Capacity : 250T, Y.O.M :1980, Stroke (mm) :400, Slide Adjustment (mm) :100, Strokes Per Minutes (min) :15-30 , Die Height (mm) :700, Slide Area (mm) :3000*600, Bolster Area (mm) :3000*900, Main Motor (kw) :37. WITH TRIMMING PRESS : 80T

Capacity: 450 Ton, Stroke:340 mm, Stroke Per Minutes: 20 - 40, Die Height: 780 mm, Bolster Area: 2600 mm * 670 mm, Main Motor: 45 KW

capacity: 300ton,stroke length: 350mm, die height: 700mm,number of stages:10, stroke per minute:2.(20-40)3.(20-30), maximum drawing depth:2.(120)3.(180), slide adjustment: 100mm,slide area: 3000x1000mm, bolster area: 3000x1000mm

Pressure capacity : 200 KN, Stroke length : 30mm, SPM : 100~400mm, Die height : 240mm, Bolster : 650*285*130mm, Bed opening : 390*85mm, Motor : 2.2kW.

Capacity : 650ton, Stroke : 30 to 100mm, during operation, maximum slide stroke : 200mm, V-ring maximum stroke : 40mm, Pressure speed : 3~40t, Approach speed: 10~180mm, Maximum stroke number : 40spm, Bolster size(left and ringth x front and back) : 1150x1050mm, Feeding device Plate, thickness : 0.5 to 16mm, Plate width : 40~320mm, Scruff° cutter : 40ton.

Capacity : 500T , MAX.stroke : 280 , pressure : 236 kg/cm2 , open height : 600mm , shut height : 80mm

Capacity:250T, platepressure:20T, reversepressure:60T, maxclimb speed:180mm/sec, maxstroke:160mm suddenstoptime:180msec ,max downtime:200msec coilweight:3000kg , coil outerdia:1500m, coilinnerdia:508mm, feedamount:132mm, plate thickness:1.6~6.0mm, width:50~250mm, platethickness*platewidth:6.0*200mm, feedrate:22m/min, airpressure:5kgkm2, motorcapacity:0.4kw200v

Capacity : 630T, Total Force : 4000~6000kN, Shear Force : 1800~5850kN, Ring Indenter Force : 320~3200kN, Counter Force : 160~1600kN, Safety Distance : 173mm, Ram Slowing Down Path Max : 12mm, Ram Closing Speed : 120mm/s

Capacity: 500T, Stroke: 180 mm, Daylight: 500 mm, Max descending speed: 180 mm/sec, Motor: 75 kW 6P

Capacity : 800T, Stroke(mm) : 280 FEEDER SPEC: MAKER:DAEBONG, YOM :2010, Coil Width : 50-450mm, Coil Thickness :10t, Coil Weight :5000kg, Coil out-dia :1800mm, Coil in-dia :508mm, Feed length: DIGITAL SETTING, Main motor: 7kw, Mandrel expansion : EXPANSION, Pneumatic pressure : 5kg/㎠, Hydraulic pressure : 100kg/㎠（MAX）, Power source : 440V 　3-PHASE

Technical specs pressure: 630T, plate thickness: 16 mm, SLIDE: total force (nominal): 630, stroke min.: 30 mm , stroke: 150 mm, cutting velocity min.: 3 (mm/s), cutting velocity max.: 50 (mm/s), closing velocity: 120 (mm/s), returning velocity: 135 (mm/s), V-RING: nominal force: 320, stroke: 40 mm, COUNTER RAM: nominal force: 160, stroke: 40 mm, TOOL DIMENSIONS: lower table - width: 910 mm, lower table - depth: 1350 mm, upper table - width: 900 mm, upper table - depth: 900 mm, daylight max.: 410 mm, STRIP-FEEDER: feeder type: roll feeder: nominal force: 6000 kN, sheet width max: 450 mm, sheet thickness max: 16 mm, feeding step min.: 1 mm

Capacity : 200T, Stroke Length : 30mm, Number of stroke : 100-300spm, Die height : 560mm, Slide adjustment : 50mm, Slide dimensions (left to right x front to back) : 1700 x 650mm, Bolster dimensions (left to right x front to back) :1700 x 950mm, (square hole) with VS.

