CAPACITY : 400T,Number of strokes : 30-55spm,Stroke length : 200mm , Die height : 550mm, Slide adjustment : 120mm, Slide dimensions (left to right x front to back) : 2300 x 900mm, Bolster dimensions(left to right x front to back) : 2350 x 1100mm, Emergency stop time : 200m/sec, Main motor : 37KW.

S: 150 40-80spm DH: 450 BL:2200*900 SL: 2200*700

Capacity: 300ton Stroke length: 255mm No-load continuous strokes: 30-80spm Die height: 610mm Slide adjustment amount: 100 mm Slide dimensions (LR x FB): 2500 x 1250 mm Bolster dimensions (LR x FB): 2500 x 1250 mm Main motor: 45kW

Capacity : 300 ton, Stroke: 150, Spm : 35-70, Die Height : 500, Slide Area: 2200 * 700, Bloster size: 2200 * 900

capacity : 300 ton, Stroke: 200,Die Height : 550, Slide Area: 1850 * 880, Bloster size: 1850 * 1000

Capacity : 300T, Stroke : 90mm, Stroke per Minute : 60~150spm, Die Height : 520mm, Slide Adjustment : 90mm, Slide Area : 1850*830mm, Bolster Area : 1850*1000mm, Motor : 37Kw

Capacity : 300T, Stroke : 200mm, Stroke per Minute : 27~70spm, Die Height : 550mm, Stroke Adjustment : 100mm, Slide Size : 3200*1200mm, Bolster Size : 3200*1200mm, Motor : 37kW, With Coil Feeder

Capacity : 500T, Stroke : 300mm, Stroke per Minute: 30~60spm, Die Height: 700mm, Slide Adjustment: 100mm, Slide Area : 2450*1800mm, Bolster Area : 2450*1800mm, Motor : 75 kW

Pressurizing capacity 300 ton Stroke: 200mm, Stroke per Minute: 40~100mm, Die Height: 550mm, Slide Length: 105mm, Slide Size: 1850 * 880mm, Bolster Size: 1850 * 1000mm

Capacity : 200T, Stroke : 200mm, Stroke per Minute : 50~120spm, Die Height : 475mm, Slide Adjustment : 100mm, Slide Area : 1550*830mm, Bolster Area : 1550*950mm, Motor : 30Kw

Capacity : 200T, Stroke : 200mm, Stroke per Minute : 50~120spm, Die Height : 475mm, Slide Adjustment : 100mm, Slide Area : 1550*830mm, Bolster Area : 1550*950mm,

Capacity : 500T, Stroke : 250mm, Stroke per Minute :30~70spm, Die Height : 550mm, Slide Adjustment : 100mm, Slide Area : 2450*1150mm, Bolster Area : 2450*1250mm,

Capacity : 300T, Competence Biovariate (lower Point above) 6.5, Stroke : 200mm, Stroke Per Minute : 40~100spm, Die Height : 550mm, Slide Adjustment : 100mm, Slide Area : 2150*900mm, Bolster Area : 2150*1000mm, Without Die Cushion

Capacity: 600T, Stroke : 250mm, Stroke per Minute : 60~70spm, Bolster Area: 2450*1300mm, Slide Area: 2450*1200, Die Height: 650mm, Slide Adjustment: 200mm, With ORII Coil Feeder, With 600mm, Thickness 0.6~6.0mm

Capacity : 500ton, Pressure ability: 4900kN, Stroke length : 250mm, strokes speed: 125 mm/sec, Die height : 850mm, Emergency stop time: 280msec,Maximum stop time:300msec, Main motor: 92.5kW.

Capacity : 300ton, Stroke length : 350mm, Number of strokes : 30 spm, Die height : 700mm, Slide adjustment : 10mm, Slide dimensions (front/back*left/right) : 2100*1000mm, Bolster dimensions (left/right*front/back*thickness) : 2400*1200*200 mm,Machine weight : 44530 kg, Emergency stop time : 295 ms, maximum stop time : 330 ms.

Capacity : 300ton, Stroke length : 350mm, Number of strokes : 30 spm, Die height : 700mm, Slide adjustment : 10mm, Slide dimensions (front/back*left/right) : 2100*1000mm, Bolster dimensions (left/right*front/back*thickness) : 2400*1200*200 mm,Machine weight : 44530 kg, Emergency stop time : 295 ms, maximum stop time : 330 ms.

CAPACITY : 150 T , S: 130~ 55min,DH: 420

Capacity: 40t, Stroke lenght : 70mm, Number of stroke : 100spm, Die Height : 340mm,Slide dimension (left to right x front to back) : 630 x 440mm,Bolster dimension (left to right x front to back): 630 x 440mm,Bed height : 720mm.

CAPACITY: 1600TON, STROKE LENGTH: 900MM, STROKE SPEED: 10-20SPM, DIE, HEIGHT: 1,450MM, BOLSTER DIMENSION: 4600 x 2500MM, SLIDE ADJUSTMENT: 700MM, MAIN MOTOR: 450KW x 4P, FRONT MOOVING TYPE.

Capacity : 3OOT, Number of strokes : 15~25spm, stroke length : 450mm, Die height : 840mm, Slide adjustment amount : 350mm, Slide dimensions (left and right x front and back) : 2500 x 1200mm, Bolster dimensions (left and right x front and back x thickness) : 2500 x 1300 x 180mm, Sudden stop time : 200ms, Setting position of over run monitoring : 15 degrees.

Capacity : 200t, Stroke length : 130mm, Number of strokes : 45spm, Die height : 450mm, Slide adjustment : 100mm.

Capacity : 800ton, stroke length : 150mm, number of strokes : 20 to 70 spm, Die height : 740mm, Slide dimensions (left to right x front to back) : 1850×1030 mm, Bolster dimensions (left to right x front to back) : 1850×1000 mm, Main motor : 75kw.

Capacity:4000ton,Load curve : 13mm, Stroke Length : 500mm, Die height : 1550mm, Bolster area : 7620mmx1980mmx350mm, Slide adjustment : 500mm, Cushion Pad : 990mmx1080mm, Distance between Pad and Bolster :10mm, Number of Die cushion pad : 7, Die cushion capacity: 441(63x7)Ton, Die cushion stroke: 250mm, Stroke per minute: 6SPM.

Pressure ability : 300 ton,Number of strokes : 20-40 mm,Stroke length : 400mm,Die height : 650mm,Slide adjustment amount : 200mm, Bolster dimensions (front and back x left and right): 1400 x 2000mm Slide dimensions (front and back x left and right): 1200 x 1800mm, Setting position of overrun monitor : 10 degree, Mechanical weight : 40 ton. Accessories - Width t : 1.6-5.5mm uncoiler leveler.

PRESSURE CAPACITY : 200T,Number of stroke : 15-25,Stroke length : 500,Die height : 700,Slide adjustment : 150,Emergency stop time : 265,Maximum stop time : 265,Overrun monitoring Device/setting position : 10,Power supply : 200 V 360,Main motor : VS 22.

PRESSURE CAPACITY : 300T,Number of stroke : 45-30,Stroke length : 500,Die height : 700,Slide adjustment : 160,Bottom surface dimensions of the slide (left and right * front and back) : 1300*1300,Bolster dimensions(left and right * front and back) : 1500*1500,Emergency stop time : 150,Overrun monitoring Device/setting position : 10,Power supply : 200 V 360,Main motor : 30,Using air pressure : 6.

Capacity : 800T, Stroke length : 200mm, Number of stroke :10-30spm, Die Height :300mm, Slide adjustment : 50mm, Slide dimension (left to right x front to back) :2200*900mm, Bolster dimension (left to right x front to back) : 2200*1000mm.

Ability: 1000T Stroke length: 600mm Number of strokes: 12 spm Slide adjust: 400mm Die height: 1100mm Main motor: 75kw Bolster area: 4000 * 2000mm Slide dimensions: 3700 * 1800mm Adjust motor: 11kw Die cushion capacity: 50t * 2 = 100t Cushion stroke: 300mm Cushion pad area: 1500 * 1450mm Balancer ability: 12t Date of manufacture: 1985

Capacity 600ton S: 300 20-80spm DH: 1350 Adj: 350 BL: 4300 * 2200 * 250 SL: 4300 * 2200

Capacity : 250 ton, Stroke length : 200mm, Number of strokes : 65spm, Die Height : 655mm, Slide dimension (left to right x front to back) : 900x1100 mm, Bloster dimension (left to right x front to back) : 1150x1100 mm, Bolster thickness: 180 mm, Die Cushion: 15 tons x 100 mm.

Capacity : 350 ton, Stroke Length : 400mm, Number of stroke : 15spm, Die Height : 1000mm, Slide adjustment : 350mm, Slide Area(left to right x front to back) : 2600 x 1400mm, Bloster size(left to right x front to back) : 2820 x 1650mm, Main motor: 37kw.

Capacity : 500 ton, Stroke length : 450mm, Number of stroke : 16spm, Die Height : 1100mm, Slide adjustment : 600mm, Slide dimension (left to right x front to back) : 2250 x 1250mm, Bloster dimension (left to right x front to back x thickness) : 2500 x 1500 x 220mm, Work surface height : 500mm.

Capacity : 500 ton, Stroke length : 650mm, Number of strokes : 14spm, Die Height : 1400mm, Slide adjustment : 600mm, Slide dimensions (left to right x front to back) : 3000 x 1700mm, Bloster dimensions (left to right x front to back) : 3000 x 1700.

CAPACITY: 1500T, B.D.C : 13mm, SLIDE STROKE : 800mm, SPM : 20, DIE HEIGHT: 1500mm, SLIDE ADJUSTMENT : 700mm, SLIDE & BOLSTER AREA : 4500*2500mm, DIECUSION CAPACITY : 300T, STROKE ADJUSTMENT : 0~300mm

CAPACITY: 1500T,STROKE LENGTH: 700mm,SPM: 10~20, DIE HEIGHT : 1500mm,SLIDE ADJUSTMENT : 700mm, BOLSTER AREA : 4000*2500mm, bolster thickness : 320mm , DIECUSHION CAPACITY : 230T, STROKE LENGTH : 0~300mm

Capacity : 110T, Stroke : 180, spm: 35-65, Die Height: 400, Electric Adj: 90, Bolstersize (front and back * left and right): 680 * 1660

Capacity: 600ton, Stroke : 300, Spm :20-80, Die Height: 1350, Slide Adjustment: 350, Bolster Size: 4300 * 2200 * 250, Slide Area: 4300 * 2200

Capacity : 400T, Stroke: 300, Spm: 20-35, Die height: 700, Bolster size: 3000 x 1400, Slide adjust: 120, Main motor: 37kw x 4P / 380V, Rotary cam switch: electronic

Capacity : 500T, Stroke : 500mm, Stroke per minute : 15~30spm, Bed Size : 3100*1350*200mm, Slide Size : 3100*1200mm, Die Height : 850mm, Slide Adjustment : 200mm, Motor : 75kw

Capacity : 200T, Stroke : 300mm, Stroke per minute : 18~34spm, Bed Size : 2000*1220mm, Slide Size : 1830*1000mm, Die Height : 820mm, Slide Adjustment : 400mm, Motor : 22kw

Capacity : 250T, Stroke : 140mm, Stroke per Minute : 50spm, Slide Adjustment : 15mm, Die Height :350mm, Slide Area :500*400mm, Bolster Area : 600*500mm, Motor : 22Kw Sonoruka Coil Feeder Model No. : DF-1-400 Serial No. : 3992 Plate Width : 70~400 Plate Thickness : 1.6~6.0mm Thickness * Width : 3.2*400mm Outer Dia : 1200mm, Inner Dia : 508mm, Quantity Feed : 2000mm Max Coil Weight : 3T

Capacity : 250T Stroke: 300mm Stroke per Minute: 22-44spm Die Height: 550mm Slide Adjustment: 120 Slide Area: 2100*700 Bolster Area: 2400*950 Mitsuan/DC (With Die Cushion)

Capacity : 250T Stroke: 300mm Stroke per Minute: 22-44spm Die Height: 550mm Slide Adjustment: 120mm Slide Area: 2100*700 Bolster Area: 2400*950 Mitsuan/DC

Capacity : 500T, Stroke : 500mm, Stroke per Minute : 15rpm, Slide Adjustment : 500mm, Die Height : 1100mm, Slide Size : 1600 x 2800mm, Bolster 1600 x 2800mm

Capacity: 1600T, Stroke : 700mm, Stroke per Minute :20spm, Die Height: 1650mm, Bolster Area: 3550*2240mm,

Capacity: 1000T, Stroke : 600mm, Stroke Per Minute : 12spm, Die Height : 1700mm, Slide Adjustment : 560mm, Bed Size : 3710*2200mm, Slide Size : 3290*2100mm, Bolster Plate : 3500*2200*200mm, Clutch Type : Friction, Hydromatic, Die Cushion Capacity : 240 (120*2) Stroke : 300mm, Main Motor Drive : 7.5 Kw, Slide Adjustment Motor : 7.5 Kw, Accessories : Over Load Project, Moving Bolster, Cushion Stroke, Safety Bar,

Capacity : 300T, Stroke : 360mm, Stroke per Minute : 15 ~ 35spm, Die Height : 700mm, Slide Adjustment : 170 mm, Bolster Area : 2150*1400mm, Slide Area : 2150*1250mm, Main Motor : 37 Kw

Capacity: 800T Stroke : 500mm, Stroke per Minute : 20spm, Bolster Area: 4000*2000mm Slide Area: 3700*1800mm, Die Height: 1100mm, Slide Adjustment: 420mm, Die Cushion Capability: 60*2 = 120Ton Cushion Stroke: 250min

Capacity: 300 T, Stroke: 200 mm, Strokes Per Minutes: 30 -80, Slide Adjustment: 100 mm, Die Height: 550 mm, Bolster Area: 1850 mm * 1100 mm * 200 mm, Slide Area: 1850 mm * 900 mm

Capacity : 300T, Stroke : 400mm, Stroke per Minute : 15-28spm, Die Height : 850mm, Bolster Area : 2300*1300mm,

Capacity (ton): 100, Stroke (mm) :140, Die Height (mm) :320, Bolster Area (mm) :830*760, Main Motor (kw) :5.5

Manufacture:KOMATSU, Model:E4S500-MB, Capacity (ton): 500, Y.O.M:1990, Stroke(mm):500, Slide Adjustment (mm):500, Strokes Per Minutes (min):13.5-20, Die Height (mm):1420, Slide Area (mm):2500*1700, Bolster Area (mm):2500*1700*230

Capacity: 500tT,Stroke (mm):300,Slide Adjustment (mm):250,Strokes Per Minutes (min): 15~45,Die Height (mm):650,Slide Area (mm):2500*1500, Bolster Area (mm):2500*1500,Main Motor (kw):75 With Coil Feeder-SPEC:- Thickness: 4 mm, Width: 600 mm Note: Machine already Dismandled.

