TECH CAPACITY : 1200T

Capacity : 1200t, Stroke Length: 250 mm, Idle Continuous Stroke Rate: 15-40 spm, Intermittent Stroke Rate: 25 spm at 12 spm, Micro-Inching: Approx. 10 spm, Die Height: 750 mm, Slide Adjustment: 100 mm, Slide Dimensions (LxW): 2450 x 1000 mm, Bolster Dimensions (LxW): 2450 x 1200 mm, Bolster Thickness: 250 mm, Bolster Surface Height from Floor: 800 mm, Maximum Die Hanging Weight: 4.0 tons, Side Opening Dimensions (WxH): 1050 x 510 mm, Main Motor: INY 160 kw.

TECH CAPACITY : 1000T

Capacity : 1000t, Press Size: 3M width x 9M height, Die Height: 800 mm, Slide Dimension (Left to Right): 1000 mm, Slide Dimension (Front to Back): 1200 mm, Bolster Dimension (Left to Right): 1000 mm, Bolster Dimension (Front to Back): 1200 mm, Thickness: 200 mm, Slide Adjustment Length: 30 mm, Stroke Length: 500 mm, Number of Strokes: 15-20 spm (strokes per minute), Maximum Workload: 28 TON-M at 15 SPM, Main motor: 160Kw/DC, Press Weight: Approximately 160 tons.

NEGOTIATED

TECH CAPACITY : 600T

Capacity: 600 T, Stroke: 148 mm, SPM: 40, Die Height: 540 mm, Bolster size: 630 mm * 900 mm * 120 mm, Slide size: 540 mm * 600 mm, Slide Adjustment: 50 mm, Motar : 37 Kw.

TECH CAPACITY : 1200T

Capacity: 12000 kN, Shut Height: 1200mm (stroke down, adjust up), Stroke Length: 300mm, Stroke Rate: 30 spm.

TECH CAPACITY : 1600T

Capacity : 1600ton, Die Height : 820mm, Stroke length: 280 mm, number of Stroke per minute : 60 - 80spm, Slide dimensions (left to right x front to back) : 920mm x 1000mm, Bolster dimensions (left to right x front to back) : 1050mm x 1200mm, Slide adjustment : 17mm, Main motor : 75 Kw.

TECH CAPACITY : 50t

N/A

TECH CAPACITY : 800t

Press Capacity : 800 Ton, Size : 4.5M width x 8M height, Die Height : 1100 mm, Slide Dimension ( Left to Right ) : 1200 mm, Slide Dimension ( Front to Back ) : 1000 mm, Bolster Dimension ( left to Right ) : 1200 mm, Bolster Dimension ( Front to Back ) : 1050 mm, Slide Adjustment Length : 100 mm, Stroke Rate : 15-20 spm, Stroke Length : 400 mm, Maximum Workload : 12 Ton-M at 15 spm, Main Motor : 185 Kw/Dc, Press Weight : Approximately 100 Tons.

NEGOTIATED

TECH CAPACITY : 1000T

Capacity : 1000t, Press Size: 3M width x 9M height, Die Height: 800 mm, Slide Dimensions:Left to Right: 1000 mm, Front to Back: 1200 mm, Bolster Dimensions:Left to Right: 1000 mm, Front to Back: 1200 mm, Slide Adjustment Length: 30 mm, Stroke Length: 500 mm, Stroke Rate: 15 to 20 strokes per minute (SPM), Maximum Workload: 28 TON-M at 15 spm Main Motor: 160Kw/DC, Press Weight: 180t.

TECH CAPACITY : 1600T

Capacity : 1600t, Press Size: 4M width x 9M height, Die Height: 800 mm, Slide Dimension (Left to Right): 1550 mm, Slide Dimension (Front to Back): 1200 mm, Bolster Dimension (Left to Right): 1550 mm, Bolster Dimension (Front to Back): 1200 mm, Thickness: 200 mm, Slide Adjustment Length: 30 mm, Stroke Rate: 15-20 strokes per minute (SPM), Stroke Length: 430 to 600 mm, Maximum Workload: 45 TON-M at 15 SPM, Press Weight: Approximately 270 tons.

TECH CAPACITY : 1200T

Capacity : 1200t, Die Height: 800 mm, Slide Dimension (Left to Right): 1000 mm, Slide Dimension (Front to Back): 1200 mm, Bolster Dimension (Left to Right): 1000 mm, Bolster Dimension (Front to Back): 1200 mm, Thickness: 200 mm, Slide Adjustment Length: 30 mm, Stroke Length: 500 mm, Number of Strokes: 15-20 spm (strokes per minute), Maximum Workload: 30 TON-M at 15 SPM, Main Motor: 170Kw/DC, Press Weight: Approximately : 190t.

TECH CAPACITY : 630T

Capacity : 630t, Press Size: 2.5M x height 6.5M, Die Height: 800 mm, Bolster Dimension (LR): 800 mm, Bolster Dimension (FB): 1050 mm, Slide Dimension (FB): 1050 mm, Slide Dimension (LR): 800 mm, Stroke Length: 400 mm, Slide Adjustment Length: 50 mm, Number of Strokes: 15 to 25 per minute, Maximum Workload: 13 TON-M at 15 spm, Main Motor: 90 Kw/DC, Press Weight: Approximately 80 tons (reference value).

NEGOTIATED

TECH CAPACITY : 800t

Capacity : 800t, Stroke length : 400mm, Number of stroke : 15~30 spm, Bolster dimension (left and right x front and back) : 1040 x 1280mm, Slide dimension (left and right x front and back) : 1040 x 1280mm, Die height : 1200mm, Slide adjustment : 50mm, Main motor : 185kW, Maximum stop time : 285ms, Supply air pressure : 0.5MPa.

TECH CAPACITY : 1000T

Capacity : 1000t, Stroke length : 500mm, Number of stroke : 15~20 spm, Bolster dimension (left and right x front and back) : 1000 x 1200mm, Slide dimension (left and right x front and back) : 1000 x 1200mm, Die height : 800mm, Slide adjustment : 30mm.

TECH CAPACITY : 630T

Capacity : 630t, Stroke length : 400mm, Number of stroke : 15~25 spm, Bolster dimension (left and right x front and back) : 800 x 1050mm, Slide dimension (left and right x front and back) : 800 x 1050mm, Die height : 800mm, Slide adjustment : 50mm, Main motor : 90kW, Maximum stop time : 243ms.

TECH CAPACITY : 400T

Capacity : 400t, Stroke length : 220mm.

TECH CAPACITY : 1200T

Capacity : 110t, Stroke length : 200mm, Number of stroke : 70spm, Die height : 390mm, Slide adjustment : 100mm, Slide dimension(left and right x front and back) : 600 x 500mm, Bolster dimension(left and right x front and back) : 1100 x 700mm, Bolster thickness : 150mm, Servo motor : 30kw.

TECH CAPACITY : 630T

Capacity : 630t, Stroke length : 220mm, Number of stroke : 25~40spm, Die height : 500mm, Slide adjustment : 15mm, Slide dimension(left and right x front and back) : 700 x 600mm, Bolster dimension(left and right x front and back) : 800 x 700mm, Main motor : 45kw, Supply air pressure : 5kgf/cm square, Maximum stop time : 220ms.

TECH CAPACITY : 4000T

Capacity : 4000t, Number of strokes : 45spm, Stroke length : 406mm, Main shaft dia at Journals : 686mm, Main shaft dia at Eccentric : 1048mm, Width of Eccentric Bearing : 812mm, Shut height with top knockout plate : 984mm, Shut height without top knockout plate : 1092mm, Die seat (left to right x front to back) : 1568 x 1625mm, Ram face (left to right x front to back) : 1422 x 1346mm, Approximate net weight : 460,000Lbs.

TECH CAPACITY : 1600T

Capacity : 1600t, Press Size: 5M width x 9,5M height, Die Height: 100mm(1150mm), Slide Dimension (Left to Right): 2200 mm, Slide Dimension (Front to Back): 1360 mm, Bolster Dimension (Left to Right): 2550 mm, Bolster Dimension (Front to Back): 1120 mm, Thickness: 250 mm, Slide Adjustment Length: 100 mm, Stroke Length: 800 mm, Stroke Rate: 17-35 (5-6), strokes per minute (SPM), Slide Knockout – Air Normal Pressure Type, Press Weight: Approximately 350 tons, Main Motor: 315 Kw/AC.

