CAPACITY : 400T,Number of strokes : 30-55spm,Stroke length : 200mm , Die height : 550mm, Slide adjustment : 120mm, Slide dimensions (left to right x front to back) : 2300 x 900mm, Bolster dimensions(left to right x front to back) : 2350 x 1100mm, Emergency stop time : 200m/sec, Main motor : 37KW.

S: 150 40-80spm DH: 450 BL:2200*900 SL: 2200*700

Capacity: 300ton Stroke length: 255mm No-load continuous strokes: 30-80spm Die height: 610mm Slide adjustment amount: 100 mm Slide dimensions (LR x FB): 2500 x 1250 mm Bolster dimensions (LR x FB): 2500 x 1250 mm Main motor: 45kW

Capacity : 300 ton, Stroke: 150, Spm : 35-70, Die Height : 500, Slide Area: 2200 * 700, Bloster size: 2200 * 900

capacity : 300 ton, Stroke: 200,Die Height : 550, Slide Area: 1850 * 880, Bloster size: 1850 * 1000

Capacity : 300T, Stroke : 90mm, Stroke per Minute : 60~150spm, Die Height : 520mm, Slide Adjustment : 90mm, Slide Area : 1850*830mm, Bolster Area : 1850*1000mm, Motor : 37Kw

Capacity : 300T, Stroke : 200mm, Stroke per Minute : 27~70spm, Die Height : 550mm, Stroke Adjustment : 100mm, Slide Size : 3200*1200mm, Bolster Size : 3200*1200mm, Motor : 37kW, With Coil Feeder

Capacity : 500T, Stroke : 300mm, Stroke per Minute: 30~60spm, Die Height: 700mm, Slide Adjustment: 100mm, Slide Area : 2450*1800mm, Bolster Area : 2450*1800mm, Motor : 75 kW

Pressurizing capacity 300 ton Stroke: 200mm, Stroke per Minute: 40~100mm, Die Height: 550mm, Slide Length: 105mm, Slide Size: 1850 * 880mm, Bolster Size: 1850 * 1000mm

Capacity : 200T, Stroke : 200mm, Stroke per Minute : 50~120spm, Die Height : 475mm, Slide Adjustment : 100mm, Slide Area : 1550*830mm, Bolster Area : 1550*950mm, Motor : 30Kw

Capacity : 200T, Stroke : 200mm, Stroke per Minute : 50~120spm, Die Height : 475mm, Slide Adjustment : 100mm, Slide Area : 1550*830mm, Bolster Area : 1550*950mm,

Capacity : 500T, Stroke : 250mm, Stroke per Minute :30~70spm, Die Height : 550mm, Slide Adjustment : 100mm, Slide Area : 2450*1150mm, Bolster Area : 2450*1250mm,

Capacity : 300T, Competence Biovariate (lower Point above) 6.5, Stroke : 200mm, Stroke Per Minute : 40~100spm, Die Height : 550mm, Slide Adjustment : 100mm, Slide Area : 2150*900mm, Bolster Area : 2150*1000mm, Without Die Cushion

Capacity: 600T, Stroke : 250mm, Stroke per Minute : 60~70spm, Bolster Area: 2450*1300mm, Slide Area: 2450*1200, Die Height: 650mm, Slide Adjustment: 200mm, With ORII Coil Feeder, With 600mm, Thickness 0.6~6.0mm

Capacity : 500ton, Pressure ability: 4900kN, Stroke length : 250mm, strokes speed: 125 mm/sec, Die height : 850mm, Emergency stop time: 280msec,Maximum stop time:300msec, Main motor: 92.5kW.

Capacity : 300ton, Stroke length : 350mm, Number of strokes : 30 spm, Die height : 700mm, Slide adjustment : 10mm, Slide dimensions (front/back*left/right) : 2100*1000mm, Bolster dimensions (left/right*front/back*thickness) : 2400*1200*200 mm,Machine weight : 44530 kg, Emergency stop time : 295 ms, maximum stop time : 330 ms.

