TECH CAPACITY : 800T

capacity: 800Ton, length of the stroke: 125mm, Stroke number: 20RPM cutting diameter:50-110mm, Brade length: 470mm, length:75-1.350mm, speed:300-600mm/sec, Motor:4P 55KW, Conveyor Motor:4Px5.5KW(8Px2.5KW), Air pressure:5Kg/cm2 weight:36t

TECH CAPACITY : 200T

Capacity: 200 Ton, Cutting Diameter: 28-50 mm, Stroke Per Minute: 25 SPM, Length of Stroke: 100 mm, Cutting Length: 45 -300 mm, Motor: 400V 50HZ 15W x 4P, Speed: 1.1 - 60 m/min, Maximum Loading Capacity: 10 Ton

TECH CAPACITY : 450T

Ton: 450t, Stroke: 45 SPM, length 105mm, Motor drive dynamic:37(6P), Supply oil : 0.1(4P), feed rate: 40m/min, reduction gear motor:2.2(4P), necessary amount of air: 50 NL/time,Machine height, width,lenght(m)2.9x2.3x3.0, Feeder:1.35x3.375x7.5m, cutting machine(Weight):31500kg,feeder:(kg)3500, dia: 40mm-70mm.

TECH CAPACITY : 200T

Ton:200t, Stroke:50SPM, length: 75mm, shut height:442mm, bed size:460x700mm, ram size:300x410mm, oil pump motor:5~6Kg/cm2, Feeder Model: LAF200,feeding speed: 25m/min, feeder motor:2.2KW,feeder reducer:1/20, feeder length:7500mm, table size:1200x2130x5000mm, air pressure:5~6kg/cm2

TECH CAPACITY : 630T

Capacity : 630t, Stroke length : 140mm, Number of stroke : 20~40 spm, Die height : 470mm, Slide adjustment : 15mm, Bolster dimension (left to right x front to back) : 560 x 700mm, Slide dimension (left to right x front to back) : 430 x 600mm, Electric motor for slide adjustment : 1.5kw x 4P.

TECH CAPACITY : 52KVA

REFERANCE NO : 26, METAL CRACK TESTING

TECH CAPACITY : Φ:28~130MM

REFERANCE NO : 25, Cutting range : dia 28~92mm, dia 28~130mm, Material length : 5~6,7m, Cutting length : 10~50mm, Hydraulic pump : 1.5kw-4p, Tank capacity : 10L, Chip remover : Brush type, Magazine loading width : 800mm, Material loading height : 1020mm, Maximum loading weight : 3800kg, Loading : Hydraulic Cylinder drive.

TECH CAPACITY : M26

Hydraulic pressure :26000kgf, Cutting wire dia : 26mm, Cutting length : 13mm~100mm, Cut off zen : 18,500kgf, Tile size * Length : 80mm*80mm*54mm,punch case dia*length : 80*233mm, die diameter * length distance : 120.65*200mm, between dies : 138mm, Die punch holder : 60mm, Die block : 200, punch holder thickness : 160mm, PKO Length : 35mm, KO Volume : 100mm, Crank stroke (ram stroke) : 230mm, Crank pin dia : 350mm, SPM : 85-72-60,motor power : 37kw 6p, Transferable length : 100mm, Blank turn possible length : 40mm, Adaptive line : 20mm*26mm, Coil inner diameter : 850mm, Coil outer diameter : 1,500mm, Feed Speed : 12/6 points (60), Motor power : 2.2K.

TECH CAPACITY : M8

1D2B, Maximum wire cutting dia : 8X90mm, SPM : 100, Dice Size : 44*90 mm, Punch Size : 40*85 mm, Quill Size : 18*55 mm, Cuter : Open, Motor : 3.7 KW

TECH CAPACITY : M8

1D1B, Maximum Cutting diameter : 8 mm, Max Cut-off Length : 110mm, Max knockout Length : 100 mm, Main Dice Hole (Dia * Depth) : 64 x 140mm, Shear Dice Hole (Dia * Depth) :28 x 120 mm, Pusher Dice Hole (Dia * Depth) : 20 x 120 mm, No. 1 Hole Dice Hole (Dia * Depth) : 30 x 70 mm, No. 2 Hole Dice Hole (Dia * Depth) : 35 x 60 mm, Punch Center Distance: 40 mm, Crank Stroke: 185 mm, Feed Roller Dia: 190 mm, Distance before dead point: 25 mm, Production capacity: 80-160 pcs/min, Forming capacity: 40T, Main Motor: 7.5kW (6P), Machine weight: 5,600 kg, Special Accessories: PKO Length: 16 mm, Variable Speed Motor: 11 (VS) kW, Speed Variation Range: 80 - 160 pcs/min,

TECH CAPACITY : M5

1D2B, Wire diameter : 4.8 mm, Cut-off Length : 35 mm, Kick-out Length : 25 mm, Die Diameter : 35 mm, 1st Punch Diameter : 20 mm, 2nd Punch Diameter : 26 mm, Punch Shift Stroke : 36 mm, Quill Diameter : 18, P.K.O. Stroke : 4(12), Motor (kW/Pole) : 5.5 Kw/4 Pole, Output rate (ppm) : 300 ~ 350, Net Weight (kg) : 3000 kg

