Stocks List

« Previous 1 Next » Show All Showing 1 - 23 Records 23 Stock(s) Found!

GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : STAMPING PRESSES SUB CATEGORY : TANDEM LINE       TYPE : TANDEM LINE
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
152942 HITACHI ZOSEN QP-55065 N/A N/A
TECH CAPACITY : 3000T
UNIT 1 - MAKE : HITACHI ZOSEN, MODEL : QP-55065, Capacity : 3000t, Stroke length : 500mm, Number of strokes : 12 spm, Slide adjustment : 400mm, Slide dimensions(left to right x front to back) : 2000×8000mm, Bolster dimensions(left to right x front to back) : 2000×8000mm, Bolster thickness : 300mm. UNIT 2 - MAKE : HITACHI ZOSEN, MODEL : QP-8981, Capacity : 2000t, Stroke length : 460mm, Number of strokes : 12 spm, Slide adjustment : 400mm, Slide dimensions(left to right x front to back) : 1980×7400mm, Bolster dimensions(left to right x front to back) : 1980×7400mm, Bolster thickness : 280mm. UNIT 3 - MAKE : HITACHI ZOSEN, MODEL : QP-423, Capacity : 2000t, Stroke length : 500mm, Number of strokes : 12 spm, Slide adjustment : 400mm, Slide dimensions(left to right x front to back) : 1980×7620mm, Bolster dimensions(left to right x front to back) : 1980×7620mm, Bolster thickness : 280mm.
JAPAN
152933 IHI IHI-2300 N/A N/A
TECH CAPACITY : 2300T
UNIT 1 - MAKE : IHI, Capacity :2300t, Stroke length : 850mm, Number of stroke : 16 spm, Die height : 1400mm, Slide adjustment : 500mm. UNIT 2 - MAKE : IHI, Capacity :1000t, Stroke length : 650mm, Number of stroke : 20 spm, Die height : 1600mm, Slide adjustment : 650mm. UNIT 3 - MAKE : IHI, Capacity :1000t, Stroke length : 650mm, Number of stroke : 20 spm, Die height : 1600mm, Slide adjustment : 650mm. UNIT 4 - MAKE : IHI, Capacity :1000t, Stroke length : 650mm, Number of stroke : 20 spm, Die height : 1600mm, Slide adjustment : 650mm. UNIT 5 - MAKE : IHI, Capacity :1000t, Stroke length : 650mm, Number of stroke : 20 spm, Die height : 1600mm, Slide adjustment : 650mm.
JAPAN
152920 AMINO AMINO-1600 N/A N/A
TECH CAPACITY : 1600T
UNIT 1 - MAKE : AMINO, Capacity : 1600t, UNIT 2 - MAKE : IHI, MODEL : SL4-1500-440-210, Capacity : 1500t, UNIT 3 - MAKE : IHI, MODEL : SL4-2300-450-220, Capacity : 2300t, UNIT 4 - MAKE : KOBE, Capacity : 1200t.
JAPAN
152891 CLEARING TF-41400-160-100 N/A N/A
TECH CAPACITY : 1000T
UNIT 1 - Capacity : 1000t, Inner : 800t, Outer : 600t, Lower slide : 450t, Bolster : 100 inches x 160 inches, Weight : 310t. UNIT 2 - MODEL : TF-41400-160-100, Capacity : 800t, Stroke length : 600mm, Number of stroke : 20spm, Slide adjustment : 450mm, Bolster dimension (left to right x front to back x thickness) : 3000 x 2000 x 270mm, Slide dimension (left to right x front to back) : 3000 x 2000mm.