Capacity : 300ton, Stroke length : 350mm, Number of strokes : 30 spm, Die height : 700mm, Slide adjustment : 10mm, Slide dimensions (front/back*left/right) : 2100*1000mm, Bolster dimensions (left/right*front/back*thickness) : 2400*1200*200 mm,Machine weight : 44530 kg, Emergency stop time : 295 ms, maximum stop time : 330 ms.

CAPACITY : 150 T , S: 130~ 55min,DH: 420

Capacity: 40t, Stroke lenght : 70mm, Number of stroke : 100spm, Die Height : 340mm,Slide dimension (left to right x front to back) : 630 x 440mm,Bolster dimension (left to right x front to back): 630 x 440mm,Bed height : 720mm.

CAPACITY: 1600TON, STROKE LENGTH: 900MM, STROKE SPEED: 10-20SPM, DIE, HEIGHT: 1,450MM, BOLSTER DIMENSION: 4600 x 2500MM, SLIDE ADJUSTMENT: 700MM, MAIN MOTOR: 450KW x 4P, FRONT MOOVING TYPE.

Capacity : 3OOT, Number of strokes : 15~25spm, stroke length : 450mm, Die height : 840mm, Slide adjustment amount : 350mm, Slide dimensions (left and right x front and back) : 2500 x 1200mm, Bolster dimensions (left and right x front and back x thickness) : 2500 x 1300 x 180mm, Sudden stop time : 200ms, Setting position of over run monitoring : 15 degrees.

Capacity : 200t, Stroke length : 130mm, Number of strokes : 45spm, Die height : 450mm, Slide adjustment : 100mm.

Capacity : 800ton, stroke length : 150mm, number of strokes : 20 to 70 spm, Die height : 740mm, Slide dimensions (left to right x front to back) : 1850×1030 mm, Bolster dimensions (left to right x front to back) : 1850×1000 mm, Main motor : 75kw.

Capacity:4000ton,Load curve : 13mm, Stroke Length : 500mm, Die height : 1550mm, Bolster area : 7620mmx1980mmx350mm, Slide adjustment : 500mm, Cushion Pad : 990mmx1080mm, Distance between Pad and Bolster :10mm, Number of Die cushion pad : 7, Die cushion capacity: 441(63x7)Ton, Die cushion stroke: 250mm, Stroke per minute: 6SPM.

Pressure ability : 300 ton,Number of strokes : 20-40 mm,Stroke length : 400mm,Die height : 650mm,Slide adjustment amount : 200mm, Bolster dimensions (front and back x left and right): 1400 x 2000mm Slide dimensions (front and back x left and right): 1200 x 1800mm, Setting position of overrun monitor : 10 degree, Mechanical weight : 40 ton. Accessories - Width t : 1.6-5.5mm uncoiler leveler.

PRESSURE CAPACITY : 200T,Number of stroke : 15-25,Stroke length : 500,Die height : 700,Slide adjustment : 150,Emergency stop time : 265,Maximum stop time : 265,Overrun monitoring Device/setting position : 10,Power supply : 200 V 360,Main motor : VS 22.

PRESSURE CAPACITY : 300T,Number of stroke : 45-30,Stroke length : 500,Die height : 700,Slide adjustment : 160,Bottom surface dimensions of the slide (left and right * front and back) : 1300*1300,Bolster dimensions(left and right * front and back) : 1500*1500,Emergency stop time : 150,Overrun monitoring Device/setting position : 10,Power supply : 200 V 360,Main motor : 30,Using air pressure : 6.

Capacity : 800T, Stroke length : 200mm, Number of stroke :10-30spm, Die Height :300mm, Slide adjustment : 50mm, Slide dimension (left to right x front to back) :2200*900mm, Bolster dimension (left to right x front to back) : 2200*1000mm.