NEGOTIATED

TECH CAPACITY : 2500T

Capacity : 2500t, Stroke : 360mm, Shut height : 1000mm, Number of stroke : 70spm, Slide Adj : 7 mm, Ram size (left to right x front to back) : 1400 x 1400 mm, Bed size (left to right x front to back) : 1500 x 1400 mm.

TECH CAPACITY : 1600T

3 STAGE DIE SET -- Length : 1260mm, With : 1200mm, Height : 785mm.

TECH CAPACITY : 2.2T

Dropping Section weight : 2250 Kg, Normal Die Weight : 450 Kg (Maximum) Maximum Stroke : 950 mm, Guide Distance : 590 mm, Die Thickness : 350 mm, Ram Bottom Surface size : 570 w * 550 mm, Inlet Pipe Size : 100 (A) (4B), Exhaust Pipe Size : 125(A) (5B), Maximum Stamping Force : 6800 Kg-m, Required Air Compressor Capacity ; 110 Kw, Maximum Air Pressure : 7 Kg/cm2

TECH CAPACITY : 450T

Capacity : 450 Ton, Stroke Length : 50 mm, Number of Stroke : 28 SPM, Diameter : 50-90mm, Main Motor : 45 KW 8P, Excentric Lubricating Motor : 0.75KW 4P, Slide Lubricating Motor : 0.02KW 4P, Feeding Speed : 3~12m/min, Feeding reducer Motor : 3.7KW 4P, Feeding Shaft Adjust Motor : 0.4KW 4P, Stock Feeding Motor : 0.75KW 4p

TECH CAPACITY : 16000T

Capacity: 16000 Ton, Wedge Press KP 160000, RAM Stroke: 600 mm, RAM Adjustment: 30 mm, Idle speed: Max. 25 min-1, Number of single stroke: Max. 5 min-1, Shut Height (ram down, adjustment up): approx. 2,000 mm, Horizontal between stands: 2500mm, Table surface: 2440mm LR x 3000mm FB, Ram face: 2380mm LR x 2800mm FB, Side window: Width x Height 1,700 x 2,300 mm, Motor data: 700kw (951.73 HP), Electrical data - Working voltage: AC 3x 660V, Control voltage: AC220V DC24V, Frequency: 50Hz, Rated current: 1150A, Connection power: 1300 KVA, Overall dimensions: 9740mm x 12100mm, Weight: 1750 tons (98 crates at Dalian port), 220-ton table (Shanghai), 430-ton Traverse Crown (Shanghai), 72 tons left and right rows (each) (Shanghai), Original Packaging Condition (CONDITION: Original Packaging Condition).

TECH CAPACITY : 200T

Capacity: 200 Ton, Cutting Diameter: 28-50 mm, Stroke Per Minute: 25 SPM, Length of Stroke: 100 mm, Cutting Length: 45 -300 mm, Motor: 400V 50HZ 15W x 4P, Speed: 1.1 - 60 m/min, Maximum Loading Capacity: 10 Ton

TECH CAPACITY : 800T

capacity: 800Ton, length of the stroke: 125mm, Stroke number: 20RPM cutting diameter:50-110mm, Brade length: 470mm, length:75-1.350mm, speed:300-600mm/sec, Motor:4P 55KW, Conveyor Motor:4Px5.5KW(8Px2.5KW), Air pressure:5Kg/cm2 weight:36t

TECH CAPACITY : 200T

Capacity: 200 Ton, Cutting Diameter: 28-50 mm, Stroke Per Minute: 25 SPM, Length of Stroke: 100 mm, Cutting Length: 45 -300 mm, Motor: 400V 50HZ 15W x 4P, Speed: 1.1 - 60 m/min, Maximum Loading Capacity: 10 Ton

TECH CAPACITY : 450T

Ton: 450t, Stroke: 45 SPM, length 105mm, Motor drive dynamic:37(6P), Supply oil : 0.1(4P), feed rate: 40m/min, reduction gear motor:2.2(4P), necessary amount of air: 50 NL/time,Machine height, width,lenght(m)2.9x2.3x3.0, Feeder:1.35x3.375x7.5m, cutting machine(Weight):31500kg,feeder:(kg)3500, dia: 40mm-70mm.

TECH CAPACITY : 200T

Ton:200t, Stroke:50SPM, length: 75mm, shut height:442mm, bed size:460x700mm, ram size:300x410mm, oil pump motor:5~6Kg/cm2, Feeder Model: LAF200,feeding speed: 25m/min, feeder motor:2.2KW,feeder reducer:1/20, feeder length:7500mm, table size:1200x2130x5000mm, air pressure:5~6kg/cm2

TECH CAPACITY : 630T

Capacity : 630t, Stroke length : 140mm, Number of stroke : 20~40 spm, Die height : 470mm, Slide adjustment : 15mm, Bolster dimension (left to right x front to back) : 560 x 700mm, Slide dimension (left to right x front to back) : 430 x 600mm, Electric motor for slide adjustment : 1.5kw x 4P.

TECH CAPACITY : 52KVA

REFERANCE NO : 26, METAL CRACK TESTING

TECH CAPACITY : Φ:28~130MM

REFERANCE NO : 25, Cutting range : dia 28~92mm, dia 28~130mm, Material length : 5~6,7m, Cutting length : 10~50mm, Hydraulic pump : 1.5kw-4p, Tank capacity : 10L, Chip remover : Brush type, Magazine loading width : 800mm, Material loading height : 1020mm, Maximum loading weight : 3800kg, Loading : Hydraulic Cylinder drive.

TECH CAPACITY : M26

Hydraulic pressure :26000kgf, Cutting wire dia : 26mm, Cutting length : 13mm~100mm, Cut off zen : 18,500kgf, Tile size * Length : 80mm*80mm*54mm,punch case dia*length : 80*233mm, die diameter * length distance : 120.65*200mm, between dies : 138mm, Die punch holder : 60mm, Die block : 200, punch holder thickness : 160mm, PKO Length : 35mm, KO Volume : 100mm, Crank stroke (ram stroke) : 230mm, Crank pin dia : 350mm, SPM : 85-72-60,motor power : 37kw 6p, Transferable length : 100mm, Blank turn possible length : 40mm, Adaptive line : 20mm*26mm, Coil inner diameter : 850mm, Coil outer diameter : 1,500mm, Feed Speed : 12/6 points (60), Motor power : 2.2K.

TECH CAPACITY : M8

1D2B, Maximum wire cutting dia : 8X90mm, SPM : 100, Dice Size : 44*90 mm, Punch Size : 40*85 mm, Quill Size : 18*55 mm, Cuter : Open, Motor : 3.7 KW

TECH CAPACITY : M8

1D1B, Maximum Cutting diameter : 8 mm, Max Cut-off Length : 110mm, Max knockout Length : 100 mm, Main Dice Hole (Dia * Depth) : 64 x 140mm, Shear Dice Hole (Dia * Depth) :28 x 120 mm, Pusher Dice Hole (Dia * Depth) : 20 x 120 mm, No. 1 Hole Dice Hole (Dia * Depth) : 30 x 70 mm, No. 2 Hole Dice Hole (Dia * Depth) : 35 x 60 mm, Punch Center Distance: 40 mm, Crank Stroke: 185 mm, Feed Roller Dia: 190 mm, Distance before dead point: 25 mm, Production capacity: 80-160 pcs/min, Forming capacity: 40T, Main Motor: 7.5kW (6P), Machine weight: 5,600 kg, Special Accessories: PKO Length: 16 mm, Variable Speed Motor: 11 (VS) kW, Speed Variation Range: 80 - 160 pcs/min,

TECH CAPACITY : M5

1D2B, Wire diameter : 4.8 mm, Cut-off Length : 35 mm, Kick-out Length : 25 mm, Die Diameter : 35 mm, 1st Punch Diameter : 20 mm, 2nd Punch Diameter : 26 mm, Punch Shift Stroke : 36 mm, Quill Diameter : 18, P.K.O. Stroke : 4(12), Motor (kW/Pole) : 5.5 Kw/4 Pole, Output rate (ppm) : 300 ~ 350, Net Weight (kg) : 3000 kg

TECH CAPACITY : M17

Forming Station: 4 station, Forming capacity: 87 T, Knife Type: Open, Max. cut-off diameter: 17 mm, Max. cut-off length: 1/2 d *10 mm, Quill size: dia 60 x 75 mm, Punch size: dia 55 x 125 mm, Dice size: dia 73.02 x 140 mm, KO Length: H16 mm, Production capacity: 200 SPM, Main motor: 18.5 kW, Power Supply: 25 KVA, Machine weight: 16,500 kgs, Table type: Horizontal