Capacity:300T,Speed:20-60spm

Capacity:1200t,feed stroke:750mm,clamping stroke:210mm,lifting stroke:120mm,height of blank feed:645mm,height of pannel carryout:475mm,height of feed bar face:625mmm,min blank size:150x460mm,blank thickness:0.5-1.66mm

Capacity:4000ton,Load curve : 13mm, Stroke Length : 500mm, Die height : 1550mm, Bolster area : 7620mmx1980mmx350mm, Slide adjustment : 500mm, Cushion Pad : 990mmx1080mm, Distance between Pad and Bolster :10mm, Number of Die cushion pad : 7, Die cushion capacity: 441(63x7)Ton, Die cushion stroke: 250mm, Stroke per minute: 6SPM, Motor Specifications:1.Main Motor: Hitachi,220KW,400V, 2.Slide Adjustment Motor:Hitachi,15KW,200V,3.Motor for Hydraulic unit: Hitachi,15KW,200V,4.Brake cooling Motor:Hitachi,2.2KW,200V,5.Grease Pump Motor: Hitachi,0.2KW,200V, 6.Motor for cushion packing oil: Hitachi, 2.2KW,200V.

stroke length:450mm, number of strokes:25spm, die height:675mm, slide adjustment:200mm, bolster dimension:(front and back � left and right): 1900✕1200mm,Slide area:2100x1350mm

Capacity:300ton, Die height:900mm, Stroke per minute:20~60SPM, Bolster area: 2770x1800mm,slide area:2500x1800mm, moving bolster, with feeder and Feeder Miminum thickness:0.6mm, maximum thickness:3.2mm, width:1.5mm,

capacity: 300ton,stroke length: 350mm, die height: 700mm,number of stages:10, stroke per minute:2.(20-40)3.(20-30), maximum drawing depth:2.(120)3.(180), slide adjustment: 100mm,slide area: 3000x1000mm, bolster area: 3000x1000mm, working floor height: 1070mm above floor level, :ORII feeder year :1983: roll minimum thickness:0.3~3.2mm, width:30-600mm

Capacity:300ton, Stroke length:450mm, Stroke per minute:15~25mm, Bolster area:2100x1350mm, Slide area:1900x1200mm,Main motor:37KW

Capacity: 300 ton Transfer Press, Stages-8 SPM : 30~60, DH : 500, 30Kw

Capacity 300 tons, Stroke length 450, Number stroke 18, Die height 700, Slide adjustment amount 200, Slide area 1900 � 1200, Bolster area 2150 � 1350, The main motor 30 Kw, Slide adjustment motor 2.2 Kw, With Die-cushion Capacity 50 tons (1 putt), Stroke length 225, Pat area 1500 � 660, Ray type with safety equipment, with portable stand, This machine is currently in use.

Capacity : 1200t, Normal pressure : 254 kgf/cm, Stroke length : 1700mm, Daylight : 2200mm, Table area : 3500 x 2200mm, Inertia drop value : 70mm, Emergency stop time : 200m/sec.

Capacity : 500t, Stroke length : 1500mm, Maximum sliding speed : 150 mm/sec, Slide inertia lowering value : 150mm, Emergency stop time : 220ms.

Capacity : 1400t, Stroke length : 1600mm, Die height : 2600mm, Table area (left to right x front to back) : 4000 x 2400mm, Emergency stop time : 270ms.

Capacity: 1500T, Stroke length:1700 mm, High Pressure: 30.1MPa, Bolster dimensions : 3500X2500mm, Bottom of slide290mm/s, Daylight: 2000mm.

Capacity : 250T, Day light: 700 mm, Bolster dimension: 1800*1000mm, Slide dimension : 1200*800mm, With die cushion.

Capacity : 150ton, Stroke : 200mm, Daylight : 750mm, Bolster : 1400x1100mm, Slide : 1400x1100mm, Motor : 45kw.

Capacity : 400t, Stroke length : 630mm, Open height : 1000mm, Slide dimension (left to right x front to back) : 1200mmx850mm, Bolster dimension (left to right x front to back) : 2000mmx1300mm.

hydraulic press Maximum pressure: 20.7MPa S: 500 Downloads: 600 T: 1000*700

Capacity: 200 T, Stroke length: 300 mm, Table dimensions: 2000 x 1000 mm, Slide dimensions: 2000 x 700 mm, Daylight: 600 mm.

Capacity : 425T, Stroke length : 500mm, Die Height : 700mm, Bolster dimension (left to right x front to back) : 900 x 700mm.

Capacity : 400t, Stroke length : 630mm, Open height : 1000mm, Slide dimension (left to right x front to back) : 1200mmx850mm, Bolster dimension (left to right x front to back) : 2000mmx1300mm.

CAPACITY : 600T hydraulic Press, Stroke : 900, Die Height : 1200, Bolster Size : 3200*1000,

Stroke length : 2800, Pressure capacity : 2500, Table dimensions : 4000x3000, Daylight : 3500mm, Bottom of slide : 250mm/s

Capacity：1000t, bolster area：3500×2000, sliding area：3500×2000, open height：1600, stroke：1300, ram diameter center：Φ560, side：Φ390×2, pull-up cylinder diameter：Φ140×2, pull-up force：60t, no-load rate rise：210, low-speed rise：20, descent：300, low-speed descent：80, pressurized velocity, central pressurization：０～175TON 50, 175～500TON 50～30, total pressurization：600TON hereinafter23, 600～1000TON 23～16, low-speed pressurization：2～15, maximum speed pressure, 210t, die cushion output：300t, pad area：2700×1570, stroke：400, cylinder diameter：Φ236×3, no-load rate rise：100, low-speed rise：0～10, knockout：25t, working pressure：230

Eco-servo specifications : Capacity : 500T, bolster size : 3000 * 1650 , Stroke : 1500 , DL : 1800 , Die cushion 40-200t , Die cushion stroke: 300T , Cushion pin diameter φ40 20 cushion pins

Capacity : 600t,Hydraulic cylinder : 1, Piston dia: 600 mm, Rod dia: 565 mm, Stroke : 1200 mm, Day light : 1500 mm, Slide Table : 2,500 x 1500 mm, Bolster size : 2,500 x 1500, With DC

Capacity : 600t,Hydraulic cylinder : 1, Piston dia: 600 mm, Rod dia: 565 mm, Stroke : 1200 mm, Day light : 1500 mm, Slide Table : 2,500 x 1500 mm, Bolster size : 2,500 x 1500, With DC

Capacity : 600T

1000T hydraulic press Kawasaki Hydromechanics Power: 1000t S: 1300 BL: 4500 * 2000

Capacity : 100T, T: 1000 x 800 x thickness 150 Inertia drop value 20.5 S: 500 Inertia drop value 20.5mm Motor 3.7kw Machine Dimensions: W2.8 x D1.16 x H3.27M Machine Weight: 6.0 T Ray cutout die cushion

CAPACITY : 500T hydraulic Press, Stroke : 1200, Die Height : 1600, Bolster Size : 2500*2200, Slide Size : 2500*2200

Capacity: 500 T, Stroke: 800 mm, Table Area: 2500 mm * 1800 mm

Max Capacity:　1200 T, Stroke:　1500 mm, Daylight(Max Opening):　2100 mm, Down Speed:　250 mm/sec, Pressing Speed:　25(less than 370T)~15mm/sec(600T), Auto change15mm/sec(1200T), Shut Height: 600mm, Up Speed:　250 mm/sec, Bolster Area:　2500mm x 2000mm(LR x FR), DIE CUSHION - Cushion Pad area: 2050 * 1560mm, Capacity:　140~700 (T), Cylinder no.: 175 T * 4ea, KNOCK OUT - Capacity: 50 T, Max Stroke: 650mm,

Capacity: 750T, Stroke: 900mm, Daylight:1700mm, Table : 3500 x 1500mm, Bed : 2000 x 1500mm

Capcity : 200t, Storke length : 100mm, Number of stroke : 50-100 spm, Die Height: 350mm, Slide Adjustment : 100mm, Bolster work surface height: 975mm, Bolster dimension (left to right x front to back x thickness): 1000 x 1000 x 140mm, Slide dimension (left to right x front to back) : 850 x 700mm.

Capacity : 300T , Stroke : 1100 , Open Height : 1600 ,Bolster : 1400* 1300Die cushion

capacity :200t, Stroke :100, spm : 50～100spm,Die Height :400, Adjustment :40, Side Adjustment:700*650, bloster size :700*650*200

Capacity: 500T, Stroke Length: 300mm, Stroke per Minute: 15~35spm, Die Height: 600mm, Slide Adjustment: 120mm, Bolster Size (Bed Size): 1200*1215mm Slide Size: 1200*1100mm With Uncoiler Model No. : LF6032WNCSP Plate Width: 70~600mm Plate Thickness: 2.3~8.0mm Coil Outer Diameter: 1500mm Coil Inner Diameter: 508mm Max Quantity Feed: 35 spm

Capacity: 500T, Stroke: 300mm, Stroke per Minute: 20~40spm, Die Height: 650mm, Slide Adjustment: 150mm, Slide Area: 1200*1100, Bolster Area: 1200*1200, Power generating position (on Bottom Dead Point):13mm

Hydraulic Press :1000T, Stroke : 600mm, Die Height :1000mm, Slide Size : 1500X1100mm, Bolster Size :1500X1200mm,

Capacity : 200T (Single crank), Stroke: 160mm, Stroke Per Minute :30spm, Die Height: 500mm, Slide Adjustment: 100mm, Bolster Area: 1000 * 1000mm

Capacity : 200T, Stroke: 250mm, Stroke per Minute :10-25spm, Die Height: 510mm, Bolster Area: 1500 * 1000mm, Slide Adjustment: 125mm, PAD: 635 * 685, Die cushion: 20T, With Auto Clamp

Capacity: 600T, Stroke: 350mm, Stroke per Minute: Max. 20spm, Die Height: 900mm, Slide Adjustment: 150mm, Slide size: 1200x1200mm, Bolster size: 1250x1220x210mm, Motor : 45 kw

Capacity: 500T, Stroke: 250 mm, Stroke per Minute :11spm, RPM: 20, Die Height: 550 mm, Bolster Size (Left & Right)*(Front & Back): 1300 mm * 1200 mm, Slide Size: (Left & Right)*(Front & Back): 1000 mm * 1000 mm, Main Motor: 55 KW 6P.

Capacity: 300T, Stroke: 250 mm, Stroke per Minute:37spm, Die Height: 550 mm, Bolster Size (Left & Right)*(Front & Back): 1200 mm * 1200 mm, Slide Size: (Left & Right)*(Front & Back): 800 mm * 1000 mm, Slide Adjustment: 150mm, Main Motor: 30 KW 4P.

Capacity:300T (Crank Motion) Stroke:300mm, Stroke per Minute : 20-30spm, Die Height : 520mm, Slide Size : 900x1100mm, Bolster Size :1100x1100mm

Capacity: 700ton, length of the stroke: 300mm, RPM: 25RPM, slide adjustment:200mm, die height:775mm, Bolster area:1000x1000mm, slide area:1000x1000mm

Capacity: 150 ton, PS-15, SPM : 60, DH : 480, BL : 800x800 mm, SL : 700x700 with die-cushion

Capacity : 800t, Daylight: 2000mm, Stroke length: 1600mm, Bolster dimensions: 3000 x 2000, Slide dimensions: 3000 x 2000, Allowable upper mold mass : 12t,Main hydraulic pump : 412/min, From the floor to the top of the bolster : 310mm, Oil tank capacity : 1500 lit, Total height above floor : 7200mm.

Acai hydraulic press 300 tons Pressurizing capacity 30-300 tons Pulling capacity 28 tons Maximum opening 1400mm Minimum opening 500mm Descent speed 300mm / sec Rise speed 300mm / sec Bolster area 2000 x 1500 mm Slide area 2000mm x 1500mm Stroke 900mm Traction motor 55 kw Tank capacity 800L Maximum oil pressure 275kg / cm3 Die cushion ??Capacity 20-150T ??Stroke 350mm ??Pad area 1550 mm x 1050 mm

CAPACITY:200T, BL:800*500

UNIT 1 - MAKE : HITACHI ZOSEN, MODEL : QP-55065, Capacity : 3000t, Stroke length : 500mm, Number of strokes : 12 spm, Slide adjustment : 400mm, Slide dimensions(left to right x front to back) : 2000×8000mm, Bolster dimensions(left to right x front to back) : 2000×8000mm, Bolster thickness : 300mm. UNIT 2 - MAKE : HITACHI ZOSEN, MODEL : QP-8981, Capacity : 2000t, Stroke length : 460mm, Number of strokes : 12 spm, Slide adjustment : 400mm, Slide dimensions(left to right x front to back) : 1980×7400mm, Bolster dimensions(left to right x front to back) : 1980×7400mm, Bolster thickness : 280mm. UNIT 3 - MAKE : HITACHI ZOSEN, MODEL : QP-423, Capacity : 2000t, Stroke length : 500mm, Number of strokes : 12 spm, Slide adjustment : 400mm, Slide dimensions(left to right x front to back) : 1980×7620mm, Bolster dimensions(left to right x front to back) : 1980×7620mm, Bolster thickness : 280mm.

