TECH CAPACITY : M40

CAPACITY: 230 TON,MAX. OUTR DIA. : 64, MAX O.D. FOR COMBI BLANKS: 55 , BAR DIA.; 19~40 , CUTTING WIDTH; 22~72 , WEIGHT OF pieces; 40~72 g ,MAIN RAM STROKE :160 ,WEIGHT : 35.8 TON

POWER ; 230 TON, MAX. BAR DIA. ; 40, MAX. PART OD; 64, MAX CUTOFF BLANK WEIGHT; 540g, MIN. MAX BLANK HEIGHT; 12~30, CUTTING LENGTH; 20~70, RAM STROKE; #1 ; 80 ,RAM STROKE; #2,3,4 ; 240, DIE INTER-CENTER CRANK PIN DIA.; 240, CRANK PIN DIA.; 360, EJECTOR STROKE; 40, PKO; 20, PRODUCTION RATE; 150 ppm, MAIN MOTOR POWER; 75 kW, MACHINE WEIGHT; 45 TON

4 Station, Product Diameter (Simplex Ring) : ⌀48mm ~ ⌀103.6mm, Product Diameter (Intermitent Heading) : ⌀103.6mm, Hieght of Product : 12 ~ 60mm, Heading power : 816 T, Material Diameter : 32~50mm, Cutting Length : 110mm, Cut Off Weight : 29.5 kg, Core Internal die : 250mm, No 2 & 3 Die Diameter : 235mm, PKO Length : 30-40mm (Changing Indivisual Cam), KO Length : 80mm, Ram Stroke : 300mm, Production Speed Per Minute : 45 ~`100mm, Main Motor : 180 Kw, Machine Dimensions : (W 5.0*L 7.0* H 3.0), Machine Weight : 150T, Air Pressure : 0.6Mpa, Air Consumption : 1.700 1/H, Cooling Water Pressure : 0.6Mpa, Cooling Water Volume : 1000(per Minute), Roll Height : 1700mm

TECH CAPACITY : M60

DIE(STATION): 4 Section, Capacity: 1200 Ton ,Max outer diameter of piece: 120 mm, Max. bar diameter: 65 mm, Length for cutting: 45-140 mm,Stroke of ram: 381 mm, Stroke of cutting arm: 254 mm, Stroke: 40-70 /min, Weight of piece: 0.4-3.1 kg, Height of the press: 3200 mm, Spare parts available are as follows: Electric engine 1 piece, Adjustment wedges 2 pieces, Superior pliers: 1 piece,Inferior pliers: 1 piece, Die mass clamping piston: 1 piece, Break belt: 1 piece, Weight: 180 Ton

?22 ~ 25 * 250mm,L 3600 x W2000 x H2700 mm,Machine weight T: 12t

Thread out Dia Meter (Min-Max): 5 - 75 mm, Max.Thread Length: 147 mm

HRD-M

Max. Rolling Pressure(KN) : 200, Max. Spindle Revolution(/min) : 75.

THI-12R

Thread dia: 16~22mm,Die pocket height : 75mm, Blank length : 150mm, Spindle speed/min : 20~40rpm, Run motor : 0.4KW.2P, Amount of oil : 160L, Coolant oil quantity : 250 L, Blank Length: 2d~150,Thread Length: 70 (MAX),Output pcs :30~150 pcs min,Size - Size – (mm) : L5~7m x W2m x H2.1m,Mechanical weight : 5,500kgs, Weight - Unit Weight – (t) : 5.5 tons.

16mm product size,Size - Size – (mm):L x W x H,Weight - Unit Weight – (t):3.5 tons,Thread rolling dis:Φ12~16mm,die pocket height:80mm,blank length:150mm,spindle speed/min:20~50,hopper motor:0.4~1.5KW.GM,coolant motor:0.4KW.2p,gear oil quantity:80L,coolant oil quantity:180L,machine weight:3,500kgs,installation areaL*W*H(mm):4~6*2*2.

"Thread rolling diameter: φ4 to 10mm Neck dimension: 80mm Production volume: 300 pieces/min Required horsepower: 9.5kw,Weight - Unit Weight – (t):2.0 tons"