Ability: 1000T Stroke length: 600mm Number of strokes: 12 spm Slide adjust: 400mm Die height: 1100mm Main motor: 75kw Bolster area: 4000 * 2000mm Slide dimensions: 3700 * 1800mm Adjust motor: 11kw Die cushion capacity: 50t * 2 = 100t Cushion stroke: 300mm Cushion pad area: 1500 * 1450mm Balancer ability: 12t Date of manufacture: 1985

Capacity 600ton S: 300 20-80spm DH: 1350 Adj: 350 BL: 4300 * 2200 * 250 SL: 4300 * 2200

Capacity : 250 ton, Stroke length : 200mm, Number of strokes : 65spm, Die Height : 655mm, Slide dimension (left to right x front to back) : 900x1100 mm, Bloster dimension (left to right x front to back) : 1150x1100 mm, Bolster thickness: 180 mm, Die Cushion: 15 tons x 100 mm.

Capacity : 350 ton, Stroke Length : 400mm, Number of stroke : 15spm, Die Height : 1000mm, Slide adjustment : 350mm, Slide Area(left to right x front to back) : 2600 x 1400mm, Bloster size(left to right x front to back) : 2820 x 1650mm, Main motor: 37kw.

Capacity : 500 ton, Stroke length : 450mm, Number of stroke : 16spm, Die Height : 1100mm, Slide adjustment : 600mm, Slide dimension (left to right x front to back) : 2250 x 1250mm, Bloster dimension (left to right x front to back x thickness) : 2500 x 1500 x 220mm, Work surface height : 500mm.

Capacity : 500 ton, Stroke length : 650mm, Number of strokes : 14spm, Die Height : 1400mm, Slide adjustment : 600mm, Slide dimensions (left to right x front to back) : 3000 x 1700mm, Bloster dimensions (left to right x front to back) : 3000 x 1700.

CAPACITY: 1500T, B.D.C : 13mm, SLIDE STROKE : 800mm, SPM : 20, DIE HEIGHT: 1500mm, SLIDE ADJUSTMENT : 700mm, SLIDE & BOLSTER AREA : 4500*2500mm, DIECUSION CAPACITY : 300T, STROKE ADJUSTMENT : 0~300mm

CAPACITY: 1500T,STROKE LENGTH: 700mm,SPM: 10~20, DIE HEIGHT : 1500mm,SLIDE ADJUSTMENT : 700mm, BOLSTER AREA : 4000*2500mm, bolster thickness : 320mm , DIECUSHION CAPACITY : 230T, STROKE LENGTH : 0~300mm

Capacity : 110T, Stroke : 180, spm: 35-65, Die Height: 400, Electric Adj: 90, Bolstersize (front and back * left and right): 680 * 1660

Capacity: 600ton, Stroke : 300, Spm :20-80, Die Height: 1350, Slide Adjustment: 350, Bolster Size: 4300 * 2200 * 250, Slide Area: 4300 * 2200

Capacity : 400T, Stroke: 300, Spm: 20-35, Die height: 700, Bolster size: 3000 x 1400, Slide adjust: 120, Main motor: 37kw x 4P / 380V, Rotary cam switch: electronic

Capacity : 500T, Stroke : 500mm, Stroke per minute : 15~30spm, Bed Size : 3100*1350*200mm, Slide Size : 3100*1200mm, Die Height : 850mm, Slide Adjustment : 200mm, Motor : 75kw

Capacity : 200T, Stroke : 300mm, Stroke per minute : 18~34spm, Bed Size : 2000*1220mm, Slide Size : 1830*1000mm, Die Height : 820mm, Slide Adjustment : 400mm, Motor : 22kw