Capacity : 125T, Stroke Length : 31.75mm, Number of stroke : 0-700spm, Shut height : 508mm, Slide adjustment : 51mm, Bolster dimensions (left to right x front to back) :1219 x 819mm, Clutch Air Pressure for rated tonnage in pounds : 60.

Capacity : 200T, Stroke Length : 30mm, Number of stroke : 140-350spm, Die height : 440mm, Slide adjustment : 50mm, Slide dimensions (left to right x front to back) : 1700 x 650mm, Bolster dimensions (left to right x front to back) :1700 x 950mm, (square hole) with VS.

Capacity : 100T, Stroke Length : 80mm, Number of stroke : 0-100spm, Die height : 370mm, Slide Adjustment : 50mm, Slide Area:(left to right) : 1140 X 500mm, Bolster dimensions (left to right x front to back) : 1450 X600 X 115mm, Bed opening (front to back) : 750 x 250mm, Main Motor : 22kW 4P.

Capacity : 200T,Stroke Length : 200mm, Number of stroke : 40~160spm, Die height : 320mm, Slide Adjustment : 35mm, Bolster dimension (left to right) : 1810mm, Slide opening (front to back) : 170mm, Main Motor : 60hp.

CAPACITY : 200T,STROKE LENGTH : 200mm, NUMBER OF STROKE : 48~100spm, SLIDE ADJUSTMENT :100mm, SLIDE DIMENSION (LEFT to RIGHT,FRONT to BACK) : 1500*1100mm, BOLSTER DIMENSION (LEFT to RIGHT,FRONT to BACK) : 1500*900mm,DIE HEIGHT : 450mm, MAIN MOTOR : 50kw.NC LEVELER FEED , MAXIMUM FEED LENGTH : 500mm, ROLL LENGTH :420mm, COIL THICKNESS : 0.6~6.0mm, MAXIMUM COIL WIDTH : 400mm, MAXIMUM COIL OUTER DIA : 1500mm, SPINDLE MOTOR CAPACITY : 1.5KW, COIL WEIGHT MAX : 3000kg.

CAPACITY : 60T,Stroke of slide : 40MM,SPM : 180~380MM,Die height : 320MM,Adjustment of slide : 50MM,Slide area : 320*360MM,Bolster : 1080*470*145MM,Bed opening : 600*180MM,Stopping time : 260MS.

Capa : 1100KN .Stroke : 80mm .spm : 40 - 150 .Die height : 350mm .Slide : 1200 x 520mm .Bolster : 1200 x 550mm

Capacity : 80t, Stroke length : 25mm, Number of stroke : 600spm, Die Height : 245mm , Slide Adjustment : 50mm, Bolster size (L-R x F-B)L: 740 * 1050mm, Slide area (L-R x F-B) : 500 * 1050mm, Main Motor: 22kw.

Capacity : 80t, Stroke length : 25mm, Number of stroke : 600spm, Die Height : 245mm, Slide Adjustment : 50mm, Bolster size (L-R x F-B)L: 740 * 1050mm, Slide area (L-R x F-B) : 500 * 1050mm, Main Motor: 22kw.

Capacity : 125T, Stroke : 30, Spm : 120 ~ 300 spm , Die Height : 360 , Bolster : 1100 * 800

Capacity : 150T, Stroke : 250 , Spm : 50-120 spm , Die Height : 500 Bolster : 2000 * 800

CAPACITY :30T, STROKE : 30 SPM: 150-600spm ,DIE HEIGHT : 250, BLOSTER SIZE: 500 * 400 Oilmatic Feeder Sankyo VG25

CAPACITY : 40T, STROKE : 25, SPM :200-1000, DIE HEIGHT : 230, BLOSTER : 750 * 540 Feeder: VG25