Capacity : 300T, Stroke : 200mm, Stroke per Minute : 27~70spm, Die Height : 550mm, Stroke Adjustment : 100mm, Slide Size : 3200*1200mm, Bolster Size : 3200*1200mm, Motor : 37kW, With Coil Feeder

Capacity : 2500T, Stroke : 350mm, Die space adjustment: 10mm,Bed dimensions :(left to right x front to back) : 1280 x 1400 mm, Slide dimensions : (left to right x front to back) :1090 x 1150 mm,Press Uprights Height: 1000mm, Width: 800mm.

Capacity : 4000 ton, Slide stroke : 380 mm, Frequency of the slide strokes per min : 55spm, Shut height : 1380 mm, Width of bed under guide lines : 1580 mm, Bed dimensions : 1520×1600 mm, Slider dimensions : 1450×1440 mm, Slider adjustment : 15 mm, Overall width of machine : 4440 mm, Overall depth of machine : 4656 mm, Overall height of machine : 8570 mm, Overall weight (net) : 245000 kg, Working voltage of main drive : 3×380 V, Frequency : 50 Hz, Overall used machine capacity : 200 kW.

Capacity : 5000 ton.

Capacity : 4000t, Number of strokes : 45spm, Stroke length : 406mm, Main shaft dia at Journals : 686mm, Main shaft dia at Eccentric : 1048mm, Width of Eccentric Bearing : 812mm, Shut height with top knockout plate : 984mm, Shut height without top knockout plate : 1092mm, Die seat (left to right x front to back) : 1568 x 1625mm, Ram face (left to right x front to back) : 1422 x 1346mm, Approximate net weight : 460,000Lbs.

Capacity : 2500t, Stroke : 360mm, Shut height : 1000mm, Number of stroke : 70spm, Slide Adj : 7 mm, Ram size (left to right x front to back) : 1400 x 1400 mm, Bed size (left to right x front to back) : 1500 x 1400 mm.

Capacity : 1600ton, Die Height : 770mm, Stroke length: 280 mm, number of Stroke per minute : 20 - 40spm, Slide dimensions (left to right x front to back) : 950mm x 900mm, Bolster dimensions (left to right x front to back) : 1050mm x 1350mm, Slide adjustment : 12mm, Main motor : 75 Kw.

Capacity : 1600ton, Die Height : 820mm, Stroke length: 280 mm, number of Stroke per minute : 60 - 80spm, Slide dimensions (left to right x front to back) : 920mm x 1000mm, Bolster dimensions (left to right x front to back) : 1050mm x 1200mm, Slide adjustment : 17mm, Main motor : 75 Kw.

S:220 60spm DH:680 B:820x950mmxT:150mm

Capacity: 630ton,Slide Stroke : 180mm/Max 36 SPM,Die Height : 600mm,Adjust Dimensions : 60mm,Bolster Dimension : 1100*780*120,Slide Dimensions : 1090*680,Bed Knockout (S/C) 60mm/40ton,Main Motor : 55kw,Machine weight : 45,000kg.

STROKE; 355 60 SPM DIE HEIGHT; 934 ADJUST; 10 BOLSTER ; 1450x900,WITH TRANSFER EQUIP. FEED; 260 LIFT; 150 CLAMP; 100 MATERIAL DIA; 40~70 mm PRODUCTS DIA; 170

CAPACITY : 200T, With die cushion.

Capacity: 4000T, Ram stroke: 400(+/- 1.0), Distance from table to ram upper shoe when ram is at bottom of stroke: 1200 mm, Ram to table adjustment range: 10 (+/- 0.2), upper knockout: Capacity: 8T, Stroke: 82 mm, Bottom Knockout: capacity: 12.5T, Stroke: 82 mm, Table dimensions (LR x FR): 1710 x 1620 mm, Ram dimensions (LR x FR): 1470 x 1100 mm, Dimensions of opening in press racks: Min height: 1100 mm, Min. width: 1100 mm, Press overall dimensions: LR: 6628 (+/- 50) mm, FR: 5700 (+/- 50) mm, Height above floor level: 7830 (+/- 80) mm, Press mass: 366583 (+/- 3%) kg, Compressed air consumption per ram stroke: 115 cu.dm, Air pressure in air-pressure system MPa(kgf/sq. cm): min - 0.5 (5), max - 0.7 (7), No. of electrical motors: 4, Main drive electric motors: Power: 160 kW, Speed: 975 rpm, Shut height adjustment mechanism electric motors: Power: 5 kW, Speed: 720 mm, oil lubricating station electric motors: Power: 1.1 kW, Speed: 1400 rpm, Grease lubricating station electric motors: Power: 0.4 kW, Speed: 1400 rpm