Capacity : 250T, Stroke : 140mm, Stroke per Minute : 50spm, Slide Adjustment : 15mm, Die Height :350mm, Slide Area :500*400mm, Bolster Area : 600*500mm, Motor : 22Kw Sonoruka Coil Feeder Model No. : DF-1-400 Serial No. : 3992 Plate Width : 70~400 Plate Thickness : 1.6~6.0mm Thickness * Width : 3.2*400mm Outer Dia : 1200mm, Inner Dia : 508mm, Quantity Feed : 2000mm Max Coil Weight : 3T

Capacity : 250T Stroke: 300mm Stroke per Minute: 22-44spm Die Height: 550mm Slide Adjustment: 120 Slide Area: 2100*700 Bolster Area: 2400*950 Mitsuan/DC (With Die Cushion)

Capacity : 250T Stroke: 300mm Stroke per Minute: 22-44spm Die Height: 550mm Slide Adjustment: 120mm Slide Area: 2100*700 Bolster Area: 2400*950 Mitsuan/DC

Capacity : 500T, Stroke : 500mm, Stroke per Minute : 15rpm, Slide Adjustment : 500mm, Die Height : 1100mm, Slide Size : 1600 x 2800mm, Bolster 1600 x 2800mm

Capacity: 1600T, Stroke : 700mm, Stroke per Minute :20spm, Die Height: 1650mm, Bolster Area: 3550*2240mm,

Capacity: 1000T, Stroke : 600mm, Stroke Per Minute : 12spm, Die Height : 1700mm, Slide Adjustment : 560mm, Bed Size : 3710*2200mm, Slide Size : 3290*2100mm, Bolster Plate : 3500*2200*200mm, Clutch Type : Friction, Hydromatic, Die Cushion Capacity : 240 (120*2) Stroke : 300mm, Main Motor Drive : 7.5 Kw, Slide Adjustment Motor : 7.5 Kw, Accessories : Over Load Project, Moving Bolster, Cushion Stroke, Safety Bar,

Capacity : 300T, Stroke : 360mm, Stroke per Minute : 15 ~ 35spm, Die Height : 700mm, Slide Adjustment : 170 mm, Bolster Area : 2150*1400mm, Slide Area : 2150*1250mm, Main Motor : 37 Kw

Capacity: 800T Stroke : 500mm, Stroke per Minute : 20spm, Bolster Area: 4000*2000mm Slide Area: 3700*1800mm, Die Height: 1100mm, Slide Adjustment: 420mm, Die Cushion Capability: 60*2 = 120Ton Cushion Stroke: 250min

Capacity: 300 T, Stroke: 200 mm, Strokes Per Minutes: 30 -80, Slide Adjustment: 100 mm, Die Height: 550 mm, Bolster Area: 1850 mm * 1100 mm * 200 mm, Slide Area: 1850 mm * 900 mm

Capacity : 300T, Stroke : 400mm, Stroke per Minute : 15-28spm, Die Height : 850mm, Bolster Area : 2300*1300mm,

Capacity (ton): 100, Stroke (mm) :140, Die Height (mm) :320, Bolster Area (mm) :830*760, Main Motor (kw) :5.5

Manufacture:KOMATSU, Model:E4S500-MB, Capacity (ton): 500, Y.O.M:1990, Stroke(mm):500, Slide Adjustment (mm):500, Strokes Per Minutes (min):13.5-20, Die Height (mm):1420, Slide Area (mm):2500*1700, Bolster Area (mm):2500*1700*230

Capacity: 500tT,Stroke (mm):300,Slide Adjustment (mm):250,Strokes Per Minutes (min): 15~45,Die Height (mm):650,Slide Area (mm):2500*1500, Bolster Area (mm):2500*1500,Main Motor (kw):75 With Coil Feeder-SPEC:- Thickness: 4 mm, Width: 600 mm Note: Machine already Dismandled.