JAPAN
152890 KOMATSU E4S800-MFC 1982 N/A
TECH CAPACITY : 800T
UNIT 1 - MODEL : E4S800-MFC, Capacity : 800t, Stroke length : 600mm, Number of stroke : 20spm, Die height : 1350mm, Slide adjustment : 550mm, Bolster dimension (left to right x front to back x thickness) : 3000 x 2000 x 270mm, Slide dimension (left to right x front to back) : 3000 x 2000mm, Main motor : 132 Kw. UNIT 2 - MODEL : NC-S4-5, Capacity : 500t, Stroke length : 600mm, Number of stroke : 15 spm, Shut height : 1200mm, Slide adjustment : 450mm, Slide dimension (left to right x front to back) : 3000 x 2000mm, Bolster dimension (left to right x front to back x thickness) : 3000 x 2200 x 200mm, Die cushion stroke : 300mm, Cushion pad area(left to right x front to back) : 1600 x 1250 x 2mm. UNIT 3 - MODEL : NC-S4-5, Capacity : 500t, Stroke length : 600mm, Number of stroke : 12 spm, Shut height : 1200mm, Slide adjustment : 450mm, Slide dimension (left to right x front to back) : 3020 x 2200mm, Bolster dimension (left to right x front to back x thickness) : 2990 x 2200 x 200mm, Die cushion stroke : 300mm, Cushion pad area(left to right x front to back) : 1250 x 1800 x 2mm.
JAPAN
152889 KOMATSU L4S1500-MBC 1994 19A0172
TECH CAPACITY : 1500T
UNIT 1 - MODEL : L4S1500-MBC, Capacity : 1500t, Stroke length : 800mm, Number of stroke : 5 & 8~16spm, Die height : 1350mm, Slide adjustment : 600mm, Slide dimension (left to right x front to back) : 3700 x 2000mm, Bolster dimension (left to right x front to back x thickness) : 3700 x 2000 x 280mm, Die connection capacity (1 pad 2 cylinders) : 300t, Die cushion stroke : 320mm, Main motor : 200 Kw, Emergency stop time : 320ms. UNIT 2 - MODEL : S4-750-45x21, Capacity : 750t, Stroke length : 750mm, Number of stroke : 12 spm, Slide adjustment : 450mm, Slide dimension (left to right x front to back) : 4572 x 2134mm, Bolster dimension (left to right x front to back x thickness) : 4572 x 2134 x 200mm, Die cushion stroke : 440mm. UNIT 3 - NC-S4-8, Capacity : 800t, Stroke length : 600mm, Number of stroke : 15 spm, Die height : 1500mm, Slide adjustment : 600mm, Slide dimension (left to right x front to back) : 4430 x 2200mm, Bolster dimension (left to right x front to back x thickness) : 4400 x 2200 x 250mm.
JAPAN
152888 KOMATSU L4S1000-MFC 1994 19A0171
TECH CAPACITY : 1000T
UNIT 1 - MODEL : L4S1000-MFC, Capacity : 1000t, Stroke length : 800mm, Number of stroke : 5 & 8~18spm, Die height : 1350mm, Slide adjustment : 600mm, Slide dimension (left to right x front to back) : 3000 x 1800mm, Bolster dimension (left to right x front to back x thickness) : 3000 x 1800 x 280mm, Die connection capacity (1 pad 2 cylinders) : 150t, Die cushion stroke : 300mm, Main motor : 160 Kw, Emergency stop time : 280ms. UNIT 2 - MODEL : PL-S4-500(1), Capacity : 500t, Stroke length : 600mm, Number of stroke : 12 spm, Slide adjustment : 600mm, Slide dimension (left to right x front to back) : 2700 x 1700mm, Bolster dimension (left to right x front to back) : 2700 x 1700mm, Die cushion stroke : 300mm, Main motor : 55 Kw. UNIT 3 - MODEL : PL-S4-400, Capacity : 400t, Stroke length : 460mm, Number of stroke : 15 spm, Slide adjustment : 360mm, Slide dimension (left to right x front to back) : 2700 x 1530mm, Bolster dimension (left to right x front to back) : 2700 x 1530mm, Knockout amount : 130mm, Main motor : 55 Kw. UNIT 4 - UNIT 2 - MODEL : NC-S4-5, Capacity : 500t, Stroke length : 600mm, Number of stroke : 12 spm, Shut height : 1200mm, Slide adjustment : 450mm, Slide dimension (left to right x front to back) : 2750 x 2000mm, Bolster dimension (left to right x front to back x thickness) : 2990 x 2200 x 200mm, Die cushion stroke : 300mm, Cushion pad area(left to right x front to back) : 1250 x 1800 x 2mm, Main motor : 55 Kw.
