Capacity: 500 T, Stroke: 800 mm, Table Area: 2500 mm * 1800 mm

Max Capacity:　1200 T, Stroke:　1500 mm, Daylight(Max Opening):　2100 mm, Down Speed:　250 mm/sec, Pressing Speed:　25(less than 370T)~15mm/sec(600T), Auto change15mm/sec(1200T), Shut Height: 600mm, Up Speed:　250 mm/sec, Bolster Area:　2500mm x 2000mm(LR x FR), DIE CUSHION - Cushion Pad area: 2050 * 1560mm, Capacity:　140~700 (T), Cylinder no.: 175 T * 4ea, KNOCK OUT - Capacity: 50 T, Max Stroke: 650mm,

Capacity: 750T, Stroke: 900mm, Daylight:1700mm, Table : 3500 x 1500mm, Bed : 2000 x 1500mm

Capcity : 200t, Storke length : 100mm, Number of stroke : 50-100 spm, Die Height: 350mm, Slide Adjustment : 100mm, Bolster work surface height: 975mm, Bolster dimension (left to right x front to back x thickness): 1000 x 1000 x 140mm, Slide dimension (left to right x front to back) : 850 x 700mm.

Capacity : 300T , Stroke : 1100 , Open Height : 1600 ,Bolster : 1400* 1300Die cushion

capacity :200t, Stroke :100, spm : 50～100spm,Die Height :400, Adjustment :40, Side Adjustment:700*650, bloster size :700*650*200

Capacity: 500T, Stroke Length: 300mm, Stroke per Minute: 15~35spm, Die Height: 600mm, Slide Adjustment: 120mm, Bolster Size (Bed Size): 1200*1215mm Slide Size: 1200*1100mm With Uncoiler Model No. : LF6032WNCSP Plate Width: 70~600mm Plate Thickness: 2.3~8.0mm Coil Outer Diameter: 1500mm Coil Inner Diameter: 508mm Max Quantity Feed: 35 spm

Capacity: 500T, Stroke: 300mm, Stroke per Minute: 20~40spm, Die Height: 650mm, Slide Adjustment: 150mm, Slide Area: 1200*1100, Bolster Area: 1200*1200, Power generating position (on Bottom Dead Point):13mm

Hydraulic Press :1000T, Stroke : 600mm, Die Height :1000mm, Slide Size : 1500X1100mm, Bolster Size :1500X1200mm,

Capacity : 200T (Single crank), Stroke: 160mm, Stroke Per Minute :30spm, Die Height: 500mm, Slide Adjustment: 100mm, Bolster Area: 1000 * 1000mm

Capacity : 200T, Stroke: 250mm, Stroke per Minute :10-25spm, Die Height: 510mm, Bolster Area: 1500 * 1000mm, Slide Adjustment: 125mm, PAD: 635 * 685, Die cushion: 20T, With Auto Clamp

Capacity: 600T, Stroke: 350mm, Stroke per Minute: Max. 20spm, Die Height: 900mm, Slide Adjustment: 150mm, Slide size: 1200x1200mm, Bolster size: 1250x1220x210mm, Motor : 45 kw

Capacity: 500T, Stroke: 250 mm, Stroke per Minute :11spm, RPM: 20, Die Height: 550 mm, Bolster Size (Left & Right)*(Front & Back): 1300 mm * 1200 mm, Slide Size: (Left & Right)*(Front & Back): 1000 mm * 1000 mm, Main Motor: 55 KW 6P.

Capacity: 300T, Stroke: 250 mm, Stroke per Minute:37spm, Die Height: 550 mm, Bolster Size (Left & Right)*(Front & Back): 1200 mm * 1200 mm, Slide Size: (Left & Right)*(Front & Back): 800 mm * 1000 mm, Slide Adjustment: 150mm, Main Motor: 30 KW 4P.

Capacity:300T (Crank Motion) Stroke:300mm, Stroke per Minute : 20-30spm, Die Height : 520mm, Slide Size : 900x1100mm, Bolster Size :1100x1100mm

Capacity: 700ton, length of the stroke: 300mm, RPM: 25RPM, slide adjustment:200mm, die height:775mm, Bolster area:1000x1000mm, slide area:1000x1000mm

Capacity: 150 ton, PS-15, SPM : 60, DH : 480, BL : 800x800 mm, SL : 700x700 with die-cushion

Capacity : 800t, Daylight: 2000mm, Stroke length: 1600mm, Bolster dimensions: 3000 x 2000, Slide dimensions: 3000 x 2000, Allowable upper mold mass : 12t,Main hydraulic pump : 412/min, From the floor to the top of the bolster : 310mm, Oil tank capacity : 1500 lit, Total height above floor : 7200mm.