Capacity: 1600 Ton, Slide Stroke: 300 mm, No. of Stroke: 85 spm, Die Height: 660 mm, Slide Adjustment: 10 mm, Ram size : 860X910,Slide Size : 940X1200mm,Upper knock-out Stroke : 40mm,Force tonnage : 6.3mm,Lower knock-out Stroke : 32mm, Force tonnage : 10mm,Bet Dimensions: Left/right-1050mm ,front/back-1200mm, Slide Dimensions: Left/right-600 mm, Front/back-910mm ,Dimensions of ports in press arms : height/minimum : 710mm,width/minimum : 630mm Overall Dimension: Left/right-4850mm, Front/back-3515mm,Height of press above floor level:5570mm, Main Electric Motor: 90 kW, MACHINE WEIGHT : 120TON UNDER POWER.

Capacity: 800t, Stroke: 200mm SPM: 60, Die Height: 500mm, Bolster Size: 1100mm X 850mm, Slide Area: 1100*800mm, Slide Adjustment: 5mm, Main Motor: 37 Kw

Capacity: 2500 T, Stroke length: 300 mm, Stroke per minutes: 70 SPM, Die Height: 910 mm, Ram Adjustment: 10 mm, Table size (LRxFR): 1420 x 1400 mm, Ram size (LRxFR): 1350 x 1250 mm

Capacity: 400t, Stroke: 140mm SPM: 45, Die Height: 370mm Bolster Size: 480mm X 600mm Slide Area: 370*500mm Slide Adjustment: 15mm Main Motor: 30 Kw

CAPACITY : 1000TON

CAPACITY : 1600TON, STROKE; 280, 75 SPM, DIE HEIGHT :765, ADJUST; 10 BOLSTER SIZE; 1240X1140 SIDE OPEN SIZE; 920X920 WITH KNOCK OUT

CAPACITY : 1500 TON, STROKE; 250 DIE HEIGHT; 700 35 SPM ADJUST; 10 BOLSTER SIZE; 1100X1000 SIDE OPEN SIZE; 450X400 WITH KNOCK OUT ALUMINIUM, WARM, COLD, KNUCKLE, HOT FORGING

6000t HOT FORGING PRESS + 500t TRIMMING PRESS Make : National (U.S.A). YOM : 1967 Stop Year : 2020 Final maintenance year : 2019 Production : Crankshaft Stroke : 457.2mm SPM : 36 Shut height Max : 1143mm per min - Min1120.8mm Opening of front : 1828.8mm (LR) * 1143mm(H) Opening of side : 965.2mm(FR) * 1092.3mm (H) KO Stroke : upper 101.6mm, below 203.2mm ( Dimensions) : 6000mm (W) * 5664mm (L)* 9169mm (H) Weight : approx 520T Installation space of press : 6198mm ( LR)* 5232mm (FR) Installation space of total equipment approx : 13m*24m 500t Trimming Press ( one gear part is missing) Make : Natori (Japan) Stroke : 300mm SPM : 20 Die Height : 950mm ( in case of adjust up) Ram adjustment : 130mm Main motir : 50hp (3000v) Diemensions : 2500mm (W) * 2812 mm (L) * 770mm (H) Weight approx : 55 t

Capacity: 4000T, Ram stroke: 400(+/- 1.0), Distance from table to ram upper shoe when ram is at bottom of stroke: 1000 mm, Ram to table adjustment range: 10 (+/- 0.5), upper knockout: Capacity: 8T, Stroke: 65 mm, Bottom Knockout: capacity: 12.5T, Stroke: 65 mm, Table dimensions (LR x FR): 1710 x 1620 mm, Ram dimensions (LR x FR): 1420 x 1420 mm, Dimensions of opening in press racks: Min height: 1100 mm, Min. width: 1100 mm, Press overall dimensions: LR: 6228 (+/- 50) mm, FR: 5515 (+/- 50) mm, Height above floor level: 7790 (+/- 80) mm, Press mass: 361370 (+/- 3%) kg, Compressed air consumption per ram stroke: 115 cu.dm, Air pressure in air-pressure system MPa(kgf/sq. cm): min - 0.5 (5), max - 0.7 (7), No. of electrical motors: 4, Main drive electric motors: Power: 160 kW, Speed: 975 rpm, Shut height adjustment mechanism electric motors: Power: 5 kW, Speed: 720 mm, oil lubricating station electric motors: Power: 1.1 kW, Speed: 1400 rpm, Grease lubricating station electric motors: Power: 0.4 kW, Speed: 1400 rpm