TECH CAPACITY : M24

Forming Station : 5 station, Capacity(T) : 200, Station : 5,Type of Knife : Open, Cutting Diameter(mm) : 23, Cutting Length(mm) : 12-50, Quill Size (Diameter): 75*100, Punch Size (Diameter) : 60*185, Dice Size (Diameter): 100*140, PKO Length(mm) : 23, KO Length (mm) : 40, Speed(SPM) : 80, Main Motor(kw) : 37, Power Supply(KVA) : 45, Machine mass(kg) : 32,000

TECH CAPACITY : M28

Forming Station : 5 Station, Capacity(T) : 260, Station : 5, Type of Knife : Open, Cutting Diameter(mm) : 27-28, Cutting Length(mm) 12-25, Quill Size (Diameter) : 75*100, Punch Size (Diameter) : 80*233, Dice Size (Diameter) : 120.65*200, KO Length(mm) : 40, Speed(SPM) : 80, Main Motor(kw) : 45, Power Supply(KVA) : 50, Machine Mass(kg) : 45,000

TECH CAPACITY : M20

1D2B, BOLT DOUBLE HEADER MACHINE: Capacity: 1D2B, Maximum diameter                   : 20mm, Max Stroke length                       : 200mm, Maximum production                : 35 pieces/minute, motor Power                                : 30kw, Machine Dimension:                                   Length         : 6200mm,                                    Width          : 2800mm,                                   Height          : 2000mm,                                  Net Weight  : 25Ton with complete accessories( Coil feeder, Conveyor belt). Trimming Machine (Trimming):                    Make                         : Yoshihara Trimming Machine,                    model number       :  YT-8,               Capacity:                Maximum diameter : 24mm,                Maximum length      : 200mm,            Maximum production : 37 pieces/minute, Trimming  Machine Dimension:                            Length               : 3200 mm,                           Width                  : 2300 mm,                           Height                 : 3100 mm,                           Motor Power     : 15KW,                           Net Weight        : 8 Ton. The Machine has its Complete Accessories.

TECH CAPACITY : 100T

Capacity : 100t, Stroke length : 320mm, Number of strokes : 25-40 spm, Die height : 360mm, Slide adjustment : 100mm, Slide dimensions (left to right x front to back) : 500 X 410mm, Bolster dimensions (left to right x front to back) : 1070 X 600mm, Main motor : 15kW.

TECH CAPACITY : WIDTH:2.88TX300MM

Leveler Specification - Width : 300 mm, Thickness : 0.5 ~ 2.88 mm, Work roller : dia 54~ 330 mm, Feed Rate : (07-20) m/min, Motor Power : 3.7 Kw. Uncoiler specification - Width : 300 mm, Coil Diameter Outer : 1200 mm Dia, Inner : 508 mm Dia,Max Weight : 1000 Kg,Arm open close range : (450-520)mm dia.

TECH CAPACITY : 35T

Pressure ability : 35 ton,Number of strokes : 100 mm,Stroke length : 80mm,Die height : 210mm,Slide adjustment amount : 55mm,Slide dimension (left to right x front to back) : 350 x 300mm, Bolster dimension (left to right x front to back x thickness) : 700 x 400 x 86mm, Emergency stop time : 105 ms.

TECH CAPACITY : 40T

Capacity 40 tons press: Die set, Length - 280, Width - 250, Height - 175, Die set Inner size - L1 - 180, W1 - 155, H1 - 100, Weight - 66.32 kgs

TECH CAPACITY : 40T

Capacity 40 tons press: Die set, Length - 280, Width - 250, Height - 175, Die set Inner size - L1 - 180, W1 - 155, H1 - 102, Weight - 67.93 kgs

TECH CAPACITY : 30T

Capacity 30 tons press: Die set, Length - 250, Width - 230, Height - 170, Die set Inner size - L1 - 155, W1 - 135, H1 - 95, Weight - 45.66 kgs

TECH CAPACITY : 900W

size of cabinet(mm) : 1500W*1500D*1850H size of Basket (inner diamen]s) : 250W*400D*300H Size of Immersion Tank : 340W*570D*470H Size of Vapor Tank : 630w*570D*450H Max load for washing tank elevator (Kg) : 10 Elevator Lifiting Distance (mm) : 1220 Hight of stand (mm) : 1440

TECH CAPACITY : Width:3.2tX300mm

plate thickness:0.3to3.2,plate width:50to300, feed direction:left-right feed,coil weight:2000kg.

TECH CAPACITY : 40T

Capacity : 40 Ton, Stroke : 60 mm, SPM : 70~200, Die Length : 240 mm, Slide Adjust : 55 mm, Ram Size : 320* 255 mm, Shank Hole : dia 50 mm, Bed opening : 340 * 265 mm, Motor : 4P*2.2 KW, Operation Type : Pneumatic

TECH CAPACITY : 100T

Capacity: 100T , Normal Pressure :200Kg/cm2, Support ( Sub) Cylinder Capacity : 45T, Support Ram Dia : 70 X 4 mm, Support Cyclinder Stroke: 250mm, Main Ram Diameter : 220mm, Stroke :500mm ,Table Size :700 X 700mm, Day light : 850mm.

TECH CAPACITY : 300T

Capacity : 300 t, Load Curve : 3.2mm, Stroke length : 75 mm, Number of speed : 60-160 spm, Die height : 600 mm, Slide adjustment : 80 mm, Slide area (L-R x F-B) : 1700 x 900 mm, Bolster size (L-R x F-B) : 1700 x 1000 x 200 mm, Main motor power : 37 KW, Air pressure Clutch brake : 4 bar, Max Stopping Time : 180 milli sec, Floor space size (L-R x W x H) : 3900 x 2500 x 4500 mm, Total press weight : 40 T.

TECH CAPACITY : 20T

Capacity : 20 Ton, Stroke of Slide : 30 mm, Strokes per minute : 150 - 1000 spm, Die height : 210 mm, Adjustment of slide : 30 mm, Slide area : 280*200 mm, Bolster : 500*300*80 mm, Bed opening : 250*120, Motor : 5.5 kW*4P, Stopping Time : 195 ms

TECH CAPACITY : 20T

Capacity : 20 Ton, Stroke of Slide : 30 mm, Strokes per minute : 150 - 1000 spm, Die height : 210 mm, Adjustment of slide : 30 mm, Slide area : 280*200 mm, Bolster : 500*300*80 mm, Bed opening : 250*120, Motor : 5.5 kW*4P, Stopping Time : 195 ms

TECH CAPACITY : 20T

Capacity : 20 Ton, Stroke of Slide : 30 mm, Strokes per minute : 150 - 1000 spm, Die height : 210 mm, Adjustment of slide : 30 mm, Slide area : 280*200 mm, Bolster : 500*300*80 mm, Bed opening : 250*120, Motor : 5.5 kW*4P, Stopping Time : 195 ms

TECH CAPACITY : 30T

Capacity : 30 T, Feeder width : 80mm, Stroke of slide : 30 mm, Stroke per minute : 160-1000 spm, Die Height : 225 mm, Adjustment of Slide : 50 mm, Slide area (left to right x front to back) : 350 x 300 mm, Bolster (left to right x front to back) : 550 x 450 x 90 mm, Opening Bed : 450 x 80 mm, Motor : 4 P/ 11 KW, Stopping Time : 220 MS.

