capacity:2500t, Slide:800mm,stroke per minute:9SPM, Die height:680mm, Bed size: 1200x1560mm, 110KWx2, 4KW

Capacity: 3000T

Capacity : 250 ton, 200Vlots,50HZ,110A

Capacity:800ton

TECH CAPACITY : 300T

Capacity : 300t, With trimming press.

Pressing force: 1000TON Daylight: 2300 Stroke: 1300 Table area: 2000X1500

Capacity: 10000T, Maximal force : 10,000 ton, First stage force : 4,000 ton, Second stage force : 6,000 ton, Third stage force : 10,000 ton, Working stroke : 2,500 mm, Free stroke speed : 0,3 m/sec, Loaded stroke speed : 0,07 m/sec, Table dimensions :11,200X4000X680 mm, Table mooving speed : 0,2 m/sec, Total weight approx : 2,290 ton

Capacity : 12000T, Bolster size : 6000*2500, Manipulator : 400T

Press type :oil hydraulic press 4 column push down Max forging force : 13,000t Internal size : 6.5*8.0m Manipulator: 450t- m

CAPACITY : 8000T,Press type :oil hydraulic press, 4 column push down, Max forging force : 10,500t Internal size : 5.15*7.5m Manipulator:240t- m

Capacity : 3000T, 2- pillar Hydraulic press, Internal size : 2900 x 3000mm.

CAPACITY: 1500 T, WITH MANIPULATOR 10 T 1) Hydraulic press 1500t Manufacturer: "HYDRAULIC", Duisburg, Germany Force - 1500t Stroke - 1600mm Number of strokes per min. - 4 Distances between columns - 1800 and 1450 mm Power - 300 Kw Press dimensions (LxWxH) - 3650x2750x9055 Press weight - 252t 2) Manipulator MK10-66L Year - 1971 Manufacturer - Plant of heavy forging and pressing equipment, Ryazan city, Russia. Lifting capacity, kN 100 Load moment, kN 250 The largest diameter of the pincers turning circle, mm 1900 Distance from the end of the jaws to the frame, mm 2245 Clamp opening range, mm 1480 ... 200 The smallest height of the trunk axis from the rail head, no more, mm 1225 The greatest parallel rise of the trunk, no more, mm 700 Angle of lateral rotation of the trunk around the vertical axis, degrees 360 Clamp rotation frequency, min-1 10.7 Manipulator movement speed, m / min 40 The speed of movement of the trunk in the vertical plane, m / min 1.9 Base, mm 4400 Track width, mm 4000 Manipulator dimensions, mm length 8435 width 1950 height from rail head 4225 Power, kW 30 Weight,45 t

Capacity(Ton) : 700, Stroke (mm) : 1100, Down speed(mm/min):　8000, UP speed(mm/min) :　9700, Press speed(mm/min):　1280, Dielight (mm) : 1600, Bolster Area (mm) : 1700*1200, Main Motor (kw)　: 45kw * 6P * 4

Capacity: 1000T, Stroke: 1500mm, Stroke Speed: 15 - 50 SPM, Daylight: 2500mm, Bed Size: 1260 x 2600mm, Main Motor: 250kw x 6P x 2, with 2ton Manupurator

TECH CAPACITY : Φ:28~130MM

Cutting range : dia 28~92mm, dia 28~130mm, Material length : 5~6,7m, Cutting length : 10~50mm, Hydraulic pump : 1.5kw-4p, Tank capacity : 10L, Chip remover : Brush type, Magazine loading width : 800mm, Material loading height : 1020mm, Maximum loading weight : 3800kg, Loading : Hydraulic Cylinder drive.

Capcity : 630t, Stroke : 270mm, Die Height : 606mm, Bolster Area : 1350 x 850mm.

Capacity : 800t, Stroke length : 400mm, Number of stroke : 15~30 spm, Bolster dimension (left and right x front and back) : 1040 x 1280mm, Slide dimension (left and right x front and back) : 1040 x 1280mm, Die height : 1200mm, Slide adjustment : 50mm, Main motor : 185kW, Maximum stop time : 285ms, Supply air pressure : 0.5MPa.

