Capacity: 800t, Stroke: 200mm SPM: 60, Die Height: 500mm, Bolster Size: 1100mm X 850mm, Slide Area: 1100*800mm, Slide Adjustment: 5mm, Main Motor: 37 Kw

Capacity: 2500 T, Stroke length: 300 mm, Stroke per minutes: 70 SPM, Die Height: 910 mm, Ram Adjustment: 10 mm, Table size (LRxFR): 1420 x 1400 mm, Ram size (LRxFR): 1350 x 1250 mm

Capacity: 400t, Stroke: 140mm SPM: 45, Die Height: 370mm Bolster Size: 480mm X 600mm Slide Area: 370*500mm Slide Adjustment: 15mm Main Motor: 30 Kw

CAPACITY : 1000TON

CAPACITY : 1600TON, STROKE; 280, 75 SPM, DIE HEIGHT :765, ADJUST; 10 BOLSTER SIZE; 1240X1140 SIDE OPEN SIZE; 920X920 WITH KNOCK OUT

CAPACITY : 1500 TON, STROKE; 250 DIE HEIGHT; 700 35 SPM ADJUST; 10 BOLSTER SIZE; 1100X1000 SIDE OPEN SIZE; 450X400 WITH KNOCK OUT ALUMINIUM, WARM, COLD, KNUCKLE, HOT FORGING

6000t HOT FORGING PRESS + 500t TRIMMING PRESS Make : National (U.S.A). YOM : 1967 Stop Year : 2020 Final maintenance year : 2019 Production : Crankshaft Stroke : 457.2mm SPM : 36 Shut height Max : 1143mm per min - Min1120.8mm Opening of front : 1828.8mm (LR) * 1143mm(H) Opening of side : 965.2mm(FR) * 1092.3mm (H) KO Stroke : upper 101.6mm, below 203.2mm ( Dimensions) : 6000mm (W) * 5664mm (L)* 9169mm (H) Weight : approx 520T Installation space of press : 6198mm ( LR)* 5232mm (FR) Installation space of total equipment approx : 13m*24m 500t Trimming Press ( one gear part is missing) Make : Natori (Japan) Stroke : 300mm SPM : 20 Die Height : 950mm ( in case of adjust up) Ram adjustment : 130mm Main motir : 50hp (3000v) Diemensions : 2500mm (W) * 2812 mm (L) * 770mm (H) Weight approx : 55 t

Capacity: 4000T, Ram stroke: 400(+/- 1.0), Distance from table to ram upper shoe when ram is at bottom of stroke: 1000 mm, Ram to table adjustment range: 10 (+/- 0.5), upper knockout: Capacity: 8T, Stroke: 65 mm, Bottom Knockout: capacity: 12.5T, Stroke: 65 mm, Table dimensions (LR x FR): 1710 x 1620 mm, Ram dimensions (LR x FR): 1420 x 1420 mm, Dimensions of opening in press racks: Min height: 1100 mm, Min. width: 1100 mm, Press overall dimensions: LR: 6228 (+/- 50) mm, FR: 5515 (+/- 50) mm, Height above floor level: 7790 (+/- 80) mm, Press mass: 361370 (+/- 3%) kg, Compressed air consumption per ram stroke: 115 cu.dm, Air pressure in air-pressure system MPa(kgf/sq. cm): min - 0.5 (5), max - 0.7 (7), No. of electrical motors: 4, Main drive electric motors: Power: 160 kW, Speed: 975 rpm, Shut height adjustment mechanism electric motors: Power: 5 kW, Speed: 720 mm, oil lubricating station electric motors: Power: 1.1 kW, Speed: 1400 rpm, Grease lubricating station electric motors: Power: 0.4 kW, Speed: 1400 rpm

Capacity: 2500T, Die height: 1020 mm, Stroke Length: 320 mm, Ram Adjustment: 16 mm, Strokes per minute: 20 - 40 mm, Bolster size: 1900 x 1080 mm, Slide size: 1200 x 780 mm, Main Motor: 200 kW AC440V

TECH CAPACITY : 500T

Capacity : 500t, With trimming press.