UNIT 1 - MAKE : IHI, Capacity :2300t, Stroke length : 850mm, Number of stroke : 16 spm, Die height : 1400mm, Slide adjustment : 500mm. UNIT 2 - MAKE : IHI, Capacity :1000t, Stroke length : 650mm, Number of stroke : 20 spm, Die height : 1600mm, Slide adjustment : 650mm. UNIT 3 - MAKE : IHI, Capacity :1000t, Stroke length : 650mm, Number of stroke : 20 spm, Die height : 1600mm, Slide adjustment : 650mm. UNIT 4 - MAKE : IHI, Capacity :1000t, Stroke length : 650mm, Number of stroke : 20 spm, Die height : 1600mm, Slide adjustment : 650mm. UNIT 5 - MAKE : IHI, Capacity :1000t, Stroke length : 650mm, Number of stroke : 20 spm, Die height : 1600mm, Slide adjustment : 650mm.

UNIT 1 - MAKE : AMINO, Capacity : 1600t, UNIT 2 - MAKE : IHI, MODEL : SL4-1500-440-210, Capacity : 1500t, UNIT 3 - MAKE : IHI, MODEL : SL4-2300-450-220, Capacity : 2300t, UNIT 4 - MAKE : KOBE, Capacity : 1200t.

UNIT 1 - Capacity : 1000t, Inner : 800t, Outer : 600t, Lower slide : 450t, Bolster : 100 inches x 160 inches, Weight : 310t. UNIT 2 - MODEL : TF-41400-160-100, Capacity : 800t, Stroke length : 600mm, Number of stroke : 20spm, Slide adjustment : 450mm, Bolster dimension (left to right x front to back x thickness) : 3000 x 2000 x 270mm, Slide dimension (left to right x front to back) : 3000 x 2000mm.

UNIT 1 - MODEL : E4S800-MFC, Capacity : 800t, Stroke length : 600mm, Number of stroke : 20spm, Die height : 1350mm, Slide adjustment : 550mm, Bolster dimension (left to right x front to back x thickness) : 3000 x 2000 x 270mm, Slide dimension (left to right x front to back) : 3000 x 2000mm, Main motor : 132 Kw. UNIT 2 - MODEL : NC-S4-5, Capacity : 500t, Stroke length : 600mm, Number of stroke : 15 spm, Shut height : 1200mm, Slide adjustment : 450mm, Slide dimension (left to right x front to back) : 3000 x 2000mm, Bolster dimension (left to right x front to back x thickness) : 3000 x 2200 x 200mm, Die cushion stroke : 300mm, Cushion pad area(left to right x front to back) : 1600 x 1250 x 2mm. UNIT 3 - MODEL : NC-S4-5, Capacity : 500t, Stroke length : 600mm, Number of stroke : 12 spm, Shut height : 1200mm, Slide adjustment : 450mm, Slide dimension (left to right x front to back) : 3020 x 2200mm, Bolster dimension (left to right x front to back x thickness) : 2990 x 2200 x 200mm, Die cushion stroke : 300mm, Cushion pad area(left to right x front to back) : 1250 x 1800 x 2mm.

UNIT 1 - MODEL : L4S1500-MBC, Capacity : 1500t, Stroke length : 800mm, Number of stroke : 5 & 8~16spm, Die height : 1350mm, Slide adjustment : 600mm, Slide dimension (left to right x front to back) : 3700 x 2000mm, Bolster dimension (left to right x front to back x thickness) : 3700 x 2000 x 280mm, Die connection capacity (1 pad 2 cylinders) : 300t, Die cushion stroke : 320mm, Main motor : 200 Kw, Emergency stop time : 320ms. UNIT 2 - MODEL : S4-750-45x21, Capacity : 750t, Stroke length : 750mm, Number of stroke : 12 spm, Slide adjustment : 450mm, Slide dimension (left to right x front to back) : 4572 x 2134mm, Bolster dimension (left to right x front to back x thickness) : 4572 x 2134 x 200mm, Die cushion stroke : 440mm. UNIT 3 - NC-S4-8, Capacity : 800t, Stroke length : 600mm, Number of stroke : 15 spm, Die height : 1500mm, Slide adjustment : 600mm, Slide dimension (left to right x front to back) : 4430 x 2200mm, Bolster dimension (left to right x front to back x thickness) : 4400 x 2200 x 250mm.

UNIT 1 - MODEL : L4S1000-MFC, Capacity : 1000t, Stroke length : 800mm, Number of stroke : 5 & 8~18spm, Die height : 1350mm, Slide adjustment : 600mm, Slide dimension (left to right x front to back) : 3000 x 1800mm, Bolster dimension (left to right x front to back x thickness) : 3000 x 1800 x 280mm, Die connection capacity (1 pad 2 cylinders) : 150t, Die cushion stroke : 300mm, Main motor : 160 Kw, Emergency stop time : 280ms. UNIT 2 - MODEL : PL-S4-500(1), Capacity : 500t, Stroke length : 600mm, Number of stroke : 12 spm, Slide adjustment : 600mm, Slide dimension (left to right x front to back) : 2700 x 1700mm, Bolster dimension (left to right x front to back) : 2700 x 1700mm, Die cushion stroke : 300mm, Main motor : 55 Kw. UNIT 3 - MODEL : PL-S4-400, Capacity : 400t, Stroke length : 460mm, Number of stroke : 15 spm, Slide adjustment : 360mm, Slide dimension (left to right x front to back) : 2700 x 1530mm, Bolster dimension (left to right x front to back) : 2700 x 1530mm, Knockout amount : 130mm, Main motor : 55 Kw. UNIT 4 - UNIT 2 - MODEL : NC-S4-5, Capacity : 500t, Stroke length : 600mm, Number of stroke : 12 spm, Shut height : 1200mm, Slide adjustment : 450mm, Slide dimension (left to right x front to back) : 2750 x 2000mm, Bolster dimension (left to right x front to back x thickness) : 2990 x 2200 x 200mm, Die cushion stroke : 300mm, Cushion pad area(left to right x front to back) : 1250 x 1800 x 2mm, Main motor : 55 Kw.

UNIT : 1, Capacity : 800t, Stroke length : 700mm, Number of stroke : 18rpm, Die height : 1700mm, Slide adjustment : 700mm, Bolster dimension (left to right x front to back x thickness) : 4000 x 2100 x 300mm, Slide dimension (left to right x front to back) : 4000 x 2100mm, Die connection capacity (1 pad 2 cylinders) : 120t, Die cushion stroke : 300mm, Main motor : 90 Kw. UNIT : 2, Capacity : 800t, Stroke length : 700mm, Number of stroke : 18rpm, Die height : 1700mm, Slide adjustment : 700mm, Bolster dimension (left to right x front to back x thickness) : 4000 x 2100 x 300mm, Slide dimension (left to right x front to back) : 4000 x 2100mm, Die connection capacity (1 pad 2 cylinders) : 120t, Die cushion stroke : 300mm, Main motor : 90 Kw.UNIT : 3, Capacity : 1000t, Stroke length : 700mm, Number of stroke : 18rpm, Die height : 1700mm, Slide adjustment : 700mm, Bolster dimension (left to right x front to back x thickness) : 4300 x 2100 x 300mm, Slide dimension (left to right x front to back) : 4300 x 2100mm, Die connection capacity (1 pad 2 cylinders) : 160t, Die cushion stroke : 300mm, Main motor : 110 Kw. UNIT : 4, Capacity : 1000t, Stroke length : 700mm, Number of stroke : 8~15rpm, Die height : 1600mm, Slide adjustment : 700mm, Bolster dimension (left to right x front to back x thickness) : 3700 x 2250 x 300mm, Slide dimension (left to right x front to back) : 3700 x 1750mm, Die connection capacity (1 pad 2 cylinders) : 150t, Die cushion stroke : 300mm, Main motor : 132 Kw. UNIT : 5, Capacity : 1000t, Stroke length : 700mm, Number of stroke : 18rpm, Die height : 1700mm, Slide adjustment : 700mm, Bolster dimension (left to right x front to back x thickness) : 4300 x 2100 x 300mm, Slide dimension (left to right x front to back) : 4000 x 2100mm, Die connection capacity (1 pad 2 cylinders) : 160t, Die cushion stroke : 300mm, Main motor : 110 Kw.

Capacity : 400t, Load curve : 13mm, Die height : 1200mm, Stroke length : 500, Number of stroke : 20 spm, Slide Adjustment : 500mm, Slide lower surface dimension (left and right * front and back) : 2500 * 1500, Bolster size (left and right * front and back) : 2500 * 1500, Bolster thickness : 200mm, Cushion capacity : 90T, Cushion stroke : 250mm, Electric motor for adjustment : 7.5 kw 1501rpm.

Capacity : 400T,Stroke length : 500mm, Die height : 1400mm, Slide size (left and right * front and back) : 2500 * 1500mm, Bolster size : 1650 * 2000mm, Bolster thickness : 200mm, Slide adjustment : 500mm, SPM : 20spm, Top height (above floor) : 650mm, Running speed : 4.22mm, Loading capacity : 20 ton, Air pressure : 5.5 kg/cm^2.

TANDAM LINE PRESS : 500t, 500t, 800t, 500t, 800t , 5 units one line. UNIT 1 - MAKE : HITACHI, MODEL : 57-JA-7508, Capacity : 500T, Stroke length : 900mm, Die height : 2200mm, Slide size : 2800 * 1600mm, Slide Adjustment : 600mm, Stroke/min : 6.UNIT 2 - MAKE : KOMATSU, Capacity : 500t, Stroke length : 660mm, Die height : 1700mm, Slide adjustment : 700mm, Number of stroke :10mm, Slide size (left and right * front and back) : 4000 * 1750mm, Bolster size : 4180 * 2045mm, Bolster thickness : 236mm, Die cushion Capacity : 30t, Die cushion stroke : 450mm,Air pressure : 5 kg/cm ^2, Main motor : 75 hp 1000 rpm. UNIT 3 - MAKE : IHI, MODEL : S4-800-400-200,Capacity : 800T,Stroke length : 600mm, Die height : 1400mm, Slide size (left and right * front and back) : 4000 * 1750mm, Bolster size : 4180 * 2045mm, Slide adjustment : 600mm, SPM : 20spm, Die cushion capacity : 160ton, Air pressure : 5 kg/cm^2. UNIT 4 - MAKE : CLEARING, Capacity : 500T. UNIT 5 - MAKE : SUMITOMO, Capacity : 800t, Load curve : 13mm, Die height : 900mm, Stroke length : 400, Number of stroke : 16 spm, Slide Adjustment : 400mm, Slide lower surface dimension (left and right * front and back) : 2140 * 1520, Bolster size (left and right * front and back) : 2140 * 1520, Bolster thickness : 280mm, Cushion capacity : 90T, Cushion stroke : 200mm, Cushion cylinder 1 pad, 2 cylinder, Normal air pressure : 3.5 kg/m,Main motor : 55KW 1000rpm, Electric motor for adjustment : 7.5 kw 1500rpm.

TANDAM LINE PRESS : 1200t, 1200t, 800t, 800t , 4 units one line. UNIT 1 - Capacity : 1200T, Load curve : 13mm, Die height : 900mm, Stroke length : 400, Number of stroke : 16 spm, Slide Adjustment : 400mm, Slide lower surface dimension (left and right * front and back) : 2140 * 1520, Bolster size (left and right * front and back) : 2140 * 1520, Bolster thickness : 280mm, Cushion capacity : 100T, Cushion stroke : 200mm, Cushion cylinder 1 pad, 2 cylinder, Normal air pressure : 5.5kg/m,Main motor : 95KW 1000rpm, Electric motor for adjustment : 5 kw 1500rpm. UNIT 2 - Capacity : 1200T, Load curve : 13mm, Die height : 900mm, Stroke length : 400, Number of stroke : 16 spm, Slide Adjustment : 400mm, Slide lower surface dimension (left and right * front and back) : 2140 * 1520, Bolster size (left and right * front and back) : 2140 * 1520, Bolster thickness : 280mm, Cushion capacity : 100T, Cushion stroke : 200mm, Cushion cylinder 1 pad, 2 cylinder, Normal air pressure : 5.5kg/m,Main motor : 95KW 1000rpm, Electric motor for adjustment : 5 kw 1500rpm. UNIT 3 - MODEL : E2-800-2115, Capacity : 800t, Load curve : 13mm, Die height : 900mm, Stroke length : 400, Number of stroke : 16 spm, Slide Adjustment : 400mm, Slide lower surface dimension (left and right * front and back) : 2140 * 1520, Bolster size (left and right * front and back) : 2140 * 1520, Bolster thickness : 280mm, Cushion capacity : 90T, Cushion stroke : 200mm, Cushion cylinder 1 pad, 2 cylinder, Normal air pressure : 3.5 kg/m,Main motor : 55KW 1000rpm, Electric motor for adjustment : 7.5 kw 1500rpm. UNIT 4 - MODEL : E2-800-2115, Capacity : 800t, Load curve : 13mm, Die height : 900mm, Stroke length : 400, Number of stroke : 16 spm, Slide Adjustment : 400mm, Slide lower surface dimension (left and right * front and back) : 2140 * 1520, Bolster size (left and right * front and back) : 2140 * 1520, Bolster thickness : 280mm, Cushion capacity : 90T, Cushion stroke : 200mm, Cushion cylinder 1 pad, 2 cylinder, Normal air pressure : 3.5 kg/m,Main motor : 55KW 1000rpm, Electric motor for adjustment : 7.5 kw 1500rpm.

CAPACITY:1000T,STROKE:800,DIE HEIGHT:1000mm,ADJUSTMENT SLIDE:600mm,BL:2800X1300,SL:2800X1300

CAPACITY:800T,LOWER EVENING :580mm,ADJUSTMENT SLIDE:500mm,DIE HEIGHT:1400mm,BL:3000mmx1700,SL:1700mm

CAPACITY:500T, LOWER EVENING:650mm,ADJUSTMENT SLIDE:500mm,DIE HEIGHT:1400mm,BL:300X1700,SL:3000X1700

CAPACITY:500T, LOWER EVENING:650mm, ADJUSTMENT SLIDE: 500mm, DIE HEIGHT :1400mm, BL:3000X1700,SL:3000X1700

CAPACITY : 500T, SLIDE ADJUSTMENT:500mm, LOWER EVENING:650mm,DIE HEIGHT:1400mm,BL : 3000x1700, SL : 3000x1700.

