TECH CAPACITY : Φ420*650

FOLDER : M14, Number of control axes :4, Swinging on bed : dia650mm, Swinging back and front : dia 420mm, Cross feeding movement : dia 330mm, Center opening distance : 650mm, Maximum processing dia x length : dia 420 x 650mm, Tool outer dia : 25mm, Tool inner dia : 40mm, Rated voltage : 200V, Number of phase : 3P, Frequency : 50Hz, Rated capacity : 32.7kVA, Main motor rated current : 96A.

TECH CAPACITY : 450rpm

FOLDER : M13, ST Measurement rotation speed : 450rpm, Machine spindle electric motor : 7.5kw 4P 200V 50 Hz 3Phase,Feed ball outer dia : 40mm, Feed ball screw pitch : 10mm, Rapid traverse speed : 6000mm/min, Rapid traverse- servo motor rotation speed : 600rpm, Spindle rotation speed : 1297, 1st cutting feed rate : 137.1 mm/min, Servo motor rotation speed : 13.71 rpm, 1nd cutting feed rate : 411.3mm/min, Servo motor rotation speed : 41.13rpm, Loader lateral feed speed : 60m/min, Pinion pitch dia :72mm, reduction ratio : 11.24, Servo motor rotation speed : 2983 rpm, Net mass : 13,000kg.

TECH CAPACITY : Φ:210x14 stations

TECH CAPACITY : DIA 210x8stations, Distance b/w both principal axes : 340mm, Maximum swing : 295mm, Chuck size standard : 165mm/205mm, Loader : 120mm, without loader : 230mm, Turret number of station : 8/12 options, Stroke X Axis : 130mm, Stroke Z Axis : 145mm, Rapid travel speed (x axis & Z axis) : 24m/min, Spindle rotation speed (standard) : 45~4500rpm, Spindle rotation speed (option) : 30~3000rpm, Spindle rotation speed (option) : 60~6000rpm, Boring bar maximum dia : 40mm, Total weight(with loader and tools) : approximately 4400kg, Required floor space : width 1900mm x depth 1955mm, Stroke (X,Y,Z axis) : 1600 x 550 x 205mm, Maximum speed (X,Y,Z) : 160 x 120 x 35m/min, Chuck outer dia : 90mm, Jaw stroke : 30mm, Line volts : 200V, Cycles : 50HZ, 3 Phase, Interrupting capacity : 18KA, Power capacity : 32KVA.

TECH CAPACITY : Φ:200x10stations

TECH CAPACITY : DIA 210x8 stations, Maximum swing : 295mm, Chuck size : 165mmx210mm, Tooling : turret, Number of tools : STD-8 OP-12, Spindle nose : JISA2-5, Spindle AC Motor : STD-7.5KW/30min OP-11KW/30min, Gross weight with loader : 2500kg, Rated voltage : 210V, Frequency : 60Hz, 3Phase : Full load : 50A, Stroke X Axis : 130mm, Stroke Z Axis : 145mm, Rapid travel speed (x axis & Z axis) : 24m/min, Spindle rotation speed (standard) : 45~4500rpm, Spindle rotation speed (option) : 30~3000rpm, Spindle rotation speed (option) : 60~6000rpm, Standard tools : 20mm, Boring bar maximum diameter : 40mm, Total weight(with loader) : approximately 2500kg, Total weight(without loader) : approximately 2200kg, Required floor space : width 980mm x depth 1650mm, Stroke (X,Y,Z axis) : 1880 x 485 x 155mm, Maximum speed (X,Y,Z) : 120 x 110 x 35m/min, Chuck outer dia : 90mm, Jaw stroke : 30mm, Maximum material weight : 3kg x 2.

TECH CAPACITY : Φ:210x14 stations

TECH CAPACITY : DIA 210x8stations, Distance b/w both principal axes : 340mm, Maximum swing : 295mm, Chuck size standard : 165mm/205mm, Loader : 120mm, without loader : 230mm, Turret number of station : 8/12 options, Stroke X Axis : 130mm, Stroke Z Axis : 145mm, Rapid travel speed (x axis & Z axis) : 24m/min, Spindle rotation speed (standard) : 45~4500rpm, Spindle rotation speed (option) : 30~3000rpm, Spindle rotation speed (option) : 60~6000rpm, Boring bar maximum dia : 40mm, Total weight(with loader and tools) : approximately 4400kg, Required floor space : width 1900mm x depth 1955mm, Stroke (X,Y,Z axis) : 1600 x 550 x 205mm, Maximum speed (X,Y,Z) : 160 x 120 x 35m/min, Chuck outer dia : 90mm, Jaw stroke : 30mm, Line volts : 200V, Cycles : 50HZ, 3 Phase, Interrupting capacity : 18KA, Power capacity : 32KVA.

TECH CAPACITY : Φ:210x14 stations

FOLDER : M22, TECH CAPACITY : DIA 210x8stations, Distance b/w both principal axes : 340mm, Maximum swing : 295mm, Chuck size standard : 165mm/205mm, Loader : 120mm, without loader : 230mm, Turret number of station : 8/12 options, Stroke X Axis : 130mm, Stroke Z Axis : 145mm, Rapid travel speed (x axis & Z axis) : 24m/min, Spindle rotation speed (standard) : 45~4500rpm, Spindle rotation speed (option) : 30~3000rpm, Spindle rotation speed (option) : 60~6000rpm, Boring bar maximum dia : 40mm, Total weight(with loader and tools) : approximately 4400kg, Required floor space : width 1900mm x depth 1955mm, Stroke (X,Y,Z axis) : 1600 x 550 x 205mm, Maximum speed (X,Y,Z) : 160 x 120 x 35m/min, Chuck outer dia : 90mm, Jaw stroke : 30mm, Line volts : 200V, Cycles : 50HZ, 3 Phase, Interrupting capacity : 18KA, Power capacity : 32KVA.

