Forming Station : 5 station, Capacity(T) : 200, Station : 5,Type of Knife : Open, Cutting Diameter(mm) : 23, Cutting Length(mm) : 12-50, Quill Size (Diameter): 75*100, Punch Size (Diameter) : 60*185, Dice Size (Diameter): 100*140, PKO Length(mm) : 23, KO Length (mm) : 40, Speed(SPM) : 80, Main Motor(kw) : 37, Power Supply(KVA) : 45, Machine mass(kg) : 32,000

Stations:5, Cutoff diameter:6~15mm, forging diameter maximum:19mm, cutting length:2~30mm,parts length (overall length):30mm, cutting method: Cylinderical die with pusher: Quill Diameter:4.5mm, Punch diameter:50,dice diameter:63.5mm, Common dia:1-45mm,Distance between dice center:75mm, capacity/Output:60~120Pcs/M, Knock out:23mm to 40mm,Altered to 40mm from 23mm, Knockout at punch side:14mm, ram stroke:150, Motor Power:18.5 4P 220V 60HZ, coolant motor:0.4KW 4P, machine weight:15,000 Kgs, Power capacity:30KVA

Forging Station : 6, Forging Dia: 15mm, Forging Bolt Size(M): M12, Open-up Dia : 20mm, Product Length:50mm, Forging load: 1200 KN, Cut-off Dia: 15mm, Cut-off Length:L/D=1/2~60 mm,Cut-off Knife Size:47x25mm, Cut-off quill Size:45x75mm,Punch Dia:55mm,Die Dia:65mm,Main Motor:30 kW(P),P.K.O stroke:30mm,K.O Stroke:60mm, Machine Dimensions :3000x5200x2000WLH

Wire material diameter: Φ15～Φ26, Number of stages: 3, Ram strokes : 200mm, Knife dimensions : 480 x 32T nn, Quill dimensions : 75 x 100L nn, Punch dimensions : dia 80 x 233 Lnn, Die diemensions : dia 150 x 220 Lnn, KO : 60mm, PKO : 35mm, Feeding speed: 16.0mm/min, Motor power: 45kw, 220V, 60Hz, Loading weight: 2,000kg, Coil inner dia : 800mm, Coil outer dia : 1500mm, Machine weight: 45,000kg

Cutting wire dia : 14(12)mm, Cutting length : 7mm~30mm, Heading dia : 15(14AF)mm, Target nut dia : 8M, Open upset dia : 22mm, Forging pressure : 800KN, Ram stroke : 120mm, Knife size(dia x T) : 47 * 18mm, Quill dia * length : 45 * 65 mm, punch dia*length : 50*135mm, Die diameter * length distance : 63.45*140mm, between dies : 75mm, PKO Length : L3C 15(23)mm, KO Volume : H23(40)mm, Crank pin dia : 210mm, Number of production : 120 pieces/min, M(60), Lubricant oil capacity : 250 L, Cooling oil capacity : 300 L, Motor output : 18.5(6)KW(P), Machine dimensions : 2.4 x 3.6 x 1.6 m(W X L X H), Machine weight : 15,000 kg, Power capacity : 25 KVA.

Stations : 4, Bolt : M24(41AF), Open Upset Dia :50mm, Under Neck Length : 30~160mm,Pressure : 400,Cutting Wire Dia : 25,Cutting Length : 40~220,Knife Dimensions (Medium)mm : 80*40(80*32),Quill Dia : (ø * L) 75*100,Dice Dimension: (ø * L) 140*240,Die Cores : 153/56,PKO(nn) : 30(40), KO : 20-170mm,Ram Stroke : 300mm,Crank Pin Dia : 450mm,Number of Parts Production : 80-130/minute, Motor : 110 Kw,Machanical Weight kg : 75,000,Lubricating Oil capacity(L) : 600,Cooling oil capacity(L) : 600, quill busher : 60, Lubricant pump : 1.5kw,Cooling oil : 1.5kw.The above specifications are for materials with a tensile strength of 65kgf/mm or less.KO (numbers are the maximum KO resistance and open chuck at the time of forging) Applies when used.Always check the design specifications before handling.

