FANUC16i-MB BT50 30 ATC Table size 1000×1200 Spindle speed 12000rpm Stroke X1500 Y1200 Z900 W400 Arbitrary indexing Center through (3Mpa) Chip conveyor

TECH CAPACITY : φ:110

Control:Tosnuc 888, Table area:1400x1600mm,Table indexing: arbitrary indexing,S(XYZW): 2000x1500x1450x500mm,5to3000rpm,BT 50,ATC-90

W21FA-2, Maximum workpiece size: 800 x 600 x 215, Maximum workpiece weight: 500kg, TABLE SIZE : 590×514mm, Stroke (XYZ) : 350×250×220mm, S (U×V) : ±32×±32, Wire diameter used : φ0.1 to φ0.3mm.

F-180is-W, Maximum workpiece size: 820*730*300mm, Maximum workpiece weight: 1000kg, S(XYZ) : 550*370*310mm, Wire diameter used: φ0.1 to φ0.3.

Machining power supply: MGW-N,Table size : 920*600*1500kg,Stroke (X*Y*Z) : 600*400*260,Floor~Table : 1000,Maximum loading mass of table : 1500kg,Distance from floor to table top : 1000mm,Processing size : 1020mm*836mm,Maximum work piece size : 940*650*260mm,Machine width*depth*height : Non-CE Machine(2150*2150*200mm)CE Machine(2230*2215*2326mm),Required floor size : Non-CE Machine(3000*3350mm)CE Machine(3350*3350mm),Machine weight : 5400kg.

Table size : 920*600*1500kg,Stroke (X*Y*Z) : 600*400*260,Floor~Table : 1000,MC Body Dimension : L2230*W2215*H2326,Total electrical capacity : 4.7KVA,Processing tank size : 940*650*260mm,Machine width*depth*height : Non-CE Machine(2150*2150*200mm)CE Machine(2230*2215*2326mm),Required floor size : Non-CE Machine(3000*3350mm)CE Machine(3350*3350mm),Machine weight : 5400kg.

F-18iW Maximum work size: 790*730*300mm Maximum work mass: 1000kg Travel (X*Y*Z): 520*370*310mm Travel (U*V): ±60*±60mm

Maximum work 　　800 × 600 × (H) 215mm Mass 500kg ○ Table 　　590 × 514mm ○ Each axis movement amount 　　XYZ: 350 × 250 × 220mm 　　UV: ± 32 × ± 32mm ○ Maximum taper angle 　　15 ° (at plate thickness 100mm) ○ wire 　　wire diameter φ0.1 ~ φ0.3mm (※ φ0.1, φ0.15 optional) 　　maximum wire electrode traveling speed 15 m / min ○ mechanical size 　　dimensions: width 2300 × deep 2200 × height 1930mm 　　weight: 2590㎏

FANUC 180iS-WB Automatic wiring taper processing S: (XYZUV) 550 x 370 x 310 x ± 60 x ± 60 T: 770 x 590 Maximum work size 820 x 820 x 300

Controller: FANUC 180is-WB, Maximum workpiece dimensions: 650 x 570 x 250 mm, maximum workpiece volume: 250 kg, Table stroke: 37×270mm, Z-axis stroke: 255mm, UV axis stroke: ±60mm x ±60mm, maximum taper angle: ±30°/80mm, Wire diameter used: φ0.05 to 0.3 mm, maximum wire diameter: 10 kg.

In operation by Hyogo prefecture users With automatic wiring 0.3 wire 0.5 jet nozzle Warning light Patrite.

Specifications: 458 * 510 * 406

TECH CAPACITY : T:700x1000

MCOSMOS-V 3.0 (Windows XP) XYZ Measurement range 700 � 1000 � 600 Minimum display amount 0.0005 Maximum workpiece height 800 Maximum workpiece weight 800 kg Machine dimensions Width 1470 � back 1980 � high 2830 Machine weight 1630 kg Air dryer

Maximum outer diameter: 140mm, Mechanical bed area : width 750 * depth 680 * height 1350mm, Mechanical weight : 1300kg.

70°φ300, 2.2kw, change gear

GE-FANUC160i-M, Face milling : Maximum outer diameter: 220mm, Maximum normal module: 7.5mm, Maximum lateral module: 9mm, Tooth Tolerance: 6-180, Spiral angle: 0-60 degrees, Maximum transmission ratio: 10:1, Minimum transmission ratio: 1:1, Stove speed: up to 600 U/min, Maximum axis offset: 50 mm, Cutter Head Radius: 2.25" - 4.5", face hob: Maximum outer diameter: 200mm, Normal module: 1.5 - 6.5mm, Tooth Tolerance: 6-180, Spiral angle: 0-60 degrees, Max/Min Transmission Ratio: 10:1 / 1:1, Maximum allowable tooth width: 55mm, Cutter head radius: 49 - 110 mm, Maximum axis offset: +/-50 mm, Machine weight T : 16.5T.

Spindle stroke: 450ST, 100-600rpm, Machinable workpiece inner diameter: MAXφ130mm, Machinable workpiece inner diameter length: 300mm.

GOT1000 (Mitsubishi control), Number of pressurizing axes: 2, Machining capacity: φ60*150mm, Spindle stroke: 250mm, Spindle reciprocating speed: Max. 50m/min, 600rpm, Index table: φ500/4 divisions.

(Daihen 6-axis welding robot) * We have confirmed the operation and maintained it. * It is a single welding robot with CO2 specifications.

Matsushita 6-axis welding robot (inspected and maintained by us)

TM-1400G?,2015

Spot welding robot equipment set (set of 2 robots) Controller: DX200 Contactor: TC-4C Tip dresser included Includes a robot stand

with robot Pulse YAG Oscillator: OYL-105P (500W) Maximum welding capacity: AL/1.0t SUS/2.0t No partition or surface plate

Handy type Oscillator: OYL-055P

CAPACITY : 2290 kva,Phase & Wire : 3Phase 4 Wire,Power Factor : 0.8 lagging,It's using time This generator. Only 159h.