Capacity: 2500T, Die height: 1020 mm, Stroke Length: 320 mm, Ram Adjustment: 16 mm, Strokes per minute: 20 - 40 mm, Bolster size: 1900 x 1080 mm, Slide size: 1200 x 780 mm, Main Motor: 200 kW AC440V

Capacity : 400T, Stroke: 250 mm, Number of strokes: 40 spm, Die height: 700 mm, Bed Size : 1380*990mm, Slide Size : 1380*850mm.

CAPACITY : 1200T, Power (Lower dead Point): 1200T, permissive : Good Weight (Left, right, 100 MLC): 1200T, Stroke: 300, Slide Adjustment : 300mm, Lee Bottom : 850mm, Stroke Per Minute : 25spm, Number of Working Strokes per minute : 10 times, Die height: 850, Adjust: 300, Bolster: 2000x1600, Adaptor Area : 800*1600mm, Upper Knockout (Mechanical ) Power * Stroke : 7.5 T *50mm, With die cushion: 65ton, Pneumatic - 1 butt, 1 cylinder, in the upper limit of the ability : (maximum) - 35T, At the bottom : 65T, Main Electric Motors : 55KT*6P, Electric Motor for slide adjustment : 3.7KIT*4P, Use Air pressure CAS : 6, Electric : Source 200V*50Hz, Control Circuit : 100V*50HZ,

Capacity: 500T

Capacity: 1000T, Stroke length: 400 mm, No. of Strokes: approx. 16 spm, Shut height: 750 mm (from stroke down, adjust up to bed surface), Slide Adj: 120 mm, Bed size (RL*FB): 1100*1600 mm, Slide size (RL*FB): 800*1000 mm, Main motor: 200V.6P.75 HP, Adjust motor: 200V.4P.75 HP, Air pressure (Normal use): 5 kg/sq.cm, Ability limit: Max. ability 1000T is generated at 30 mm above stroke dead point

Capacity: 200 T, Stroke: 200 mm, SPM: 25, Die Height: 450 mm, Bolster Area: 1000 mm * 1000 mm, Slide Area: 470 mm * 450 mm, Slide Adjustment Area: 70 mm, Main Motor: 15 KW. (Ref.No-H0110)

Capacity: 630 Ton

Capacity : 440T, Load Curve : 6mm, Stroke Length : 300mm, SPM : 50, Slide Adjustment : 25, Slide Area : 1470* 840, Bolster Area : 1590 * 990, Main motor : 37kw

Note: DOUBLE CONNECTING ROD, Capacity: 150 ton, Stroke Per Minute: 35(SPM),Stroke length: 200 mm,Die height: 300 mm, Slide adjustment: 80 mm,Bolster size: 1340 x 600 mm, Slide area: 1280 x 400 mm

Capacity: 250ton, StrokePerMinute: 45(SPM),Stroke length: 250mm,Die height: 550mm, Slide adjustment: 100mm,Bolster size: 1000x1000mm, Slide area: 600x600mm

CAPACITY 250T,STROKE 250mm,DIE HEIGHT 550mm,slide adj 200mm,speed 50spm,bolster area 1000*850,slide size 800*850,die cushion capacity 40T

Capacity: 500ton, StrokePerMinute: 20(SPM),Stroke length: 250mm,Die height: 600mm, Slide adjustment: 100mm,Bolster size: 1300x1000mm, Slide area: 1000x700mm, Motar 55kw*6P

Capacity: 400 Ton, Stroke: 400 mm, Slide Adjustment: 160 mm, Strokes Per Minute: 25 min, Die Height: 470 mm, Slide Area: 800 x 800 mm, Bolster Area: 1000 x 1000 mm, Main Motor: 40 KW

Capacity : 450t, Stroke length : 105mm, Number of stroke : 45 spm, Motor driving : 37(6P) Kw, Motor Refueling : 0.1(4P) Kw, Feed rate : 40 m/min, Machine (Height x width x length) : 2.9 x 2.3 x 3.0mm, Feeder (Height x width x length) : 1.35 x 3.375 x 7.5mm, Cutting machine weight : 31500 kg, Feeder weight : 3500 kg.