Forging station; 5, Forging pressure; 200 Ton, Open upset diameter; 35, Cutoff Dia.; 18, Cutoff Stroke; 450, Cutoff Length; 50~240, KO amount; 260, KO Adjust; Auto, PKO amount; 120, Knife dimensions;70 x 32L, Quill dimensions; 65 x 100L, Die Dimensions; #1,#5; 115 x 300L, #2,#4; 100 x 300L, #3; 130 x 300L, Punch Dimensions; 95 x 290, Die to Die; 126, Clamp feed length; 240, Speed; 50~70 rpm, Main Motor; 75kW, OP chuck system; Lever Knucle, Lubricant Capacity; 400 L Coolant Capacity; 600 L

Stations : 5, Bolt Former Input Dia : 23mm, Bolt Dia : 16mm, Open Upset Dia :32mm, Neck Length : 125mm, Forging Pressure : 260T, Cutting Wire Dia : 18 ~ 27mm(18~23.5), Cutting Length : d/2 ~190mm, Turn Amount : 40mm, Knife Dimensions : (ø * L) 80*32 Quill Dia : (ø * L) 75*100 Punch Dia : (ø * L) 80*233 Die Dia : (ø * L) 120,635*300 Die Cores : 138 P.K.O : 45 K. O : 50 Ram Stroke : 300mm, Crank Pin Dia : 295 Production (SPM) : 90, 76, 64 Motor : 75(6) Kw Machine Size : 3.5*5.3*2.1 Machine Weight : 50T Power Capacity : 100 Air Capacity: 4 Lubrication & Oil Capacity: 500 Lubrication & Oil Capacity : 600

Bolt, Nut & Parts Former DAIDO NS5-14PLX Make : Daido Type : Bolt, Nut & Parts former Model no : NS5-14PLX Max cut-off diameter : 28mm Forming dia : 18mm Max cut-off Length : 170mm Max product head dia (free upset) : 32*115mm Production capacity: 70-100 Cutting dice diameter: 70mm Forming dice diameter: 100mm Punch diameter: 70mm Distance between dice: 111mm Dice to length : 55mm Punch to length : 35mm Crank pin dia : 320mm Crank stroke : 300mm Machine heading capacity : 210t Machine weight : 42,000kg Main drive : 60hp 45kw Lubricantion motor: 1hp 0.75 kW Coolant motor: 1hp 0.75kw Chuck type : Multi Chuck Inversion length : 50mm

Forging load 3000kN,Stations:6,cut off dia:27mm,cut off length:190mm,stroke:145mm,max.production capacity :100ea/min main motor:90kw weight:65 ton

TECH CAPACITY : M40

CAPACITY: 230 TON,MAX. OUTR DIA. : 64, MAX O.D. FOR COMBI BLANKS: 55 , BAR DIA.; 19~40 , CUTTING WIDTH; 22~72 , WEIGHT OF pieces; 40~72 g ,MAIN RAM STROKE :160 ,WEIGHT : 35.8 TON

POWER ; 230 TON, MAX. BAR DIA. ; 40, MAX. PART OD; 64, MAX CUTOFF BLANK WEIGHT; 540g, MIN. MAX BLANK HEIGHT; 12~30, CUTTING LENGTH; 20~70, RAM STROKE; #1 ; 80 ,RAM STROKE; #2,3,4 ; 240, DIE INTER-CENTER CRANK PIN DIA.; 240, CRANK PIN DIA.; 360, EJECTOR STROKE; 40, PKO; 20, PRODUCTION RATE; 150 ppm, MAIN MOTOR POWER; 75 kW, MACHINE WEIGHT; 45 TON

4 Station, Product Diameter (Simplex Ring) : ⌀48mm ~ ⌀103.6mm, Product Diameter (Intermitent Heading) : ⌀103.6mm, Hieght of Product : 12 ~ 60mm, Heading power : 816 T, Material Diameter : 32~50mm, Cutting Length : 110mm, Cut Off Weight : 29.5 kg, Core Internal die : 250mm, No 2 & 3 Die Diameter : 235mm, PKO Length : 30-40mm (Changing Indivisual Cam), KO Length : 80mm, Ram Stroke : 300mm, Production Speed Per Minute : 45 ~`100mm, Main Motor : 180 Kw, Machine Dimensions : (W 5.0*L 7.0* H 3.0), Machine Weight : 150T, Air Pressure : 0.6Mpa, Air Consumption : 1.700 1/H, Cooling Water Pressure : 0.6Mpa, Cooling Water Volume : 1000(per Minute), Roll Height : 1700mm