Capacity:300T,Speed:20-60spm

Capacity:1200t,feed stroke:750mm,clamping stroke:210mm,lifting stroke:120mm,height of blank feed:645mm,height of pannel carryout:475mm,height of feed bar face:625mmm,min blank size:150x460mm,blank thickness:0.5-1.66mm

Capacity:4000ton,Load curve : 13mm, Stroke Length : 500mm, Die height : 1550mm, Bolster area : 7620mmx1980mmx350mm, Slide adjustment : 500mm, Cushion Pad : 990mmx1080mm, Distance between Pad and Bolster :10mm, Number of Die cushion pad : 7, Die cushion capacity: 441(63x7)Ton, Die cushion stroke: 250mm, Stroke per minute: 6SPM, Motor Specifications:1.Main Motor: Hitachi,220KW,400V, 2.Slide Adjustment Motor:Hitachi,15KW,200V,3.Motor for Hydraulic unit: Hitachi,15KW,200V,4.Brake cooling Motor:Hitachi,2.2KW,200V,5.Grease Pump Motor: Hitachi,0.2KW,200V, 6.Motor for cushion packing oil: Hitachi, 2.2KW,200V.

stroke length:450mm, number of strokes:25spm, die height:675mm, slide adjustment:200mm, bolster dimension:(front and back � left and right): 1900✕1200mm,Slide area:2100x1350mm

Capacity:300ton, Die height:900mm, Stroke per minute:20~60SPM, Bolster area: 2770x1800mm,slide area:2500x1800mm, moving bolster, with feeder and Feeder Miminum thickness:0.6mm, maximum thickness:3.2mm, width:1.5mm,

capacity: 300ton,stroke length: 350mm, die height: 700mm,number of stages:10, stroke per minute:2.(20-40)3.(20-30), maximum drawing depth:2.(120)3.(180), slide adjustment: 100mm,slide area: 3000x1000mm, bolster area: 3000x1000mm, working floor height: 1070mm above floor level, :ORII feeder year :1983: roll minimum thickness:0.3~3.2mm, width:30-600mm

Capacity:300ton, Stroke length:450mm, Stroke per minute:15~25mm, Bolster area:2100x1350mm, Slide area:1900x1200mm,Main motor:37KW

Capacity: 300 ton Transfer Press, Stages-8 SPM : 30~60, DH : 500, 30Kw

Capacity 300 tons, Stroke length 450, Number stroke 18, Die height 700, Slide adjustment amount 200, Slide area 1900 � 1200, Bolster area 2150 � 1350, The main motor 30 Kw, Slide adjustment motor 2.2 Kw, With Die-cushion Capacity 50 tons (1 putt), Stroke length 225, Pat area 1500 � 660, Ray type with safety equipment, with portable stand, This machine is currently in use.

Capacity : 1200t, Normal pressure : 254 kgf/cm, Stroke length : 1700mm, Daylight : 2200mm, Table area : 3500 x 2200mm, Inertia drop value : 70mm, Emergency stop time : 200m/sec.

Capacity : 500t, Stroke length : 1500mm, Maximum sliding speed : 150 mm/sec, Slide inertia lowering value : 150mm, Emergency stop time : 220ms.

Capacity : 1400t, Stroke length : 1600mm, Die height : 2600mm, Table area (left to right x front to back) : 4000 x 2400mm, Emergency stop time : 270ms.

Capacity: 1500T, Stroke length:1700 mm, High Pressure: 30.1MPa, Bolster dimensions : 3500X2500mm, Bottom of slide290mm/s, Daylight: 2000mm.

Capacity : 250T, Day light: 700 mm, Bolster dimension: 1800*1000mm, Slide dimension : 1200*800mm, With die cushion.

Capacity : 150ton, Stroke : 200mm, Daylight : 750mm, Bolster : 1400x1100mm, Slide : 1400x1100mm, Motor : 45kw.