TECH CAPACITY : Φ:210x14 stations

FOLDER : M21, TECH CAPACITY : DIA 210x8stations, Distance b/w both principal axes : 340mm, Maximum swing : 295mm, Chuck size standard : 165mm/205mm, Loader : 120mm, without loader : 230mm, Turret number of station : 8/12 options, Stroke X Axis : 130mm, Stroke Z Axis : 145mm, Rapid travel speed (x axis & Z axis) : 24m/min, Spindle rotation speed (standard) : 45~4500rpm, Spindle rotation speed (option) : 30~3000rpm, Spindle rotation speed (option) : 60~6000rpm, Boring bar maximum dia : 40mm, Total weight(with loader and tools) : approximately 4400kg, Required floor space : width 1900mm x depth 1955mm, Stroke (X,Y,Z axis) : 1600 x 550 x 205mm, Maximum speed (X,Y,Z) : 160 x 120 x 35m/min, Chuck outer dia : 90mm, Jaw stroke : 30mm, Line volts : 200V, Cycles : 50HZ, 3 Phase, Interrupting capacity : 18KA, Power capacity : 32KVA.

FOLDER : 29, FULL LOAD CURRENT : 3.5A/8A.

FOLDER : 28, Discharge voltage : 500 V or 300 V, selectable, Discharge frequency : One of three frequencies automatically set for the discharge conditions. 500 Hz max, Voltage accuracy : Main voltage ± 1%, However, input voltage coefficient of variation within ± 10%, Discharge conditions : 6 types, Counter electrode cleaning : Automatic regeneration by reversing electrode polarity after each analysis, Spark stand : Stand for argon atmosphere, Wavelength range : 121 to 481 nm and 589 nm, Diffraction grating : Concave radius of curvature: 600 mm Number of grooves: 2400/mm Reciprocal dispersion: 0.69 nm/mm.

FOLDER : 27, Captures a 3D shape in as little as 4 seconds with a resolution of 0.1 μm. * Reference scale 0.1 μm. Acquires measurement data at 800,000 points in as little as four seconds with a working distance of 75 mm.

FOLDER : 26, Captures a 3D shape in as little as 4 seconds with a resolution of 0.1 μm. * Reference scale 0.1 μm. Acquires measurement data at 800,000 points in as little as four seconds with a working distance of 75 mm.

TECH CAPACITY : Automatic dimensions : 110 x 110mm

FOLDER : 25, Automatic dimensions : 110 x 110mm, Maximum movement : 50 x 50mm, Minimum movement : 1μmm, Moving speed : 1-25mm/sec adjustable.

TECH CAPACITY : Automatic dimensions : 110 x 110mm

FOLDER : 24, Automatic dimensions : 110 x 110mm, Maximum movement : 50 x 50mm, Minimum movement : 1μmm, Moving speed : 1-25mm/sec adjustable.

FOLDER : 23

FOLDER : 22, FULL LOAD CURRENT : 4.0A/9.8A.

FOLDER : 21, Lapping Plate Size : 850 x 45 thk, Power : 1 HP, Voltage : 230 V, Frequency : 50 Hz, Phase : Single Phase, Disc Diameter : 10inch, Display Type : LCD.

FOLDER : 20, Latest generation electro-hydraulic press for metallographic embedding. With pre-programmed Struers heating chambers/mold and method/application guide for all embedding diameters – Memory for user-defined embedding method database with capacity for 15 programs, working range 80 – 180 °C, 5 °C steps – Heating ramp between 1 to 15 minutes / 0.5 minute steps, pressure range 50 to 350 bar – Option to attach an automatic thermoplastic resin dispenser.

FOLDER : 18, 8 x 60 Inch Wet Sander.

FOLDER : 17, Rotated voltage : 200V, No-load rotation speed : 2350rpm, Grinding wheel diameter : 255mm, Grinding wheel thickness : 1.2mm, Hole diameter : 31.75mm, Power frequency : 50Hz, Motor output : 2.2KW.

FOLDER : 16, Rotated voltage : 200V, No-load rotation speed : 2350rpm, Grinding wheel diameter : 255mm, Grinding wheel thickness : 1.2mm, Hole diameter : 31.75mm, Power frequency : 50Hz, Motor output : 2.2KW.

FOLDER : 15, Rotated voltage : 200V, No-load rotation speed : 1560rpm, Grinding wheel diameter : 455mm, Grinding wheel thickness : 3.5mm, Power frequency : 50Hz, Motor output : 7.5KW.

FOLDER : 14, Angle : plus or minus 100deg, Capacity : plus or minus 3KN.m, Mass : 460kg.

FOLDER : 13, Rotational speed : plus or minus 0.5~50rpm, Rotational speed measurement accuracy : plus or minus 0.3%F.S, Torque control accuracy : plus or minus 0.5% F.S, Speed detector : motor encoder.

FOLDER : 12, Moving speed : 10-2mm/sec(variable with jog dial), Fixed method : Hydraulic clamp (8.25KN x 4Pieces), Motor capacity : 30KW, Mass : 215kg.

FOLDER : 11, Input power : 191 NM, Output power : 2000 NM, Normal stroke : 100mm.