* O / H at the manufacturer in 2005 Workpiece ??Diameter ?1mm ? ?50mm ??Maximum grinding length (in feed) 150 mm Grinding wheel ??Dimensions: Outer diameter ?455 * Width 150 * Inner ?228.6mm ??Peripheral speed 2400m / min Maximum peripheral speed 2700m / min Adjusting whetstone ??Dimensions: Outer diameter ?230 * Width 150 * Inner ?101.6mm ??Rotation speed 23-200 rpm (continuously variable transmission) motor ??Grinding wheel: Standard / 7.5kw Maximum / 15kw Adjusting wheel 0.75kw Hydraulic pump 0.4kw ??Grinding liquid pump 0.15kw pump ??Hydraulic: Type / Vane pump capacity 3L / min ??Grinding liquid: Type / External fan type Capacity 80L / min Lubrication ??Sliding surface: Manual lever pump Grindstone shaft: Grease worm gear: Oil bath Turning angle ??Adjusted vehicle feed angle + 6
JAPAN
152232 KOYO VAN3C 1983 N/A
TECH CAPACITY : ?:610x205mm
Whetstone: ?610 * 205mm Through feed No separator and coolant tank
JAPAN
152231 TOSHIN TECHNICAL Sigma-18 1997 N/A
TECH CAPACITY : φ:455x150mm
Whetstone dimensions: ?455 * 150 * ?228.6 (outer diameter * width * inner diameter) Grindstone peripheral speed: 2400m / min Adjustable vehicle dimensions: ?305 * 150 * ?177.8 (outer diameter * width * inner diameter)
JAPAN
152230 NTC CLG-1V-CNC 1990 N/A
TECH CAPACITY : φ:610x52mm
Whetstone: 610 x 52 x 304.8mm, Processing diameter: 1-50mm, Rated Voltage : 200V, No load rotation speed : 1400 rpm, Grinding wheel dia : 610mm, Grinding wheel thickness : 52mm, Grinding wheel hole dia : 304.8mm.
JAPAN
152229 NISSAN Hygra 2 2007 N/A
TECH CAPACITY : ?:610X220mm
Whetstone 610-220 Stop polishing product Both center holders move up and down
JAPAN
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CONVENTIONAL       TYPE : DRILLING MACHINE
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
151787 NAGAHAMA KRTG-420 N/A N/A
TECH CAPACITY : 19mm
SWING : 420 , DRILLING CAPACITY S45C : 4 *19 , DRILLING CAPACITY - FC200 : 4 *23 , MAX. DISTANCE SPINDLE TO TABLE : 485 , MAX. DISTANCE SPINDLE TO BASE : 720 , UP-AND-DOWN MOTION OF SPINDLE : 120, SPINDLE TAPER : MT 3 , DIA. OF COLUMN : 100 , SIZE OF A TABLE : 370 , SPINDLE SPEED : 50 , POWER SUPPLY : 380 , DRIVE MOTOR : 0.75kW 6P , TYPE OF V-BELT : A-34?A-27 , MACHINE TOTAL HEIGHT :1279 , NET WEIGHT : 130 , DIMENSION OF BASE : 340 * 600 , UP-AND-DOWN MOTION OF TABLE : 425
India
151786 IKK Radial Drill N/A 2859
TECH CAPACITY : 25mm
Drilling Capacity : 25 mm (1 Inch) Spindle Travel : 170 mm Spindle Speed First Range : (250-700) Rpm Second Range : (600-1800) Rpm Spindle Center to Column Distance Min : 200 mm Max : 890 mm Spindle Motor Power : 1.1 Kw Operating Voltage : 400 V Holder Type : Taper Shank Table size : 500 mm * 600 mm
India
151785 IKEGAI Radial Drill N/A N/A
TECH CAPACITY : 25mm
Drilling Capacity : 25 mm (1 Inch) Spindle Travel : 120 mm Spindle Speed First Range : (140-400) Rpm Second Range : (300-1000) Rpm Spindle Center to Column Distance Min : 190 mm Max : 570 mm Spindle Motor Power : 1.1 Kw Operating Voltage : 400 V Holder Type : Taper Shank Table size : 390 * 1145 mm
India
151784 IKEGAI Radial Drill N/A N/A
TECH CAPACITY : 25mm
Drilling Capacity : 25 mm (1 Inch) Spindle Travel : 170 mm Spindle Speed First Range : (140-400) Rpm Second Range : (300-1000) Rpm Spindle Center to Column Distance Min : 190 mm Max : 880 mm Spindle Motor Power : 1.1 Kw Operating Voltage : 400 V Holder Type : Taper Shank Table size : 390 * 1145 mm
India
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CNC GRINDING MACHINE       TYPE : CNC SURFACE GRINDER
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
152930 HITACHI SEIKO GHL-B409N 1988 N/A
TECH CAPACITY : φ:900x400
Chuck work surface : 900x400mm, Table left/right movement amount : 1050mm, Column longitudinal movement : 440mm, Grinding wheel spindle overhead vertical movement : 325mm, Distance between the center of the grinding wheel shaft and the top of the table : 175-500mm.