TECH CAPACITY : 30T

Capacity : 30 Ton, SPM : 100-500 spm, Stroke : 30 mm, Die height : 235 mm Adjustment Dimension : 50 mm Feed Line Height Max : 100 mm Feed Line Height Min : 60 mm Feed Length : (2.5-60) mm Max Material Width : 80 mm Bolster Area : 600x450 mm Electric Motor : 3.7 Kw Air Pressure : 5 kg/cm^2

TECH CAPACITY : 30T

Capacity : 30 Ton, SPM : 100-500 spm, Stroke : 30 mm, Die height : 235 mm Adjustment Dimension : 50 mm Feed Line Height Max : 100 mm Feed Line Height Min : 60 mm Feed Length : (2.5-60) mm Max Material Width : 80 mm Bolster Area : 600x450 mm Electric Motor : 3.7 Kw Air Pressure : 5 kg/cm^2

TECH CAPACITY : 30T

Capacity : 30 Ton, SPM : 250 -700 spm, Stroke : 30 mm, Die height : 235 mm Adjustment Dimension : 30 mm Feed Line Height Max : 120 mm Feed Line Height Min : 80 mm Feed Length : (2.5 -60) mm Max Material Width : 80 mm Bolster Area : 550 x 350 mm Electric Motor : 5.5 Kw Air Pressure : 5 kg/cm^2

TECH CAPACITY : 30T

Capacity : 30 Ton, SPM : 250 -700 spm, Stroke : 30 mm, Die height : 235 mm Adjustment Dimension : 30 mm Feed Line Height Max : 120 mm Feed Line Height Min : 80 mm Feed Length : (2.5 -60) mm Max Material Width : 80 mm Bolster Area : 550 x 350 mm Electric Motor : 5.5 Kw Air Pressure : 5 kg/cm^2

TECH CAPACITY : 30T

Capacity : 30 Ton, SPM : 250 -700 spm, Stroke : 30 mm, Die height : 235 mm Adjustment Dimension : 30 mm Feed Line Height Max : 120 mm Feed Line Height Min : 80 mm Feed Length : (2.5 -60) mm Max Material Width : 80 mm Bolster Area : 550 x 350 mm Electric Motor : 5.5 Kw Air Pressure : 5 kg/cm^2

TECH CAPACITY : 20T

Capacity : 20 Ton, SPM : 250 -700 spm, Stroke : 30 mm, Die height : 235 mm Adjustment Dimension : 30 mm Feed Line Height Max : 120 mm Feed Line Height Min : 80 mm Feed Length : (2.5 -60) mm Max Material Width : 80 mm Bolster Area : 450 x 300 mm Electric Motor : 3.7 Kw Air Pressure : 5 kg/cm^2

TECH CAPACITY : 20T

Capacity : 20 Ton, SPM : 250 -700 spm, Stroke : 30 mm, Die height : 235 mm Adjustment Dimension : 30 mm Feed Line Height Max : 120 mm Feed Line Height Min : 80 mm Feed Length : (2.5 -60) mm Max Material Width : 80 mm Bolster Area : 450 x 300 mm Electric Motor : 3.7 Kw Air Pressure : 5 kg/cm^2

TECH CAPACITY : 20T

Capacity : 20 Ton, SPM : 250 -700 spm, Stroke : 30 mm, Die height : 235 mm Adjustment Dimension : 30 mm Feed Line Height Max : 120 mm Feed Line Height Min : 80 mm Feed Length : (2.5 -60) mm Max Material Width : 80 mm Bolster Area : 450 x 300 mm Electric Motor : 3.7 Kw Air Pressure : 5 kg/cm^2

TECH CAPACITY : 20T

Capacity : 20 Ton, SPM : 250 -700 spm, Stroke : 30 mm, Die height : 235 mm Adjustment Dimension : 30 mm Feed Line Height Max : 120 mm Feed Line Height Min : 80 mm Feed Length : (2.5 -60) mm Max Material Width : 80 mm Bolster Area : 450 x 300 mm Electric Motor : 3.7 Kw Air Pressure : 5 kg/cm^2

TECH CAPACITY : 20T

Capacity : 20 Ton, SPM : 250 -700 spm, Stroke : 30 mm, Die height : 235 mm Adjustment Dimension : 30 mm Feed Line Height Max : 120 mm Feed Line Height Min : 80 mm Feed Length : (2.5 -60) mm Max Material Width : 80 mm Bolster Area : 450 x 300 mm Electric Motor : 3.7 Kw Air Pressure : 5 kg/cm^2

TECH CAPACITY : 15Tx650

Capacity:15 Ton, Stroke Length:100 mm, SPM:35, Max DescentSpeed:35 mm/sec, Inertai Falling Value:0.5 mm, Sudden Stop time:10 ms, Max Down time:20 ms, Table Length:350*620 mm, Gap Depth:350 mm, Power:1.5 KW.

TECH CAPACITY : 30T

CAPACITY:30T, 58st 2A I04 PC MOLD

TECH CAPACITY : 25tx2450

FLYING SHEAR LINE 25t * 2450mm * 35Ton

TECH CAPACITY : T:400x500mm

SPEED : 25m - 100 m BLADE LENGTH : 2520 mm BLADE MOTOR : 750W 4P WEIGHT : 180 Kg LENGTH : 295 mm Table : 400 * 500 mm WELDING MACHINE : 200 V 2KVA MACHINE SIZE : 1370 * 850 * 530 mm CUTTING ABILITY : 200 mm

TECH CAPACITY : Φ:450MM

Blade Length:4,670 mm, Blade width:38 mm, Blade Thickness:1.4 mm, Blade Motor:5 Hp, Hydraulic Motor:0.5 Hp, Coolant Pump:M-30 inch, Wire Brush:M- 27 inch

TECH CAPACITY : ?:200

Wheel Size:600 mm, Cutting Capacity:200 dia, Wheel Speed:1460 rpm, Motor Power:11 kw, Operating voltage:400 V, CropCut Length:220 mm,

TECH CAPACITY : TUBE φ:15~25

N/A

TECH CAPACITY : doubt

NIL

TECH CAPACITY : 480TON

Capacity : 427 Palette, Maximum Load : 1000Kg, Power Supply : 200V 50 Hz, Maximum Packaging Dimensions: 1200W*870L*970H; Rack Master Model : R-L10 2 Units, Rack Master Travelling Speed: 100(100) - 3m/min, Rack Master Lifting Speed: 10(20) -3m/min, Rack Master Forking Speed: 20(31.5) -5m/min, Rated Voltage: AC200V/3 phase/50Hz, Total Capacity : 0.9KVA, Rated Current : 3.8A, Main Breaker Capacity: 10A, Weight : 30 KG.

TECH CAPACITY : WHEEL DIA : 550MM

FOLDER : M59, Grinding wheel diameter : 550mm, Grinding wheel thickness : 18.6mm, Grinding wheel hole diameter : 50mm, Grinding wheel rotation direction : CCW.CW rotate, Rated voltage : 200V, No-load rotation speed : 4166mm.

TECH CAPACITY : 34KVA

FOLDER : M60, 34KVA,5.5T.

TECH CAPACITY : 34KVA

FOLDER : M59, 34KVA,5.5T.

TECH CAPACITY : WHEEL DIA : 550MM

FOLDER : M58, Grinding wheel diameter : 550mm, Grinding wheel thickness : 18.6mm, Grinding wheel hole diameter : 50mm, Grinding wheel rotation direction : CCW.CW rotate, Rated voltage : 200V, No-load rotation speed : 4166mm.

TECH CAPACITY : W:2380kg

FOLDER : M38, 220V/8A/50HZ/1PH, Weight : 2380kg.

TECH CAPACITY : 8KVA

FOLDER : M37 & M40 (WASHING MACHINE).

TECH CAPACITY : Φ:254X 10 STATIONS

Line volts:200v,Cycles:50HZ,Phase:3P,F.L. AMPS:93A,Interrupting capacity:13KA,Power capacity:32KVA.

TECH CAPACITY : Φ:254X 10 STATIONS

Line volts:200v,Cycles:50HZ,Phase:3P,F.L. AMPS:93A,Interrupting capacity:13KA,Power capacity:32KVA.

TECH CAPACITY : Φ:254X 10 STATIONS

Line volts:200v,Cycles:50HZ,Phase:3P,F.L. AMPS:93A,Interrupting capacity:13KA,Power capacity:32KVA.

TECH CAPACITY : WHEEL DIA : 1055MM

FOLDER : M57, Grinding wheel dia : 1065mm, Grinding wheel thickness : 90.2351mm, Grinding wheel hole dia : 302mm, Rated voltage : 200V, No-load rotation speed : 1404-895RPM, Supply : 200V 300A 50HZ, 3 Phase, Largest motor or load : 160A, Interrupting capacity : 85 KA.

TECH CAPACITY : WHEEL DIA : 1065MM

FOLDER : M56, Grinding wheel dia : 1065mm, Grinding wheel hole dia : 3048mm, Grinding wheel thickness : 510mm, Rated voltage : 200V, No-load rotation speed : 896-1172min, Source : 200V 60Hz, 3Phase.

TECH CAPACITY : VOLTAGE : AC200V

FOLDER : M55, Power supply : AC200V 100A 50Hz, 3 Phase, Rating : 37KW.

TECH CAPACITY : VOLTAGE : AC200V

FOLDER : M54, Power supply : AC200V 100A 50Hz, 3 Phase, Rating : 37KW.

TECH CAPACITY : VOLTAGE : AC200V

FOLDER : M53, Power supply : AC200V 100A 50Hz, 3 Phase, Rating : 37KW.

TECH CAPACITY : 23.5KVA

FOLDER : M52, 23.5KVA.