JAPAN
152703 KOMATSU E4S1000-MB N/A 1900944,1900943,1900942
TECH CAPACITY : 1000T
UNIT : 1, Capacity : 800t, Stroke length : 700mm, Number of stroke : 18rpm, Die height : 1700mm, Slide adjustment : 700mm, Bolster dimension (left to right x front to back x thickness) : 4000 x 2100 x 300mm, Slide dimension (left to right x front to back) : 4000 x 2100mm, Die connection capacity (1 pad 2 cylinders) : 120t, Die cushion stroke : 300mm, Main motor : 90 Kw. UNIT : 2, Capacity : 800t, Stroke length : 700mm, Number of stroke : 18rpm, Die height : 1700mm, Slide adjustment : 700mm, Bolster dimension (left to right x front to back x thickness) : 4000 x 2100 x 300mm, Slide dimension (left to right x front to back) : 4000 x 2100mm, Die connection capacity (1 pad 2 cylinders) : 120t, Die cushion stroke : 300mm, Main motor : 90 Kw.UNIT : 3, Capacity : 1000t, Stroke length : 700mm, Number of stroke : 18rpm, Die height : 1700mm, Slide adjustment : 700mm, Bolster dimension (left to right x front to back x thickness) : 4300 x 2100 x 300mm, Slide dimension (left to right x front to back) : 4300 x 2100mm, Die connection capacity (1 pad 2 cylinders) : 160t, Die cushion stroke : 300mm, Main motor : 110 Kw. UNIT : 4, Capacity : 1000t, Stroke length : 700mm, Number of stroke : 8~15rpm, Die height : 1600mm, Slide adjustment : 700mm, Bolster dimension (left to right x front to back x thickness) : 3700 x 2250 x 300mm, Slide dimension (left to right x front to back) : 3700 x 1750mm, Die connection capacity (1 pad 2 cylinders) : 150t, Die cushion stroke : 300mm, Main motor : 132 Kw. UNIT : 5, Capacity : 1000t, Stroke length : 700mm, Number of stroke : 18rpm, Die height : 1700mm, Slide adjustment : 700mm, Bolster dimension (left to right x front to back x thickness) : 4300 x 2100 x 300mm, Slide dimension (left to right x front to back) : 4000 x 2100mm, Die connection capacity (1 pad 2 cylinders) : 160t, Die cushion stroke : 300mm, Main motor : 110 Kw.
JAPAN
152457 SUMITOMO ES2-400-2515 N/A N/A
TECH CAPACITY : 400T
Capacity : 400t, Load curve : 13mm, Die height : 1200mm, Stroke length : 500, Number of stroke : 20 spm, Slide Adjustment : 500mm, Slide lower surface dimension (left and right * front and back) : 2500 * 1500, Bolster size (left and right * front and back) : 2500 * 1500, Bolster thickness : 200mm, Cushion capacity : 90T, Cushion stroke : 250mm, Electric motor for adjustment : 7.5 kw 1501rpm.
JAPAN
152456 IHI S2-400-250-150 N/A N/A
TECH CAPACITY : 400T
Capacity : 400T,Stroke length : 500mm, Die height : 1400mm, Slide size (left and right * front and back) : 2500 * 1500mm, Bolster size : 1650 * 2000mm, Bolster thickness : 200mm, Slide adjustment : 500mm, SPM : 20spm, Top height (above floor) : 650mm, Running speed : 4.22mm, Loading capacity : 20 ton, Air pressure : 5.5 kg/cm^2.