Capacity : 1000 Ton.

Capacity : 600t, Number of Stroke : 30Spm, Stroke length : 120mm, Machine Dimension : 3300*2300*3500mm, height*weight*length : 1350*3380*7500, Feeder weight : 4900kg, Machine weight : 38000kg.

Capacity: 450T, Stroke: 45 SPM, Length: 105mm, Motor drive dynamic: 45KW (6P), Supply oil: 0.4KW (4P), Feed rate : 0.25 MM/SEC, Reduction gear motor: 2.2(4P), Air pressure: 5-6kg/cm2 , Feeder: 1.35x3.375x7.5m , Machine(Weight): 34500kg, Feeder: (kg)3500, Cutting dia : 40mm ~ 85mm, Machine H x w X L(m) : 2.9x2.3x3.0,

CAPACITY : 300T

Capacity: 1600T, Stroke: 180 mm, no. of stroke at continuous: 17 spm, Permissible no. of cuts at single stroke: 15, Stop length: 100 - 1000 mm, Length of roller conveyor: 6000 mm, Speed of roller conveyor: 0.3/0.6 m/s, Main Motor rating: 110 kW, Net weight approx: 84,000 kg

Capacity: 200 Ton, Stroke Length: 50 mm, No.of Stroke: 80 spm, Brake: Band brake, Main Motor: 30 kW.4P.220 V, Refueling System: Concentrated Automatic Circulation Refueling System, Control Panel: NC Type ECO-FI Control unit Incorporation, Ram Stroke Type: Integrated Direction Type, Air Pressure: 4-5 kg/sq. cm ACCESSORIES: 1.Air Pressure Reduction Detection Device 2.Refueling Abnormal Detector 3.Cutting Zone Safety Cover 4.Digital Cutting Number Counter CUTTING JIG SPECIFICATION: Model: JMN-200, Cutting Method: Axial Direction Pressurisation Restriction Cutting, Cutting Blade Shape: Upper Blade:Round, Lower Blade: Round, Max Cutting Diameter: dia. 60 mm (S10C), Min.Cutting Diagram: dia. 25 mm, Max.Cutting Length: 200 mm, Min.Cutting Length: Blade Thickness + 2 mm, Material Detector: Air Pressure Detector, Sizing Device: Full Automatic Digital Sizing Device, Dimension Fixing Device: Magnetic Lock Device, Sizing Motor: 0.75 kW.4P.220 V, Blade Change System: Die Set System, Die Set Exchange Time: Quick Change (Approx.1.min), Die Set Fixing Method: BT Pascal Clamp, Blade Life: 8000-12,000 pcs, Blade Adjust Tolerance: Upper 6 mm, Lower: 20 mm, Blade Clearance Adjustment: Manual Handle, Terminal Processing Method: Full Auto Non-Error Method ACCESSORIES: 1. Rear Clamp 2. Stopper Head Screw 3. Cassette Holder Extended Rail 4. Digital Production Counter 5. Terminal Processing Skute MACHINE VIDEO: https://youtu.be/IkNRWBkEmBY

Capacity: 300ton, Stroke per minute: 40SPM, stroke length: 90mm, motor driving(KW):37(6P), refueling(KW):0.4(4P), Feed rate:30m/min, Deceleration motor:2.2(4P),amount of air:45Nl/per, machine height2.5xwidth1.6xlength2.6mm, cutting machine weight:17000kg, feeder weight:2700kg

Capacity:1400t, Die height:580, stroke:155, Motor:20HP, RPM:970, Job length:100-850 [NOTE: We have included the before dismantled and after dismantled photos]

Capacity: 1250T, Allowable max capacity: 1600T, Regular maximum Capacity:1400T,Effective forming Energy:20.0t-m,Bed Effective Area width-Depth: 900mmX1060mm,Screw Diameter: 315mm, No. ofstroke:24spm,Workstroke:36spm,SlidesizewidthDepth:900mmX1060mm,AirPressure:5kg/cm, Shutheight:850mm,Daylight:1250mm.

CAPACITY : 2000 KN, STROKE LENGTH : 300 mm, SHUT HEIGHT : 525 mm,BED AREA(FB x LR) : 650 x 580, MAIN MOTOR : 18.5 KW.