Acai hydraulic press 300 tons Pressurizing capacity 30-300 tons Pulling capacity 28 tons Maximum opening 1400mm Minimum opening 500mm Descent speed 300mm / sec Rise speed 300mm / sec Bolster area 2000 x 1500 mm Slide area 2000mm x 1500mm Stroke 900mm Traction motor 55 kw Tank capacity 800L Maximum oil pressure 275kg / cm3 Die cushion ??Capacity 20-150T ??Stroke 350mm ??Pad area 1550 mm x 1050 mm

CAPACITY:200T, BL:800*500

UNIT 1 - MAKE : HITACHI ZOSEN, MODEL : QP-55065, Capacity : 3000t, Stroke length : 500mm, Number of strokes : 12 spm, Slide adjustment : 400mm, Slide dimensions(left to right x front to back) : 2000×8000mm, Bolster dimensions(left to right x front to back) : 2000×8000mm, Bolster thickness : 300mm. UNIT 2 - MAKE : HITACHI ZOSEN, MODEL : QP-8981, Capacity : 2000t, Stroke length : 460mm, Number of strokes : 12 spm, Slide adjustment : 400mm, Slide dimensions(left to right x front to back) : 1980×7400mm, Bolster dimensions(left to right x front to back) : 1980×7400mm, Bolster thickness : 280mm. UNIT 3 - MAKE : HITACHI ZOSEN, MODEL : QP-423, Capacity : 2000t, Stroke length : 500mm, Number of strokes : 12 spm, Slide adjustment : 400mm, Slide dimensions(left to right x front to back) : 1980×7620mm, Bolster dimensions(left to right x front to back) : 1980×7620mm, Bolster thickness : 280mm.

UNIT 1 - MAKE : IHI, Capacity :2300t, Stroke length : 850mm, Number of stroke : 16 spm, Die height : 1400mm, Slide adjustment : 500mm. UNIT 2 - MAKE : IHI, Capacity :1000t, Stroke length : 650mm, Number of stroke : 20 spm, Die height : 1600mm, Slide adjustment : 650mm. UNIT 3 - MAKE : IHI, Capacity :1000t, Stroke length : 650mm, Number of stroke : 20 spm, Die height : 1600mm, Slide adjustment : 650mm. UNIT 4 - MAKE : IHI, Capacity :1000t, Stroke length : 650mm, Number of stroke : 20 spm, Die height : 1600mm, Slide adjustment : 650mm. UNIT 5 - MAKE : IHI, Capacity :1000t, Stroke length : 650mm, Number of stroke : 20 spm, Die height : 1600mm, Slide adjustment : 650mm.

UNIT 1 - MAKE : AMINO, Capacity : 1600t, UNIT 2 - MAKE : IHI, MODEL : SL4-1500-440-210, Capacity : 1500t, UNIT 3 - MAKE : IHI, MODEL : SL4-2300-450-220, Capacity : 2300t, UNIT 4 - MAKE : KOBE, Capacity : 1200t.

UNIT 1 - Capacity : 1000t, Inner : 800t, Outer : 600t, Lower slide : 450t, Bolster : 100 inches x 160 inches, Weight : 310t. UNIT 2 - MODEL : TF-41400-160-100, Capacity : 800t, Stroke length : 600mm, Number of stroke : 20spm, Slide adjustment : 450mm, Bolster dimension (left to right x front to back x thickness) : 3000 x 2000 x 270mm, Slide dimension (left to right x front to back) : 3000 x 2000mm.

UNIT 1 - MODEL : E4S800-MFC, Capacity : 800t, Stroke length : 600mm, Number of stroke : 20spm, Die height : 1350mm, Slide adjustment : 550mm, Bolster dimension (left to right x front to back x thickness) : 3000 x 2000 x 270mm, Slide dimension (left to right x front to back) : 3000 x 2000mm, Main motor : 132 Kw. UNIT 2 - MODEL : NC-S4-5, Capacity : 500t, Stroke length : 600mm, Number of stroke : 15 spm, Shut height : 1200mm, Slide adjustment : 450mm, Slide dimension (left to right x front to back) : 3000 x 2000mm, Bolster dimension (left to right x front to back x thickness) : 3000 x 2200 x 200mm, Die cushion stroke : 300mm, Cushion pad area(left to right x front to back) : 1600 x 1250 x 2mm. UNIT 3 - MODEL : NC-S4-5, Capacity : 500t, Stroke length : 600mm, Number of stroke : 12 spm, Shut height : 1200mm, Slide adjustment : 450mm, Slide dimension (left to right x front to back) : 3020 x 2200mm, Bolster dimension (left to right x front to back x thickness) : 2990 x 2200 x 200mm, Die cushion stroke : 300mm, Cushion pad area(left to right x front to back) : 1250 x 1800 x 2mm.