JAPAN
152455 HITACHI 57-JA-7508 1973 DF-21000-138
TECH CAPACITY : 500T
TANDAM LINE PRESS : 500t, 500t, 800t, 500t, 800t , 5 units one line. UNIT 1 - MAKE : HITACHI, MODEL : 57-JA-7508, Capacity : 500T, Stroke length : 900mm, Die height : 2200mm, Slide size : 2800 * 1600mm, Slide Adjustment : 600mm, Stroke/min : 6.UNIT 2 - MAKE : KOMATSU, Capacity : 500t, Stroke length : 660mm, Die height : 1700mm, Slide adjustment : 700mm, Number of stroke :10mm, Slide size (left and right * front and back) : 4000 * 1750mm, Bolster size : 4180 * 2045mm, Bolster thickness : 236mm, Die cushion Capacity : 30t, Die cushion stroke : 450mm,Air pressure : 5 kg/cm ^2, Main motor : 75 hp 1000 rpm. UNIT 3 - MAKE : IHI, MODEL : S4-800-400-200,Capacity : 800T,Stroke length : 600mm, Die height : 1400mm, Slide size (left and right * front and back) : 4000 * 1750mm, Bolster size : 4180 * 2045mm, Slide adjustment : 600mm, SPM : 20spm, Die cushion capacity : 160ton, Air pressure : 5 kg/cm^2. UNIT 4 - MAKE : CLEARING, Capacity : 500T. UNIT 5 - MAKE : SUMITOMO, Capacity : 800t, Load curve : 13mm, Die height : 900mm, Stroke length : 400, Number of stroke : 16 spm, Slide Adjustment : 400mm, Slide lower surface dimension (left and right * front and back) : 2140 * 1520, Bolster size (left and right * front and back) : 2140 * 1520, Bolster thickness : 280mm, Cushion capacity : 90T, Cushion stroke : 200mm, Cushion cylinder 1 pad, 2 cylinder, Normal air pressure : 3.5 kg/m,Main motor : 55KW 1000rpm, Electric motor for adjustment : 7.5 kw 1500rpm.
JAPAN
152454 SUMITOMO ES2-1200-2115 1973 N/A
TECH CAPACITY : 1200T
TANDAM LINE PRESS : 1200t, 1200t, 800t, 800t , 4 units one line. UNIT 1 - Capacity : 1200T, Load curve : 13mm, Die height : 900mm, Stroke length : 400, Number of stroke : 16 spm, Slide Adjustment : 400mm, Slide lower surface dimension (left and right * front and back) : 2140 * 1520, Bolster size (left and right * front and back) : 2140 * 1520, Bolster thickness : 280mm, Cushion capacity : 100T, Cushion stroke : 200mm, Cushion cylinder 1 pad, 2 cylinder, Normal air pressure : 5.5kg/m,Main motor : 95KW 1000rpm, Electric motor for adjustment : 5 kw 1500rpm. UNIT 2 - Capacity : 1200T, Load curve : 13mm, Die height : 900mm, Stroke length : 400, Number of stroke : 16 spm, Slide Adjustment : 400mm, Slide lower surface dimension (left and right * front and back) : 2140 * 1520, Bolster size (left and right * front and back) : 2140 * 1520, Bolster thickness : 280mm, Cushion capacity : 100T, Cushion stroke : 200mm, Cushion cylinder 1 pad, 2 cylinder, Normal air pressure : 5.5kg/m,Main motor : 95KW 1000rpm, Electric motor for adjustment : 5 kw 1500rpm. UNIT 3 - MODEL : E2-800-2115, Capacity : 800t, Load curve : 13mm, Die height : 900mm, Stroke length : 400, Number of stroke : 16 spm, Slide Adjustment : 400mm, Slide lower surface dimension (left and right * front and back) : 2140 * 1520, Bolster size (left and right * front and back) : 2140 * 1520, Bolster thickness : 280mm, Cushion capacity : 90T, Cushion stroke : 200mm, Cushion cylinder 1 pad, 2 cylinder, Normal air pressure : 3.5 kg/m,Main motor : 55KW 1000rpm, Electric motor for adjustment : 7.5 kw 1500rpm. UNIT 4 - MODEL : E2-800-2115, Capacity : 800t, Load curve : 13mm, Die height : 900mm, Stroke length : 400, Number of stroke : 16 spm, Slide Adjustment : 400mm, Slide lower surface dimension (left and right * front and back) : 2140 * 1520, Bolster size (left and right * front and back) : 2140 * 1520, Bolster thickness : 280mm, Cushion capacity : 90T, Cushion stroke : 200mm, Cushion cylinder 1 pad, 2 cylinder, Normal air pressure : 3.5 kg/m,Main motor : 55KW 1000rpm, Electric motor for adjustment : 7.5 kw 1500rpm.