JAPAN
152929 OKAMOTO PSG-125B 1985 N/A
TECH CAPACITY : φ:500x1200
Table size : 1200 x 500mm, Width x height x length : 1200 x 600 x 500mm, Movement of table left and right : 1300mm, Movement of table front and back : 530mm, Top of the table : 850mm, Chuck dia : 600 x 500mm, Grinding wheel dia (dia x width x hole dia) : 510 x 50 x 127mm, Weight : 6500 kg.
JAPAN
152787 OKAMOTO PSG-157 1981 N/A
TECH CAPACITY : Φ:700X1500
Table : 1500 x 700mm,
JAPAN
152786 OKAMOTO PSG-208DX 1992 N/A
TECH CAPACITY : Φ:800X2050
Table size : 2050 x 800mm, Processing range (length x width x height): 2000 x 800 x 695mm, Stroke : Front/rear 860 x Left/right 2250mm, Grindstone: Outer diameter : 510 x 50mm, Inner diameter : 127mm.
JAPAN
152766 OKAMOTO PSG-205DX 1989 N/A
TECH CAPACITY : Φ:2000X500
Table size : 2050 x 500mm, Machining range of workpieces : 2000 x 500 x 595mm.
JAPAN
152337 OKAMOTO PSG-408DXNC 2006 N/A
TECH CAPACITY : φ:4000x800
Machining range of workpieces:4000*800*800 Table:4050*800 chuck dimensions:4000*800*100 Loading weight:3728kg T-groove width*number:20mm*3 S:4250*800*860 Whetstone:?510*100*?203.2 (50/60Hz)1000/1200rpm,SIZE : W11*D4.5*H3.78m, WEIGHT : 30T
JAPAN
152336 NICCO NSG-206 1992 N/A
TECH CAPACITY : φ:2000x600
Fanuc-0M 1500rpm T:2000*600*83(H) S:2300*660*620 Grindstone diameter:?510*50*?127(inner diameter)
JAPAN
152335 NAGASE INTEGREX SGC-94V 1998 N/A
TECH CAPACITY : φ:900x400
Vertical axis,T:900*400
JAPAN
152334 WASINO SE-52N2 1997 N/A
TECH CAPACITY : Φ:580X200
Fanuc-20F T:580*200mm Chuck:500*200*70mm X:600 Y:225mm 3600rpm
JAPAN
152333 TOSHIBA UHG-130C 2000 N/A
TECH CAPACITY : φ:500x200
Horizontal type
JAPAN
152332 OKAMOTO PSG-95DXNCAG 1999 N/A
TECH CAPACITY : φ:900x500
FANUC-0-M,Table movement amount:1050*540,Table work surface:950*500,Standard chuck size:900*500*110,Grindstone: outer diameter 355* width 38* inner diameter127(50Hz)/305*38*127(60Hz), Grindstone rotation speed:1500(50Hz)/1800(60Hz).
