Capacity :180t, Screw dia : 45mm, Total Shot : 4.88 million times

Capacity : 100t, Screw diameter: 36Φ

Capacity : 100t, Screw diameter : 22mm

Capacity : 110t, Screw diameter: Φ45, Total number of shots: 6,728,407, Operating time: 74,283h

Capacity : 110t, Screw diameter: Φ35,

Capacity : 140t, Screw diameter: Φ45,Total number of shots : 7,142,738, Operating time : 73,473h.

Capacity : 110t, Screw dia : 35mm, screw stroke : 140mm.

Capacity : 160t, Screw diameter : 40mm, Stroke : 450mm, Between tie bars (H * W) : 560 * 510mm, Die plate dimension (H * V) : 790 * 740mm.

Capacity : 160t, Screw diameter : 40mm, Stroke : 450mm, Between tie bars (H * W) : 560 * 510mm, Die plate dimension (H * V) : 790 * 740mm.

Capacity : 2500t,

CAPACITY : 850T

CAPACITY : 1050 T

CAPACITY : 350T

CAPACITY : 8,330(850),TIE BAR SPACING (H*V) : 1060*1060mm,PLATEN DIMENSION (H*V) : 1560*1560mm,MOLD THICKNESS - STANDARD : 500~1100mm,DITCH PROCESSING : 450~1050mm,MOLD CLAMPING STROKE : 1200mm,DAYLIGHT - STANDARD : 1700~2300mm,DITCH PROCESSING : 1650~2250mm,EXTRUSTION FORCE : 245(25)KN(T),EXTRUSTION STROKE : 200mm,INJECTION ABILITY : i82,SCREW DIAMETER : (A-100,B-112,A-112,B-120)mm,THEORETICAL INJECTION VOLUME : (A-4712,B-5911,A-6620,B-7600)cm cube,INJECTION MASS(PS CONVERSION) : (A-4335,B-5438,A-6090,B-6992)g, NOMINAL OUNCE : (A-171,B-214,A-240,B-276)oz,INJECTION PRESSURE : (A-171.3(1,748),B-136.5(1,394),A-171.6(1,751),B-149.5(1,525))MPa(kgf/cm),INJECTION RATE (at70kgf/cm) : (A-818,B-1026,A-816,B-937)cc/sec,SCREW ROTATION SPEED : AB-110,AB-83rpm,PUMP MOTOR : 55+55=110KW,BARREL HEATER CAPACITY : AB-54,AB-59.6,OIL TANK CAPACITY : 1500L,COOLING WATER VOLUME : 200*32 DEGREE C L/min,NOZZLE HEIGHT : 1525mm,FREQUENCY : 50Hz.

3100H Screw diameter 92mm 5,351,500 shots

1400H screw diameter 76mm 4,940,000 shots

CAPACITY : 3500T,Screw dia : 175mm With Funac 6 axis Robot and MQDC and Auto clamp and mold temperature etc...

CAPACITY : 3000T,Screw dia : 175mm,Clamping force : 3000 metric tons,Mould thickness : 1000~1900MM,Injection capacity : 21000cm3,Mould size max : 2550*1790 or 1890*2450MM,With yudo Star Robot 2004year.

LG 3000ton. +auxiliary pump,LG 3500ton,Screw dia : 160mm,maximum injection volume : 16260g,Administration : 1800/2700mm,capacity : 1140kw,electric capacity : 220kw,With 6 axis Robot and MQDC and Auto clamp and hopper dryer

CAPACTITY : 3000T,LG 3000ton,Screw dia : 160mm,Motor capacity : 255KW,With Robot and MQDC and Auto clamp and hopper dryer .

CAPACITY : 3000T,Screw dia : 140mm,Clamping force : 29400kN,Opening force : 1960kN,Control type : Injectvisor IV-IV21,With Yushin robot, auto clamp.

Electric motor 220ton thermosetting Thermosetting plastics SCREW DAIM 65mm? TOTAL SHOT 3.050 times is the best machine.

Hydraulic machine 260ton Screw 50/50mm Corrosion and wear resistance complete degree is good.

Screw diameter 66mm Screw stroke 260mm Injection mass (PS) 810g Maximum injection pressure 177MPa Clamping force 2750KN, Machine weight T : 13,machine dimensions : 7280

Unused 280T molding machine JSW made in 2017 ! I haven't even tested it and I haven't gotten it once! Screw diameter 66mm Screw stroke 260mm Injection mass (PS) 810g Maximum injection pressure 177MPa Clamping force 2750KN *See photos for other details. Special specification Nozzle shape/plunging amount KC Nozzle (Integrated) ?3