TECH CAPACITY : Payload : 165kg

Capacity : 165kg, Reach : 2655mm, Power : 480 Volts; 3 Phase; 18 amps, Robot Weight : 1170kg, Controller Weight : 380kg.

TECH CAPACITY : Payload : 165kg

Capacity : 165kg, Reach : 2655mm, Power : 480 Volts; 3 Phase; 18 amps, Robot Weight : 1170kg, Controller Weight : 380kg.

TECH CAPACITY : Payload : 165kg

Capacity : 165kg, Reach : 2655mm, Power : 480 Volts; 3 Phase; 18 amps, Robot Weight : 1170kg, Controller Weight : 380kg.

TECH CAPACITY : Payload : 165kg

Capacity : 165kg, Reach : 2655mm, Power : 480 Volts; 3 Phase; 18 amps, Robot Weight : 1170kg, Controller Weight : 380kg.

TECH CAPACITY : Payload : 165kg

Capacity : 165kg, Reach : 2655mm, Power : 480 Volts; 3 Phase; 18 amps, Robot Weight : 1170kg, Controller Weight : 380kg.

TECH CAPACITY : Payload : 165kg

N/A

with robot Pulse YAG Oscillator: OYL-105P (500W) Maximum welding capacity: AL/1.0t SUS/2.0t No partition or surface plate

Handy type Oscillator: OYL-055P

CAPACITY : 2290 kva,Phase & Wire : 3Phase 4 Wire,Power Factor : 0.8 lagging,It's using time This generator. Only 159h.

Capacity : 300T, Stroke : 200mm, Stroke per Minute : 27~70spm, Die Height : 550mm, Stroke Adjustment : 100mm, Slide Size : 3200*1200mm, Bolster Size : 3200*1200mm, Motor : 37kW, With Coil Feeder

TECH CAPACITY : 1600T

Capacity : 1600t, With trimming press, Stroke : 40mm, Number Of Strokes : 45 spm, Die Height : 400mm, Bolster area : 750*700mm, Slide adjustment amount : 100mm, Main motor : 75kw 4p, Adjustment the motor :0.75kw 4p, Sudden stop time : 245 mm/sec, Maximum stop time : 265 mm/sec.

TECH CAPACITY : 1000T

Capacity : 1000t, with Trimming press.

Capacity : 2500T, Stroke : 350mm, Die space adjustment: 10mm,Bed dimensions :(left to right x front to back) : 1280 x 1400 mm, Slide dimensions : (left to right x front to back) :1090 x 1150 mm,Press Uprights Height: 1000mm, Width: 800mm.

Capacity : 4000 ton, Slide stroke : 380 mm, Frequency of the slide strokes per min : 55spm, Shut height : 1380 mm, Width of bed under guide lines : 1580 mm, Bed dimensions : 1520×1600 mm, Slider dimensions : 1450×1440 mm, Slider adjustment : 15 mm, Overall width of machine : 4440 mm, Overall depth of machine : 4656 mm, Overall height of machine : 8570 mm, Overall weight (net) : 245000 kg, Working voltage of main drive : 3×380 V, Frequency : 50 Hz, Overall used machine capacity : 200 kW.

TECH CAPACITY : 5000T

Capacity : 5000 ton, Stroke length : 330 mm, Die height : 1217 mm, Number of strokes : 45 spm, Number of real working strokes : 10, Ram ajustment : 15mm, Table (width x depth) : 1520 x 1950mm, Ram (width x depth) : 1465 x 1615mm, Frame opening width : 900mm, overfloor height approx : 6950mm, Table surface above floor : 392.5mm, Weight of press : 360ts, drive motor : 280kw, Motor speed : 1500rpm, Number of jectors, top an bottoms : 3, Ejector top : 25 ton mm, Ejector bottom : 75 ton, Ejector stroke : 30~110 mm, Clutch size 1400 w/toeque of : 245,000 mkg, Brake size K 1600 w/brake moment of : 1600mkg, Air consumption of clutch : 31 1/stroke, Air consumption of brake : 11 1/stroke, Cooling water consumption (brake,ram,layshaft) : 3 cube m/hour.