Number of points 4 points ,Capacity 120t,Stroke length 600mm , SPM 8 ~ 18 , Die height 1320mm , Slide adjustment amount 200mm , Slide area 2500 × 1700mm ,Bolster area 2500 × 1700mm ,Bolster thickness 230mm (800t), 190mm ( 400t) Traction , motor 110kW (800t) 75kW (400t) ,Die cushion (800t only) ,Cushion stroke length 250mm Pad area 2050 x 1090mm.

Capacity 300t, (3 units) Stroke 620mm, Die height 1100mm, Stroke per Minute: 20 spm, Operational Stroke: 15 rpm, Bolster dimensions 2500 x 1520mm Slide Dimensions: 2500*1520mm Capacity 500t, (1 unit) Stroke 788mm Die height 1100mm Stroke per Minute : 20spm, Operational Stroke : 15rpm, Bolster dimensions : 2700 x 1700mm, Slide Dimensions : 2700 x 1700mm,

Capacity : 1500T Stroke : 900mm, Stroke per Minute : 18spm, Die Height : 1250mm, Slide Adjustment : 400mm, Slide Area : 3400*2000mm, Bolster Area : 3400*2000*300mm, From the floor height of the Bolster : 750mm The height of the bed above the floor : 10mm With Die Cushion Die Cushion capacity: 300T Stroke: 300mm, Bolster Area: 2930*1510mm 800T * 2 specification: Capacity : 800T, Model No. : E4S800 Year : 1974 Point Size : 4, Stroke : 750mm, Stroke per Minute : 15spm, Die Height : 1620mm, Slide Adjustment : 400mm, Slide Size : 3400*2000mm, Bolster Size : 3400*2000mm, Thickness of Bolster : 300mm, Main Motor Capacity : 95kw*4p 600T* 1Nos Specification : Capacity : 600T, Year : 1974, Model No. : E4S600 Point Size : 4, Stroke : 750mm, Stroke per Minute : 15spm, Die Height : 1620mm, Slide Adjustment : 400mm, Slide Size : 3400*2000mm, Bolster Size : 3400*2000mm, Thickness of Bolster : 300mm, Main Motor Capacity : 95kw*4p With Die Cushion Die Cushion capacity: 120T Stroke: 300mm, Bolster Area: 2930*1310mm

Tandem Line - SIMPAC, DE2P-1200t (1 Unit) , SANGYONG,DF2P-600t (1 Unit),DF2P-300t (2 Unit),1.SPEC DETAILS(SIMPAC, DE2P-1200, 1 Unit  ) - Capacity: 1200T, Stroke: 600 mm, SPM: 10-20, Die Height: 1200 mm,Slide Adjustment: 600 mm, Slide Area: 2800 mm * 1600 mm,   Bolster Area: 2800 mm * 1600 mm * 250 mm,  Main Motor: 135 * 4(D-C)  kw. With Die Cushion:- Capacity: 150 Ton, Stroke : 300 mm. 2.SPEC DETAILS(SANGYONG, DF2P-600, 1 Unit  ) - Capacity: 600T, Stroke: 600 mm, SPM: 10-20, Die Height: 1200 mm,Slide Adjustment: 600 mm, Slide Area: 2500 mm * 1600 mm,   Bolster Area: 2500 mm * 1600 mm * 250 mm,  Main Motor: 90 *DC  kw. With Die Cushion:- Capacity: 100 Ton, Stroke : 250 mm. 3.SPEC DETAILS(SANGYONG, DF2P-300, 2 Unit  ) - Capacity: 300T, Stroke: 600 mm, SPM: 10-20, Die Height: 1200 mm,Slide Adjustment: 600 mm, Slide Area: 2500 mm * 1600 mm,   Bolster Area: 2500 mm * 1600 mm * 220 mm,  Main Motor: 75 *4 DC  kw. With Die Cushion:- Capacity: 40* 2=80 Ton, Stroke : 250 mm.

Tandem Line - E4S600-MB(1 Unit) & E4S400-MBC(3 Unit), SPEC DETAILS(E4S600-MB) - Capacity: 600 T, Stroke: 750 mm, SPM: 14 & 21, Die Height: 1620 mm, Bolster Area: 3400 mm * 2000 mm * 300 mm, Slide Area: 3400 mm * 2000 mm, Slide Adjustment: 400 mm, Main Motor: 95/63 kw. With Die Cushion:- Capacity: 120 Ton, Stroke: 300 mm. SPEC DETAILS(E4S400-MBC) - (3 Unit) - Capacity: 400 T, Stroke: 500 mm, SPM: 20 & 13.5, Die Height: 1420 mm, Bolster Area: 2500 mm * 1700 mm * 230 mm, Slide Area: 2500 mm * 1700 mm, Slide Adjustment: 500 mm, Main Motor: 55/37 kw. With Die Cushion:- Capacity: 80 Ton, Stroke: 250 mm.

Tandem Line - E2Q-500(1 Unit) & E2P-300(3 Unit), YOM: 1991, SPEC DETAILS(E2Q-500) - Capacity: 500 T, Stroke: 710 mm, SPM: 12 ~ 22, Die Height: 1000 mm, Bolster Area: 2500 mm * 1700 mm * 200 mm, Slide Area: 2500 mm * 1600 mm, Slide Adjustment: 400 mm, Main Motor: 75 kw. SPEC DETAILS(E2P-300) - Capacity: 300 T, Stroke: 450 mm, SPM: 15 ~ 25, Die Height: 840 mm, Bolster Area: 2500 mm * 1500 mm * 180 mm, Slide Area: 2500 mm * 1500 mm, Slide Adjustment: 350 mm, Main Motor: 37 kw.

Capacity : 400t, Number of strokes : 15~30spm, Stroke length : 330mm, Die height : 625mm, Slide adjustment : 100mm, Slide dimension (left and right x front and back) : 3000 x1100mm, Bolster dimension (left and right x front and back) : 3000 x 1100mm, Emergency stop time : 240ms, allowable upper mold mass : 6000kg.

Capacity : 300t, Stroke length : 350mm, Number of stroke : 20-40spm, Slide adjustment : 100mm, Die Height : 750mm, 10 steps, Slide dimension (left to right x front to back) : 3000 x 1000mm, Bolster dimension (left to right x front to back) : 3000 x 1000mm, with diction.

Capacity : 500mm, Number of stroke : 15-30spm, Slide adjustument : 100mm, Die Height : 800mm, Stroke length : 350mm.

Capacity :1200t, Stroke length : 710mm, Number of stroke : 8~23 spm, Die height : 1350mm, Slide adjustment : 750mm.

Capacity : 500t,

CAPACITY : 500t, Stroke length : 260mm, Number of strokes : 15-35spm, Die height : 700mm, Bolster dimension (left to right x front to back) : 2.500mm X 1.100mm, TRANSFER STAGES: 8mm. "LEVELER FEEDER", MODEL: NCLF-350-60, YEAR: 1981, THICKNESS: t1.0mm - t6.0mm.

Capacity : 160ton, Number of strokes : 22-44spm , Stroke length : 200mm, Die height : 500mm, Slide adjustment length : 130mm, Slide dimensions (left to right x front to back) : 1650 x 500mm, Bolster dimensions (left to right x front to back) : 1650 x 600mm, Emergency stop time : 152ms, Maximum Stop time: 167ms, Overrun detection position: 15 degrees, Main motor: 22kW 4P.

Capacity: 1500t, Stroke length : 750mm, Number of stroks : 10~27spm, Die height: 1000mm, Slide adjustment : 100mm, Slide dimensions(left to right x front to back) : 4500×2100mm, Bolster dimensions(left to right x front to back) : 4700×2100mm, Main motor: 220kW, Emergency stop time : 420ms.

Stroke length: 360mm, SPM:20~30, Die height :700mm, slide amount :100mm, main motor: 45KW, bolster Dimensions:3000*1000

CAPACITY: 300T, SPM: 30~60,STROKE LENGTH: 200, DIE HEIGHT: 500, SLIDE ADJUSTMENT: 200, BOLSTER SIZE: 2500*1500, SLIDE SIZE: 2500*1400

capacity: 500ton,stroke length: 450mm, die height: 900mm,number of stages:12, stroke per minute:2.(15~30)3.(15~25), maximum drawing depth:2.(160)3.(120), slide adjustment: 100mm,slide area: 3600x1400mm, bolster area: 3600x1400mm, motar: 75KW

Capacity : 300T, Stroke : 350, spm: 20-40, Die Height: 750 10 steps, Bolster size: 3000 * 1000 With diction

CAPACITY:5000T

Capacity : 1000T Stroke : 10~25spm Stroke Length : 600mm Die Height : 1000mm Slide Adjustment : 120mm Slide Area : 5450*1600mm Bolster Area : 5450*1600mm Lift Stroke : 100mm Clamp Stroke : 200mm Working Process : 6~8 Point Size : 4 With Die Cushion 40.20.10*4 Ton Stroke : 180mm Bolster Area : 450*800mm

CAPACITY : 1500T, Stroke distance : 600mm, Number of strokes : 10~25, Die height : 1100mm, Bolster area : 4200 * 2000, Number of stroke : 6, Maximum drawing depth : 200mm, Maximum blank size : 600*1400mm, Feed stroke : 700mm, Plate thickness : 0.6~32mm.

Capacity: 300Ton, Stroke length: 300 mm, Stroke (2D, 3D) - 20 - 40 Spm, 20-32 spm, Die height:530 mm, Slide adjustment: 100 mm, Slide area: 2500*1000, Bolster area: 2500*1000*200 Die Cushion Specification: - Capacity * Stroke Length * Units - 1.6 T*70 mm*1 units 1.2 T* 70 mm* 4 units/ Knockout - 5 station installation Transfer device Specification:- 3 dimension transfer, Clamp stroke : 95 mm, Feed Pitch: 150 mm, Lift Stroke: 35 mm, Feed bar internal width Min-Max- 370 - 540 mm

Capacity: 500T, Stroke : 450mm, Slide Adjustment: 80mm, Strokes Per Minutes : 20-30spm, Die Height : 800mm, Slide Area: 3580 * 1250mm, Bolster Area : 3580 * 1250mm, Main Motor (kw): 90. With Coil Feeder Coil Width: 100 ~ 600mm, Coil Thickness: 0.5 ~ 4.5mm, Coil Length: 25 ~ 350mm, Coil Speed: 20 ~ 30spm

Capacity : 250T, Y.O.M :1980, Stroke (mm) :400, Slide Adjustment (mm) :100, Strokes Per Minutes (min) :15-30 , Die Height (mm) :700, Slide Area (mm) :3000*600, Bolster Area (mm) :3000*900, Main Motor (kw) :37. WITH TRIMMING PRESS : 80T

Capacity: 450 Ton, Stroke:340 mm, Stroke Per Minutes: 20 - 40, Die Height: 780 mm, Bolster Area: 2600 mm * 670 mm, Main Motor: 45 KW

capacity: 300ton,stroke length: 350mm, die height: 700mm,number of stages:10, stroke per minute:2.(20-40)3.(20-30), maximum drawing depth:2.(120)3.(180), slide adjustment: 100mm,slide area: 3000x1000mm, bolster area: 3000x1000mm

Pressure capacity : 200 KN, Stroke length : 30mm, SPM : 100~400mm, Die height : 240mm, Bolster : 650*285*130mm, Bed opening : 390*85mm, Motor : 2.2kW.

Capacity : 650ton, Stroke : 30 to 100mm, during operation, maximum slide stroke : 200mm, V-ring maximum stroke : 40mm, Pressure speed : 3~40t, Approach speed: 10~180mm, Maximum stroke number : 40spm, Bolster size(left and ringth x front and back) : 1150x1050mm, Feeding device Plate, thickness : 0.5 to 16mm, Plate width : 40~320mm, Scruff° cutter : 40ton.

Capacity : 500T , MAX.stroke : 280 , pressure : 236 kg/cm2 , open height : 600mm , shut height : 80mm

Capacity : 630T, Total Force : 4000~6000kN, Shear Force : 1800~5850kN, Ring Indenter Force : 320~3200kN, Counter Force : 160~1600kN, Safety Distance : 173mm, Ram Slowing Down Path Max : 12mm, Ram Closing Speed : 120mm/s

Capacity: 500T, Stroke: 180 mm, Daylight: 500 mm, Max descending speed: 180 mm/sec, Motor: 75 kW 6P

Capacity : 800T, Stroke(mm) : 280 FEEDER SPEC: MAKER:DAEBONG, YOM :2010, Coil Width : 50-450mm, Coil Thickness :10t, Coil Weight :5000kg, Coil out-dia :1800mm, Coil in-dia :508mm, Feed length: DIGITAL SETTING, Main motor: 7kw, Mandrel expansion : EXPANSION, Pneumatic pressure : 5kg/㎠, Hydraulic pressure : 100kg/㎠（MAX）, Power source : 440V 　3-PHASE

Technical specs pressure: 630T, plate thickness: 16 mm, SLIDE: total force (nominal): 630, stroke min.: 30 mm , stroke: 150 mm, cutting velocity min.: 3 (mm/s), cutting velocity max.: 50 (mm/s), closing velocity: 120 (mm/s), returning velocity: 135 (mm/s), V-RING: nominal force: 320, stroke: 40 mm, COUNTER RAM: nominal force: 160, stroke: 40 mm, TOOL DIMENSIONS: lower table - width: 910 mm, lower table - depth: 1350 mm, upper table - width: 900 mm, upper table - depth: 900 mm, daylight max.: 410 mm, STRIP-FEEDER: feeder type: roll feeder: nominal force: 6000 kN, sheet width max: 450 mm, sheet thickness max: 16 mm, feeding step min.: 1 mm

Capacity : 200T, Stroke Length : 30mm, Number of stroke : 100-300spm, Die height : 560mm, Slide adjustment : 50mm, Slide dimensions (left to right x front to back) : 1700 x 650mm, Bolster dimensions (left to right x front to back) :1700 x 950mm, (square hole) with VS.