Capacity: 200Ton.

Capacity : 2000T, Stroke: 670 mm, Number of strokes: 14spm, Daylight: 1650 mm, Table dimensions (left and right * front and back) : 1150 * 1400mm, Bottom surface of the slide (left and right * front and back) : 1000 *1350mm.

Capacity : 1000T, Stroke: 475 mm, Number of strokes: 2 spm, Open height: 1250 mm, Table dimensions 900 x 1100mm

Capacity: 2500T, Allowable max capacity: 3750 T, Screw Diameter: 540 mm, No. of stroke: 15 spm, Work stroke: 10 spm, Stroke: 750 mm, Daylight: 1850 mm, Allowable Eccentricity: 470 mm, Table size: 1250 x 1500 mm, Slide size: 1250 x 1500 mm, Knockout Capacity: 20T, Knockout Stroke: 100 mm, Motor: 220 kw/30 kw, Size: 6600 x 6000 x 9100 x 2800 mm

Capacity: 2000T, Allowable max capacity: 3000 T, Screw Diameter: 480 mm, No. of stroke: 16 spm, Work stroke: 10 spm, Stroke: 670 mm, Daylight: 1650 mm, Allowable Eccentricity: 420 mm, Table size: 1150 x 1400 mm, Slide size: 1000 x 1150 mm, Knockout Capacity: 20T, Knockout Stroke: 100 mm, Motor: 160 kw/30 kw, Size: 6200 x 5500 x 8500 x 2800 mm

Capacity: 1000T, Allowable max capacity: 1500 T, Screw Diameter: 340 mm, No. of stroke: 24 spm, Work stroke: 15 spm, Stroke: 475 mm, Daylight: 1200 mm, Allowable Eccentricity: 290 mm, Table size: 900 x 1100 mm, Slide size: 800 x 900 mm, Knockout Capacity: 10T, Knockout Stroke: 100 mm, Motor: 90 kw, 18.5 kw, Size: 5100 x 4700 x 6800 x 2000 mm

Capacity: 800ton,Screw Diameter: 280mm, Ram Stroke: 425mm, Table size: 710 x 900mm, Daylight: 1135mm

Capacity: 300 Ton, Stroke Length: 500 mm, Die Height: 515 mm, Open Height: 1015 mm, Bolster Area: 440 mm * 1000 mm, Slide Area: 400 mm * 1000 mm, Main Motor: 30 KW * 4P, Height: 4520 mm, Width: 2600 mm, Depth: 1950 mm.

Capacity: 1000 Ton, Adjusting Range of Capacity: 300 ῀ 1000 Ton, Die Height: 1200 mm, Stroke: 600 mm, SPM: 20, Table Size: 1000 mm * 1000 mm, Slide Size: 850 mm * 850 mm, Bottom Knock Out Type � Hydraulic Type, Bottom Knock Out Capacity: 5 Ton, Bottom Knock Out Stroke: 100 mm, Top Knock Out Type � Mechanical Type, Top Knock Out Capacity: 3 Ton, Top Knock Out Stroke: 50 mm, Pump Vane Type: 1000 RPM, Main Motor: 75 KW, Motor for Hydraulic Line: 7.5 KW

Capacity:1600N, S:700mm, strokes per minute:10, Die height:550mm, Bed size: 1100x1250mm,132KW,4KW

capacity:2500t, Slide:800mm,stroke per minute:9SPM, Die height:680mm, Bed size: 1200x1560mm, 110KWx2, 4KW

Capacity: 3000T

Capacity : 250 ton, 200Vlots,50HZ,110A

Capacity:800ton

Pressing force: 1000TON Daylight: 2300 Stroke: 1300 Table area: 2000X1500

Capacity: 10000T, Maximal force : 10,000 ton, First stage force : 4,000 ton, Second stage force : 6,000 ton, Third stage force : 10,000 ton, Working stroke : 2,500 mm, Free stroke speed : 0,3 m/sec, Loaded stroke speed : 0,07 m/sec, Table dimensions :11,200X4000X680 mm, Table mooving speed : 0,2 m/sec, Total weight approx : 2,290 ton

Capacity : 12000T, Bolster size : 6000*2500, Manipulator : 400T

Press type :oil hydraulic press 4 column push down Max forging force : 13,000t Internal size : 6.5*8.0m Manipulator: 450t- m

CAPACITY : 8000T,Press type :oil hydraulic press, 4 column push down, Max forging force : 10,500t Internal size : 5.15*7.5m Manipulator:240t- m

Capacity : 3000T, 2- pillar Hydraulic press, Internal size : 2900 x 3000mm.