JAPAN
151988 HITACHI BS2-600-400-200-105 N/A S2-18-2023-727
TECH CAPACITY : 1000T
CAPACITY:1000T,STROKE:800,DIE HEIGHT:1000mm,ADJUSTMENT SLIDE:600mm,BL:2800X1300,SL:2800X1300
JAPAN
151987 HITACHI S2-800-300-170 N/A 722-7-18-2012
TECH CAPACITY : 800T
CAPACITY:800T,LOWER EVENING :580mm,ADJUSTMENT SLIDE:500mm,DIE HEIGHT:1400mm,BL:3000mmx1700,SL:1700mm
JAPAN
151986 HITACHI S2-500-300-170(3) N/A 722-7-18-2013
TECH CAPACITY : 500T
CAPACITY:500T, LOWER EVENING:650mm,ADJUSTMENT SLIDE:500mm,DIE HEIGHT:1400mm,BL:300X1700,SL:3000X1700
JAPAN
151985 HITACHI S2-500-300-170(2) N/A 722-7-18-2013
TECH CAPACITY : 500T
CAPACITY:500T, LOWER EVENING:650mm, ADJUSTMENT SLIDE: 500mm, DIE HEIGHT :1400mm, BL:3000X1700,SL:3000X1700
JAPAN
151984 HITACHI S2-500-300-170 N/A 722-7-18-2013
TECH CAPACITY : 500T
CAPACITY : 500T, SLIDE ADJUSTMENT:500mm, LOWER EVENING:650mm,DIE HEIGHT:1400mm,BL : 3000x1700, SL : 3000x1700.
JAPAN
151854 KOMATSU E4S800-MB x 2 units E4S400-MB x 2 units 1980 N/A
TECH CAPACITY : 120T
Number of points 4 points ,Capacity 120t,Stroke length 600mm , SPM 8 ~ 18 , Die height 1320mm , Slide adjustment amount 200mm , Slide area 2500 × 1700mm ,Bolster area 2500 × 1700mm ,Bolster thickness 230mm (800t), 190mm ( 400t) Traction , motor 110kW (800t) 75kW (400t) ,Die cushion (800t only) ,Cushion stroke length 250mm Pad area 2050 x 1090mm.
JAPAN
151774 FUKUI MED300 & MDL500L2 1987 N/A
TECH CAPACITY : 300T
Capacity 300t, (3 units) Stroke 620mm, Die height 1100mm, Stroke per Minute: 20 spm, Operational Stroke: 15 rpm, Bolster dimensions 2500 x 1520mm Slide Dimensions: 2500*1520mm Capacity 500t, (1 unit) Stroke 788mm Die height 1100mm Stroke per Minute : 20spm, Operational Stroke : 15rpm, Bolster dimensions : 2700 x 1700mm, Slide Dimensions : 2700 x 1700mm,
JAPAN
151730 KOMATSU L4S1500-MB 2007 N/A
TECH CAPACITY : 1500T
Capacity : 1500T Stroke : 900mm, Stroke per Minute : 18spm, Die Height : 1250mm, Slide Adjustment : 400mm, Slide Area : 3400*2000mm, Bolster Area : 3400*2000*300mm, From the floor height of the Bolster : 750mm The height of the bed above the floor : 10mm With Die Cushion Die Cushion capacity: 300T Stroke: 300mm, Bolster Area: 2930*1510mm 800T * 2 specification: Capacity : 800T, Model No. : E4S800 Year : 1974 Point Size : 4, Stroke : 750mm, Stroke per Minute : 15spm, Die Height : 1620mm, Slide Adjustment : 400mm, Slide Size : 3400*2000mm, Bolster Size : 3400*2000mm, Thickness of Bolster : 300mm, Main Motor Capacity : 95kw*4p 600T* 1Nos Specification : Capacity : 600T, Year : 1974, Model No. : E4S600 Point Size : 4, Stroke : 750mm, Stroke per Minute : 15spm, Die Height : 1620mm, Slide Adjustment : 400mm, Slide Size : 3400*2000mm, Bolster Size : 3400*2000mm, Thickness of Bolster : 300mm, Main Motor Capacity : 95kw*4p With Die Cushion Die Cushion capacity: 120T Stroke: 300mm, Bolster Area: 2930*1310mm