JAPAN
152331 OKAMOTO PSG-64EX 2000 N/A
TECH CAPACITY : φ:600x400
Okamoto Precision T:400
JAPAN
152330 NAGASHIMA NAS-420CNC 1995 N/A
TECH CAPACITY : Φ:400X200
F18M MG:400*200
JAPAN
151996 OKAMOTO PSG-125DX 1997 N/A
TECH CAPACITY : ?:500x1200
Chuck dimensions: 1200 x 500 Whetstone dimensions: ?510 x 50 x ?127 FX power supply
JAPAN
151995 OKAMOTO PSG-105DX 2009 N/A
TECH CAPACITY : ?:500x1000
?Mg chuck: 1000 * 500 ?Left and right-1150 Around -540 ?Loading weight: 700kg ??355 * 38 * ?127 ?Sliding surface high precision specifications ?Forward and backward fine movement feed ?Rotary dressing ?MB-3 microbalance device ?Upper dresser ?2-axis digital ?Automatic demagnetizer ?Oil cooler ?Mist collector ?Coolant with paper filter & Mg separator ?Kanetec Mg chuck: 450 * 150 * 100
JAPAN
151994 OKAMOTO PSG-95DX 1991 N/A
TECH CAPACITY : ?:900x500
FX power supply, chuck: 900 * 500, dust collection / water injection / magsepa / paper filter-, delivery after repainting
JAPAN
151993 OKAMOTO PSG-84DX 1988 N/A
TECH CAPACITY : ?:800x400
Whetstone outer diameter: 355 Thickness: 38 Hole diameter: 127 Rotation speed: 1800 rpm
JAPAN
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CNC GRINDING MACHINE       TYPE : CNC INTERNAL GRINDER
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
151805 TOYO T-1252 N/A 3092
TECH CAPACITY : Φ:5~150
Grinding Hole diameter: 20 - 250 mm, Grinding Length : 260 mm, Chuck diameter : 400 mm, Spindle speed : 2890 rpm, control system: Fanuc 18M, center height: 200 mm, X-axis Travel: 300 mm, Y-axis Travel: 200 mm, Z-axis Travel: 100 mm.
INDIA
151804 NACHI-FUJIKOSHI TG-15-142 N/A G7827
TECH CAPACITY : Φ:5~150
Multi Spindle: 3, Control: Fanuc -OG, ID Grinding Range : 5-150 mm, Chuck diameter: 320 mm. Grinding length : 150 mm, Swing with the cover : 400 mm, Swing over the table : 600 mm. X-axis travel: 250 mm, Z-axis travel:450 mm, X-axis Feed : 0.1-1000 mm/min, Z-axis Feed : 0.1-1000 mm/min.
INDIA
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CNC GRINDING MACHINE       TYPE : CNC CYLINDRICAL GRINDER
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
151978 KONDO GKA-350NC 2011 N/A
TECH CAPACITY : ?:150X350
Distance between centers: 350 Swing on the table ?350 Grinding maximum diameter ?150
JAPAN
151972 CONDO CGK-1200H 1989 N/A
TECH CAPACITY : ?:300X1200
Table swing: ?300, center spacing: 1200, steady rest? magnet separator
JAPAN
151629 TOYODA GE4P-100 2000 N/A
TECH CAPACITY : φ:320x1000
GC32, φ320 * 1000
151628 TOYODA GE4P-100 2003 N/A
TECH CAPACITY : φ:320x1000
N/A
151627 TOYODA GE4P-150 1995 N/A
TECH CAPACITY : φ:330x1500
GC32, φ320 * 1500
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CNC GRINDING MACHINE       TYPE : CNC CENTERLESS GRINDER
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
152928 NISSEI high ground 2 2007 N/A
TECH CAPACITY : φ:610x205mm
Whetstone 610 Stop polishing
JAPAN
152927 NISSIN HI-GRIND-2NC 1998 N/A
TECH CAPACITY : φ:610x205mm
F-18TB, Workpiece : φ2-100mm, Circumferential speed: 45m/s, Infeed width : 200mm, Grindstone: φ610*205*φ304.8mm, 1400rpm, 22KwUP, hydrostatic bearing, hydrostatic slide, Adjustment whetstone: φ355*205*φ177.8mm, 15-166rpm (stepless).
JAPAN
152926 NIPPEI TOYAMA NTC CLG-5BN 2003 N/A
TECH CAPACITY : φ:610x510mm
Fanuc 18i-TB, Grindable outer diameter : φ4~120mm, Maximum infeed grinding width : 500mm, Grinding wheel : φ610×510×φ304.8mm, Adjustment wheel : φ355×510×φ203.8mm, Adjustment wheel rotation speed : 10-250mm, Adjustment wheel inclination angle -2° to +5°, Grinding wheel drive motor : 37kw, Floor space : 3,300×1,600mm, Machine weight 10T.