Capacity : 125T, Stroke Length : 31.75mm, Number of stroke : 0-700spm, Shut height : 508mm, Slide adjustment : 51mm, Bolster dimensions (left to right x front to back) :1219 x 819mm, Clutch Air Pressure for rated tonnage in pounds : 60.

Capacity : 200T, Stroke Length : 30mm, Number of stroke : 140-350spm, Die height : 440mm, Slide adjustment : 50mm, Slide dimensions (left to right x front to back) : 1700 x 650mm, Bolster dimensions (left to right x front to back) :1700 x 950mm, (square hole) with VS.

Capacity : 100T, Stroke Length : 80mm, Number of stroke : 0-100spm, Die height : 370mm, Slide Adjustment : 50mm, Slide Area:(left to right) : 1140 X 500mm, Bolster dimensions (left to right x front to back) : 1450 X600 X 115mm, Bed opening (front to back) : 750 x 250mm, Main Motor : 22kW 4P.

Capacity : 200T,Stroke Length : 200mm, Number of stroke : 40~160spm, Die height : 320mm, Slide Adjustment : 35mm, Bolster dimension (left to right) : 1810mm, Slide opening (front to back) : 170mm, Main Motor : 60hp.

CAPACITY : 200T,STROKE LENGTH : 200mm, NUMBER OF STROKE : 48~100spm, SLIDE ADJUSTMENT :100mm, SLIDE DIMENSION (LEFT to RIGHT,FRONT to BACK) : 1500*1100mm, BOLSTER DIMENSION (LEFT to RIGHT,FRONT to BACK) : 1500*900mm,DIE HEIGHT : 450mm, MAIN MOTOR : 50kw.NC LEVELER FEED , MAXIMUM FEED LENGTH : 500mm, ROLL LENGTH :420mm, COIL THICKNESS : 0.6~6.0mm, MAXIMUM COIL WIDTH : 400mm, MAXIMUM COIL OUTER DIA : 1500mm, SPINDLE MOTOR CAPACITY : 1.5KW, COIL WEIGHT MAX : 3000kg.

CAPACITY : 60T,Stroke of slide : 40MM,SPM : 180~380MM,Die height : 320MM,Adjustment of slide : 50MM,Slide area : 320*360MM,Bolster : 1080*470*145MM,Bed opening : 600*180MM,Stopping time : 260MS.

Capa : 1100KN .Stroke : 80mm .spm : 40 - 150 .Die height : 350mm .Slide : 1200 x 520mm .Bolster : 1200 x 550mm

Capacity : 80t, Stroke length : 25mm, Number of stroke : 600spm, Die Height : 245mm , Slide Adjustment : 50mm, Bolster size (L-R x F-B)L: 740 * 1050mm, Slide area (L-R x F-B) : 500 * 1050mm, Main Motor: 22kw.

Capacity : 80t, Stroke length : 25mm, Number of stroke : 600spm, Die Height : 245mm, Slide Adjustment : 50mm, Bolster size (L-R x F-B)L: 740 * 1050mm, Slide area (L-R x F-B) : 500 * 1050mm, Main Motor: 22kw.

Capacity : 125T, Stroke : 30, Spm : 120 ~ 300 spm , Die Height : 360 , Bolster : 1100 * 800

Capacity : 150T, Stroke : 250 , Spm : 50-120 spm , Die Height : 500 Bolster : 2000 * 800

CAPACITY :30T, STROKE : 30 SPM: 150-600spm ,DIE HEIGHT : 250, BLOSTER SIZE: 500 * 400 Oilmatic Feeder Sankyo VG25

CAPACITY : 40T, STROKE : 25, SPM :200-1000, DIE HEIGHT : 230, BLOSTER : 750 * 540 Feeder: VG25

Capacity : 30T, Stroke : 15, spm : 200-1600spm, Die Height: 230, slide Adjustment: 50

Capacity : 30T ,Stroke : 15, spm : 200-1000, slide Adjustment: 50, With feeder Vario VG25 ,With soundproof BOX

capacity : 30T 　　Crank motion 2 point press 〇 Ability 　　Pressurized pressure 300KN Capacity generation position 1.6mm 〇 Stroke 　　Stroke length 20mm 　　Number of strokes 200-1000 spm (no load continuous) 〇 Work load 　　Continuous work is 300J at 200spm or more 　　Micro inching about 60 spm 〇 Interference distance 　　Die height 230mm 　　Slide adjustment amount 50 mm 　　Floor bolster top surface height 1020 mm 〇Slide and bolsda 　　Slide surface dimensions 550 mm x 320 mm 　　Bolster surface dimensions 550 mm x 450 mm 　　Bolster thickness 100 mm 　　Maximum upper type suspension mass 80 kg 〇 Motor 　　Main motor 11kw (inverter) 〇 Machine mass 　　Gross weight 6t 〇Auxiliary feeder specifications 　　Model VG20M (manufactured by Sankyo Seisakusho) Model gripper feeder 　　Material plate width 7mm-40mm Material plate thickness 0mm-0.7mm 　　Feed length range 0 mm to 21 mm Feed line height 80 mm ± 20 mm above the bolster 　　Feed angle 165 ° (at crank angle 277.5 ° to 82.5 °) 　　Feed direction left to right

Capacity : 110T Stroke : 80mm SPM : 60 ~180spm Slide Adjustment: 30, Slide : 1200*520 Die Height : 310, Bolster Size : 1200 * 500 ,SL Size : 1200 * 520 With Utani roll feeder, leveler and soundproof box.

Capacity : 300T, Stroke length : 30mm, SPM : 130~300 spm, DH : 420mm, ADJ : 80mm, Bolstor :1700*900, Slide : 1550*700, SLIDE ADJUSTMENT LENGHT : 80mm, Motor : 30Kw.

Capacity: 25T, Stroke: 32mm, Stroke per Minute: 950mm, Stroke length: 51mm, Die Height: 229.5mm, Bolster Size: 530*530mm, Slide Size: 438*360mm Motor: 22kW

Capacity : 300T, Stroke length : 30mm, SPM : 120~300 spm, DH : 420mm, ADJ : 80mm, Bolstor :1500*900, Slide : 1350*700, Motor : 75Kw, Attachment : Feeder : BBV-320/200, Max material width : 150~200mm, Feed length : 2.5-120mm, Materialthickness : 3~6mm, with UTAC UNCOIL LINE SYSTEMS

Capacity : 60T, Stroke : 40mm, Stroke per Minute : 150-725spm, Die Height : 330mm, Bolster Area : 800*650*95mm, Slide Area : 800*420mm, Slide Adjustment : 50mm, Main motor: 22 kw Bed opening: 600*130

Capacity : 60t, Stroke :60mm, Stroke per Minute : 80～300spm, Die Height : 27mm, With feeder

Capacity : 60T, Stroke per Minute: 100-800 rpm Slide Adj:80 Slide Area : 620*620 Bolster Area :740*458 Motor: 18.5kw Accessories : BBV202/120 Maximum material width: -200 Feed length: 2.5-120 Plate thickness: 0.2-2.5

Capacity : 50T, Stroke : 16-51mm, Stroke per Minute : ~1120spm Die Height : 346.5~364mm, Slide Adj:64mm, Slide Area : 810*420mm, Bolster Area :940*650mm, Main Motor : 30kw VS No.11051-1122 Accessories : Feeder BBV202/120

Capacity : 40T, Stroke :25mm, Stroke per Minute : 200-1000spm, Die Height :250mm, Slide Adj:50mm, Bolster area :750*540mm, Slide Area :700*360mm, Main Motor : 18.5kw Accessories : BBV101/120, Width : 10-100, Length : 0-75, Thickness : 0.2-2

Capacity : 200T, Stroke Per Minute : 300mm, Stroke : 38mm, Slide Adjustment : 76mm, Die Height : 558mm, Bolster Area : 1371*1117mm

Capacity : 40T Stroke: 25 Stroke per Minute: 200-1000spm Die Height: 310mm Slide Adjustment: 50 Slide Area: 700*430 Bolster Area: 750*540 (square hole) With VS

Capacity : 80T, Stroke length :30mm, SPM :200-800 spm, DH :255mm, ADJ :40mm, Bolstor :1100 / 700 Slide : 1100 / 450 Motor : 30Kw, Net weight :16t Oil cooling device OILMATIC Attachment : Feeder BBV202/120 Max material width :10-100mm Feed length : 2.5-120mm Materialthickness : 0.2-2.2mm Machine hight : 3285mm

Capacity : 100T Stroke : 25mm SPM : 80-320spm Slide Adjustment: 50, Die Height : 300, Bolster Size : 550 * 500 ,SL Size : 550 * 450

CAPACITY : 125T, Stroke length :25mm, SPM :100-600 spm, DH :320mm, ADJ :50mm, Bolstor :1100 / 500 Slide : 1100 / 450 Motor : 30Kw, Net weight :22.2t Oil cooling device OILMATIC Attachment : Feeder RG2012 (BBV202/120) Max material width :10-200mm Feed length : 2.5-120mm Materialthickness : 0.2-2.2mm Machine hight : 3760mm

Capacity : 80T , Stroke length : 50mm , Spm: 160~430spm , Slide Area (left and right*around) : 1100*450mm , Bolster area(left and right* front and back): 1100*700mm , Die height : 250mm , Slide Adjustment Length ; 40mm , motor : 22kw

Capacity : 200T, Stroke: 30 mm, Stroke per minute: 120-300 spm, Die Height: 380 mm, Slide Adj: 60 mm, Bolster size: 1500*850 mm

Capacity: 125 Ton, stroke: 30 mm, SPM: 160-400, Die height: 340 mm

Capacity : 200t, Bolster Size : 2,000 × 1,500mm, Day Lights : 1550mm, Stroke : 1600mm, Emergency stop time : 110ms, Tank capacity : 800L, Main motor : 22kw.

Capacity : 1200T, Bolster Area : 4500*2500mm,

Capacity : 300T, Pull Up capacity ; 75T, Bolster Area : 3000*2000mm, Open Height : 2500mm, Slide Stroke : 2500mm, Main Cylinder : Crown Attachment Type Inner Diameter * Rod Diameter : 300*270mm, Bolster Moving device : Bolster Loading Capacity : 30T Bolster Stroke : 4000mm, Bolster Type : Moving Type 1st Stage : Inner Diameter *Rod Diameter : ø90*ø75mm, 2nd Stage : Inner Diameter*Rod Diameter : ø65*ø38mm

Capacity: 100 Ton, Pull up Capacity: 60 Ton, Table Dimension: 1600 mm * 1700 mm, Day Light: 1500 mm, Stroke: 1000 mm, Table Stroke: 1300 mm, Max.Loading Capacity: 8 Ton, Bottom Plate Sliding Type: Moving Bolster, Top Plate Tilting Type: 110� Tilting Type

Coil Width : 50-600mm, Coil Thickness : 0.5-2.3mm, Width x Thickness : 150 x 4.5mm, Coil weight : 3000kg, Coil outer dia : 1400mm, Coil inner dia : 508mm, Power supply voltage : 200C,Air pressure: 0.5MPa.

Coil Width : 30-300mm, Coil Thickness : 0.3-3.2mm, Coil weight : 1500kg, Power supply 3-phase : 200V 50Hz.

MAX plate width : 50~400mm, MAX plate thickness : 0.6~6.0t, Inner dia : 508mm, Outer dia : 1500mm, Motor for uncoiler : 3.7kw, Air pressure : 0.5MPa.

Board width : 33-400mm, Plate thickness : 0.6-9.0mm, Coil outer diameter : φ1400mm, Coil inner diameter : φ610mm, Coil weight : 2000kg.

Coil Width : 50-600mm, Coil Thickness : 0.3-4.5mm, Weight : 3000kg.

Coil Width : 50-400mm, Coil Thickness : 0.3-4.5mm, Coil weight : 3000kg, Speed ​​: 20m/min.

Manufacture Supply Power : 3-phase 220V 60Hz28.2KVA,Mechanical quality : 2300KG,Width : 70~600mm,Plate thickness : 1.0~6.0mm,Maximum line speed : 22m/min,Maximum coil : 3000kg,mass Top speed : 1.319m/sec.

Capacity : 3.2t*400w,Coil outer diameter : ? - ?1200mm,coil inner diameter : ?400. 508mm, coil weight : 500 kgf, uncoiler : 0.8*4 KwXP, electric leveler : 2.8*4 KwXP.

Coil width: 70-1300mm, Plate thickness: 0.6 to 6.0mm, Coil maximum weight: 7000kgf, Maximum line speed: 22m/min, Feed direction: Right >> Left.

Sheet thickness : 0.6-3.2mm, Sheet width : 150-600mm, Coil diameter (OD x ID) : 1200 x 508mm, Feeder line speed : 18m / min.

Board width 50-400 mm Plate thickness 0.3-4.5 mm?? Attached double anchorer Feed direction Right ? Left Machine number 00HF20061

Maximum plate thickness 7 mm Maximum plate width 800mm Combination of plate thickness and plate width 8mmx200 Actual value

Board width: 80-400 Board thickness: 0.6-6.0 Coil weight: 3,000 kg

Width 70-400mm Thickness 0,6-6t Weight 3000kg Speed ??13m / min Left ? right Servo updated roll parts OH

WIDTH: 300mm,MAXIMUM THICKNESS: 3.2mm

WIDTH:420mm, THICKNESS: 0.3mm-3.2mm

Board width 70-600mm, board thickness 0.6-6.0mm Feed rate 18m / min Maximum coil weight 3000kg Left-Right Machine weight 2.3t

Coil Width: 800mm , Coil Thickness: 6 ~ 7 mm.