JAPAN
151598 SIMPAC DE2P-1200t, DF2P-600t,DF2P-300t (2 Unit), N/A N/A
TECH CAPACITY : 1200T
Tandem Line - SIMPAC, DE2P-1200t (1 Unit) , SANGYONG,DF2P-600t (1 Unit),DF2P-300t (2 Unit),1.SPEC DETAILS(SIMPAC, DE2P-1200, 1 Unit  ) - Capacity: 1200T, Stroke: 600 mm, SPM: 10-20, Die Height: 1200 mm,Slide Adjustment: 600 mm, Slide Area: 2800 mm * 1600 mm,   Bolster Area: 2800 mm * 1600 mm * 250 mm,  Main Motor: 135 * 4(D-C)  kw. With Die Cushion:- Capacity: 150 Ton, Stroke : 300 mm. 2.SPEC DETAILS(SANGYONG, DF2P-600, 1 Unit  ) - Capacity: 600T, Stroke: 600 mm, SPM: 10-20, Die Height: 1200 mm,Slide Adjustment: 600 mm, Slide Area: 2500 mm * 1600 mm,   Bolster Area: 2500 mm * 1600 mm * 250 mm,  Main Motor: 90 *DC  kw. With Die Cushion:- Capacity: 100 Ton, Stroke : 250 mm. 3.SPEC DETAILS(SANGYONG, DF2P-300, 2 Unit  ) - Capacity: 300T, Stroke: 600 mm, SPM: 10-20, Die Height: 1200 mm,Slide Adjustment: 600 mm, Slide Area: 2500 mm * 1600 mm,   Bolster Area: 2500 mm * 1600 mm * 220 mm,  Main Motor: 75 *4 DC  kw. With Die Cushion:- Capacity: 40* 2=80 Ton, Stroke : 250 mm.
JAPAN
151316 KOMATSU E4S600-MB & E4S400-MBC N/A N/A
TECH CAPACITY : 600T
Tandem Line - E4S600-MB(1 Unit) & E4S400-MBC(3 Unit), SPEC DETAILS(E4S600-MB) - Capacity: 600 T, Stroke: 750 mm, SPM: 14 & 21, Die Height: 1620 mm, Bolster Area: 3400 mm * 2000 mm * 300 mm, Slide Area: 3400 mm * 2000 mm, Slide Adjustment: 400 mm, Main Motor: 95/63 kw. With Die Cushion:- Capacity: 120 Ton, Stroke: 300 mm. SPEC DETAILS(E4S400-MBC) - (3 Unit) - Capacity: 400 T, Stroke: 500 mm, SPM: 20 & 13.5, Die Height: 1420 mm, Bolster Area: 2500 mm * 1700 mm * 230 mm, Slide Area: 2500 mm * 1700 mm, Slide Adjustment: 500 mm, Main Motor: 55/37 kw. With Die Cushion:- Capacity: 80 Ton, Stroke: 250 mm.
JAPAN
151240 KOMATSU E2Q-500/E2P-300 1991 N/A
TECH CAPACITY : 500T
Tandem Line - E2Q-500(1 Unit) & E2P-300(3 Unit), YOM: 1991, SPEC DETAILS(E2Q-500) - Capacity: 500 T, Stroke: 710 mm, SPM: 12 ~ 22, Die Height: 1000 mm, Bolster Area: 2500 mm * 1700 mm * 200 mm, Slide Area: 2500 mm * 1600 mm, Slide Adjustment: 400 mm, Main Motor: 75 kw. SPEC DETAILS(E2P-300) - Capacity: 300 T, Stroke: 450 mm, SPM: 15 ~ 25, Die Height: 840 mm, Bolster Area: 2500 mm * 1500 mm * 180 mm, Slide Area: 2500 mm * 1500 mm, Slide Adjustment: 350 mm, Main Motor: 37 kw.
JAPAN
« Previous 1 Next » Show All Page: 1 of 1
23 Stock(s) Found!
8