Capacity(Ton) : 700, Stroke (mm) : 1100, Down speed(mm/min):　8000, UP speed(mm/min) :　9700, Press speed(mm/min):　1280, Dielight (mm) : 1600, Bolster Area (mm) : 1700*1200, Main Motor (kw)　: 45kw * 6P * 4

Capacity: 1000T, Stroke: 1500mm, Stroke Speed: 15 - 50 SPM, Daylight: 2500mm, Bed Size: 1260 x 2600mm, Main Motor: 250kw x 6P x 2, with 2ton Manupurator

Capcity : 630t, Stroke : 270mm, Die Height : 606mm, Bolster Area : 1350 x 850mm.

Capacity : 800t, Stroke length : 400mm, Number of stroke : 15~30 spm, Bolster dimension (left and right x front and back) : 1040 x 1280mm, Slide dimension (left and right x front and back) : 1040 x 1280mm, Die height : 1200mm, Slide adjustment : 50mm, Main motor : 185kW, Maximum stop time : 285ms, Supply air pressure : 0.5MPa.

Capacity (T): 3000, Stroke (mm): 360, Slide Adjustment (mm): 10, Strokes Per Minutes (min): 21~60, Die Height (mm): 1000, Slide Area (mm): 1250 * 1170, Bolster Area (mm): 1350 * 1260, Main Motor (kw): 150 * 6, SLIDE KNOCKOUT- Capacity(t): 12, Pin Dia(mm): 60, Pin No: 2, BED KNOCKOUT - Capacity(T): 20, Pin Dia(mm): 80, Pin No: 3, DIE CUSHION - Capacity (T): 3000, Stroke(mm):　80, Pin Diameter(mm):　80, Pin no.(EA):　3, TRIMMING PRESS - Manufacture: KURIMOTO, Model: S2-300, Capacity (T): 300, Y.O.M : 1970 Stroke (mm): 250, Slide Adjustment (mm): 100, Strokes Per Minutes (min): 50, Die Height (mm): 650, Slide Area (mm): 1000 * 1100, Bolster Area (mm): 1100 * 1000, Main Motor (kw): 　 30 * 6, DIE CUSHION - Capacity (T): 30, Stroke(mm):　100,　 Pin no.(EA):　1

Capacity: 2500 T, Stroke: 320 mm, Strokes per minute: 65 SPM, Die Height: 879.5 ~ 886.5 mm, Ram Adjustment: 7 mm, Bolster Area: 1335 x 1400 mm, Adapter plate area: 1040 x 1100 mm, Bottom Knockout capacity: 12T x 2, Bottom Knockout stroke: 80 mm, Upper Knockout capacity: 5T, Upper Knockout Stroke: 40 mm, Main motor: 110 kW

capacity: 2500ton, In the year 1990 hot forging press is changed as warm forging press. Four stage Auto transfer press with Die holder and Induction heater,length of the stroke: 360mm, Stroke per minute: 15SPM, Ram adjustment: 10mm, Shut Height:876/890mm, Bolster area: 1340x1400mm, Slide size:1040 x 1100mm, Knock-out stroke: 100mm, Motor:110KW, Mass Weight:180ton. Induction heater : Make : Mitsubishi, Power: 600KW

TECH CAPACITY : 1000T

Capacity : 1000T, Sliding stroke: 400 mm Shut height: 1170 mm Die height: 920 mm Slide adjust dimension: 100 mm Number of strokes: 16-40 RPM Ball star dimensions: 1600 mm x 900 mm x 250 mm Slide dimensions: 1600 mm x 900 mm Dimension between columns: 1700 mm Opening again: 1400 mm   ● Transfer specifications Feed line height: 900 mm Feed stroke: 300 mm Clamp stroke: 40 mm Lift stroke: 3 mm

Capacity:1000ton, Stroke:240mm, Stroke per minute:100spm, DieHeight:650mm, Work stroke number:25, bed area: 900x1000 SL: 800x800

Capacity : 630t, Stroke length : 220mm, Number of stroke : 25~40spm, Die height : 500mm, Slide adjustment : 15mm, Slide dimension(left and right x front and back) : 700 x 600mm, Bolster dimension(left and right x front and back) : 800 x 700mm, Main motor : 45kw, Supply air pressure : 5kgf/cm square, Maximum stop time : 220ms.