Capacity : 400t, Stroke length : 630mm, Open height : 1000mm, Slide dimension (left to right x front to back) : 1200mmx850mm, Bolster dimension (left to right x front to back) : 2000mmx1300mm.

hydraulic press Maximum pressure: 20.7MPa S: 500 Downloads: 600 T: 1000*700

Capacity: 200 T, Stroke length: 300 mm, Table dimensions: 2000 x 1000 mm, Slide dimensions: 2000 x 700 mm, Daylight: 600 mm.

Capacity : 425T, Stroke length : 500mm, Die Height : 700mm, Bolster dimension (left to right x front to back) : 900 x 700mm.

Capacity : 400t, Stroke length : 630mm, Open height : 1000mm, Slide dimension (left to right x front to back) : 1200mmx850mm, Bolster dimension (left to right x front to back) : 2000mmx1300mm.

CAPACITY : 600T hydraulic Press, Stroke : 900, Die Height : 1200, Bolster Size : 3200*1000,

Stroke length : 2800, Pressure capacity : 2500, Table dimensions : 4000x3000, Daylight : 3500mm, Bottom of slide : 250mm/s

Capacity：1000t, bolster area：3500×2000, sliding area：3500×2000, open height：1600, stroke：1300, ram diameter center：Φ560, side：Φ390×2, pull-up cylinder diameter：Φ140×2, pull-up force：60t, no-load rate rise：210, low-speed rise：20, descent：300, low-speed descent：80, pressurized velocity, central pressurization：０～175TON 50, 175～500TON 50～30, total pressurization：600TON hereinafter23, 600～1000TON 23～16, low-speed pressurization：2～15, maximum speed pressure, 210t, die cushion output：300t, pad area：2700×1570, stroke：400, cylinder diameter：Φ236×3, no-load rate rise：100, low-speed rise：0～10, knockout：25t, working pressure：230

Eco-servo specifications : Capacity : 500T, bolster size : 3000 * 1650 , Stroke : 1500 , DL : 1800 , Die cushion 40-200t , Die cushion stroke: 300T , Cushion pin diameter φ40 20 cushion pins

Capacity : 600t,Hydraulic cylinder : 1, Piston dia: 600 mm, Rod dia: 565 mm, Stroke : 1200 mm, Day light : 1500 mm, Slide Table : 2,500 x 1500 mm, Bolster size : 2,500 x 1500, With DC

Capacity : 600t,Hydraulic cylinder : 1, Piston dia: 600 mm, Rod dia: 565 mm, Stroke : 1200 mm, Day light : 1500 mm, Slide Table : 2,500 x 1500 mm, Bolster size : 2,500 x 1500, With DC

Capacity : 600T

1000T hydraulic press Kawasaki Hydromechanics Power: 1000t S: 1300 BL: 4500 * 2000

Capacity : 100T, T: 1000 x 800 x thickness 150 Inertia drop value 20.5 S: 500 Inertia drop value 20.5mm Motor 3.7kw Machine Dimensions: W2.8 x D1.16 x H3.27M Machine Weight: 6.0 T Ray cutout die cushion

CAPACITY : 500T hydraulic Press, Stroke : 1200, Die Height : 1600, Bolster Size : 2500*2200, Slide Size : 2500*2200

Capacity: 500 T, Stroke: 800 mm, Table Area: 2500 mm * 1800 mm

Max Capacity:　1200 T, Stroke:　1500 mm, Daylight(Max Opening):　2100 mm, Down Speed:　250 mm/sec, Pressing Speed:　25(less than 370T)~15mm/sec(600T), Auto change15mm/sec(1200T), Shut Height: 600mm, Up Speed:　250 mm/sec, Bolster Area:　2500mm x 2000mm(LR x FR), DIE CUSHION - Cushion Pad area: 2050 * 1560mm, Capacity:　140~700 (T), Cylinder no.: 175 T * 4ea, KNOCK OUT - Capacity: 50 T, Max Stroke: 650mm,

Capacity: 750T, Stroke: 900mm, Daylight:1700mm, Table : 3500 x 1500mm, Bed : 2000 x 1500mm