Stocks List

« Previous 1 2 3 4 Next » Show All Showing 1 - 25 Records 81 Stock(s) Found!

GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CONVENTIONAL       TYPE : HORIZONTAL MILLER
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
151800 HITACHI SEIKI 3ML-P N/A N-4207
TECH CAPACITY : T:1400 x 700
Horizontal Milling Machine, Spindle Speed : (30-1500) RPM x axis : 1400 mm y axis : 400 mm z axis : 600 mm Table Size : 1400*700 mm Motor Power : 7.5 KW Operating Volt : 400 V
India
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CONVENTIONAL       TYPE : SURFACE GRINDING
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
151962 OKAMOTO PSG-63DX 1997 13583
TECH CAPACITY : T:300x600
Magnetic Table : 600 x 300mm, Wheel Dia : 355/305 OD x 127 ID x38thick mm,Spindle speed : 1500/1800mm , Motor : 3.7 Kw, with Magnetic Separator,Dust Collector and Coolant System.Also 2 axis Digital, Micro Feed Handle.
INDIA
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CONVENTIONAL       TYPE : CENTERLESS GRINDER
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
152241 NISSIN HI-GRIND2 2010 N/A
TECH CAPACITY : φ:610x205mm
Many accessories such as Magsepa High-end product Grindstone rotation speed inverter With separate work loader type before and after the main body (Although it is a single unit separate interlocking specification, it can be easily separated when not in use and the main body is a normal specification as a general-purpose machine)
JAPAN
152240 NISSIN HI-GRIND-1-D 1990 N/A
TECH CAPACITY : φ:510x50mm
Through type Whetstone dimensions: φ455 * 150, Capacity : φ1 ~ ?75, Grindstone hydraulic bearing Adjusting vehicle hydraulic pressure bearing Adjustment car table slide static pressure guidance Lead screw Ball screw Coolant paper filter type.
JAPAN
152239 NISSIN GR200-45N 1991 N/A
TECH CAPACITY : ?:510X205MM
Whetstone dimensions: 510 * 205 Whetstone shaft Adjustable axle co-static pressure Coolant device (with magsepa)
JAPAN
152238 NISSIN GR200-45N 2010 N/A
TECH CAPACITY : Φ:510X205MM
Grinding capacity: ?1.5-110mm Grinding wheel: ?510 * 205 * ?30 4.8mm Peripheral speed: 2000m / min Adjusting whetstone: ?255 * 205 * ?127mm 18-200 rpm (60 Hz) Infeed
JAPAN
152237 NISSIN ECOGRIND-100R 2005 N/A
TECH CAPACITY : ?:250X150MM
Fines supply device (with FP straight feeder), Sulfeed grinding table for fines, supply pipe receiver / discharge shooter, grinding fluid purification device magnet separator (40 liters), reversing device and hanger for replacing both grindstones, water shield cover
JAPAN
152236 NISSEI MG16 1992 N/A
TECH CAPACITY : φ:455x150mm
2008 Manufacturer overhaul Grinding capacity: ?1-60mm Grinding wheel: ?405 * 150mm Adjusting whetstone: ?230 * 150mm 1450rpm
JAPAN
152235 MICRON MD-600?-15D 1995 N/A
TECH CAPACITY : φ:610x305mm
2021 OH finished Processing diameter: ?3-100mm Grinding wheel: ?610 * 305 * 304.8mm Adjusting whetstone: ?330 * 305 * 203.2mm Turning angle: (Feed angle) -1
JAPAN
152234 MICRON MD-450A 1984 N/A
TECH CAPACITY : ?:455x150mm
Through feed Whetstone diameter: 455 * 150 Coolant device (Spiclon type) Diamond wheel Jib crane
JAPAN
152233 MICRON MD-450-SP 1984 N/A
TECH CAPACITY : ?:455x150mm
* O / H at the manufacturer in 2005 Workpiece ??Diameter ?1mm ? ?50mm ??Maximum grinding length (in feed) 150 mm Grinding wheel ??Dimensions: Outer diameter ?455 * Width 150 * Inner ?228.6mm ??Peripheral speed 2400m / min Maximum peripheral speed 2700m / min Adjusting whetstone ??Dimensions: Outer diameter ?230 * Width 150 * Inner ?101.6mm ??Rotation speed 23-200 rpm (continuously variable transmission) motor ??Grinding wheel: Standard / 7.5kw Maximum / 15kw Adjusting wheel 0.75kw Hydraulic pump 0.4kw ??Grinding liquid pump 0.15kw pump ??Hydraulic: Type / Vane pump capacity 3L / min ??Grinding liquid: Type / External fan type Capacity 80L / min Lubrication ??Sliding surface: Manual lever pump Grindstone shaft: Grease worm gear: Oil bath Turning angle ??Adjusted vehicle feed angle + 6
JAPAN
152232 KOYO VAN3C 1983 N/A
TECH CAPACITY : ?:610x205mm
Whetstone: ?610 * 205mm Through feed No separator and coolant tank
JAPAN
152231 TOSHIN TECHNICAL Sigma-18 1997 N/A
TECH CAPACITY : φ:455x150mm
Whetstone dimensions: ?455 * 150 * ?228.6 (outer diameter * width * inner diameter) Grindstone peripheral speed: 2400m / min Adjustable vehicle dimensions: ?305 * 150 * ?177.8 (outer diameter * width * inner diameter)
JAPAN
152230 NTC CLG-1V-CNC 1990 N/A
TECH CAPACITY : φ:610x52mm
Whetstone: 610 x 52 x 304.8mm, Processing diameter: 1-50mm, Rated Voltage : 200V, No load rotation speed : 1400 rpm, Grinding wheel dia : 610mm, Grinding wheel thickness : 52mm, Grinding wheel hole dia : 304.8mm.