Capacity (T): 3000, Stroke (mm): 360, Slide Adjustment (mm): 10, Strokes Per Minutes (min): 21~60, Die Height (mm): 1000, Slide Area (mm): 1250 * 1170, Bolster Area (mm): 1350 * 1260, Main Motor (kw): 150 * 6, SLIDE KNOCKOUT- Capacity(t): 12, Pin Dia(mm): 60, Pin No: 2, BED KNOCKOUT - Capacity(T): 20, Pin Dia(mm): 80, Pin No: 3, DIE CUSHION - Capacity (T): 3000, Stroke(mm):　80, Pin Diameter(mm):　80, Pin no.(EA):　3, TRIMMING PRESS - Manufacture: KURIMOTO, Model: S2-300, Capacity (T): 300, Y.O.M : 1970 Stroke (mm): 250, Slide Adjustment (mm): 100, Strokes Per Minutes (min): 50, Die Height (mm): 650, Slide Area (mm): 1000 * 1100, Bolster Area (mm): 1100 * 1000, Main Motor (kw): 　 30 * 6, DIE CUSHION - Capacity (T): 30, Stroke(mm):　100,　 Pin no.(EA):　1

Capacity: 2500 T, Stroke: 320 mm, Strokes per minute: 65 SPM, Die Height: 879.5 ~ 886.5 mm, Ram Adjustment: 7 mm, Bolster Area: 1335 x 1400 mm, Adapter plate area: 1040 x 1100 mm, Bottom Knockout capacity: 12T x 2, Bottom Knockout stroke: 80 mm, Upper Knockout capacity: 5T, Upper Knockout Stroke: 40 mm, Main motor: 110 kW

capacity: 2500ton, In the year 1990 hot forging press is changed as warm forging press. Four stage Auto transfer press with Die holder and Induction heater,length of the stroke: 360mm, Stroke per minute: 15SPM, Ram adjustment: 10mm, Shut Height:876/890mm, Bolster area: 1340x1400mm, Slide size:1040 x 1100mm, Knock-out stroke: 100mm, Motor:110KW, Mass Weight:180ton. Induction heater : Make : Mitsubishi, Power: 600KW

TECH CAPACITY : 1000T

Capacity : 1000T, Sliding stroke: 400 mm Shut height: 1170 mm Die height: 920 mm Slide adjust dimension: 100 mm Number of strokes: 16-40 RPM Ball star dimensions: 1600 mm x 900 mm x 250 mm Slide dimensions: 1600 mm x 900 mm Dimension between columns: 1700 mm Opening again: 1400 mm   ● Transfer specifications Feed line height: 900 mm Feed stroke: 300 mm Clamp stroke: 40 mm Lift stroke: 3 mm

Capacity:1000ton, Stroke:240mm, Stroke per minute:100spm, DieHeight:650mm, Work stroke number:25, bed area: 900x1000 SL: 800x800

Capacity : 630t, Stroke length : 220mm, Number of stroke : 25~40spm, Die height : 500mm, Slide adjustment : 15mm, Slide dimension(left and right x front and back) : 700 x 600mm, Bolster dimension(left and right x front and back) : 800 x 700mm, Main motor : 45kw, Supply air pressure : 5kgf/cm square, Maximum stop time : 220ms.

TECH CAPACITY : 160T

Capacity: 600 T, Stroke: 148 mm, SPM: 40, Die Height: 540 mm, Bolster size: 630 mm * 900 mm * 120 mm, Slide size: 540 mm * 600 mm, Slide Adjustment: 50 mm, Motor : 37 Kw.

Capacity : 630mm, Stroke length : 220mm, SPM : 40spm, Die height : 500mm, Die adjustment : 15mm, Bolster area : 800 x 700mm, Slide area : 700 x 600mm, Main motor : 45kw, Voltage : 220V.