Capacity: 600 T, Stroke: 148 mm, SPM: 40, Die Height: 540 mm, Bolster size: 630 mm * 900 mm * 120 mm, Slide size: 540 mm * 600 mm, Slide Adjustment: 50 mm, Motar : 37 Kw.

Capacity : 630mm, Stroke length : 220mm, SPM : 40spm, Die height : 500mm, Die adjustment : 15mm, Bolster area : 800 x 700mm, Slide area : 700 x 600mm, Main motor : 45kw, Voltage : 220V.

Capacity : 800t, Number of strokes : 32spm, Stroke length : 170mm, Die height : 750mm, Bolster dimensions (left and right x front and back) : 480 x 600mm.

Capacity : 400T, Number of strokes : 45spm, stroke length : 140mm, Die height : 420mm, Slide adjustment amount : 15mm, Slide dimensions (left and right x front and back) : 370 x 500mm, Bolster dimensions (left and right x front and back) : 480 x 600mm, Motor : 30KW X 4, Maximum stop time : 190ms, Voltage : 220V.

Capacity : 400T, Number of strokes : 45spm, stroke length : 140mm, Die height : 420mm, Slide adjustment amount : 15mm, Slide dimensions (left and right x front and back) : 370 x 500mm, Bolster dimensions (left and right x front and back) : 480 x 600, Motor : 30KW X 4, Voltage : 220V. BILLET SHEARING - MODEL : CM65-AN, MAKE : AMADA, SPECIFICATION : Blade Size : Ø250～285mm, Diameter of Saw Blade : Ø285mm, Cutting capacity : 10-65mm, With bar feed : 6 M, Body thickness : 1.75mm, Bore : 40mm, Pin Holes(PCD) : 2or4/11/80, Main motor : 7.5 HP.

Capacity: 2000T ,Stroke Length: 220mm, Die height: 850mm ,Slide Adjustable Length: 15mm, SPM:18spm, Bolster dimensions: 900X1000mm, Slide dimensions (left and right x front and back): 900X1000 mm,Main Motor:150kW.

Capacity : 300T, Stroke length : 140mm, Number of Stroke : 50spm, Die Height : 400mm, Slide adjustment : 40mm, Bolster dimension (left to right x front to back x thickness) : 450 x 700 x 90mm, Slide dimension (left to right x front to back) : 470 x 480mm.

Capacity : 600T, Stroke length : 160mm, Number of Stroke : 40spm, Die Height : 520mm, Slide adjustment : 50mm, Bolster dimension (left to right x front to back x thickness) : 630 x 900 x 120mm, Slide dimension (left to right x front to back) : 540 x 600mm.

Capacity:450 T, Stroke length: 160 mm, Die height: 460 mm, Number of strokes : 45 spm, Bolster area: 560x800x100 mm, Slide area: 500x540 mm

400ton Stroke length: 200 Stroke number: 25?50spm Number of intermittent strokes: 25spm DH: 500 Bolster dimensions: 700*600*100

Capacity: 250ton Stroke: 200mm spm: 40 Die height: 490mm Bolster: 800x800mm

CAPACITY : 800t,SLIDE STROKE : 210mm/ Max 34 SPM,DIE HEIGHT : 600mm,ADJUST DIMENSIONS : 65mm,BOLSTER DIMENSIONS : 1200*830*140,SLIDE DIMENSIONS : 1160*740,BED KNOCKOUT (S/C) 70mm/60ton,MAIN MOTOR : 75kw,MACHINE WEIGHT : 72,000kg

CAPACITY:400T,SPM:45,SLIDE MOVEMENT:600*500mm,DIE HEIGHT:420mm

Capacity: 800T Stroke: 140mm Die height: 750mm Adjustable dimensions: 60mm Number of strokes: 30 rpm Bolster dimensions (left and right x front and back x thickness): 850 x 1000 x 150 mm Slide dimensions (left and right x front and back): 760 x 800 mm

Capacity : 630t, Stroke Length: 140, Stroke : 40 spm , Bolster size : 560 * 700,Slide size : 430 * 600, Die Height : 370, Slide Adjustment : 15,Main Motor Power : 37KW