JAPAN
152925 KOYO KC-300TH 2006 N/A
TECH CAPACITY : φ:610x305mm
6 axis NC, Processing range : φ1.6~φ120mm, Grinding wheel dimensions : φ610×305mm, Floor area: 2,470×1,975mm, Mass: 7T.
JAPAN
152924 KOYO 6015C 2011 N/A
TECH CAPACITY : Φ:610X150MM
FANUC, Power Mate I-D Processing diameter : φ1-60mm, Processing length : 150mm, Grinding wheel diameter : φ610*150*φ304.8mm, Grinding wheel : 1040rpm.
JAPAN
152923 MICRON PRECISION MD600III-4W15D-A 1986 N/A
TECH CAPACITY : Φ:610X405MM
Grinding wheel Diameter : φ610mm, Grinding wheel width 405mm, Hole diameter : φ304.8mm, Rotation speed : 2400m/min, maximum circumferential speed : 2400m/min.
JAPAN
152922 MICRON PRECISION MD-600?4W-15D-A 1993 N/A
TECH CAPACITY : Φ:610X405MM
Grinding wheel : φ610×W405mm, Through feed specification, FANUC 1-axis control machine requiring overhaul, current status Main unit only.
JAPAN
152921 KOMATSU CLG-5BN 2011 N/A
TECH CAPACITY : φ:610x510mm
Fanuc 18-T, Grindable outer diameter : φ4~120mm, Maximum infeed grinding width : 500mm, Grinding wheel : φ610×510×φ304.8mm, Adjustment wheel : φ355×510×φ203.8mm, Adjustment wheel rotation speed : 10-250mm, Adjustment wheel inclination angle -2° to +5°, Grinding wheel drive motor : 37kw, Floor space : 3,300×1,600mm, Machine weight 10T.
JAPAN
152846 SEKIGAHARA MANUFACTURING GKS-750 2005 N/A
TECH CAPACITY : Φ:250X100MM
NC: F-18iTB, Processing workpiece length : 177.0 to 284.5mm, Mounting cutter size : φ100, Spindle rotation speed : L400~1000mm R400~1000mm, Drill rotation speed : L1600 R1600mm, Outer diameter cutting : L1600, Drill spindle stroke : 60mm.
JAPAN
152717 MICRON PRECISION MD-600?-15D-SP-RDT-CNC-A 1996 N/A
TECH CAPACITY : φ:610x305mm
Fanuc16-T, Grindstone: φ610 x 305 x φ304.8, Processing diameter φ12-φ32, Feed angle -1degree~+5degree, Horizontal turning angle ±0.5degree.
JAPAN
152228 MICRON MD-600? 4W-GS-SP 2000 N/A
TECH CAPACITY : Φ:610X405MM
Fanuc-18T Whetstone: ?610 * 405 * ?304.8 Processing diameter ?25-?75 Whetstone 2000rpm
JAPAN
152227 MICRON MD-600?-15D-SP-RDT-CNC-A 1996 N/A
TECH CAPACITY : φ:610x305mm
Fanuc16-T Whetstone: ?610 * 305 * ?304.8 Machining diameter ?12-?32 Feed angle -1
JAPAN
152226 IMAHASHI SPG-2S N/A N/A
TECH CAPACITY : Φ:250X100MM
Fanuc Power Mate
JAPAN
152225 KOYO KC-400A 1995 N/A
TECH CAPACITY : ?:455x150mm
Fanuc Power Mate Maximum grinding diameter: ?150 With separator and oil tank
JAPAN
152224 MICRON MD-450 I-RT-RDT 2007 N/A
TECH CAPACITY : Φ:405X150MM
FANUC Power Mate Machining diameter ?1-50 Machining length 145 Grindstone diameter ?400 * 150 * ?228.6
JAPAN
152223 MICRON MD-450-SP-CNC-SA 1995 N/A
TECH CAPACITY : ?:455x150mm
TECH CAPACITY: ?455*150,SPEED:2700mm,voltage:200
JAPAN
151997 MICRON MD-600? 4W-RDT-SA 1997 N/A
TECH CAPACITY : Φ:250X100MM
? Grinding wheel: ?610
JAPAN
151636 MICRON MD-450I-RT-SP 2007 N/A
TECH CAPACITY : φ:455x150mm
Fanuc Power Mate, Wheel diameter: φ455 * 150 Double-sided bearing, Infeed
151635 MICRON MD-450I-RT-SP 2001 N/A
TECH CAPACITY : φ:455x150mm
Fanuc Power Mate, Whetstone diameter: φ455 * 150, Doubly supported bearing, Infeed
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CNC GRINDING MACHINE       TYPE : CNC ROLL GRINDER
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
152661 SHIBAURA KWA-10110C 1995 N/A
TECH CAPACITY : Φ:100x1000
FANUC-30iA, Grinding diameter : φ100~1000mm, Center distance 11000mm, Stroke : X630, Z 11,100mm, Spindle : 50rpm, Grindstone : 450~1350rpm, Grindstone Outer diameter : 915mm, Width : 100mm, Maximum processing weight : 25t.
