TECH CAPACITY : 100Ø

Inner Segment Outer Dia : 460mm, Inner Segment effective width : 570mm, External Mouth – Diameter : 460mm, Side roll effective width : 210mm, Interval adjustment : 6mm, Number of wheel rotations : 65 rpm, Double rotation power : 2800Kgm Material Dimensions : 75mm angle Air Pressure : 5~7kg/cm1 Machine Weight : 9.5T Manipulator Type : RAF-46 Type 4 pass all automatic manipulator Stroke Length : 600mm, Transverse pitch : 70~130mm,(can be set at 1mm pitch) Cycle Time : 60 Roll Body and mechanical movement Lateral devastation : AC Servo System Measure before chuck : 100mm, Siding : Collection pump method Chuck type : 2 clawed chucks Lateral Movement : 11KW Servo Material Supply : Hydraulic cylinder Product discharge chute : sloping down chute Air Pressure : 4.5~5.5kg Machine Weight : 5.5T

Japan

TECH CAPACITY : 125Ø

Forging Roll-SPEC:- Outer Dia of Roll: ⌀ 460 mm, Inner Dia of Roll: ⌀ 280 mm, Width of Roll: Max 580 mm, Distance between Roll Shaft: 456 ~ 466 mm, Adjust of Roll Distance: 10 mm, Roll Rotation Speed: 55 RPM, Material Forging Force: ⌀ 85 mm, Main Motor: 22 KW * 4P Totally Closed FAN, Air Pressure: 5 Kg/cm3, Machine Weight: 14 Ton Manipulator-SPEC:- Material Feeding Capacity: ⌀ 85 mm, No.of process: Max. 8 Stage, Arm Shaft Stroke: 600 mm, Cross Feed Stroke: 350 mm, Main Drive System: Mechanical Drive, Hydraulic Pump: 80 kg/cm3, 87 L/min, Oil Tank: 300 L, Motor for Hydraulic Unit: 15 KW * 4p Totally Closed FAN, Machine Weight: 5 Ton.

JAPAN

TECH CAPACITY : 250Ø

Mode of Operation: Mechanical, Die Diameter: 895.35 mm, Die Width: 304.8 mm, Roll Neck Diameter: 406.4 mm, Roll Speed RPM: 25, Maximum Usable Periphery: 2082.8 mm, Roll Adjustment: 19.05 mm, Driving Power: 185KW * 6p, Fllor Space(L to R, F to B): 3100.8 mm * 3596.3 mm, Height: 3933.4 mm, ROLLER CONVEYOR - Manufacture: VORONEZH, Capacity: 200 kg, Arm Movement Stroke: 3000 mm, Arm Movement Speed: 0.7 m/s, Arm Movement Precision: 2 mm, Gantry Movement Stroke: Control Program, Gantry Movement Speed: 1.25 m/s, Gantry Movement Precision: 3mm, Clamp Rotation Turning: 0� , 45�, 90�, Clamp Rotation Turning Time: 1.5 sec, Clamp rotation Precision: 1�

JAPAN

TECH CAPACITY : 150Ø

Roll outer dimension: 560mm, minimum dia:50mm, maximum dia:150mm, Effective roll width: Inner roll:630mm,Outer roll:270mm, Maximum work length:Inner roll:870mm, outer roll:1340mm, distance between roll axis:560~568,Adjustment :8mm, phase adjustment:6degree, maximum steel block size:100degree, roll R.P.M:50, Air source pure dry air:4.5~6.5 kg, power supply:200V, control circuit motor:100V, one unit main power supply:30Kwx1000rpm 200V

JAPAN

TECH CAPACITY : 6000mm

Outside Diameter of Finished Ring: 1,200 ~ 6,300 mm Height of Finished Ring: 80 ~ 1,000 mm Inside Diameter of Ring Blank for Mandrel Diameter: ￠300mm min. 320 mm Height of Ring Blank: max. 1,050 mm Ring Weight max. :approx. 12,000 Kg Radial Rolling Force :max. 300 Ton Main Roll Diameter: ￠1,200 mm Rolling Speed max. :approx. 1.7 m/sec Horizontal Stroke of Mandrel: 1,000 mm Axial Rolling Force: 250 Ton Length of Taper Theoretical :1,400 mm Taper Cone Angle :35˚ Horizontal Stroke of Axial Roll Stand: 5,700 mm Vertical Stroke of Upper Axial Roll: 1,050 mm Max Distance Between the Axial Roll: 1,120 mm Main Roll Driving Motor: DC710Kw×570Volt Axial Roll Driving Motor: DC710Kw×570Volt Hydraulic Main Pump Motor: 4sets-90Kw×440Volt×60Hz Cooling Circulation Motor 2 sets-3.7Kw×440Volt×60Hz Hydraulic Pump: 4sets-A4V-180 (REXROTH) Max Total Flow :720 Litter/min Operation Pressure: 210 Kg/㎠ Grease Lubrication Unit :2 sets

TECH CAPACITY : 1000mm

Dia : 1,120 mm, Height:225 mm, Type :RAW 40/25-900/225 (Upgraded 2019), Radial:40 tonnes, Axial:25 tonnes, Min dia:200 mm, Min Ring Height:40 mm, Radial Rolling Pressure parameters: Radial rolling pressure for mandrels I and II: 4 to 40 tonnes, Radial rolling pressure for mandrel III: 4 to 16 tonnes, Axial Rolling Pressure parameters: Axial rolling pressure for characteristic circles K 1 and K 2: 2 to 25 tonnes, Axial rolling pressure for characteristic circles K 3: 2 to 20 tonnes, Axial rolling pressure for characteristic circles K 4: 2 to 16 tonnes, Outside diameter of Mandrels: Diameter of mandrel I: 120mm (4.72"), Diameter of mandrel II: 95mm (3.74"), Diameter of mandrel III: 70mm (2.76"), Inside diameter of Mandrels: Diameter of mandrel I: 130mm (5.12"), Diameter of mandrel II: 100mm (3.94"), Diameter of mandrel III: 75mm (2.95"), Max outside diameter of Blank: 475mm (18.70"), Max area of Ring Face: 264 sq. inches, Max Axial width of ring: 225mm (8.86"), Min Axial width of Ring: 40mm (1.57"), Approx Max outside diameter of ring: 1,120mm (44.1"), Approx Min outside diameter of ring: 230mm (9.06"), Approx Min outside diameter of ring w/Mandrel II & for a Min final wall thickness: 9.9mm (0.39"), Travel of Mandrel Carriage: 560mm (22.05"), Nominal rolling speed: 1.3 mtrs/sec (49.21 in/sec), Nominal powers required: For Radial drive: 80kW (107hp), For Axial drive: 32kW (43hp)

TECH CAPACITY : 5000mm

2) Ring Rolling Year : 2007 Dia : 1000 ~ 5000mm, Height of Ring : 80 ~1000mm, Mandrel dia : 300mm, Rolling Force : Max.300T, Rolling Speed : 1.7m/s, Main roll Dia : 1100mm, Horizontal Stroke of Mandrel : 1000mm, Vertical Stand - rolling Force : Max.250t Distance between the tapper rolls : 1060mm, Hydraulic pump : 75kw*4 sets, Oil cooler AC Motor : 3.7kw*2 sets

TECH CAPACITY : 1500mm

Dia: 1500 mm, RPM: 30