TECH CAPACITY : M60

DIE(STATION): 4 Section, Capacity: 1200 Ton ,Max outer diameter of piece: 120 mm, Max. bar diameter: 65 mm, Length for cutting: 45-140 mm,Stroke of ram: 381 mm, Stroke of cutting arm: 254 mm, Stroke: 40-70 /min, Weight of piece: 0.4-3.1 kg, Height of the press: 3200 mm, Spare parts available are as follows: Electric engine 1 piece, Adjustment wedges 2 pieces, Superior pliers: 1 piece,Inferior pliers: 1 piece, Die mass clamping piston: 1 piece, Break belt: 1 piece, Weight: 180 Ton

?22 ~ 25 * 250mm,L 3600 x W2000 x H2700 mm,Machine weight T: 12t

Thread out Dia Meter (Min-Max): 5 - 75 mm, Max.Thread Length: 147 mm

HRD-M

Max. Rolling Pressure(KN) : 200, Max. Spindle Revolution(/min) : 75.

THI-12R

Thread dia: 16~22mm,Die pocket height : 75mm, Blank length : 150mm, Spindle speed/min : 20~40rpm, Run motor : 0.4KW.2P, Amount of oil : 160L, Coolant oil quantity : 250 L, Blank Length: 2d~150,Thread Length: 70 (MAX),Output pcs :30~150 pcs min,Size - Size – (mm) : L5~7m x W2m x H2.1m,Mechanical weight : 5,500kgs, Weight - Unit Weight – (t) : 5.5 tons.

16mm product size,Size - Size – (mm):L x W x H,Weight - Unit Weight – (t):3.5 tons,Thread rolling dis:Φ12~16mm,die pocket height:80mm,blank length:150mm,spindle speed/min:20~50,hopper motor:0.4~1.5KW.GM,coolant motor:0.4KW.2p,gear oil quantity:80L,coolant oil quantity:180L,machine weight:3,500kgs,installation areaL*W*H(mm):4~6*2*2.

"Thread rolling diameter: φ4 to 10mm Neck dimension: 80mm Production volume: 300 pieces/min Required horsepower: 9.5kw,Weight - Unit Weight – (t):2.0 tons"

TECH CAPACITY : T:150X450

Manual machine, no automatic feed (with grindstone head up / down fast forward), T: 450 * 150 (17mm T-groove * 1), S: 480 * 180, Maximum distance from the top of the table to the center of the grindstone shaft 550, Distance from floor to work surface 1055, Table left and right handle 1 rotation stroke 100, Front and rear handle 1 rotation stroke 4, Front and rear handle 1 scale stroke 0.02, Forward / backward fine movement handle 1 scale stroke 0.001, Up and down handle 1 rotation stroke 1 Up and down handle 1 scale stroke 0.005, Vertical fine movement handle 1 scale stroke 0.001, Vertical fast forward speed 500mm / min, Whetstone dimensions: outer diameter φ205 * width 6.5-25 * inner diameter φ31.75, Grindstone rotation speed 0-2850 rpm (with inverter), Motor: 1.5kw2P for grindstone shaft (optional), 0.1kw6P for vertical fast forward, 13w for lubrication pump, Table drive method: wire, Table slide surface: sliding surface (turkite) * Vertical / front / rear digital dust absorption / water injection device (paper filter) Currently without magnet chuck (standard chuck dimensions: 350 * 150 * 70 / maximum work weight 70 kg)

TECH CAPACITY : T:400X900

T: 900 * 400, S: 1050 * 440, Flat chuck 900 * 400, Wet, Whetstone: 305 * 32 * 76.2

Many accessories such as Magsepa High-end product Grindstone rotation speed inverter With separate work loader type before and after the main body (Although it is a single unit separate interlocking specification, it can be easily separated when not in use and the main body is a normal specification as a general-purpose machine)