Capacity : 45t, Stroke length : 120mm, Number of strokes : 80 spm, Die height : 270mm, Slide adjustment : 60mm, Slide dimensions (left to right x front to back) : 410 X 340mm, Bolster dimensions (left to right x front to back) : 810 X 440mm, Main motor : 3.7kW, Emergency stop time : 151 ms.

Capacity : 110t, Stroke length : 180mm, Number of strokes : 35-65 spm, Die height : 350mm, Slide adjustment : 90mm, Slide dimensions (left to right x front to back) : 600 X 520mm, Bolster dimensions (left to right x front to back) : 1080 X 680mm, Main motor : 7.5kW, Emergency stop time : 217 ms.

Capacity : 200t, Stroke length : 250mm, Number of strokes : 25-45 spm, Die height : 450mm, Slide adjustment : 120mm, Slide dimensions (left to right x front to back) : 880 X 650mm, Bolster dimensions (left to right x front to back x thickness) : 1450 X 840mm X 190mm, Emergency stop time : 200ms, Main motor : 15kW. LEVELER FEEDER - Coil : 300mm, Weight : 2000 kg, Motor for uncoiler : 1.5 kw.

Capacity: 110t Stroke: 110mm, Stroke per Minute : 100spm Die Height: 350mm, Slide Adjustment: 100mm, Slide Size: 620 * 530mm, Bolster Size: 1100 * 680 * 150mm

Capacity: 110t Stroke: 150mm, Stroke per Minute: 65spm Die Height: 350mm, Slide Adjustment: 100mm, Slide Size: 620 * 530mm, Bolster Size: 1100 * 680 * 150mm, Shank hole diameter: φ31

Pressure capacity : 2000KN, Stroke length : 250mm, No-load continuous stroke : 40spm, Die height : 460mm, Slide adjustment amount : 110mm, Slide dimensions (Left to right x front to back) : 1850×800mm, Bolster dimensions (Left to right x front to back) : 2150×840mm, Supply air pressure : 0.5MPa, Maximum suspended mass of upper mold : 1030kg, Sudden stop time : 160ms, Maximum stop time　Two-handed operation　ms - Light beam type : 180ms, Overrun monitoring position : 15°.

Capacity :150T,Stroke: 200,Number of strokes: 30~50,Die height: 450, Slide dimensions (left to right x front to back):1600X550mm, Bolster dimensions (left to right x front to back x thickness) :2000X760X140mm.

Pressure capacity: 110T,Stroke length: 180mm,Stroke number: 35-65spm,Die height: 400mm,Bolster:1880X680,Slide Surface: 1360X520.

Pressure capacity: 110T,Stroke length: 120mm,Stroke number: 35-65spm,Die height: 430mm,Slide adjustment amount: 90mm,Main motor: 11kW.

Capacity :160T,Stroke number: 30-55spm,Main motor :15kW,Air pressure used: 5 kgf, Sudden stop time :185ms,Maximum stop time Two-handed operation :185ms,Light beam type :205 ms, Overrun monitoring device setting position :12±3.

Capacity : 250T (Double crank) , Stroke length : 250mm , spm : 20~35spm , Die height : 500mm , Slide Adjustment : 120mm , Slide dimensions (left to right x front to back) :2700 X 700mm, Bolster dimensions (left to right x front to back) : 2700 x 760mm, Main Motor : 30kW.

Capacity : 250T (Double crank) , Stroke length : 170mm , spm : 25~60spm , Die height : 450mm , Slide Adjustment : 120mm , Slide dimensions (left to right x front to back) :2100 X 700mm, Bolster dimensions (left to right x front to back) : 2400 x 920mm, Main Motor : 30kW.

Capacity : 250T (Double crank) , Stroke length : 250mm , spm : 20~30spm , Die height : 525mm , Slide metering: 120mm , Slide dimensions (left to right x front to back) :2100 X 700mm, Bolster dimensions (left to right x front to back) : 2700 x 920mm, Main Motor : 30kW.

Capacity : 200T (Double crank) , Stroke length : 250mm , spm : 25~45spm , Die height : 500mm , Slide adjustment : 110mm , Main Motor : 22kW.

Capacity : 250T (Double crank) , Stroke length : 250mm , spm : 20~35spm , Die height : 525mm , Slide adjustment : 120mm , Main Motor : 30kW.

Capacity : 200T (Double crank) , Stroke length : 250mm , spm : 25~45spm , Die height : 500mm , Slide adjustment : 110mm , Motor : 22kw , with coil feeder

Capacity: 200t, Number of Stroke : 40-75spm, Stroke length: 150mm, Die Height : 450mm, Slide adjustment : 110mm, Slide dimension (left to right x front to back) : 1850*650mm, Bolster dimension (left to right x front to back) : 2400*700mm, Main motor: 15kw.

Capacity : 200t, Stroke length : 250mm, Number of strokes : 30-50 spm, Die height : 500mm, Slide adjustment : 120mm, Slide dimensions (left to right x front to back) : 1850×650mm, Bolster dimensions (left to right x front to back) : 2400×850mm.

Capacity: 250t, Stroke length : 280mm, Number of stroke : 20-35spm, Die height: 550mm, Slide adjustment : 120mm, Slide dimension (left to right x front to back) : 2100 x 700mm, Bolster dimension (left to right x front to back) : 2700 x 920mm, Main motor: 30kW.

Capacity : 2000kN,Tonnage Rating Point : 7mm,Stroke Length : 250mm,Continuous SPM (No Load) : 25 ~ 45spm,Die Height : 500mm,Slide Adjustment Range : 110mm,Slide Area (L.R. x F.B.) : 1850 x 650mm,Bolster Area (L.R. x F.B.) : 2420 x 840mm,Frame C Frame (b4 x h3) : 430 x 800mm,Frame Inner Dimension (a4) : 1926mm,Bolster Thickness : 170mm,Anchor Bolt Locations (a1 x b1) : 2080 (1980) x 1770mm,Installation Area (a2 x b2) : 2256 x 2225mm,Maximum Dimension(a3 x b3) : 2885 x 2340mm,Overall Height (h1) : 3725mm,Bolster Surface Height (h2) : 1000mm,Main Motor : 22 x 4kW x P,Main Breaker Capacity (380/415V, 50/60Hz) : 75A,Maximum Upper Die Weight : 1200kg,Approximate Press Weight : 27t,Required Air Pressure : 0.5MPa.

ST Length: 280mm ST Number: 20~35spm Die height: 550mm Slide adjustment: 120mm (electric)

Capacity : 250t, Stroke length : 300mm, Number of stroke : 15-30 spm, Die height : 550mm, Slide adjustment : 120mm, Slide dimension (left to right x front to back) : 2100 x 700mm, Bolster dimension (left to right x front to bacl x thickness) : 2700 x 950 x 190mm, Emergency stop time : 192ms.

S: 250 25-45spm DH: 500 Adj: 110 SL: 1850*650 B: 2420*850 (pin hole)

W crank press S: 250 25-45 spm DH: 500 Adj: 110 SL: 1850*650 B: 2620*840

Capacity : 250T, Stroke : 250m, SPM : 40, Die Height: 550, Slide Adjustment: 120, Bolster Area: 2700 * 950mm, Slide Area: 2100*700mm