Control device : MELDAS 330HM, Table size : 3000 x 5000mm, Spindle speed : 20~3200rpm, Spindle output : 15kw/140 rpm, Travel amount of each axis : (X,Z,Y,W) : 6500,4000,1000,1200MM, Main shaft dia : 110mm, Weight : 230kg.

Control device : FANUC series 31iA, Table size : 2000 x 4000mm, Size ram : 300 x 300mm, Spindle speed : 20~3200rpm, Spindle type : BT50, Ram tip size : dia 520mm, Main shaft dia : 130mm, Table size (width x length) : 1800 x 3400mm, Work weight : max 13 ton.

Control device : MELDAS 330HM, Table size : 2000 x 4000mm, Size ram : 300 x 300mm, Spindle speed : 20~3200rpm, Spindle type : BT50, Ram tip size : dia 520mm, Main shaft dia : 130mm, Table size (width x length) : 1800 x 3400mm, Work weight : max 13 ton.

Control device : MELDAS 330HM, Table size : 2000 x 4000mm, Size ram : 300 x 300mm, Spindle speed : 20~3200rpm, Spindle type : BT50, Ram tip size : dia 520mm, Main shaft dia : 130mm, Table size (width x length) : 1800 x 3400mm, Work weight : max 13 ton.

OSP-E100M, BBT50, ATC100, S:5000*3700*1000mm, (absolute scale) W:1300mm/3m/min (absolute scale), Table size : 3800*2500, 10~6000rpm, Extension head: MAX6000rpm, Speed-up extension head: 5000~10000rpm/5° indexing, 90° angular head: MAX3000rpm/5° indexing, Super-NURBS (Type B) Memory/Buffer: 4096KB/2048K.

OSP-P200M, Table size : 2000*6500mm, 4000Rpm, ATC-50, AAC-2st, 90° angular head (3000Rpm, 5° indexing), Cutting time approximately 950 hours.

Table size : 2000 x 4000mm, Distance between columns : 2150 to 3650mm, Spindle speed : 10,000mm, Motor : 26/22 kW.

OSP-5020, BT5024 ATC, Table size : 1300 x 2700mm, Spindle speed : 30~2000rpm.

Tosnuc-888,BT50,24 ATC, Table size : 1800 x 1400, Spindle speed : 8000rpm, Max. part weight : 19963.7 kg, Number of tool pockets : 24 , Spindle taper : 50, Axis X : 1400mm, Axis Y : 2100mm, Axis Z : 715mm, Maximum loading capacity : 10,000kg.

OSP-E100M,BBT50,100 ATC, Table size : 4800 x 3000mm, Spindle speed : 6000rpm,Stroke X5000Y4200Z1000mm, Elective gate width : 3550mm, Spindle dia : 85, Machine height : about 6,500.

Controller: OSP-5020M-G, Effective gate width : 2100mm, Distance from table top surface to spindle end: 450 to 1300 mm, Work surface size: 1500 x 3800 mm, Spindle speed : 30-4000rpm, angular attachment speed : 2000rpm.

50 ATC, OSP7000M, gate width : 2600mm, Distance from top of pallet to spindle end : 100-950mm,2 pallets, pallets: 2000*3700mm, Stroke(XYZ): 5000*3200*850, Spindle speed 3000rpm, Machine weight T : 70.

OSP5020M,BT50,50 ATC, Table size : 2000 x 3800mm, Rotation speed : 2000rpm, Surface size : 420 x 470mm.

FANUC-18i-MB, ATC-40, Effective column width : 2600mm, Table size : 2000×4000mm, S: X4250Y2900Z600W1100mm, Spindle speed: 40 to 6000.

GATE WIDTH : 3200,TABLE DIMENSIONS : 2500mm*12,000mm, 2APC #50,18-2,000 rpm, 80 PIECES F-15M, BODY WEIGHT 230t

Fanuc-16iM , T: 3000 * 6000 , S (XYZW): 6000 * 4400 * 1000 * 1950 , Column gate width: 2800mm , Distance from the top of the table to the bottom of the crossrail:2800mm , 80 ATC, Main spindle: MAS I type BT50 , Spindle speed: 20-3750min-1 , Scale feedback (XYZ axes) , Attachment automatic attachment / detachment device , Chip conveyor (hinge type) , Attachment automatic indexing angle: every 5 degrees , Tool life monitoring function , Tool breakage detection function , Work automatic measurement function, Measurement correction function ,1 extension milling head, 1 right angle head, 1 universal head

FANUC:15MA,TABLE:5500*49500,BT:50

Spindle speed: 8,000rpm, AAC: Universal head 1 ° / 1 °, Extension head 350mm, Angle head 90 ° / 1 °, ATC 50 pieces

OSP5020M, BT50, ATC 50, T: 2000 * 3800, 2000rpm

Fanuc 160i, T: 2000 * 3000, ATC80, BT50, Spindle speed: 40-8000, S: X axis 4200 * Y axis 3200 * Z axis 800, Column gate width: 2550

X-axis(table back forth):5500mm,Y-axis(spindle left-right)3400mm,Z-axis(Ram Updown):1000mm,Gate height(Table top to spindle end):Gate width(Maximum column space for work pass: 2600mm, Table size:2000x5000mm, Maximum work weight Plain table type:30000kg, Table T-groove size, Table-top:28mm, Spindle turn speed:30~4000min-1,no of spindle gear range:3, spindle taper hole(Spindle turning force(Maximum): Taper, Spindle Edge:120mm, Type:Ram type, Guide plane:4point cramp closed type, cross section size:380x380mm, fast feed speed:X=20,000, Y=20,000, Z=10000mm, W=1000mm, Tool feed speed:X=1~6000mm, Y=1~6000mm, Z=1~6000mm/min, tool shank type:MAS BT50, Pull stud type:MAS P50T-1(45degree)

TOSNUC800M BT50 ATC60 this table size 1800 * 4000 2 Palais spindle speed 3000rpm Gate width 2100 stroke: X4500 Y2900 Z1000 5 � indexing, Lot Number: G003608

TECH CAPACITY : T:2000 X 4000

Travel(XYZ):5000x3400x1000, Column height:1300mm,Distance between columns:260mm,Table:2200x4000, Table loading:15500kg, Spindle:30-3000rom,

Table size : 4000*13000mm,

Table size : 4000*12000,