TECH CAPACITY : CAPACITY : 25L

FOLDER : M51, Machining work Crankshaft : 8 types, No of Cutting : 1 piece, Processing station : 1 station, Machine height : 2315mm, Machine weight : 4680kg, Hydraulic tank capacity : 25l, Pump type : VDC-1B-1A3-20, Pressure maximum : 5.0 MPa.

TECH CAPACITY : CAPACITY : 25L

FOLDER : M50, Machining work Crankshaft : 8 types, No of Cutting : 1 piece, Processing station : 1 station, Machine height : 2315mm, Machine weight : 4680kg, Hydraulic tank capacity : 25l, Pump type : VDC-1B-1A3-20, Pressure maximum : 5.0 MPa.

TECH CAPACITY : CAPACITY : 25L

FOLDER : M49, Machining work Crankshaft : 8 types, No of Cutting : 1 piece, Processing station : 1 station, Machine height : 2315mm, Machine weight : 4680kg, Hydraulic tank capacity : 25l, Pump type : VDC-1B-1A3-20, Pressure maximum : 5.0 MPa.

TECH CAPACITY : VOLTAGE : AC200/220V

FOLDER : M47, Supply voltage : AC200/220V, 3Phase, Frequency : 50/60Hz, Rated : 36KVA.

TECH CAPACITY : VOLTAGE : AC200V

FOLDER : M46, Control device : FANUC 35i-B, Consumption of electricity : 66KVA, Voltage : AC200V, Rated current : 190A, Frequency : 50Hz, Capcity : 340L/min, Net Weight : 6.0t.

TECH CAPACITY : VOLTAGE : AC200V

FOLDER : M45, Control device : FANUC 35i-B, Consumption of electricity : 66KVA, Voltage : AC200V, Rated current : 190A, Frequency : 50Hz, Capcity : 340L/min, Net Weight : 6.0t.

TECH CAPACITY : CUTTER DIA : 220MM

FOLDER : M44, Cutter dia : 220mm, Cutter spindle motor : 30kw, X axis Swing head Stroke : plus or minus 140mm, Cutting feed rate : 0-6700mm/min, Y axis Slide stroke : lus or minus 140mm, Cutting feed rate : 0-6700mm, Z axis Slide stroke : 700mm, Work slide fixed : 320mm, Chuck : hydraulic drive, Tank capacity : 13.5l, Motor : 0.07kw.

TECH CAPACITY : Φ420*650

FOLDER : M43, Universal 4 Axis, Voltage : 200V, Frequency : 50Hz, 3Phase, Rated capacity : 45KVA, Control voltage AC200V DC24V, Weight : 10kg.

TECH CAPACITY : Φ420*650

FOLDER : M42, Universal 4 Axis, Voltage : 200V, Frequency : 50Hz, 3Phase, Rated capacity : 45KVA, Control voltage AC200V DC24V, Weight : 10kg.

TECH CAPACITY : Φ420*650

FOLDER : M41, UNIVERSAL 4 AXIS, Volume : 40l, 150kg.

TECH CAPACITY : Φ:200x10stations

Maximum processing length : 220mm, Spindle speed range : 40~4min(RPM), Closing tube through hole diameter : dia52, Chuck type : Hydraulic hollow rotating cylinder, Power chuck format : B (B-208A-28), Turret type : B-side turret required, Turret head width : 280mm, Maximum tool turning dia : dia 470mm, Slide (x-axis,Y-axis) : 150 X 300mm, Cutting feed 15,000mm, Hydraulic tank capacity : 7L, Coolant tank capacity :180L, NC control unit : DC24V, Servo : AC200/220V 50/60Hz.

TECH CAPACITY : Φ:200x10stations

Maximum processing length : 220mm, Spindle speed range : 40~4min(RPM), Closing tube through hole diameter : dia52, Chuck type : Hydraulic hollow rotating cylinder, Power chuck format : B (B-208A-28), Turret type : B-side turret required, Turret head width : 280mm, Maximum tool turning dia : dia 470mm, Slide (x-axis,Y-axis) : 150 X 300mm, Cutting feed 15,000mm, Hydraulic tank capacity : 7L, Coolant tank capacity :180L, NC control unit : DC24V, Servo : AC200/220V 50/60Hz.

TECH CAPACITY : Φ:200x10stations

Maximum processing length : 220mm, Spindle speed range : 40~4min(RPM), Closing tube through hole diameter : dia52, Chuck type : Hydraulic hollow rotating cylinder, Power chuck format : B (B-208A-28), Turret type : B-side turret required, Turret head width : 280mm, Maximum tool turning dia : dia 470mm, Slide (x-axis,Y-axis) : 150 X 300mm, Cutting feed 15,000mm, Hydraulic tank capacity : 7L, Coolant tank capacity :180L, NC control unit : DC24V, Servo : AC200/220V 50/60Hz.

TECH CAPACITY : Φ:210x14 stations

TECH CAPACITY : DIA 210x8stations, Distance b/w both principal axes : 340mm, Maximum swing : 295mm, Chuck size standard : 165mm/205mm, Loader : 120mm, without loader : 230mm, Turret number of station : 8/12 options, Stroke X Axis : 130mm, Stroke Z Axis : 145mm, Rapid travel speed (x axis & Z axis) : 24m/min, Spindle rotation speed (standard) : 45~4500rpm, Spindle rotation speed (option) : 30~3000rpm, Spindle rotation speed (option) : 60~6000rpm, Boring bar maximum dia : 40mm, Total weight(with loader and tools) : approximately 4400kg, Required floor space : width 1900mm x depth 1955mm, Stroke (X,Y,Z axis) : 1600 x 550 x 205mm, Maximum speed (X,Y,Z) : 160 x 120 x 35m/min, Chuck outer dia : 90mm, Jaw stroke : 30mm, Line volts : 200V, Cycles : 50HZ, 3 Phase, Interrupting capacity : 18KA, Power capacity : 32KVA.

FOLDER : M20, 0.5t 6KVA

TECH CAPACITY : WHEEL DIA : 470MM

FOLDER : M36, Rated voltage : 200V, No load rotation speed : 4875min, Grinding wheel dia : 470mm, Grinding wheel thickness : 17.07mm, Grinding wheel hole dia : 20mm, Flow : 100l/min, Power supply : 200V 50Hz. OIL COOLING UNIT - MODEL : AKZJ358-H, Power Source max : 3~200V 50HZ, Compressor : 0.75W, Pump : 75W, Blender Agitator : 50w, Heater : 1KW, Refrigerant : R410A : 0.81kg, Refrigeration oil FVC50K : 0.4L, Max operating pressure : 4.1MPa (max), Weight : 47kg.

TECH CAPACITY : CONTROL CIRCUIT : AC100V

FOLDER : M35, Main circuit : 3AC 200 V50/60HZ, Control circuit AC100V DC24V, Main motor : MAX 131 A.200V, Rated capacity : 45.3 KVA, Weight : 1000kg.

TECH CAPACITY : CUTTER DIA : 185MM

FOLDER : M34, Cutting speed :137m/min/dia185, Spindle rotation speed : 236rpm/50Hz, Supply voltage : 200V, Frequency : 50Hz, Nominal power : 80KVA.

TECH CAPACITY : TOTAL CAPACITY : 12KVA

FOLDER : M32, Rated voltage : AC200V/3 Phase/50Hz, Total capacity : 12KVA, Rated current : 37 A/Main breaker capacity 50A, Weight : 300kg, Supply voltage : AC200V, 50Hz, Weight : 8.0t.

TECH CAPACITY : TOTAL CAPACITY : 25KVA

FOLDER : M31, Rated voltage : AC200V/3 Phase/50Hz, Total capacity : 25KVA,Rated current : 60A/Main breaker capacity : 100A, Rated output : 0.75KW, Weight : 3.5t, Mass : 55 kg.

TECH CAPACITY : 1 STATION

FOLDER : M30, Number of Simulataneous cutting : 1 piece, Processing station : 1 station, arm unit 1 set, Required floor space : 2362x5136mm, Machine height : 2300mm, Machine weight : 5000kg, Tank capacity : 20L.

TECH CAPACITY : 1 STATION

FOLDER : M29, Number of Simulataneous cutting : 1 piece, Processing station : 1 station, arm unit 1 set, Required floor space : 2250x5074mm, Machine height : 2200mm, Machine weight : 5000kg, Tank capacity : 20L.

TECH CAPACITY : POWER : 100-230V

FOLDER : M28, Power : 100-230V~50/60Hz 50VA, Fuse : 2.5A 250V, 30KVA.

