TECH CAPACITY : 1200T

Capacity : 1200t, Stroke Length: 250 mm, Idle Continuous Stroke Rate: 15-40 spm, Intermittent Stroke Rate: 25 spm at 12 spm, Micro-Inching: Approx. 10 spm, Die Height: 750 mm, Slide Adjustment: 100 mm, Slide Dimensions (LxW): 2450 x 1000 mm, Bolster Dimensions (LxW): 2450 x 1200 mm, Bolster Thickness: 250 mm, Bolster Surface Height from Floor: 800 mm, Maximum Die Hanging Weight: 4.0 tons, Side Opening Dimensions (WxH): 1050 x 510 mm, Main Motor: INY 160 kw.

TECH CAPACITY : 1000T

Capacity : 1000t, Press Size: 3M width x 9M height, Die Height: 800 mm, Slide Dimension (Left to Right): 1000 mm, Slide Dimension (Front to Back): 1200 mm, Bolster Dimension (Left to Right): 1000 mm, Bolster Dimension (Front to Back): 1200 mm, Thickness: 200 mm, Slide Adjustment Length: 30 mm, Stroke Length: 500 mm, Number of Strokes: 15-20 spm (strokes per minute), Maximum Workload: 28 TON-M at 15 SPM, Main motor: 160Kw/DC, Press Weight: Approximately 160 tons.

NEGOTIATED

TECH CAPACITY : 600T

Capacity: 600 T, Stroke: 148 mm, SPM: 40, Die Height: 540 mm, Bolster size: 630 mm * 900 mm * 120 mm, Slide size: 540 mm * 600 mm, Slide Adjustment: 50 mm, Motar : 37 Kw.

TECH CAPACITY : 1200T

Capacity: 12000 kN, Shut Height: 1200mm (stroke down, adjust up), Stroke Length: 300mm, Stroke Rate: 30 spm.

TECH CAPACITY : 1600T

Capacity : 1600ton, Die Height : 820mm, Stroke length: 280 mm, number of Stroke per minute : 60 - 80spm, Slide dimensions (left to right x front to back) : 920mm x 1000mm, Bolster dimensions (left to right x front to back) : 1050mm x 1200mm, Slide adjustment : 17mm, Main motor : 75 Kw.

TECH CAPACITY : 50t

N/A

TECH CAPACITY : 800t

Press Capacity : 800 Ton, Size : 4.5M width x 8M height, Die Height : 1100 mm, Slide Dimension ( Left to Right ) : 1200 mm, Slide Dimension ( Front to Back ) : 1000 mm, Bolster Dimension ( left to Right ) : 1200 mm, Bolster Dimension ( Front to Back ) : 1050 mm, Slide Adjustment Length : 100 mm, Stroke Rate : 15-20 spm, Stroke Length : 400 mm, Maximum Workload : 12 Ton-M at 15 spm, Main Motor : 185 Kw/Dc, Press Weight : Approximately 100 Tons.

NEGOTIATED

TECH CAPACITY : 1000T

Capacity : 1000t, Press Size: 3M width x 9M height, Die Height: 800 mm, Slide Dimensions:Left to Right: 1000 mm, Front to Back: 1200 mm, Bolster Dimensions:Left to Right: 1000 mm, Front to Back: 1200 mm, Slide Adjustment Length: 30 mm, Stroke Length: 500 mm, Stroke Rate: 15 to 20 strokes per minute (SPM), Maximum Workload: 28 TON-M at 15 spm Main Motor: 160Kw/DC, Press Weight: 180t.

TECH CAPACITY : 1600T

Capacity : 1600t, Press Size: 4M width x 9M height, Die Height: 800 mm, Slide Dimension (Left to Right): 1550 mm, Slide Dimension (Front to Back): 1200 mm, Bolster Dimension (Left to Right): 1550 mm, Bolster Dimension (Front to Back): 1200 mm, Thickness: 200 mm, Slide Adjustment Length: 30 mm, Stroke Rate: 15-20 strokes per minute (SPM), Stroke Length: 430 to 600 mm, Maximum Workload: 45 TON-M at 15 SPM, Press Weight: Approximately 270 tons.

TECH CAPACITY : 1200T

Capacity : 1200t, Die Height: 800 mm, Slide Dimension (Left to Right): 1000 mm, Slide Dimension (Front to Back): 1200 mm, Bolster Dimension (Left to Right): 1000 mm, Bolster Dimension (Front to Back): 1200 mm, Thickness: 200 mm, Slide Adjustment Length: 30 mm, Stroke Length: 500 mm, Number of Strokes: 15-20 spm (strokes per minute), Maximum Workload: 30 TON-M at 15 SPM, Main Motor: 170Kw/DC, Press Weight: Approximately : 190t.

TECH CAPACITY : 630T

Capacity : 630t, Press Size: 2.5M x height 6.5M, Die Height: 800 mm, Bolster Dimension (LR): 800 mm, Bolster Dimension (FB): 1050 mm, Slide Dimension (FB): 1050 mm, Slide Dimension (LR): 800 mm, Stroke Length: 400 mm, Slide Adjustment Length: 50 mm, Number of Strokes: 15 to 25 per minute, Maximum Workload: 13 TON-M at 15 spm, Main Motor: 90 Kw/DC, Press Weight: Approximately 80 tons (reference value).

NEGOTIATED

TECH CAPACITY : 800t

Capacity : 800t, Stroke length : 400mm, Number of stroke : 15~30 spm, Bolster dimension (left and right x front and back) : 1040 x 1280mm, Slide dimension (left and right x front and back) : 1040 x 1280mm, Die height : 1200mm, Slide adjustment : 50mm, Main motor : 185kW, Maximum stop time : 285ms, Supply air pressure : 0.5MPa.