JAPAN
152229 NISSAN Hygra 2 2007 N/A
TECH CAPACITY : ?:610X220mm
Whetstone 610-220 Stop polishing product Both center holders move up and down
JAPAN
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CONVENTIONAL       TYPE : DRILLING MACHINE
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
151787 NAGAHAMA KRTG-420 N/A N/A
TECH CAPACITY : 19mm
SWING : 420 , DRILLING CAPACITY S45C : 4 *19 , DRILLING CAPACITY - FC200 : 4 *23 , MAX. DISTANCE SPINDLE TO TABLE : 485 , MAX. DISTANCE SPINDLE TO BASE : 720 , UP-AND-DOWN MOTION OF SPINDLE : 120, SPINDLE TAPER : MT 3 , DIA. OF COLUMN : 100 , SIZE OF A TABLE : 370 , SPINDLE SPEED : 50 , POWER SUPPLY : 380 , DRIVE MOTOR : 0.75kW 6P , TYPE OF V-BELT : A-34?A-27 , MACHINE TOTAL HEIGHT :1279 , NET WEIGHT : 130 , DIMENSION OF BASE : 340 * 600 , UP-AND-DOWN MOTION OF TABLE : 425
India
151786 IKK Radial Drill N/A 2859
TECH CAPACITY : 25mm
Drilling Capacity : 25 mm (1 Inch) Spindle Travel : 170 mm Spindle Speed First Range : (250-700) Rpm Second Range : (600-1800) Rpm Spindle Center to Column Distance Min : 200 mm Max : 890 mm Spindle Motor Power : 1.1 Kw Operating Voltage : 400 V Holder Type : Taper Shank Table size : 500 mm * 600 mm
India
151785 IKEGAI Radial Drill N/A N/A
TECH CAPACITY : 25mm
Drilling Capacity : 25 mm (1 Inch) Spindle Travel : 120 mm Spindle Speed First Range : (140-400) Rpm Second Range : (300-1000) Rpm Spindle Center to Column Distance Min : 190 mm Max : 570 mm Spindle Motor Power : 1.1 Kw Operating Voltage : 400 V Holder Type : Taper Shank Table size : 390 * 1145 mm
India
151784 IKEGAI Radial Drill N/A N/A
TECH CAPACITY : 25mm
Drilling Capacity : 25 mm (1 Inch) Spindle Travel : 170 mm Spindle Speed First Range : (140-400) Rpm Second Range : (300-1000) Rpm Spindle Center to Column Distance Min : 190 mm Max : 880 mm Spindle Motor Power : 1.1 Kw Operating Voltage : 400 V Holder Type : Taper Shank Table size : 390 * 1145 mm
India
GENERAL CATEGORY : INDUSTRAIL MACHINERY CATEGORY : TOOL ROOM MACHINE SUB CATEGORY : CNC GRINDING MACHINE       TYPE : CNC SURFACE GRINDER
PHOTO
STOCK NO
MAKE
MODEL
YEAR
SERIAL NO
SPECIFICATION & CONDITION
PRICE (JPY)
LOCATION
152930 HITACHI SEIKO GHL-B409N 1988 N/A
TECH CAPACITY : φ:900x400
Chuck work surface : 900x400mm, Table left/right movement amount : 1050mm, Column longitudinal movement : 440mm, Grinding wheel spindle overhead vertical movement : 325mm, Distance between the center of the grinding wheel shaft and the top of the table : 175-500mm.
JAPAN
152929 OKAMOTO PSG-125B 1985 N/A
TECH CAPACITY : φ:500x1200
Table size : 1200 x 500mm, Width x height x length : 1200 x 600 x 500mm, Movement of table left and right : 1300mm, Movement of table front and back : 530mm, Top of the table : 850mm, Chuck dia : 600 x 500mm, Grinding wheel dia (dia x width x hole dia) : 510 x 50 x 127mm, Weight : 6500 kg.
JAPAN
152787 OKAMOTO PSG-157 1981 N/A
TECH CAPACITY : Φ:700X1500
Table : 1500 x 700mm,
JAPAN
152786 OKAMOTO PSG-208DX 1992 N/A
TECH CAPACITY : Φ:800X2050
Table size : 2050 x 800mm, Processing range (length x width x height): 2000 x 800 x 695mm, Stroke : Front/rear 860 x Left/right 2250mm, Grindstone: Outer diameter : 510 x 50mm, Inner diameter : 127mm.
JAPAN
152766 OKAMOTO PSG-205DX 1989 N/A
TECH CAPACITY : Φ:2000X500
Table size : 2050 x 500mm, Machining range of workpieces : 2000 x 500 x 595mm.
JAPAN
152337 OKAMOTO PSG-408DXNC 2006 N/A
TECH CAPACITY : φ:4000x800
Machining range of workpieces:4000*800*800 Table:4050*800 chuck dimensions:4000*800*100 Loading weight:3728kg T-groove width*number:20mm*3 S:4250*800*860 Whetstone:?510*100*?203.2 (50/60Hz)1000/1200rpm,SIZE : W11*D4.5*H3.78m, WEIGHT : 30T
JAPAN
« Previous 1 2 3 4 Next » Show All Page: 1 of 4
81 Stock(s) Found!
8