JAPAN
152660 KARATS RGT-6N 2003 N/A
TECH CAPACITY : φ:610x4200
Fanuc 18i-T, Grinding diameter : φ610*4200mm, Center distance : 3000kg.
JAPAN
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CNC GRINDING MACHINE       TYPE : CNC WORMSHAFT GRINDER
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
151338 MATRIX NO.16 N/A N/A
TECH CAPACITY : φ:50 x 278
Max.Work Piece Dia: 50 mm, Distance of Centers: 278 mm, Axial Travel: 178 mm, Cut-in Amount: 0.4 - 38 mm
151336 WASHINO GDW-18R 1989 N/A
TECH CAPACITY : φ:20 x 205
Max.Work Piece Dia: 20 - 205 mm, Axial Travel: 0 - 40 mm, Cut-in Amount: 40 mm, Grinding Stone Size: 200 * 20 * 50.8 mm
JAPAN
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CNC GRINDING MACHINE       TYPE : CNC ANGULAR GRINDING MACHINE
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
151807 NTC CGN-6A N/A N2L91037
TECH CAPACITY : CHUCK:Φ150X270
Grinding wheel speed : 1400 rpm, Grinding Wheel spec : 610 OD x 254 ID x 75/150 thick mm,Chuck dia: 150 mm, Center height: 190 mm, Between Center: 270 mm, Spindle Motor Power: 7.5 Kw, Operating voltage: 400 V, Control: Fanuc OG.
INDIA
151806 LANDIS NTC 3SPL-A14*40 1989 N2C89175
TECH CAPACITY : CHUCK:Φ150X270
Center Height: 175 mm,Between Center: 850 mm, Chuck diameter: 300 mm, X- axis travel : 700 mm, Y- axis travel : 450 mm, Z- Axis travel : 1750 mm, Grinding Wheel Speed: 3000 rpm, Grinding Wheel spec : 760 OD x 304.8 ID x , 85/150 mm, Motor Power: 15 KW, Control: FUNUC OG.
INDIA
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CNC GRINDING MACHINE       TYPE : CRANKSHAFT PIN GRINDING
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
152746 NIPPEI TOYAMA NTC NTG-CK32100 2000 N/A
TECH CAPACITY : Φ:30~70
F-16T, Swing on the table: Φ320, Between fixtures: 580, Grinding diameter: dia30~dia70 Stroke(XY) : 425 x 530mm, Crank head speed : 1~200mm, Floor space (A20) : 5300mm, Machine weight : 16,000kg.