TECH CAPACITY : voltage : ac200v/50hz

FOLDER : M27, Power supply : voltage AC200V/50HZ, Operation power : supply/AC100V/DC24V, Total machine weight : Approx 13t.

TECH CAPACITY : SIZE(W X L x H) : 1200x2200x1980

FOLDER : M26, Rust prevention method : work rotation type, Size(W x L x H) : 1200 x 2200 x 1980, Weight : 500kg, Tank capacity : 150l, Rust proof pump : 3 phase 200v, 0.75kw.

TECH CAPACITY : CONTROL VOLTAGE : AC100V

FOLDER : M25, NC device : FANUC 35i- MODEL B, Control voltage : AC100V, Power source : dia 3 AC200V 50Hz, Control panel (HxWxD) : 2100 x 1400 x 500.

TECH CAPACITY : 30mm

FOLDER : M24, E39-40-A external view, change the startup box position, E39-40-B Work inlet, new production of workpiece holder, E39-40-E Measuring unit format and rear, manufactured mounting plate for vertical slide unit, newly manufactured mounting bracket for sensor dock. because the vertical slide unit interferes with the weight of the workpiece, E39-40-G Standard (right) center, Newly manufactured kelepin mounting face plate, Added 2 proximity switches for workpiece indexing, Addition of 2 work piece indexing docks.

TECH CAPACITY : CHUCK:Φ2200X800

FOLDER : M23, Machine hegiht :2200mm, Center line of the processing spindle : 1100mm, Required floor size (frontage x depth) : 4100 x 5000mm, Machine mass : approximately 21,000kg (21 ton), Control panel height : 2200mm, Max work length : 800mm, Swing : 220mm, Work piece dia : 30-70mm, Max workpiece load : 350(35) N(kg).

TECH CAPACITY : CHUCK:Φ3500X800

FOLDER : M22, Machine hegiht :1950mm, Center line of the processing spindle : 1150mm, Required floor size (frontage x depth) : 3600 x 3160mm, Machine mass : approximately 10,000kg (10 ton), Control panel height : 2225mm, Height of the crane for main body : 3265mm, Distance b/w centers : Max 600mm, Swing : 350mm, Max workpiece load : 500(50) N(kg), Full stroke : 425mm.

TECH CAPACITY : CHUCK:Φ3500X800

FOLDER : M21, Machine hegiht :1950mm, Center line of the processing spindle : 1150mm, Required floor size (frontage x depth) : 3600 x 3160mm, Machine mass : approximately 10,000kg (10 ton), Control panel height : 2225mm, Height of the crane for main body : 3265mm, Distance b/w centers : Max 600mm, Swing : 350mm, Max workpiece load : 500(50) N(kg), Full stroke : 425mm.

TECH CAPACITY : CAPACITY : 25L

FOLDER : 20, Machining work Crankshaft : 8 types, No of Cutting : 1 piece, Processing station : 1 station, Machine height : 2315mm, Machine weight : 4680kg, Hydraulic tank capacity : 25l, Pump type : VDC-1B-1A3-20, Pressure maximum : 5.0 MPa.

TECH CAPACITY : CENTER LINE : 250-750MM

FOLDER : M19, A-1 X-axis travel distance (column left/right) : 500mm, A-2 Y-axis travel distance (head up and down) : 500mm, A-3 Z-axis travel distance (saddle front and rear) : 500mm, A-4 Distance from index table mounting : 200~700mm, Surface to spindle centrline (distance from index table top to spindle Center line : 250~750mm, A-5 Distance from table center line to spindle end face : 150~650mm, B-1 Table work surface size : dia 400, B-2 Maximum load capacity of table : 620kg, B-4 Minimum table index angle : 0.001 deg, C-4 Spindle shaft bearing inner diameter : dia 65mm, Tool storage capacity : 24 pieces, Maximum tool length : 350mm, Maximum tool mass : 10kg, G-3 Hydraulic unit motor : 2.2kw, G-4 Lubricating motor : 17W, G-5 Magazine motor : 1.2kw, G-6 ATC arm motor : 1.2kw, Hydraulic unit tanda : 20L, Lubricating oil tank capacity : 2L, Machine height : 2790mm, Required floor space Width x depth : 1420 x 3750mm, Machine mass : 6,600kg.

TECH CAPACITY : Φ420*650

FOLDER : M18, Number of control axes :4, Swinging on bed : dia650mm, Swinging back and front : dia 420mm, Cross feeding movement : dia 330mm, Center opening distance : 650mm, Maximum processing dia x length : dia 420 x 650mm, Tool outer dia : 25mm, Tool inner dia : 40mm, Rated voltage : 200V, Number of phase : 3P, Frequency : 50Hz, Rated capacity : 32.7kVA, Main motor rated current : 96A.

TECH CAPACITY : CUTTER DIA : 220MM

FOLDER : M17, Cutter dia : 220mm, Cutter spindle motor : 30kw, X axis Swing head Stroke : plus or minus 140mm, Cutting feed rate : 0-6700mm/min, Y axis Slide stroke : lus or minus 140mm, Cutting feed rate : 0-6700mm, Z axis Slide stroke : 700mm, Work slide fixed : 320mm, Chuck : hydraulic drive, Tank capacity : 13.5l, Motor : 0.07kw.

TECH CAPACITY : Φ420*650

FOLDER : M16, Number of control axes :4, Swinging on bed : dia650mm, Swinging back and front : dia 420mm, Cross feeding movement : dia 330mm, Center opening distance : 650mm, Maximum processing dia x length : dia 420 x 650mm, Tool outer dia : 25mm, Tool inner dia : 40mm, Rated voltage : 200V, Number of phase : 3P, Frequency : 50Hz, Rated capacity : 32.7kVA, Main motor rated current : 96A.

TECH CAPACITY : Φ420*650

FOLDER : M15, Number of control axes :4, Swinging on bed : dia650mm, Swinging back and front : dia 420mm, Cross feeding movement : dia 330mm, Center opening distance : 650mm, Maximum processing dia x length : dia 420 x 650mm, Tool outer dia : 25mm, Tool inner dia : 40mm, Rated voltage : 200V, Number of phase : 3P, Frequency : 50Hz, Rated capacity : 32.7kVA, Main motor rated current : 96A.

TECH CAPACITY : Φ420*650

FOLDER : M14, Number of control axes :4, Swinging on bed : dia650mm, Swinging back and front : dia 420mm, Cross feeding movement : dia 330mm, Center opening distance : 650mm, Maximum processing dia x length : dia 420 x 650mm, Tool outer dia : 25mm, Tool inner dia : 40mm, Rated voltage : 200V, Number of phase : 3P, Frequency : 50Hz, Rated capacity : 32.7kVA, Main motor rated current : 96A.

TECH CAPACITY : 450rpm

FOLDER : M13, ST Measurement rotation speed : 450rpm, Machine spindle electric motor : 7.5kw 4P 200V 50 Hz 3Phase,Feed ball outer dia : 40mm, Feed ball screw pitch : 10mm, Rapid traverse speed : 6000mm/min, Rapid traverse- servo motor rotation speed : 600rpm, Spindle rotation speed : 1297, 1st cutting feed rate : 137.1 mm/min, Servo motor rotation speed : 13.71 rpm, 1nd cutting feed rate : 411.3mm/min, Servo motor rotation speed : 41.13rpm, Loader lateral feed speed : 60m/min, Pinion pitch dia :72mm, reduction ratio : 11.24, Servo motor rotation speed : 2983 rpm, Net mass : 13,000kg.

TECH CAPACITY : Φ:210x14 stations

TECH CAPACITY : DIA 210x8stations, Distance b/w both principal axes : 340mm, Maximum swing : 295mm, Chuck size standard : 165mm/205mm, Loader : 120mm, without loader : 230mm, Turret number of station : 8/12 options, Stroke X Axis : 130mm, Stroke Z Axis : 145mm, Rapid travel speed (x axis & Z axis) : 24m/min, Spindle rotation speed (standard) : 45~4500rpm, Spindle rotation speed (option) : 30~3000rpm, Spindle rotation speed (option) : 60~6000rpm, Boring bar maximum dia : 40mm, Total weight(with loader and tools) : approximately 4400kg, Required floor space : width 1900mm x depth 1955mm, Stroke (X,Y,Z axis) : 1600 x 550 x 205mm, Maximum speed (X,Y,Z) : 160 x 120 x 35m/min, Chuck outer dia : 90mm, Jaw stroke : 30mm, Line volts : 200V, Cycles : 50HZ, 3 Phase, Interrupting capacity : 18KA, Power capacity : 32KVA.