Board width 50-400 mm Plate thickness 0.3-4.5 mm　　 Attached double encoiler Feed direction Right → Left Machine number 00HF20061

Material width 400m, Plate thickness 0.3-4.5mm

Coil Width: 60 - 400 mm Coil Thickness: 0.4 - 3.2 mm Coil ID: 508 mm Coil OD: 800 - 1200 mm Main motor: 3 kW Air pressure: 5 kgf/ sq. cm

N/A

Coil Feeder Plate Width : 50~400mm, Plate Thickness : 0.3~4.5mm

Coil Feeder Plate Width : 70~800mm, Plate Thickness : 0.3~4.5mm

Plate Width: 50~300mm, Plate Thickness : 0.5~3.2mm Max Coil Weight : 2 T Coil Outer Diameter : 1200mm, Inner Diameter : 508mm, Max Quntity Feed : 400mm Thickness * Width : 3.2*130mm

Plate Width : 300mm Plate Thickness : 0.3~2.3mm Max Outer Dia : 1200mm, Machine Weight : 1 Ton

Model No. FG4-40 Year : 1989 Board width: 80-400mm Thickness: 0.6-6.0mm　　　　　　　 Straightening ability: 6t * 200w, 4.5t * 350w　　　　　　　　　　　 Coil weight 3000kg

Coil Width: 50 ~ 610 mm, Coil Thickness: 0.4 ~ 3.2 mm, Coil Speed: 55 SPM, Main Power: 1.8 KW.

Length: 50 mm ~ 1000 mm, Thickness: 0.6 mm ~ 4.0 mm, Feeding Speed: 20 m/min

Capacity : 110t, Stroke length : 200mm, Number of stroke : 70spm, Die height : 390mm, Slide adjustment : 100mm, Slide dimension(left and right x front and back) : 600 x 500mm, Bolster dimension(left and right x front and back) : 1100 x 700mm, Bolster thickness : 150mm, Servo motor : 30kw.

Capacity : 45t, Stroke length : 120mm, Number of strokes : 80 spm, Die height : 270mm, Slide adjustment : 60mm, Slide dimensions (left to right x front to back) : 410 X 340mm, Bolster dimensions (left to right x front to back) : 810 X 440mm, Main motor : 3.7kW, Emergency stop time : 151 ms.

Capacity : 110t, Stroke length : 180mm, Number of strokes : 35-65 spm, Die height : 350mm, Slide adjustment : 90mm, Slide dimensions (left to right x front to back) : 600 X 520mm, Bolster dimensions (left to right x front to back) : 1080 X 680mm, Main motor : 7.5kW, Emergency stop time : 217 ms.

Capacity : 200t, Stroke length : 250mm, Number of strokes : 25-45 spm, Die height : 450mm, Slide adjustment : 120mm, Slide dimensions (left to right x front to back) : 880 X 650mm, Bolster dimensions (left to right x front to back x thickness) : 1450 X 840mm X 190mm, Emergency stop time : 200ms, Main motor : 15kW. LEVELER FEEDER - Coil : 300mm, Weight : 2000 kg, Motor for uncoiler : 1.5 kw.

Capacity: 110t Stroke: 110mm, Stroke per Minute : 100spm Die Height: 350mm, Slide Adjustment: 100mm, Slide Size: 620 * 530mm, Bolster Size: 1100 * 680 * 150mm

Capacity: 110t Stroke: 150mm, Stroke per Minute: 65spm Die Height: 350mm, Slide Adjustment: 100mm, Slide Size: 620 * 530mm, Bolster Size: 1100 * 680 * 150mm, Shank hole diameter: φ31

Pressure capacity : 2000KN, Stroke length : 250mm, No-load continuous stroke : 40spm, Die height : 460mm, Slide adjustment amount : 110mm, Slide dimensions (Left to right x front to back) : 1850×800mm, Bolster dimensions (Left to right x front to back) : 2150×840mm, Supply air pressure : 0.5MPa, Maximum suspended mass of upper mold : 1030kg, Sudden stop time : 160ms, Maximum stop time　Two-handed operation　ms - Light beam type : 180ms, Overrun monitoring position : 15°.

Capacity :150T,Stroke: 200,Number of strokes: 30~50,Die height: 450, Slide dimensions (left to right x front to back):1600X550mm, Bolster dimensions (left to right x front to back x thickness) :2000X760X140mm.

Pressure capacity: 110T,Stroke length: 180mm,Stroke number: 35-65spm,Die height: 400mm,Bolster:1880X680,Slide Surface: 1360X520.

Pressure capacity: 110T,Stroke length: 120mm,Stroke number: 35-65spm,Die height: 430mm,Slide adjustment amount: 90mm,Main motor: 11kW.

Capacity :160T,Stroke number: 30-55spm,Main motor :15kW,Air pressure used: 5 kgf, Sudden stop time :185ms,Maximum stop time Two-handed operation :185ms,Light beam type :205 ms, Overrun monitoring device setting position :12±3.

Capacity : 250T (Double crank) , Stroke length : 250mm , spm : 20~35spm , Die height : 500mm , Slide Adjustment : 120mm , Slide dimensions (left to right x front to back) :2700 X 700mm, Bolster dimensions (left to right x front to back) : 2700 x 760mm, Main Motor : 30kW.

Capacity : 250T (Double crank) , Stroke length : 170mm , spm : 25~60spm , Die height : 450mm , Slide Adjustment : 120mm , Slide dimensions (left to right x front to back) :2100 X 700mm, Bolster dimensions (left to right x front to back) : 2400 x 920mm, Main Motor : 30kW.

Capacity : 250T (Double crank) , Stroke length : 250mm , spm : 20~30spm , Die height : 525mm , Slide metering: 120mm , Slide dimensions (left to right x front to back) :2100 X 700mm, Bolster dimensions (left to right x front to back) : 2700 x 920mm, Main Motor : 30kW.

Capacity : 200T (Double crank) , Stroke length : 250mm , spm : 25~45spm , Die height : 500mm , Slide adjustment : 110mm , Main Motor : 22kW.

Capacity : 250T (Double crank) , Stroke length : 250mm , spm : 20~35spm , Die height : 525mm , Slide adjustment : 120mm , Main Motor : 30kW.

Capacity : 200T (Double crank) , Stroke length : 250mm , spm : 25~45spm , Die height : 500mm , Slide adjustment : 110mm , Motor : 22kw , with coil feeder

Capacity: 200t, Number of Stroke : 40-75spm, Stroke length: 150mm, Die Height : 450mm, Slide adjustment : 110mm, Slide dimension (left to right x front to back) : 1850*650mm, Bolster dimension (left to right x front to back) : 2400*700mm, Main motor: 15kw.

Capacity : 200t, Stroke length : 250mm, Number of strokes : 30-50 spm, Die height : 500mm, Slide adjustment : 120mm, Slide dimensions (left to right x front to back) : 1850×650mm, Bolster dimensions (left to right x front to back) : 2400×850mm.

Capacity: 250t, Stroke length : 280mm, Number of stroke : 20-35spm, Die height: 550mm, Slide adjustment : 120mm, Slide dimension (left to right x front to back) : 2100 x 700mm, Bolster dimension (left to right x front to back) : 2700 x 920mm, Main motor: 30kW.

Capacity : 2000kN,Tonnage Rating Point : 7mm,Stroke Length : 250mm,Continuous SPM (No Load) : 25 ~ 45spm,Die Height : 500mm,Slide Adjustment Range : 110mm,Slide Area (L.R. x F.B.) : 1850 x 650mm,Bolster Area (L.R. x F.B.) : 2420 x 840mm,Frame C Frame (b4 x h3) : 430 x 800mm,Frame Inner Dimension (a4) : 1926mm,Bolster Thickness : 170mm,Anchor Bolt Locations (a1 x b1) : 2080 (1980) x 1770mm,Installation Area (a2 x b2) : 2256 x 2225mm,Maximum Dimension(a3 x b3) : 2885 x 2340mm,Overall Height (h1) : 3725mm,Bolster Surface Height (h2) : 1000mm,Main Motor : 22 x 4kW x P,Main Breaker Capacity (380/415V, 50/60Hz) : 75A,Maximum Upper Die Weight : 1200kg,Approximate Press Weight : 27t,Required Air Pressure : 0.5MPa.

ST Length: 280mm ST Number: 20~35spm Die height: 550mm Slide adjustment: 120mm (electric)

Capacity : 250t, Stroke length : 300mm, Number of stroke : 15-30 spm, Die height : 550mm, Slide adjustment : 120mm, Slide dimension (left to right x front to back) : 2100 x 700mm, Bolster dimension (left to right x front to bacl x thickness) : 2700 x 950 x 190mm, Emergency stop time : 192ms.

S: 250 25-45spm DH: 500 Adj: 110 SL: 1850*650 B: 2420*850 (pin hole)

W crank press S: 250 25-45 spm DH: 500 Adj: 110 SL: 1850*650 B: 2620*840

Capacity : 250T, Stroke : 250m, SPM : 40, Die Height: 550, Slide Adjustment: 120, Bolster Area: 2700 * 950mm, Slide Area: 2100*700mm

Capacity: 250 T, Stroke: 280 mm, Strokes Per Minutes: 20 - 35, Slide Adjustment: 120 mm, Die Height: 550 mm, Bolster Area: 2700 mm * 920 mm, Slide Area: 2100 mm * 700 mm, with Die Cushion

Capacity: 250 T, Stroke: 280 mm, Strokes Per Minutes: 20 - 35, Slide Adjustment: 120 mm, Die Height: 550 mm, Bolster Area: 2700 mm * 920 mm, Slide Area: 2100 mm * 700 mm

Capacity: 250 T, Stroke: 280 mm, Strokes Per Minutes: 20 - 35, Slide Adjustment: 120 mm, Die Height: 550 mm, Bolster Area: 2700 mm * 920 mm, Slide Area: 2100 mm * 700 mm

Capacity : 200T, Stroke : 250mm, Stroke per Minute : 20~42mm, Slide Adjustment : 110mm, Die Height :500mm, Slide Area : 1850*650mm, Bolster Area : 2420*840mm Motor : 22Kw,

Capacity : 200T (Double crank) , Stroke length : 280mm , spm : 25~45spm , Die height : 485mm , Slide adjustment : 80mm , Motor : 22kw , with coil feeder

Capacity: 160T (Double Crank) Stroke: 130mm, Stroke per Minute: 45~80spm, Die Height: 400mm, Slide Adjustment: 100mm, Slide Area: 1500*580mm, Bolster Area: 2040*600mm

Capacity : 200T, Stroke : 300mm, Stroke per Minute : 20~35mm, Slide Adjustment : 110mm, Die Height :600mm, Slide Area : 1850*650mm, Bolster Area : 2770*840mm Motor : 22Kw

Capacity : 200T (Double Crank), Stroke : 250mm, Stroke per Minute : 25~45spm, Die Height : 445mm, Slide Adjustment : 110mm, Slide Area : 2100*650mm, Bolster Area : 2400*850mm

Capacity : 250T, Stroke : 300mm, SPM : 15-30, Die Height: 600, Slide Adjustment: 120, Bolster Area: 2700 * 950mm, With Amada leveler feeder (Model: LFD-400V 2005)

Capacity: 200T, Stroke Length : 250mm, Stroke No : 25-45SPM, Die Height: 500mm, Slide Adj: 110mm, Bolster size:2400 x 850mm, Slide size: (1850 x 550)mm

Capacity: 200T, Stroke Length : 150mm, Stroke No : 40-75 SPM, Die Height: 450mm, Slide Adj: 110mm, Bolster size: 2400 x 700mm, Slide size: 1850 x 650mm

Capacity (ton) :250, Y.O.M :1996, Stroke (mm) :250, Slide Adjustment (mm) :120, Strokes Per Minutes (min) :20-40 , Die Height (mm) :550, Bolster Area (mm) :2700*950, Main Motor (kw) :22

Capacity: 200 Ton, Stroke length: 250 mm, Number of stroke: 20-40 spm, Bolster size: 2400*800 mm, Slide size: 1830*650 mm, Distance between slide and bolster: 500 mm, Slide adjustment: 105 mm, Main motor: 15 kW, Air pressure - Clutch brake: 5 kg/sq.cm, Air pressure - Air line: 5 kg/sq.cm

Cap:250T,stroke length:250mm,speed:30-50spm,slide area:2700x950mm,bolster area:2800x950mm,die height:540mm,slide adjustment:110mm,thickness of bolster:200mm,main motor:22KW,Die cushion:4.7T

Capacity:250ton, lenght of stroke:170mm, Stroke per minute: 25-55, die height:550mm, length of slide adjustment:120mm, slide area:2100x700mm, bolster area:2700x760mm, main motor:30kw,air presure:5kgf/cm2,maximum up capacity:255kgf, immediate stop time:255ms,maximum stop manual:255ms,time beam system:275ms,over run monitoring system installation place 12degree+_3degree,with feeder and leveler, Feeder width: 600mm, thickness:0.3-6mm

TECH CAPACITY : 160T

Capacity:160 ton, Length of the stroke:230mm,Stroke per minute:30-46spm ,Die Height:435mm, Slide adjustment:100mm, Die cushion, Transfer feeder: Aida,CTV-3

TECH CAPACITY : 160T

Capacity:160Ton, length of the Stroke:200mm, Stroke per minute:30~55SPM, Bolster area:2020X760mm, Slide area:1500x580mm, Die height:450mm, Slide adjustment:100mm, Motor power:11KW with Die cushion,Transfer Feed:CTV-3, Leveler Uncoiler LM-3020

Capcity : 100t, Bolster dimension (left to right x front to back) : 600x1000mm,

Capacity : 150t, Stroke length : 200mm, Number of strokes : 30-55 spm, Die height : 400mm, Slide adjustment : 100mm, Slide dimensions (left to right x front to back) : 700 X 580mm, Bolster dimensions (left to right x front to back) : 1220 X 760mm, Main motor : 11kW.

Capacity : 80 ton, Number of strokes : 60spm, Stroke length : 160mm, Die height : 335mm, Slide adjustment : 80mm, Slide dimension (left to right*front to back) : 500*400mm, Bolster dimension (left to right*front to back*thickness) : 1000*600*110mm,Emergency stop time : 150 ms.

Capacity : 110t, Stroke length : 180mm, Number of strokes : 35-65 spm, Die height : 350mm, Slide adjustment : 90mm, Slide dimensions (left to right x front to back) : 600 X 520mm, Bolster dimensions (left to right x front to back) : 1080 X 680mm, Main motor : 7.5kW.