JAPAN
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CNC DRILLING MACHINE       TYPE : DEEP HOLE DRILLING
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
152350 TOSHIBA MGC315B 1996 N/A
TECH CAPACITY : φ3~30
Tosnuc 888 Total Table:1600*1600 with manual Machining diameter: φ3-30
JAPAN
152349 MIROKU MACHINE NKEG-300-1NC 2005 N/A
TECH CAPACITY : Φ1~5
Hole diameter 1~5Φ Working length 300 F-21iT
JAPAN
152348 MIROKU MACHINE MSG-200-1NC 2003 N/A
TECH CAPACITY : φ5~8
Hole diameter φ5~8 depth 200 4500rpm inverter speed change
JAPAN
152347 MIROKU MACHINE MEG-1200-NC 1997 N/A
TECH CAPACITY : Φ:4~24
FANUC18M, 1 axis, Hole diameter: Φ4-24, Drilling depth: MAX 1200mm, Rotation speed: 580-5250rpm, Table: 1000mm x 1500mm, Loading weight: 2000kg, Left/right stroke: 780mm, Vertical stroke: 480mm, Feed rate (cutting feed): 0 to 500 mm/min, Feed speed (fast forward): 5 m/min, Main tank capacity: 850L, Auxiliary tank: 350L, High pressure pump: 105kg/㎠ 50L/min, Filter: 75μ, Chip conveyor: 60L/min, Chip delivery: 30L/min, Motor: Total capacity 14.5Kw (21KVA) 200V 50Hz, Machine dimensions : 6000mm×2800mm, Machine weight T : 8
JAPAN
152346 TECHNO RIVERBED KS-907 1999 N/A
TECH CAPACITY : Φ:5~20
Hole diameter: φ5 to φ20 mm Hole depth: 130 to 1500 mm Spindle speed: Low speed 800 to 3800 rpm (stepless) High speed 1500 to 6500 rpm (stepless) Control: FANUC Power Mate 0
JAPAN
152345 TECHNO RIVERBED KS-1202 2000 N/A
TECH CAPACITY : Φ:5~25
FANUC POWER MATE D Machining capacity: Hole diameter φ5-25 Hole depth 300-1150 Spindle 6000rpm Work rotation 150rpm Work steady rest 2 places Tank capacity clean 800L dirty 300L
JAPAN
152344 MIROKU MACHINE MEG-1200NC 1998 N/A
TECH CAPACITY : Φ:4~24
"Fanuc18M,1 axis,Machining ability:φ4~24,520~5,250rpm,table:1000*1500 Left and right stroke:780,Vertical stroke:480,hardness HRC-40 possible,Electric motor:14.5kw,SIZE : 5.9*3.4m,WEIGHT : 9t"
JAPAN
151808 KANZAKI KOKI BTA-GD N/A 273
TECH CAPACITY : φ:20~55 x 800
Control : Mitsubishi MRP20 Gun Drill: min,max hole size : 8 mm to 25 mm drill travelling length : 800 mm (max) BTA : min,max hole size : 20 mm to 55 mm drill travelling length : 800 mm (max) Spindle Motor Speed : (500 - 3000) rpm Tool Head Speed : 1150 rpm (max) Feed Rate : (10 - 1000) mm/min Spindle Motor: 22 Kw Operating Voltage : 400 V Oil Tank capacity : 3000 ltrs pallet type : indexing type
INDIA
151678 DANICHI dL95BTA/1000 1997 N/A
TECH CAPACITY : φ:20~250 x 4000
Fanuc Powermate D, Clear hole diameter: φ30 ~ φ250, Perforation depth: 1000 to 4000, Processing method: BTA method,
JAPAN
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CNC MILLING MACHINE       TYPE : CNC VERTICAL MILLER
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
151961 IWASHITA NK-NC350 1983 137
TECH CAPACITY : T:1300x385mm
Bed Type Milling Machine, Spindle speed : 90 To 2700 rpm, X axis: 890mm, Y axis: 390mm, Z axis: 520mm
151809 IWASHITA NK-NC350 N/A 137
TECH CAPACITY : T:1300X385
X-axis: 890 mm, Y-axis:390 mm,Z- axis:520 mm,Spindle Speed:90 ~2700 rpm,Table Size:1300 x 385 mm,Spindle Motor:5.5 Kw, Operating Voltage: 200 V.
INDIA
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : WIRE CUT       TYPE : SMALL HOLE WIRE CUT
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
151992 SODICK AP-200L 2000 N/A
TECH CAPACITY : TABLE SIZE:220x150
Oil specifications, power supply LN1W, stroke XYZ 220
JAPAN
« Previous Next » Show All Pagewise Page: 1 of 1
81 Stock(s) Found!
8