TECH CAPACITY : Φ:200x10stations

TECH CAPACITY : DIA 210x8 stations, Maximum swing : 295mm, Chuck size : 165mmx210mm, Tooling : turret, Number of tools : STD-8 OP-12, Spindle nose : JISA2-5, Spindle AC Motor : STD-7.5KW/30min OP-11KW/30min, Gross weight with loader : 2500kg, Rated voltage : 210V, Frequency : 60Hz, 3Phase : Full load : 50A, Stroke X Axis : 130mm, Stroke Z Axis : 145mm, Rapid travel speed (x axis & Z axis) : 24m/min, Spindle rotation speed (standard) : 45~4500rpm, Spindle rotation speed (option) : 30~3000rpm, Spindle rotation speed (option) : 60~6000rpm, Standard tools : 20mm, Boring bar maximum diameter : 40mm, Total weight(with loader) : approximately 2500kg, Total weight(without loader) : approximately 2200kg, Required floor space : width 980mm x depth 1650mm, Stroke (X,Y,Z axis) : 1880 x 485 x 155mm, Maximum speed (X,Y,Z) : 120 x 110 x 35m/min, Chuck outer dia : 90mm, Jaw stroke : 30mm, Maximum material weight : 3kg x 2.

TECH CAPACITY : Φ:210x14 stations

TECH CAPACITY : DIA 210x8stations, Distance b/w both principal axes : 340mm, Maximum swing : 295mm, Chuck size standard : 165mm/205mm, Loader : 120mm, without loader : 230mm, Turret number of station : 8/12 options, Stroke X Axis : 130mm, Stroke Z Axis : 145mm, Rapid travel speed (x axis & Z axis) : 24m/min, Spindle rotation speed (standard) : 45~4500rpm, Spindle rotation speed (option) : 30~3000rpm, Spindle rotation speed (option) : 60~6000rpm, Boring bar maximum dia : 40mm, Total weight(with loader and tools) : approximately 4400kg, Required floor space : width 1900mm x depth 1955mm, Stroke (X,Y,Z axis) : 1600 x 550 x 205mm, Maximum speed (X,Y,Z) : 160 x 120 x 35m/min, Chuck outer dia : 90mm, Jaw stroke : 30mm, Line volts : 200V, Cycles : 50HZ, 3 Phase, Interrupting capacity : 18KA, Power capacity : 32KVA.

TECH CAPACITY : Φ:210x14 stations

FOLDER : M22, TECH CAPACITY : DIA 210x8stations, Distance b/w both principal axes : 340mm, Maximum swing : 295mm, Chuck size standard : 165mm/205mm, Loader : 120mm, without loader : 230mm, Turret number of station : 8/12 options, Stroke X Axis : 130mm, Stroke Z Axis : 145mm, Rapid travel speed (x axis & Z axis) : 24m/min, Spindle rotation speed (standard) : 45~4500rpm, Spindle rotation speed (option) : 30~3000rpm, Spindle rotation speed (option) : 60~6000rpm, Boring bar maximum dia : 40mm, Total weight(with loader and tools) : approximately 4400kg, Required floor space : width 1900mm x depth 1955mm, Stroke (X,Y,Z axis) : 1600 x 550 x 205mm, Maximum speed (X,Y,Z) : 160 x 120 x 35m/min, Chuck outer dia : 90mm, Jaw stroke : 30mm, Line volts : 200V, Cycles : 50HZ, 3 Phase, Interrupting capacity : 18KA, Power capacity : 32KVA.

TECH CAPACITY : Φ:210x14 stations

FOLDER : M21, TECH CAPACITY : DIA 210x8stations, Distance b/w both principal axes : 340mm, Maximum swing : 295mm, Chuck size standard : 165mm/205mm, Loader : 120mm, without loader : 230mm, Turret number of station : 8/12 options, Stroke X Axis : 130mm, Stroke Z Axis : 145mm, Rapid travel speed (x axis & Z axis) : 24m/min, Spindle rotation speed (standard) : 45~4500rpm, Spindle rotation speed (option) : 30~3000rpm, Spindle rotation speed (option) : 60~6000rpm, Boring bar maximum dia : 40mm, Total weight(with loader and tools) : approximately 4400kg, Required floor space : width 1900mm x depth 1955mm, Stroke (X,Y,Z axis) : 1600 x 550 x 205mm, Maximum speed (X,Y,Z) : 160 x 120 x 35m/min, Chuck outer dia : 90mm, Jaw stroke : 30mm, Line volts : 200V, Cycles : 50HZ, 3 Phase, Interrupting capacity : 18KA, Power capacity : 32KVA.

FOLDER : 29, FULL LOAD CURRENT : 3.5A/8A.

FOLDER : 28, Discharge voltage : 500 V or 300 V, selectable, Discharge frequency : One of three frequencies automatically set for the discharge conditions. 500 Hz max, Voltage accuracy : Main voltage ± 1%, However, input voltage coefficient of variation within ± 10%, Discharge conditions : 6 types, Counter electrode cleaning : Automatic regeneration by reversing electrode polarity after each analysis, Spark stand : Stand for argon atmosphere, Wavelength range : 121 to 481 nm and 589 nm, Diffraction grating : Concave radius of curvature: 600 mm Number of grooves: 2400/mm Reciprocal dispersion: 0.69 nm/mm.

FOLDER : 27, Captures a 3D shape in as little as 4 seconds with a resolution of 0.1 μm. * Reference scale 0.1 μm. Acquires measurement data at 800,000 points in as little as four seconds with a working distance of 75 mm.

FOLDER : 26, Captures a 3D shape in as little as 4 seconds with a resolution of 0.1 μm. * Reference scale 0.1 μm. Acquires measurement data at 800,000 points in as little as four seconds with a working distance of 75 mm.

TECH CAPACITY : Automatic dimensions : 110 x 110mm

FOLDER : 25, Automatic dimensions : 110 x 110mm, Maximum movement : 50 x 50mm, Minimum movement : 1μmm, Moving speed : 1-25mm/sec adjustable.

TECH CAPACITY : Automatic dimensions : 110 x 110mm

FOLDER : 24, Automatic dimensions : 110 x 110mm, Maximum movement : 50 x 50mm, Minimum movement : 1μmm, Moving speed : 1-25mm/sec adjustable.

FOLDER : 23

FOLDER : 22, FULL LOAD CURRENT : 4.0A/9.8A.

FOLDER : 21, Lapping Plate Size : 850 x 45 thk, Power : 1 HP, Voltage : 230 V, Frequency : 50 Hz, Phase : Single Phase, Disc Diameter : 10inch, Display Type : LCD.

FOLDER : 20, Latest generation electro-hydraulic press for metallographic embedding. With pre-programmed Struers heating chambers/mold and method/application guide for all embedding diameters – Memory for user-defined embedding method database with capacity for 15 programs, working range 80 – 180 °C, 5 °C steps – Heating ramp between 1 to 15 minutes / 0.5 minute steps, pressure range 50 to 350 bar – Option to attach an automatic thermoplastic resin dispenser.

FOLDER : 18, 8 x 60 Inch Wet Sander.

FOLDER : 17, Rotated voltage : 200V, No-load rotation speed : 2350rpm, Grinding wheel diameter : 255mm, Grinding wheel thickness : 1.2mm, Hole diameter : 31.75mm, Power frequency : 50Hz, Motor output : 2.2KW.

FOLDER : 16, Rotated voltage : 200V, No-load rotation speed : 2350rpm, Grinding wheel diameter : 255mm, Grinding wheel thickness : 1.2mm, Hole diameter : 31.75mm, Power frequency : 50Hz, Motor output : 2.2KW.

FOLDER : 15, Rotated voltage : 200V, No-load rotation speed : 1560rpm, Grinding wheel diameter : 455mm, Grinding wheel thickness : 3.5mm, Power frequency : 50Hz, Motor output : 7.5KW.

FOLDER : 14, Angle : plus or minus 100deg, Capacity : plus or minus 3KN.m, Mass : 460kg.

FOLDER : 13, Rotational speed : plus or minus 0.5~50rpm, Rotational speed measurement accuracy : plus or minus 0.3%F.S, Torque control accuracy : plus or minus 0.5% F.S, Speed detector : motor encoder.

FOLDER : 12, Moving speed : 10-2mm/sec(variable with jog dial), Fixed method : Hydraulic clamp (8.25KN x 4Pieces), Motor capacity : 30KW, Mass : 215kg.

FOLDER : 11, Input power : 191 NM, Output power : 2000 NM, Normal stroke : 100mm.