TECH CAPACITY : 300T

Capacity : 300ton, With trimming press.

TECH CAPACITY : 500T

Capacity : 500ton, With trimming press.

TECH CAPACITY : 1000T

Capacity : 1000ton, With trimming press.

TECH CAPACITY : 1000T

Capacity : 1000ton, With trimming press.

TECH CAPACITY : 1600T

Capacity : 1600t, Slide stroke : 300mm, Number stroke : 75 spm, with trimming press.

TECH CAPACITY : 2500T

Capacity : 2500 ton, Stroke : 320mm, RPM : 70 min-1, SPM : 24mm, Die height : 1100mm, Slide adjustment : height-22.5mm, Table area : 1380 x 1700mm, Slide area : 1360 x 1700mm, Drive motor : 132kw 8P, Table ejector stroke : 0-35mm, Top ejector stroke : 44mm, Clutch stroke : 2mm, Brake stroke : 2mm, Press speed : 44800mm/min, Press speed : 746mm/sec, Press speed : 7.5mm/0.1sec, Press strain : 2.5, Volume : 1300KW.

TECH CAPACITY : 1000T

Capacity : 1000t, Stroke length : 200mm, Number of strokes : 10-50 spm, Ram adjustment : 60mm, Die height : 880mm, Shut height : 1000mm, Bolster dimension (left to right x front to back) : 1600 x 840mm, Slide dimension (left to right x front to back) : 1600 x 840mm, Main motor : 110 kw.

Capacity : 400T, Stroke: 250 mm, Number of strokes: 40 spm, Die height: 700 mm, Bed Size : 1380*990mm, Slide Size : 1380*850mm.

CAPACITY : 1200T, Power (Lower dead Point): 1200T, permissive : Good Weight (Left, right, 100 MLC): 1200T, Stroke: 300, Slide Adjustment : 300mm, Lee Bottom : 850mm, Stroke Per Minute : 25spm, Number of Working Strokes per minute : 10 times, Die height: 850, Adjust: 300, Bolster: 2000x1600, Adaptor Area : 800*1600mm, Upper Knockout (Mechanical ) Power * Stroke : 7.5 T *50mm, With die cushion: 65ton, Pneumatic - 1 butt, 1 cylinder, in the upper limit of the ability : (maximum) - 35T, At the bottom : 65T, Main Electric Motors : 55KT*6P, Electric Motor for slide adjustment : 3.7KIT*4P, Use Air pressure CAS : 6, Electric : Source 200V*50Hz, Control Circuit : 100V*50HZ,

Capacity: 500T

Capacity: 1000T, Stroke length: 400 mm, No. of Strokes: approx. 16 spm, Shut height: 750 mm (from stroke down, adjust up to bed surface), Slide Adj: 120 mm, Bed size (RL*FB): 1100*1600 mm, Slide size (RL*FB): 800*1000 mm, Main motor: 200V.6P.75 HP, Adjust motor: 200V.4P.75 HP, Air pressure (Normal use): 5 kg/sq.cm, Ability limit: Max. ability 1000T is generated at 30 mm above stroke dead point

Capacity: 200 T, Stroke: 200 mm, SPM: 25, Die Height: 450 mm, Bolster Area: 1000 mm * 1000 mm, Slide Area: 470 mm * 450 mm, Slide Adjustment Area: 70 mm, Main Motor: 15 KW. (Ref.No-H0110)

Capacity: 630 Ton

Capacity : 440T, Load Curve : 6mm, Stroke Length : 300mm, SPM : 50, Slide Adjustment : 25, Slide Area : 1470* 840, Bolster Area : 1590 * 990, Main motor : 37kw

Note: DOUBLE CONNECTING ROD, Capacity: 150 ton, Stroke Per Minute: 35(SPM),Stroke length: 200 mm,Die height: 300 mm, Slide adjustment: 80 mm,Bolster size: 1340 x 600 mm, Slide area: 1280 x 400 mm