TECH CAPACITY : 200T

Capacity : 4000t, Number of strokes : 45spm, Stroke length : 406mm, Main shaft dia at Journals : 686mm, Main shaft dia at Eccentric : 1048mm, Width of Eccentric Bearing : 812mm, Shut height with top knockout plate : 984mm, Shut height without top knockout plate : 1092mm, Die seat (left to right x front to back) : 1568 x 1625mm, Ram face (left to right x front to back) : 1422 x 1346mm, Approximate net weight : 460,000Lbs.

Capacity : 2500t, Stroke : 360mm, Shut height : 1000mm, Number of stroke : 70spm, Slide Adj : 7 mm, Ram size (left to right x front to back) : 1400 x 1400 mm, Bed size (left to right x front to back) : 1500 x 1400 mm.

Capacity : 1600ton, Die Height : 770mm, Stroke length: 280 mm, number of Stroke per minute : 20 - 40spm, Slide dimensions (left to right x front to back) : 950mm x 900mm, Bolster dimensions (left to right x front to back) : 1050mm x 1350mm, Slide adjustment : 12mm, Main motor : 75 Kw.

Capacity : 1600ton, Die Height : 820mm, Stroke length: 280 mm, number of Stroke per minute : 60 - 80spm, Slide dimensions (left to right x front to back) : 920mm x 1000mm, Bolster dimensions (left to right x front to back) : 1050mm x 1200mm, Slide adjustment : 17mm, Main motor : 75 Kw.

S:220 60spm DH:680 B:820x950mmxT:150mm

Capacity: 630ton,Slide Stroke : 180mm/Max 36 SPM,Die Height : 600mm,Adjust Dimensions : 60mm,Bolster Dimension : 1100*780*120,Slide Dimensions : 1090*680,Bed Knockout (S/C) 60mm/40ton,Main Motor : 55kw,Machine weight : 45,000kg.

STROKE; 355 60 SPM DIE HEIGHT; 934 ADJUST; 10 BOLSTER ; 1450x900,WITH TRANSFER EQUIP. FEED; 260 LIFT; 150 CLAMP; 100 MATERIAL DIA; 40~70 mm PRODUCTS DIA; 170

CAPACITY : 200T, With die cushion.

Capacity: 4000T, Ram stroke: 400(+/- 1.0), Distance from table to ram upper shoe when ram is at bottom of stroke: 1200 mm, Ram to table adjustment range: 10 (+/- 0.2), upper knockout: Capacity: 8T, Stroke: 82 mm, Bottom Knockout: capacity: 12.5T, Stroke: 82 mm, Table dimensions (LR x FR): 1710 x 1620 mm, Ram dimensions (LR x FR): 1470 x 1100 mm, Dimensions of opening in press racks: Min height: 1100 mm, Min. width: 1100 mm, Press overall dimensions: LR: 6628 (+/- 50) mm, FR: 5700 (+/- 50) mm, Height above floor level: 7830 (+/- 80) mm, Press mass: 366583 (+/- 3%) kg, Compressed air consumption per ram stroke: 115 cu.dm, Air pressure in air-pressure system MPa(kgf/sq. cm): min - 0.5 (5), max - 0.7 (7), No. of electrical motors: 4, Main drive electric motors: Power: 160 kW, Speed: 975 rpm, Shut height adjustment mechanism electric motors: Power: 5 kW, Speed: 720 mm, oil lubricating station electric motors: Power: 1.1 kW, Speed: 1400 rpm, Grease lubricating station electric motors: Power: 0.4 kW, Speed: 1400 rpm

Capacity: 1600 Ton, Slide Stroke: 300 mm, No. of Stroke: 85 spm, Die Height: 660 mm, Slide Adjustment: 10 mm, Ram size : 860X910,Slide Size : 940X1200mm,Upper knock-out Stroke : 40mm,Force tonnage : 6.3mm,Lower knock-out Stroke : 32mm, Force tonnage : 10mm,Bet Dimensions: Left/right-1050mm ,front/back-1200mm, Slide Dimensions: Left/right-600 mm, Front/back-910mm ,Dimensions of ports in press arms : height/minimum : 710mm,width/minimum : 630mm Overall Dimension: Left/right-4850mm, Front/back-3515mm,Height of press above floor level:5570mm, Main Electric Motor: 90 kW, MACHINE WEIGHT : 120TON UNDER POWER.