AIDA 150Ton TRANSFER LINE 6 UNITS : 1. AIDA NC1-1500(2)-E, YEAR-2002, SR NO : 0368, 2. AIDA NC1-1500(2)-E, YEAR-2002, SR NO : 0369, 3. AIDA NC1-1500(2)-E, YEAR-2002, SR NO : 0370, 4. AIDA NC1-1500(2)-E, YEAR-2002, SR NO : 0371, 5. AIDA NC1-1500(2)-E, YEAR-2002, SR NO : 0372, 6. AIDA NC1-1500(2)-E, YEAR-2002, SR NO : 0373, 7. AIDA TRANSFER FEEDER Complete Line

AIDA 110Ton TRANSFER LINE 3 UNITS : 1. AIDA NC1-110(2)-B, YEAR-1990, SR NO : 7704, 2. AIDA NC1-110(2)-B, YEAR-1990, SR NO : 7705, 3. AIDA NC1-110(2)-B, YEAR-1990, SR NO : 7707, 4. AIDA TRANSFER FEEDER Complete Line

Capacity : 45ton, Number of strokes : 80spm , Stroke length : 120mm, Die height : 270mm, Slide adjustment length : 270mm, Slide dimensions (left to right x front to back) : 400 x 300mm, Bolster dimensions (left to right x front to back) : 780 x 450mm, Emergency stop time : 140ms, Maximum Stop time: 155ms, Overrun detection position: 15 degrees, Main motor: 3.7kW 4P.

Capacity : 45ton, Number of strokes : 80spm , Stroke length : 120mm, Die height : 270mm, Slide adjustment length : 270mm, Slide dimensions (left to right x front to back) : 400 x 300mm, Bolster dimensions (left to right x front to back) : 780 x 450mm, Emergency stop time : 140ms, Maximum Stop time: 155ms, Overrun detection position: 15 degrees, Main motor: 3.7kW 4P.

Capacity : 45ton, Number of strokes : 60-95spm , Stroke length : 120mm, Die height : 270mm, Slide adjustment length : 60mm, Slide dimensions (left to right x front to back) : 400 x 300mm, Bolster dimensions (left to right x front to back) : 800 x 450mm, Emergency stop time : 155 ms, Maximum Stop time: 170 ms, Overrun detection position: 15 degrees, Main motor: 5.5kW 4P.

Capacity : 60ton, Number of strokes : 50-85spm , Stroke length : 140mm, Die height : 300mm, Slide adjustment length : 70mm, Slide dimensions (left to right x front to back) : 480 x 350mm, Bolster dimensions (left to right x front to back) : 870 x 520mm, Emergency stop time : 150 ms, Maximum Stop time: 165 ms, Overrun detection position: 15 degrees, Main motor: 5.5kW 4P.

Capacity : 60ton, Number of strokes : 45-85spm , Stroke length : 140mm, Die height : 300mm, Slide adjustment length : 70mm, Slide dimensions (left to right x front to back) : 500 x 350mm, Bolster dimensions (left to right x front to back) : 850 x 500mm, Emergency stop time : 150 ms, Maximum Stop time: 165 ms, Overrun detection position: 15 degrees, Main motor: 5.5kW 4P.

Capacity : 80ton, Number of strokes : 40-75spm , Stroke length : 160mm, Die height : 350mm, Slide adjustment length : 80mm, Slide dimensions (left to right x front to back) : 580 x 400mm, Bolster dimensions (left to right x front to back) : 950 x 550mm, Emergency stop time : 150 ms, Maximum Stop time: 165 ms, Overrun detection position: 15 degrees, Main motor: 7.5kW 4P.

Capacity : 110 ton, Number of strokes : 35-60 spm , Stroke length : 80mm, Die height : 400mm, Slide adjustment length : 100mm, Slide dimensions (left to right x front to back) : 650 x 450mm, Bolster dimensions (left to right x front to back) : 1050 x 600mm, Emergency stop time : 150 ms, Maximum Stop time: 165 ms,Overrun detection position: 15 degrees, Main motor: 11kW 4P, Slide adjustment motor:0.4kW 4P.

Capacity : 100t, Stroke length : 320mm, Number of strokes : 25-40 spm, Die height : 360mm, Slide adjustment : 100mm, Slide dimensions (left to right x front to back) : 500 X 410mm, Bolster dimensions (left to right x front to back) : 1070 X 600mm, Main motor : 15kW.

Capacity : 100t, Stroke length : 320mm, Number of strokes : 30 spm, Die height : 360mm, Slide adjustment : 100mm, Slide dimensions (left to right x front to back) : 500 X 420mm, Bolster dimensions (left to right x front to back) : 1080 X 600mm, Main motor : 11kW.

Capacity : 150t, Stroke length : 200mm, Number of strokes : 45 spm, Die height : 400mm, Slide adjustment : 100mm, Slide dimensions (left to right x front to back) : 700 X 580mm, Bolster dimensions (left to right x front to back) : 1170 X 760mm, Main motor : 15kW.

Capacity : 200t, Stroke length : 250mm, Number of strokes : 35 spm, Die height : 450mm, Slide adjustment : 110mm, Slide dimensions (left to right x front to back) : 880 X 650mm, Bolster dimensions (left to right x front to back) : 1390 X 840mm, Main motor : 15kW.

Capacity : 200t, Stroke length : 250mm, Number of strokes : 35 spm, Die height : 450mm, Slide adjustment : 110mm, Slide dimensions (left to right x front to back) : 880 X 650mm, Bolster dimensions (left to right x front to back) : 1390 X 840mm, Main motor : 15kW.

Capacity: 200ton, Number of strokes: 35~55SPM, Stroke length: 200mm, Die height: 420mm, Slide adjustment: 110mm, Slide bottom dimensions (left×right front and back) : 850×630, Bolster dimensions (left and right× front and rear) : 1450×850.

Capacity: 200ton, Number of strokes: 35-55SPM, Stroke length: 200mm, Die height: 420mm, Slide adjustment : 110mm, Slide dimensions (left to right x front to back) : 850 x 630mm, Bolster dimensions (left to right x front to back) : 1450 x 850mm.

Capacity : 150t, stroke length : 130mm, Number of strokes : 40 to 85 spm, Die height : 350mm, Slide adjustment : 100mm, Slide dimensions (left to right x front to back) : 900×580mm, Bolster dimensions (left to right x front to back) : 1150×600mm.

Capacity : 200t, Stroke length : 250mm, Number of strokes : 25-45 spm, Die height : 450mm, Slide adjustment : 110mm, Slide dimensions (left to right x front to back) : 880 X 650mm, Bolster dimensions (left to right x front to back) : 1390 X 840mm, Main motor : 15kW.

Capacity : 80 ton, Number of strokes : 40-60 spm, Stroke length : 180mm, Die height : 350mm,Slide adjustment : 80mm, Slide dimension (left to right*front to back) : 550*450mm,Bolster dimension (left to right*front to back*thickness) : 1000*600*86mm,Main motor : 7.5 kw, Emergency stop time : 165 ms.

Pressure ability : 45 ton,Number of strokes : 50-100 mm,Stroke length : 100mm,Die height : 250mm,Slide adjustment amount : 60mm,Slide dimension (left to right x front to back) : 400 x 350mm,Bolster dimension (left to right x front to back x thickness) : 800 x 450 x 110mm,Emergency stop time : 120 ms.

Pressure ability : 35 ton,Number of strokes : 100 mm,Stroke length : 80mm,Die height : 270mm,Slide adjustment amount : 55mm,Slide dimension (left,right*front,back) : 350*300mm,Bolster dimension (left,right*front,back*thickness) : 700*400*86mm,Emergency stop time : 105 ms, Setting position of overrun monitor : 15 degree.

Pressure ability : 110 ton,Number of strokes : 35-65 mm,Stroke length : 180mm,Die height : 350mm,Slide adjustment amount : 90mm, Slide area (left to right x front to back) : 630 x 520mm, Bolster dimension (left to right x front to back) : 1070 x 680mm, Emergency stop time : 170 ms, Setting position of overrun monitor : 15 degree.

Pressure ability : 25 ton,Number of strokes : 150-300 mm,Stroke length : 30mm,Die height : 245mm,Slide adjustment amount : 50mm,Slide dimension (left,right*front,back) : 250*200mm,Bolster dimension (left,right*front,back*thickness) : 550*300*68mm,Emergency stop time : 110 ms, Setting position of overrun monitor : 20 degree.

Pressure ability : 45 ton,Number of strokes : 100-200 mm,Stroke length : 50mm,Die height : 250mm,Slide adjustment amount : 60mm,Slide dimension (left,right*front,back) : 400*350mm,Bolster dimension (left,right*front,back*thickness) : 800*450*110mm,Emergency stop time : 165 ms, Setting position of overrun monitor : 20 degree.

Capacity: 150 ton, Number of strokes : 27-55 spm, Stroke length : 200mm, Die height : 420mm, Slide adjustment : 100mm, Slide dimension (left to right x front to back) : 700 x 550mm, Bolster dimension (left to right x front to back x thickness) : 1250 x 750 x 165mm, Emergency stop time : 160 ms, Setting position of overrun monitor : 15 degree, Allowable upper mold weight : 500 kg.

Pressure ability : 150 ton

Pressure ability : 150 ton,Number of strokes : 45 mm,Stroke length : 200mm,Die height : 450mm,Slide adjustment amount : 100mm,Slide dimension (left,right*front,back) : 700*500mm,Bolster dimension (left,right*front,back*thickness) : 1250*800*167mm,Emergency stop time : 200 ms, Setting position of overrun monitor : 15 Degree. COIL FEEDER - Outside the coil : 1200mm MAX, Inside the coil : 508mm MAX, SPM : 25-50, Speed : top 40, Motor : AC2.2kw.

Capacity : 80 ton,Number of strokes : 60-120spm ,Stroke length : 100mm,Die height : 350mm,Slide adjustment : 80mm,Slide dimension (left to right*front to back) : 550*450mm,Bolster dimension (left to right*front to back*thickness) : 100*600*140mm,Emergency stop time : 160 ms.

Pressure ability : 60 ton,Number of strokes : 42-85 mm,Stroke length : 120mm,Die height : 300mm,Slide adjustment amount : 70mm,Slide dimension (left,right*front,back) : 500*400mm,Bolster dimension (left,right*front,back*thickness) : 900*550*150mm,Emergency stop time : 133 ms.

Capacity : 150T,Stroke : 200mm,SPM : 30~61mm,Bolster : 1250*800mm,Slide : 700*550mm,Die height : 450,Slide adjustment : 100mm.

Capacity : 150T,Stroke : 200mm,SPM : 30~55mm,Bolster : 1220*760mm,Slide : 700*500mm,Die height : 400,Slide adjustment : 100mm,Motor : 11kW.

Pressure capacity : 110T,Stroke length : 200mm,Die height : 350mm,Slide metering : 100mm,Bottom surface dimension of the slide(left,right * front,back) : 600*500mm,one more inch : 1100*700,Emergency stop : 190ms,time maximum stop time : 210ms,Overrun monitoring position : 15,Main motor : 7.5KW,Air pressure : 5.7 kgf/cm square.

S: 180,50spm,DH: 350,ADJ:80,BL: 1000*600

ST: 175,30-55spm,DH: 390,ADJ: 100,BL: 1250*750.

Capacity : 150 T,Stroke length : 175mm,Number of stroke : 50spm,Die height : 390mm,Slide adjustment amount : Electric 100mm,Main motor : 11KW.

Capacity : 110t, Stroke length : 200mm, Number of stroke : 55spm, Die Height : 390mm, Slide Adjustment : 100mm, Slide dimensions (left to right x front to back) : 600 x 500mm, Bolster dimensions (left to right x front to back) : 1100 x 700mm.

Capacity : 110t, Stroke length : 200mm, Number of stroke : 55spm, Die Height : 390mm, Slide Adjustment : 100mm, Slide dimensions (left to right x front to back) : 600 x 500mm, Bolster dimensions (left to right x front to back) : 1100 x 700mm.

Capacity : 150 T,SPM : 50~100,Stroke length : 125mm,Die height : 350mm,Slide adjustment : 100mm,Slide : 700*550mm,Bolster : 1250*620mm,Main motor : 50 KW,With hydraulic mold clamping device. DATE LEVELLER FEEDER , NCMA-40,Coil width Max : 400mm, Plate thickness : 0.4~3.2mm,Inner diameter : 508Φ, Outer diameter Max : 1200mm,Coil weight : 2000kg. Request for set sales (single unit sales possible)

Pressure capacity: 110ton Number of strokes: 40-60SPM Stroke length: 150mm Die height: 365mm Slide adjustment fee: 100mm Bottom surface dimensions of the slide (left and right x front and back) 600×500 Bolster dimensions (left and right x front and back) 1100×700,accessories : Light beam cutout, die cushion, speed change

Capacity : 110t, Stroke length : 200mm, Number of stroke : 30-55spm, Die Height : 390mm, Slide Adjustment : 100mm, Slide dimenison (left to right x front to back) : 550*450mm, Bolster dimension (left to right x front to back) : 1000*600mm.

Capacity : 110t, Stroke length : 200mm, Number of stroke : 50spm, Die Height : 390mm, Slide Adjustment : 100mm, Slide dimension(left to right x front to back) : 600 x 500mm, Bolster dimension(left to right x front to back) : 1100 x 700mm, Maximum stop time : 210ms, Main Motor : 7.5kw.

Capacity : 110t, Stroke length : 200mm, Number of stroke : 50spm, Die Height : 390mm, Slide Adjustment : 100mm, Slide dimension(left to right x front to back) : 600 x 500mm, Bolster dimension(left to right x front to back) : 1100 x 700mm, Maximum stop time : 210ms, Main Motor : 7.5kw.

Capacity: 110 ton, Stroke length: 150mm, Number of strokes: 50spm, Die height: 380mm, Slide adjustment: 100mm, Bolster dimensions (left to right x front to back x thickness): 1100 x 700 x 150mm, Slide dimensions (left to right x front to back): 600 x 550mm.

PRESSURE CAPACITY : 200T,Number of stroke : 35,Stroke length : 300,Die height : 450,Slide adjustment : 110,Bottom surface dimensions of the slide (left and right * front and back) : 1320*820,Bolster dimensions(left and right * front and back) : 1450*850,Emergency stop time : 165,Overrun monitoring Device/setting position : 15,Power supply : 200 V 360,Main motor : 15,Working air pressure : 5,(4 - UNITS).