TECH CAPACITY : 1000T

Capacity : 1000t, Stroke length : 500mm, Number of stroke : 15~20 spm, Bolster dimension (left and right x front and back) : 1000 x 1200mm, Slide dimension (left and right x front and back) : 1000 x 1200mm, Die height : 800mm, Slide adjustment : 30mm.

TECH CAPACITY : 630T

Capacity : 630t, Stroke length : 400mm, Number of stroke : 15~25 spm, Bolster dimension (left and right x front and back) : 800 x 1050mm, Slide dimension (left and right x front and back) : 800 x 1050mm, Die height : 800mm, Slide adjustment : 50mm, Main motor : 90kW, Maximum stop time : 243ms.

TECH CAPACITY : 400T

Capacity : 400t, Stroke length : 220mm.

TECH CAPACITY : 1200T

Capacity : 110t, Stroke length : 200mm, Number of stroke : 70spm, Die height : 390mm, Slide adjustment : 100mm, Slide dimension(left and right x front and back) : 600 x 500mm, Bolster dimension(left and right x front and back) : 1100 x 700mm, Bolster thickness : 150mm, Servo motor : 30kw.

TECH CAPACITY : 630T

Capacity : 630t, Stroke length : 220mm, Number of stroke : 25~40spm, Die height : 500mm, Slide adjustment : 15mm, Slide dimension(left and right x front and back) : 700 x 600mm, Bolster dimension(left and right x front and back) : 800 x 700mm, Main motor : 45kw, Supply air pressure : 5kgf/cm square, Maximum stop time : 220ms.

TECH CAPACITY : 4000T

Capacity : 4000t, Number of strokes : 45spm, Stroke length : 406mm, Main shaft dia at Journals : 686mm, Main shaft dia at Eccentric : 1048mm, Width of Eccentric Bearing : 812mm, Shut height with top knockout plate : 984mm, Shut height without top knockout plate : 1092mm, Die seat (left to right x front to back) : 1568 x 1625mm, Ram face (left to right x front to back) : 1422 x 1346mm, Approximate net weight : 460,000Lbs.

TECH CAPACITY : 1600T

Capacity : 1600t, Press Size: 5M width x 9,5M height, Die Height: 100mm(1150mm), Slide Dimension (Left to Right): 2200 mm, Slide Dimension (Front to Back): 1360 mm, Bolster Dimension (Left to Right): 2550 mm, Bolster Dimension (Front to Back): 1120 mm, Thickness: 250 mm, Slide Adjustment Length: 100 mm, Stroke Length: 800 mm, Stroke Rate: 17-35 (5-6), strokes per minute (SPM), Slide Knockout – Air Normal Pressure Type, Press Weight: Approximately 350 tons, Main Motor: 315 Kw/AC.

NEGOTIATED

TECH CAPACITY : 2500T

Capacity : 2500t, Stroke : 360mm, Shut height : 1000mm, Number of stroke : 70spm, Slide Adj : 7 mm, Ram size (left to right x front to back) : 1400 x 1400 mm, Bed size (left to right x front to back) : 1500 x 1400 mm.

TECH CAPACITY : 1600T

3 STAGE DIE SET -- Length : 1260mm, With : 1200mm, Height : 785mm.

TECH CAPACITY : 2.2T

Dropping Section weight : 2250 Kg, Normal Die Weight : 450 Kg (Maximum) Maximum Stroke : 950 mm, Guide Distance : 590 mm, Die Thickness : 350 mm, Ram Bottom Surface size : 570 w * 550 mm, Inlet Pipe Size : 100 (A) (4B), Exhaust Pipe Size : 125(A) (5B), Maximum Stamping Force : 6800 Kg-m, Required Air Compressor Capacity ; 110 Kw, Maximum Air Pressure : 7 Kg/cm2

TECH CAPACITY : 450T

Capacity : 450 Ton, Stroke Length : 50 mm, Number of Stroke : 28 SPM, Diameter : 50-90mm, Main Motor : 45 KW 8P, Excentric Lubricating Motor : 0.75KW 4P, Slide Lubricating Motor : 0.02KW 4P, Feeding Speed : 3~12m/min, Feeding reducer Motor : 3.7KW 4P, Feeding Shaft Adjust Motor : 0.4KW 4P, Stock Feeding Motor : 0.75KW 4p

TECH CAPACITY : 16000T

Capacity: 16000 Ton, Wedge Press KP 160000, RAM Stroke: 600 mm, RAM Adjustment: 30 mm, Idle speed: Max. 25 min-1, Number of single stroke: Max. 5 min-1, Shut Height (ram down, adjustment up): approx. 2,000 mm, Horizontal between stands: 2500mm, Table surface: 2440mm LR x 3000mm FB, Ram face: 2380mm LR x 2800mm FB, Side window: Width x Height 1,700 x 2,300 mm, Motor data: 700kw (951.73 HP), Electrical data - Working voltage: AC 3x 660V, Control voltage: AC220V DC24V, Frequency: 50Hz, Rated current: 1150A, Connection power: 1300 KVA, Overall dimensions: 9740mm x 12100mm, Weight: 1750 tons (98 crates at Dalian port), 220-ton table (Shanghai), 430-ton Traverse Crown (Shanghai), 72 tons left and right rows (each) (Shanghai), Original Packaging Condition (CONDITION: Original Packaging Condition).

TECH CAPACITY : 200T

Capacity: 200 Ton, Cutting Diameter: 28-50 mm, Stroke Per Minute: 25 SPM, Length of Stroke: 100 mm, Cutting Length: 45 -300 mm, Motor: 400V 50HZ 15W x 4P, Speed: 1.1 - 60 m/min, Maximum Loading Capacity: 10 Ton