TECH CAPACITY : M17

Forming Station: 4 station, Forming capacity: 87 T, Knife Type: Open, Max. cut-off diameter: 17 mm, Max. cut-off length: 1/2 d *10 mm, Quill size: dia 60 x 75 mm, Punch size: dia 55 x 125 mm, Dice size: dia 73.02 x 140 mm, KO Length: H16 mm, Production capacity: 200 SPM, Main motor: 18.5 kW, Power Supply: 25 KVA, Machine weight: 16,500 kgs, Table type: Horizontal

TECH CAPACITY : M24

Forming Station : 5 station, Capacity(T) : 200, Station : 5,Type of Knife : Open, Cutting Diameter(mm) : 23, Cutting Length(mm) : 12-50, Quill Size (Diameter): 75*100, Punch Size (Diameter) : 60*185, Dice Size (Diameter): 100*140, PKO Length(mm) : 23, KO Length (mm) : 40, Speed(SPM) : 80, Main Motor(kw) : 37, Power Supply(KVA) : 45, Machine mass(kg) : 32,000

TECH CAPACITY : M28

Forming Station : 5 Station, Capacity(T) : 260, Station : 5, Type of Knife : Open, Cutting Diameter(mm) : 27-28, Cutting Length(mm) 12-25, Quill Size (Diameter) : 75*100, Punch Size (Diameter) : 80*233, Dice Size (Diameter) : 120.65*200, KO Length(mm) : 40, Speed(SPM) : 80, Main Motor(kw) : 45, Power Supply(KVA) : 50, Machine Mass(kg) : 45,000

TECH CAPACITY : M20

1D2B, BOLT DOUBLE HEADER MACHINE: Capacity: 1D2B, Maximum diameter                   : 20mm, Max Stroke length                       : 200mm, Maximum production                : 35 pieces/minute, motor Power                                : 30kw, Machine Dimension:                                   Length         : 6200mm,                                    Width          : 2800mm,                                   Height          : 2000mm,                                  Net Weight  : 25Ton with complete accessories( Coil feeder, Conveyor belt). Trimming Machine (Trimming):                    Make                         : Yoshihara Trimming Machine,                    model number       :  YT-8,               Capacity:                Maximum diameter : 24mm,                Maximum length      : 200mm,            Maximum production : 37 pieces/minute, Trimming  Machine Dimension:                            Length               : 3200 mm,                           Width                  : 2300 mm,                           Height                 : 3100 mm,                           Motor Power     : 15KW,                           Net Weight        : 8 Ton. The Machine has its Complete Accessories.

TECH CAPACITY : 100T

Capacity : 100t, Stroke length : 320mm, Number of strokes : 25-40 spm, Die height : 360mm, Slide adjustment : 100mm, Slide dimensions (left to right x front to back) : 500 X 410mm, Bolster dimensions (left to right x front to back) : 1070 X 600mm, Main motor : 15kW.

TECH CAPACITY : WIDTH:2.88TX300MM

Leveler Specification - Width : 300 mm, Thickness : 0.5 ~ 2.88 mm, Work roller : dia 54~ 330 mm, Feed Rate : (07-20) m/min, Motor Power : 3.7 Kw. Uncoiler specification - Width : 300 mm, Coil Diameter Outer : 1200 mm Dia, Inner : 508 mm Dia,Max Weight : 1000 Kg,Arm open close range : (450-520)mm dia.

TECH CAPACITY : 35T

Pressure ability : 35 ton,Number of strokes : 100 mm,Stroke length : 80mm,Die height : 210mm,Slide adjustment amount : 55mm,Slide dimension (left to right x front to back) : 350 x 300mm, Bolster dimension (left to right x front to back x thickness) : 700 x 400 x 86mm, Emergency stop time : 105 ms.

TECH CAPACITY : 40T

Capacity 40 tons press: Die set, Length - 280, Width - 250, Height - 175, Die set Inner size - L1 - 180, W1 - 155, H1 - 100, Weight - 66.32 kgs

TECH CAPACITY : 40T

Capacity 40 tons press: Die set, Length - 280, Width - 250, Height - 175, Die set Inner size - L1 - 180, W1 - 155, H1 - 102, Weight - 67.93 kgs

TECH CAPACITY : 30T

Capacity 30 tons press: Die set, Length - 250, Width - 230, Height - 170, Die set Inner size - L1 - 155, W1 - 135, H1 - 95, Weight - 45.66 kgs

TECH CAPACITY : 900W

size of cabinet(mm) : 1500W*1500D*1850H size of Basket (inner diamen]s) : 250W*400D*300H Size of Immersion Tank : 340W*570D*470H Size of Vapor Tank : 630w*570D*450H Max load for washing tank elevator (Kg) : 10 Elevator Lifiting Distance (mm) : 1220 Hight of stand (mm) : 1440

TECH CAPACITY : Width:3.2tX300mm

plate thickness:0.3to3.2,plate width:50to300, feed direction:left-right feed,coil weight:2000kg.

TECH CAPACITY : 40T

Capacity : 40 Ton, Stroke : 60 mm, SPM : 70~200, Die Length : 240 mm, Slide Adjust : 55 mm, Ram Size : 320* 255 mm, Shank Hole : dia 50 mm, Bed opening : 340 * 265 mm, Motor : 4P*2.2 KW, Operation Type : Pneumatic

TECH CAPACITY : 100T

Capacity: 100T , Normal Pressure :200Kg/cm2, Support ( Sub) Cylinder Capacity : 45T, Support Ram Dia : 70 X 4 mm, Support Cyclinder Stroke: 250mm, Main Ram Diameter : 220mm, Stroke :500mm ,Table Size :700 X 700mm, Day light : 850mm.