TECH CAPACITY : 2000T(Φ200)8

Nominal Force:2000 ton, Upsetting slide stroke:570 mm Stroke of moving matrix:280 mm Upsetting slide strokes per minute:25 Main motor:160 kW Dimensions:6400 mm х 9000 mm х 4500 mm Weight: 270 ton

TECH CAPACITY : 1500t

CAPACITY: 1500 T, WITH MANIPULATOR 10 T 1) Hydraulic press 1500t Manufacturer: "HYDRAULIC", Duisburg, Germany Force - 1500t Stroke - 1600mm Number of strokes per min. - 4 Distances between columns - 1800 and 1450 mm Power - 300 Kw Press dimensions (LxWxH) - 3650x2750x9055 Press weight - 252t 2) Manipulator MK10-66L Year - 1971 Manufacturer - Plant of heavy forging and pressing equipment, Ryazan city, Russia. Lifting capacity, kN 100 Load moment, kN 250 The largest diameter of the pincers turning circle, mm 1900 Distance from the end of the jaws to the frame, mm 2245 Clamp opening range, mm 1480 ... 200 The smallest height of the trunk axis from the rail head, no more, mm 1225 The greatest parallel rise of the trunk, no more, mm 700 Angle of lateral rotation of the trunk around the vertical axis, degrees 360 Clamp rotation frequency, min-1 10.7 Manipulator movement speed, m / min 40 The speed of movement of the trunk in the vertical plane, m / min 1.9 Base, mm 4400 Track width, mm 4000 Manipulator dimensions, mm length 8435 width 1950 height from rail head 4225 Power, kW 30 Weight,45 t

TECH CAPACITY : 1600T

3 STAGE DIE SET -- Length : 1260mm, With : 1200mm, Height : 785mm.

INDIA

TECH CAPACITY : 800t

N/A

TECH CAPACITY : 1600T

NIL

TECH CAPACITY : 1000T

Stroke: 600mm, Day Light: 1000, Slide length-1500*1100, Bolster Length: 1500*1200, Electric motor: 30KW, 1 Tower

TECH CAPACITY : 1000T

N/A

TECH CAPACITY : 1600T

N/A

TECH CAPACITY : 1200T

N/A

TECH CAPACITY : 630T

N/A

TECH CAPACITY : 1T

t:1/8, 46omm, 11KW, 5500kg

TECH CAPACITY : 2.2T

Dropping Section weight : 2250 Kg, Normal Die Weight : 450 Kg (Maximum) Maximum Stroke : 950 mm, Guide Distance : 590 mm, Die Thickness : 350 mm, Ram Bottom Surface size : 570 w * 550 mm, Inlet Pipe Size : 100 (A) (4B), Exhaust Pipe Size : 125(A) (5B), Maximum Stamping Force : 6800 Kg-m, Required Air Compressor Capacity ; 110 Kw, Maximum Air Pressure : 7 Kg/cm2

INDIA

TECH CAPACITY : 6000mm

Outside Diameter of Finished Ring: 1,200 ~ 6,300 mm Height of Finished Ring: 80 ~ 1,000 mm Inside Diameter of Ring Blank for Mandrel Diameter: ￠300mm min. 320 mm Height of Ring Blank: max. 1,050 mm Ring Weight max. :approx. 12,000 Kg Radial Rolling Force :max. 300 Ton Main Roll Diameter: ￠1,200 mm Rolling Speed max. :approx. 1.7 m/sec Horizontal Stroke of Mandrel: 1,000 mm Axial Rolling Force: 250 Ton Length of Taper Theoretical :1,400 mm Taper Cone Angle :35˚ Horizontal Stroke of Axial Roll Stand: 5,700 mm Vertical Stroke of Upper Axial Roll: 1,050 mm Max Distance Between the Axial Roll: 1,120 mm Main Roll Driving Motor: DC710Kw×570Volt Axial Roll Driving Motor: DC710Kw×570Volt Hydraulic Main Pump Motor: 4sets-90Kw×440Volt×60Hz Cooling Circulation Motor 2 sets-3.7Kw×440Volt×60Hz Hydraulic Pump: 4sets-A4V-180 (REXROTH) Max Total Flow :720 Litter/min Operation Pressure: 210 Kg/㎠ Grease Lubrication Unit :2 sets