FOLDER : 10, Stroke: 25 deg, Weight : 240kg.

FOLDER : 9, Capacity : 50mm.

FOLDER : 8, Maximu vibration force : plus or minus 3kN, Maximum angle : plus or minus 50 deg, Maximum speed : 260deg/s, Frequency range : 0.001~50Hz, Center height : 350mm, Flange Circumference : 0~1200mm, Mass : 3000kg.

FOLDER : 7, Stroke : 55deg, NO : V-1274, Weight : 2400kg.

FOLDER : 6, Capacity : plus or minus 10ton.f

FOLDER : 5, Angle : plus or minus 50 deg, Mass : 290kg.

FOLDER : 4, Theoretical static force : plus or minus 98KN, Maximum dynamic force : plus or minus 79KN, Maximum displacement amplitute : plus or minus 25mm, Maximum speed : plus or minus12.5cm/sec, Oil pressure source : 15KW, Maximum pressure : 20MPa, Rated flow : 32.4L/min, Mass : 2900kg.

FOLDER : 3, Theoretical static force : plus or minus 150KN, Maximum dynamic force : plus or minus100KN, Maximum displacement amplitute : plus or minus25mm, Maximum velocity : plus or minus12.56cm/sec, Hydraulic power source motor power : 22KW, Maximum pressure : 20MPa, Rated flow : 55.6L/min, Mass : 3500kg.

FOLDER : 2, Maximum vibration force : plus or minus 3kN, Maximum angle : plus or minus 50 deg, Maximum speed : 260deg/s, Frequency range : 0.001~50Hz, Center height : 350mm, Flange Circumference : 0~1200mm.

FOLDER : 1, Maximum angle : plus or minus 50 deg, Maximum speed : 350 deg/S, With observation window : 250 x 250mm, Mass : 300 kg.

TECH CAPACITY : Φ:280X12 STATIONS

Rated voltage : 200V, Number of phases : 3P, Frequency : 50/60Hz, Rated capacity : 45KVA, Rated current : 130A, Main motor rated current : 53A, Main circuit breaker capacity : 30KA.

TECH CAPACITY : Φ:280X12 STATIONS

Rated voltage : 200V, Number of phases : 3P, Frequency : 50/60Hz, Rated capacity : 45KVA, Rated current : 130A, Main motor rated current : 53A, Main circuit breaker capacity : 30KA.

TECH CAPACITY : Φ:280X12 STATIONS

Rated voltage : 200V, Number of phases : 3P, Frequency : 50/60Hz, Rated capacity : 45KVA, Rated current : 130A, Main motor rated current : 53A, Main circuit breaker capacity : 30KA.

TECH CAPACITY : Φ:280X12 STATIONS

Control : FANUC 18-T, Center distance between spindles : 450mm, Max Turning diameter : 380 mm - MANUAL LOAD or with ROBOTMax. Turning diameter: 160 mm - with OGL LOADERMax. Turning length: 230mm, RIGHT and LEFT SPINDLE : Spindle taper : A 2-8, Spindle bore : 82 mm, Spindle speed : 35 - 3500, Max power available : 18,5 KW, Longitudinal slide travel - Z : 230 mm, Cross slide travel - X: 225 mm, Rapid feeds X - Z AXES: 24/30 m/min, Tool stations: 12 + 12, Machine weight: about 9200 Kg, Floor space: 3.8 x 5.5 m, Rated voltage : 200V, Number of phases : 3P, Frequency : 50/60Hz, Rated capacity : 70KVA, Rated current : 200A, Main motor rated current : 74A, Main circuit breaker capacity : 30KA.

TECH CAPACITY : Φ:254x12 stations

Chuck size : STD: 210mm(8") OPT: 254mm(10"), Number of tools : STD: 10x2 OP : 12x2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm, 3500 rpm, Spindle AC motor : 15 kW/30minx2, 22 kW/30minx2, Number of gantry loader : 1, Tooling : Turret, Gross weight with loader : 7200 kg, Rated voltage : 200V, Frequency : 50Hz, Number of phase : 3P, Full load current : 213A.

TECH CAPACITY : Φ:254x12 stations

Chuck size : STD: 210mm(8") OPT: 254mm(10"), Number of tools : STD: 10x2 OP : 12x2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm, 3500 rpm, Spindle AC motor : 15 kW/30minx2, 22 kW/30minx2, Number of gantry loader : 1, Tooling : Turret, Gross weight with loader : 7200 kg, Rated voltage : 200V, Frequency : 50Hz, Number of phase : 3P, Full load current : 213A.

TECH CAPACITY : Φ:254x12 stations

Chuck size : STD: 210mm(8") OPT: 254mm(10"), Number of tools : STD: 10x2 OP : 12x2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm, 3500 rpm, Spindle AC motor : 15 kW/30minx2, 22 kW/30minx2, Number of gantry loader : 1, Tooling : Turret, Gross weight with loader : 7200 kg, Rated voltage : 200V, Frequency : 50Hz, Number of phase : 3P, Full load current : 213A.

TECH CAPACITY : Φ:254x12 stations

Chuck size : STD: 210mm(8") OPT: 254mm(10"), Number of tools : STD: 10x2 OP : 12x2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm, 3500 rpm, Spindle AC motor : 15 kW/30minx2, 22 kW/30minx2, Number of gantry loader : 1, Tooling : Turret, Gross weight with loader : 7200 kg, Rated voltage : 200V, Frequency : 50Hz, Number of phase : 3P, Full load current : 213A.

N/A

TECH CAPACITY : Φ:254x12 stations

Chuck size : STD: 210mm(8") OPT: 254mm(10"), Number of tools : STD: 10x2 OP : 12x2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm, 3500 rpm, Spindle AC motor : 15 kW/30minx2, 22 kW/30minx2, Number of gantry loader : 1, Tooling : Turret, Gross weight with loader : 7200 kg, Rated voltage : 200V, Frequency : 50Hz, Number of phase : 3P, Full load current : 213A.

TECH CAPACITY : Φ:254x10 stations

Chuck size : STD: 210mm(8") OPT: 254mm(10"), Number of turret stations : 10, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm, 3500 rpm, Spindle AC motor : STD 15 kW/30min, OP 22 kW/30min, Gross weight with loader : 5400 kg.

TECH CAPACITY : Φ:254x10 stations

Chuck size : STD: 210mm(8") OPT: 254mm(10"), Number of turret stations : 10, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm, 3500 rpm, Spindle AC motor : STD 15 kW/30min, OP 22 kW/30min, Gross weight with loader : 5400 kg.

N/A

TECH CAPACITY : Φ:280X12 STATIONS

Control : FANUC 18-T, Center distance between spindles : 450mm, Max Turning diameter : 380 mm - MANUAL LOAD or with ROBOTMax. Turning diameter: 160 mm - with OGL LOADERMax. Turning length: 230mm, RIGHT and LEFT SPINDLE : Spindle taper : A 2-8, Spindle bore : 82 mm, Spindle speed : 35 - 3500, Max power available : 18,5 KW, Longitudinal slide travel - Z : 230 mm, Cross slide travel - X: 225 mm, Rapid feeds X - Z AXES: 24/30 m/min, Tool stations: 12 + 12, Machine weight: about 9200 Kg, Floor space: 3.8 x 5.5 m, Rated voltage : 200V, Number of phases : 3P, Frequency : 50/60Hz, Rated capacity : 70KVA, Rated current : 200A, Main motor rated current : 74A, Main circuit breaker capacity : 30KA.

TECH CAPACITY : Φ:254x12 stations

Chuck size : STD: 210mm(8") OPT: 254mm(10"), Number of tools : STD: 10x2 OP : 12x2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm, 3500 rpm, Spindle AC motor : 15 kW/30minx2, 22 kW/30minx2, Number of gantry loader : 1, Tooling : Turret, Gross weight with loader : 7200 kg.

TECH CAPACITY : Φ:254x12 stations

Chuck size : STD: 210mm(8") OPT: 254mm(10"), Number of tools : STD: 10x2 OP : 12x2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm, 3500 rpm, Spindle AC motor : 15 kW/30minx2, 22 kW/30minx2, Number of gantry loader : 1, Tooling : Turret, Gross weight with loader : 7200 kg.

TECH CAPACITY : Φ:254x12 stations

Chuck size : STD: 210mm(8") OPT: 254mm(10"), Number of tools : STD: 10x2 OP : 12x2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm, 3500 rpm, Spindle AC motor : 15 kW/30minx2, 22 kW/30minx2, Number of gantry loader : 1, Tooling : Turret, Gross weight with loader : 7200 kg.