PRESSURE CAPACITY : 150T,Number of stroke : 40,Stroke length : 225,Die height : 390,Slide adjustment : 100,Bottom surface dimensions of the slide (left and right * front and back) : 1040*600,Bolster dimensions(left and right * front and back) : 1250*750,Emergency stop time : 200,Overrun monitoring Device/setting position : 15,Power supply : 200 V 360,Main motor : 11,Using air pressure : 5.7,(5 - UNITS).

PRESSURE CAPACITY : 200T,Number of stroke : 35,Stroke length : 300,Die height : 450,Slide adjustment : 110,Bottom surface dimensions of the slide (left and right * front and back) : 1320*820,Bolster dimensions(left and right * front and back) : 1450*850,Emergency stop time : 225,Overrun monitoring Device/setting position : 15,Power supply : 200 V 360,Main motor : 15,Using air pressure : 5.7,(5 - UNITS)

PRESSURE CAPABILITY : 150T,Stroke length : 175mm,Adjustment amount : 100mm,the following dimensions(left & right * front & back) : 700*550mm,Request size(left & right * front & back) : 1250*360mm,Die height : 480mm,Emergency stop time : 230ms,Maximum stop time : 230ms.

Capacity : 110T,SPM : 32 - 55,Stroke : 300mm, Die height : 355mm, Blost size : 1100 * 700.

Pressure capacity: 800kN Stroke length: 180 Die height: 350 Slide adjustment amount: 80 Slide: 550*450 Bolster: 1,030*600 almost unused

Capacity : 200t, Stroke length : 250mm, Number of strokes : 25-50spm, Die height : 450mm, Slide adjustment : 120mm, Slide dimensions (left to right x front to back) : 1450 X 850mm, Bolster dimensions (left to right x front to back) : 1450 X 890mm.

Capacity: 110t, Stroke length : 180mm, Number of stroke : 35-65spm, Die height : 380mm, Slide Adjustment : 90mm, Slide area (left to right x front to back) : 630 x 520mm, Bolster dimension (left to right x front to back) : 1070 x 680mm, Main motor: 7.5kw.

Stroke length: 180 Number of strokes: 50 DH: 350

S: 180, 35-65SPM, DH: 350, ADJ: 90, bolster square hole, ray, mount

S: 180 35-65 spm Main motor 7.5kw, air pressure used 5kgf / cm2 DH: 370 BL (front and back * left and right): 680 * 1070 Adj: 90 With die cushion

ST: 180 DH: 350 35-65spm

Number of strokes 25-50 Stroke length 200 Die height 480 Slide adjustment amount 120 Slide bottom dimension 850 x 650 Bolster dimension 1450 x 890

Capacity : 150t, Stroke length: 125 mm, Number of strokes : 50-100 spm, Die height: 150 mm, Slide dimensions (left to right x front to back) : 700 x 550 mm, Bolster dimensions (left to right x front to back x thickness) : 1250 x 800 x 165 mm.

Capacity 110t, Stroke length : 150mm, Number of stroke : 50spm, Die Height : 400mm, Slide Adjustment : 100mm, Slide dimension : 600mm.

Number of strokes: 32-65 Stroke length: 150 Die height: 380 Slide adjustment amount: 110 Slide: 600 x 550 Bolster: 100 x 700 x 150??

Capacity : 110t, Stroke length : 150mm, Number of stroke : 50spm, Die Height : 380mm, Slide Adjustment : 100mm, Slide dimension (left to right x front to back) : 600 x 550, Bolster dimension (left to right x front to back x thickness): 1100 x 700 x 150.

Stroke length: 150mm | Stroke number: 32-65spm | Die height: 380mm | Slide adjustment: Electric | Slide adjustment: 100mm | Bolster dimensions (front and back x left and right): 1100?700mm | Slide dimensions: 600 x 550mm

Capacity 110T, Model-OBS110-3, Year-1990, SPM

Capacity 110T, Model-OBS110-3, Year-1990, SPM

Capacity 110T, Model-OBS110-3, Year-1990, SPM

Capacity 110T, Model-OBS110-3, Year-1990, SPM

S: 130 70spm DH: 320 Electric Adj: 80 BL (front and back * left and right): 700 * 1000

S: 140 60spm DH: 280 Adj: 60 SL: 400 * 350 BL: 600 * 450 (The muffler is popping out behind) July 1988 # 4002324 Maintained

Capacity : 60t, Storke length : 120mm, Number of stroke : 85spm, Die Height : 290mm, Slide Adjustment : 70mm, Stroke dimension (left to right x front to back) : 500 x 400mm, Bolster dimension (left to right x front to back) : 920 x 550mm.

Capacity : 150T, Stroke : 130, SPM : 40-80 spm, Die Height : 335, Slide Adjustment : 100, Slide Area: 700 * 580, Bolster size : 1220 * 600

Capacity: 110T, Number of strokes: 40-60 SPM, Stroke length: 150mm, Die height: 365mm, Slide adjustment : 100 mm, Slide bottom dimensions (left and right x front and back)600 x 500, Bolster dimensions (left and right x front and back) 1100 x 700

Capacity : 110T, Stroke : 180mm, SPM :50spm, Die Height : 400mm, Slide adjustment : 100mm, Bolster size : 1050 * 600, Motor 7.5 * 6P

Capacity : 150T, Stroke length : 200mm, Number of stroke : 45spm.

Capacity : 20 Ton, Stroke : 70 mm, SPM : 60 ~ 70 , Die Length : 250 mm , Slide Adjust : 13 ~75 , Shank Hole : 65 mm, Motor : 2.2 kw , Operation Type : pneumatic

CAPACITY : 150, NO.OF.STROKES : 30-50spm , STROKE LENGTH : 175mm , DIE HEIGHT : 390mm , SLIDE ADJUSTMENT : 100mm , SLIDE AREA : 700*550mm , BOLSTER SIZE : 1250*750mm , MOTOR : 1.1 Kw

Capacity : 200T, Stroke : 250mm, Stroke per Minute : 35mm, Slide Adjustment : 110mm, Die Height :450mm, Slide Area : 880*650mm, Bolster Area : 1390*840mm Motor : 15Kw

Capacity : 150T, Stroke : 130mm, SPM : 40-80, Die Height: 325, Slide Adjustment: 100, Bolster Area: 1220 * 600mm, Motor: 15kw

Capacity : 150T, Stroke : 200mm, Stroke per minute : 45spm, Die Height : 400mm, Slide Area : 700*580mm, Bolster Area : 1220*760mm

Capacity : 110T, Stroke :110mm, Stroke per minute : 50~100spm, Die Height : 320mm, Slide Adjustment : 90mm,

Capacity : 110T, Stroke : 150mm, Stroke per Minute : 50spm, Die Height : 380mm, Slide adjustment : 100mm, Slide Area : 600*450 Bolster Area : 1100*700*130

Capacity : 80T, Stroke : 130mm, Stroke per Minute : 60spm, Die Height : 350mm, Slide Adjustment : 80mm, Slide Area : 500*400mm, Bolster Area :1000*600*110mm

Capacity : 35T

Capacity: 80T, Stroke: 130mm, Stroke per minute: 50~95spm, Die Height: 320mm, Slide adjustment: 80mm, Slide Area: 550*450mm, Bolster Area: 1030*600mm, Motor: 7.5Kw

Capacity : 80T, Stroke : 180mm, Stroke per Minute : 30~50spm, Die Height : 350mm, Slide Adjustment : 80mm, Slide Area : 550*450mm, Bolster Area : 1000*600mm Motor : 7.5Kw

Capacity: 45T, Stroke: 70mm, Stroke per Minute: 75~130spm, Die Height: 240mm, Slide Adjustment: 60mm, Slide Area: 400*350mm, Bolster Area: 800*450mm, Motor: 5.5Kw

Capacity : 45T, Stroke : 70mm, Stroke per minute : 75~130spm, Die Height : 240mm, Slide Area : 400*350mm, Bolster Area : 800*450mm

Capacity : 150T, Stroke Length : 100mm, Stroke Per Minute : 80 SPM, Die Height : 480mm, Slide Adjustment : 80mm, Bolter Size : 1250*700, Motor : 14 Kw

Capacity : 80T, Stroke : 160mm, Stroke Per Minute : 80 spm, Die Height : 350mm, Bolster Size : 560*400, Slide Adjustment : 950*550, Motor : 5.5 Kw

Capacity : 45T, Stroke : 140mm, Stroke Per Minute : 40 – 75 spm, Slide Adjustment : 80 mm, Die Height : 290 mm, Slide : 400*350, Bolster Size : 800*450, Motor : 5.5 Kw

CAPACITY : 200T, STROKE :200MM, STROKE PER MINUTE : 30~55MM, SLIDE ADJUSTMENT:110mm, DIE HEIGHT :420mm, SLIDE AREA :850*630mm, BOLSTER AREA:1450*850mm

Capacity 150T Model-OBS-150-2 Year-1989 SPM - 40-80 Stroke - 200mm Die Height - 450 Slide adjustment - 100mm Slide area: 700x500mm Bolster area:1250x800mm

Capacity 200T Model-OBS-200-2 Year-1985 SPM - 20-40 Stroke - 250mm Die Height - 480 Slide adjustment - 100mm Slide area: 850x650mm Bolster area:1450x850mm

Capacity 150T, Number of stroke : 27-55spm, Stroke length : 200mm , Die Height : 450 mm, Slide adjustment : 100mm , Slide dimension (left to right x front to back): 700x500mm ,Bolster dimension (left to right x front to back x thickness):1250x800x160mm.

Capacity 110T Model-OBS-110-3 Year-1988 SPM - 40 Stroke - 200mm Die Height - 450 Slide adjustment - 100mm Slide area: 600x500mm Bolster area:1100x700mm

Capacity 110T Model-TP-110B Year-1982 SPM - 40 Stroke - 200mm Die Height - 470 Slide adjustment - 100mm Slide area: 600x500mm Bolster area:1100x700mm

Capacity 110T Model-TP-110BX Year-1981 SPM - 40 Stroke - 200mm Die Height - 470 Slide adjustment - 100mm Slide area: 600x500mm Bolster area:1100x700mm

capacity - 80T; SPM - 37-75mm; Stroke - 180mm; Die Height - 400mm; Slide adjustment - 80mm; Slide -550*450mm; Bolster Size - 1000*600mm; With Die Cushion

Capacity 110T; SPM - 30-50; Stroke - 200mm; Die Height - 390mm; Slide adjustment - 100mm; Slide - 600*500mm; Bolster Size - 1100*700mm; with Die Cushion.

Capacity: 200 T, Stroke: 160 mm, Strokes Per Minutes: 35-65, Slide Adjustment: 110 mm, Die Height: 410 mm, Bolster Area: 1420 mm * 680 mm, Slide Area: 850 mm * 640 mm

Capacity: 110 T, Stroke: 110 mm, SPM: 50 - 95, Die Height: 285 mm, Bolster Area: 1080 mm * 680 mm, Slide Area: 600 mm * 520 mm, Slide Adjustment: 90 mm, Main Motor: 7.5 KW

Capacity: 110 T, Stroke: 150 mm, SPM: 30 mm ~ 55 mm, Bolster Area: 1100 mm x 700 mm, Slide Area: 600 mm x 450 mm, Die Height: 380 mm, Slide Adjustment: 100 mm

Capacity: 150 T, Stroke: 200 mm, SPM: 30 mm ~ 55 mm, Bolster Area: 1220 mm x 760 mm, Slide Area: 700 mm x 580 mm, Die Height: 400 mm, Slide Adjustment: 100 mm

Capacity: 25 T, Stroke: 80 mm, SPM: 120, Die Height: 220 mm, Bolster Area: 550 mm * 300 mm, Slide Area: 250 mm * 200 mm, Main Motor: 2.2 KW. Machine Working Video: https://youtu.be/FFZXRuRCPys

Capacity: 35 T, Stroke: 110 mm, SPM: 100, Die Height: 250 mm, Bolster Area: 700 mm * 400 mm, Slide Area: 350 mm * 300 mm, Main Motor: 3.7 KW. Machine Working Video: https://youtu.be/nCMGS7dbjzY

Capacity: 45 T, Stroke: 100 mm, SPM: 90, Die Height: 225 mm, Bolster Area: 800 mm * 450 mm, Slide Area: 400 mm * 350 mm, Main Motor: 3.7 KW

Capacity: 45 T, Stroke: 100 mm, SPM: 90, Die Height: 225 mm, Bolster Area: 800 mm * 450 mm, Slide Area: 400 mm * 350 mm, Main Motor: 3.7 KW. Machine Working Video: https://youtu.be/0lCMA84fHmg

Capacity: 45 T, Stroke: 100 mm, SPM: 90, Die Height: 225 mm, Bolster Area: 800 mm * 450 mm, Slide Area: 400 mm * 350 mm, Main Motor: 3.7 KW. Machine Working Video: https://youtu.be/gcI0VAqsH2M

Capacity: 25 T, Stroke: 80 mm, SPM: 120, Die Height: 220 mm, Bolster Area: 550 mm * 300 mm, Slide Area: 250 mm * 200 mm, Main Motor: 2.2 KW. Machine Working Video; https://youtu.be/dHafuOTpxx0

Capacity: 150 T, Stroke: 130 mm, SPM: 40 ~ 85, Main Motor: 11 KW. Machine Working Video: https://youtu.be/kxpohZ2IeeU

Capacity: 80 T, Stroke: 160 mm, SPM: 40 ~ 75, Die Height: 320 mm, Bolster Area: 980 mm * 600 mm, Slide Area: 540 mm * 460 mm. With Coil Feeder-SPEC:- Thickness: 3.2 mm, Width: 200 mm Machine Working Video: https://youtu.be/9hUFAQEllvU

Capacity: 200 T, Stroke: 250 mm, SPM: 25 mm ~ 45 mm, Bolster Area: 1420 mm x 840 mm, Slide Area: 850 mm x 640 mm, Die Height: 450 mm, Slide Adjustment: 110 mm. (Ref.No-H0084)