TECH CAPACITY : 1000mm

Dia : 1,120 mm, Height:225 mm, Type :RAW 40/25-900/225 (Upgraded 2019), Radial:40 tonnes, Axial:25 tonnes, Min dia:200 mm, Min Ring Height:40 mm, Radial Rolling Pressure parameters: Radial rolling pressure for mandrels I and II: 4 to 40 tonnes, Radial rolling pressure for mandrel III: 4 to 16 tonnes, Axial Rolling Pressure parameters: Axial rolling pressure for characteristic circles K 1 and K 2: 2 to 25 tonnes, Axial rolling pressure for characteristic circles K 3: 2 to 20 tonnes, Axial rolling pressure for characteristic circles K 4: 2 to 16 tonnes, Outside diameter of Mandrels: Diameter of mandrel I: 120mm (4.72"), Diameter of mandrel II: 95mm (3.74"), Diameter of mandrel III: 70mm (2.76"), Inside diameter of Mandrels: Diameter of mandrel I: 130mm (5.12"), Diameter of mandrel II: 100mm (3.94"), Diameter of mandrel III: 75mm (2.95"), Max outside diameter of Blank: 475mm (18.70"), Max area of Ring Face: 264 sq. inches, Max Axial width of ring: 225mm (8.86"), Min Axial width of Ring: 40mm (1.57"), Approx Max outside diameter of ring: 1,120mm (44.1"), Approx Min outside diameter of ring: 230mm (9.06"), Approx Min outside diameter of ring w/Mandrel II & for a Min final wall thickness: 9.9mm (0.39"), Travel of Mandrel Carriage: 560mm (22.05"), Nominal rolling speed: 1.3 mtrs/sec (49.21 in/sec), Nominal powers required: For Radial drive: 80kW (107hp), For Axial drive: 32kW (43hp)

TECH CAPACITY : 5000mm

2) Ring Rolling Year : 2007 Dia : 1000 ~ 5000mm, Height of Ring : 80 ~1000mm, Mandrel dia : 300mm, Rolling Force : Max.300T, Rolling Speed : 1.7m/s, Main roll Dia : 1100mm, Horizontal Stroke of Mandrel : 1000mm, Vertical Stand - rolling Force : Max.250t Distance between the tapper rolls : 1060mm, Hydraulic pump : 75kw*4 sets, Oil cooler AC Motor : 3.7kw*2 sets

TECH CAPACITY : M8

1D2B, Maximum wire cutting dia : 8X90mm, SPM : 100, Dice Size : 44*90 mm, Punch Size : 40*85 mm, Quill Size : 18*55 mm, Cuter : Open, Motor : 3.7 KW

INDIA

TECH CAPACITY : M5

1D2B, Wire diameter : 4.8 mm, Cut-off Length : 35 mm, Kick-out Length : 25 mm, Die Diameter : 35 mm, 1st Punch Diameter : 20 mm, 2nd Punch Diameter : 26 mm, Punch Shift Stroke : 36 mm, Quill Diameter : 18, P.K.O. Stroke : 4(12), Motor (kW/Pole) : 5.5 Kw/4 Pole, Output rate (ppm) : 300 ~ 350, Net Weight (kg) : 3000 kg

INDIA

TECH CAPACITY : M20

1D2B, BOLT DOUBLE HEADER MACHINE: Capacity: 1D2B, Maximum diameter                   : 20mm, Max Stroke length                       : 200mm, Maximum production                : 35 pieces/minute, motor Power                                : 30kw, Machine Dimension:                                   Length         : 6200mm,                                    Width          : 2800mm,                                   Height          : 2000mm,                                  Net Weight  : 25Ton with complete accessories( Coil feeder, Conveyor belt). Trimming Machine (Trimming):                    Make                         : Yoshihara Trimming Machine,                    model number       :  YT-8,               Capacity:                Maximum diameter : 24mm,                Maximum length      : 200mm,            Maximum production : 37 pieces/minute, Trimming  Machine Dimension:                            Length               : 3200 mm,                           Width                  : 2300 mm,                           Height                 : 3100 mm,                           Motor Power     : 15KW,                           Net Weight        : 8 Ton. The Machine has its Complete Accessories.

INDIA

TECH CAPACITY : M8

1D1B, Maximum Cutting diameter : 8 mm, Max Cut-off Length : 110mm, Max knockout Length : 100 mm, Main Dice Hole (Dia * Depth) : 64 x 140mm, Shear Dice Hole (Dia * Depth) :28 x 120 mm, Pusher Dice Hole (Dia * Depth) : 20 x 120 mm, No. 1 Hole Dice Hole (Dia * Depth) : 30 x 70 mm, No. 2 Hole Dice Hole (Dia * Depth) : 35 x 60 mm, Punch Center Distance: 40 mm, Crank Stroke: 185 mm, Feed Roller Dia: 190 mm, Distance before dead point: 25 mm, Production capacity: 80-160 pcs/min, Forming capacity: 40T, Main Motor: 7.5kW (6P), Machine weight: 5,600 kg, Special Accessories: PKO Length: 16 mm, Variable Speed Motor: 11 (VS) kW, Speed Variation Range: 80 - 160 pcs/min,

INDIA

TECH CAPACITY : M17

Forming Station: 4 station, Forming capacity: 87 T, Knife Type: Open, Max. cut-off diameter: 17 mm, Max. cut-off length: 1/2 d *10 mm, Quill size: dia 60 x 75 mm, Punch size: dia 55 x 125 mm, Dice size: dia 73.02 x 140 mm, KO Length: H16 mm, Production capacity: 200 SPM, Main motor: 18.5 kW, Power Supply: 25 KVA, Machine weight: 16,500 kgs, Table type: Horizontal

INDIA

TECH CAPACITY : M28

Forming Station : 5 Station, Capacity(T) : 260, Station : 5, Type of Knife : Open, Cutting Diameter(mm) : 27-28, Cutting Length(mm) 12-25, Quill Size (Diameter) : 75*100, Punch Size (Diameter) : 80*233, Dice Size (Diameter) : 120.65*200, KO Length(mm) : 40, Speed(SPM) : 80, Main Motor(kw) : 45, Power Supply(KVA) : 50, Machine Mass(kg) : 45,000

INDIA

TECH CAPACITY : M26

Hydraulic pressure :26000kgf, Cutting wire dia : 26mm, Cutting length : 13mm~100mm, Cut off zen : 18,500kgf, Tile size * Length : 80mm*80mm*54mm,punch case dia*length : 80*233mm, die diameter * length distance : 120.65*200mm, between dies : 138mm, Die punch holder : 60mm, Die block : 200, punch holder thickness : 160mm, PKO Length : 35mm, KO Volume : 100mm, Crank stroke (ram stroke) : 230mm, Crank pin dia : 350mm, SPM : 85-72-60,motor power : 37kw 6p, Transferable length : 100mm, Blank turn possible length : 40mm, Adaptive line : 20mm*26mm, Coil inner diameter : 850mm, Coil outer diameter : 1,500mm, Feed Speed : 12/6 points (60), Motor power : 2.2K.

INDIA

TECH CAPACITY : M24

Forming Station : 5 station, Capacity(T) : 200, Station : 5,Type of Knife : Open, Cutting Diameter(mm) : 23, Cutting Length(mm) : 12-50, Quill Size (Diameter): 75*100, Punch Size (Diameter) : 60*185, Dice Size (Diameter): 100*140, PKO Length(mm) : 23, KO Length (mm) : 40, Speed(SPM) : 80, Main Motor(kw) : 37, Power Supply(KVA) : 45, Machine mass(kg) : 32,000

INDIA

TECH CAPACITY : T:1400 x 700

Horizontal Milling Machine, Spindle Speed : (30-1500) RPM x axis : 1400 mm y axis : 400 mm z axis : 600 mm Table Size : 1400*700 mm Motor Power : 7.5 KW Operating Volt : 400 V

India

TECH CAPACITY : 19mm

SWING : 420 , DRILLING CAPACITY S45C : 4 *19 , DRILLING CAPACITY - FC200 : 4 *23 , MAX. DISTANCE SPINDLE TO TABLE : 485 , MAX. DISTANCE SPINDLE TO BASE : 720 , UP-AND-DOWN MOTION OF SPINDLE : 120, SPINDLE TAPER : MT 3 , DIA. OF COLUMN : 100 , SIZE OF A TABLE : 370 , SPINDLE SPEED : 50 , POWER SUPPLY : 380 , DRIVE MOTOR : 0.75kW 6P , TYPE OF V-BELT : A-34?A-27 , MACHINE TOTAL HEIGHT :1279 , NET WEIGHT : 130 , DIMENSION OF BASE : 340 * 600 , UP-AND-DOWN MOTION OF TABLE : 425

India