BDC: 7MM Stroke length: 250MM SPM: 25-40 spm Die height: 750MM Bolster area: 1100x1100mmxT: 250mm Slide area: 1100x1100mm Slide adjustment: 30mm Stage: 5 Distance between stages: 170MM Main motor: 75kw Voltage: 440V 220V 60Hz Weight: 80ton

Stock code: 2620-00 S: 200 35spm (fixed / at 50Hz) DH: 550 Adj: 50 SL: 700 * 800 BL: 800 * 800 With mechanical BKO

S: 160mm 30-45 spm DH: 420mm Slide adjustment amount 15 mm Slide dimensions: 600 * 500 Bolster dimensions: 700 * 600 * Transfer device * Ray safety device ?load cell

Capacity : 400t, Stoke length : 90mm, Number of stroke : 52spm (fixed) Die Height : 350mm, Slide Adj: 15mm, Slide dimension : 370*500mm, Bolster dimension :480*600mm, with slide knockout, with bed knockout.

S: 200 30spm DH: 515 Adj: 15 SL: 700 * 600 BL: 900 * 850 Bed Knock: 80ton * 100mm Main motor: 90kw

CAPACITY: 630TON STROKE: 180 MM SPM: 45 DIE HEIGHT: 520 MM SLIDE ADJUST: 50 MM BOLSTER: 800 X 700 MM

Capacity : 220t, Stroke length : 60mm, Number of stroke : 45spm, Die Height : 300mm, Slide Adjustment : 30mm, Slide dimension : 400 x 360mm, Bolster dimension : 430 x 500 x 1000.

Capacity:450 T, Stroke length: 160 mm, Die height: 460 mm, Rotational per speeed: 45 rpm, Bolster area: 560x800x100 mm, Slide area: 500x540 mm, Main motor:37 KW,

Capacity:450 T, Stroke length: 140 mm, Die height: 380 mm, Rotational per speeed: 20 rpm, Bolster area: 560x800x100 mm, Slide area: 500x540 mm, Main motor:22 KW, With AUTO MACHINE

Capacity : 400t, Stroke Length: 140, Stroke : 45 spm , Die Height : 370, Slide Adjustment : 15, Slide size : 370 * 400, Bolster size:: 480 * 600

Capacity: 300ton, stroke: 85mm, SPM:50, die height: 400mm, Number of adjustment: 40mm, bolster size: 480x700x90mm, slide size:470x480mm,

Capacity: 800t, Stroke length:140, Number of strokes: 29, Bolster: 850 x 1000 x 150 ,Bolster: 760 x 800, Knockout: 40t,Stroke: 70

Capacity : 630T, Stroke : 220mm, Stroke per minute : 25~45spm, Die Height : 550mm, Slide Adjustment : 50mm, Slide Area : 800*600mm, Bolster Area : 800*700mm,

Capacity: 630t, Strock :180mm, Die Height: 600mm, Slide Adjustment : 60mm, SPM :30, Bolster area: 1100x780mm, Slide area: 1090x680mm, Motor capacity: 55 Kw

AIDA-800 TON,STROKE.250 MM,DIE HEIGHT.570MM,ADJ.20MM,SL.800X700MM,BL900X800MM,SPM40MM

cold forging 800-ton,storke.250mm,die height.600mm,adjust.50mm,spm.20~40,slide.900x1000mm,bolster size.900x1000mm

COLD FORGING-800 -TON,STROKE.400mm,DIE HEIGHT.1000mm,ADJUST.150mm,SPM.25mm,SLIDE.1000X650mm,BOLSTER SIZE.1000X750mm.

Capacity: 800T, SPM: 5.13 - 25, Stroke length: 400 mm, Die height: 1000 mm, Slide adjustment: 50 mm, Slide size: 900 x 1000 mm, Bolster size: 900 x 1000 x 150 mm

Capacity: 1500T, Ability outbreak position above bottom dead center: 9 mm, Stroke length: 250 mm, Die Height: 1030 mm, Slide Adjustment: 50 mm, Stroke speed: 25 - 40 spm, Slide size: 1100 x 1100 mm, Bolster size: 1500 x 1100 x 300 mm

Capacity: 800T, Ability Outbreak Position above bottom dead center: 7 mm, Stroke Length: 300 mm, Die Height: 770 mm, Slide Adjustment: 30 mm, Stroke Speed: 25 - 36 mm, No. of Stations: 7, Station Interval: 225 mm, Slide size: 1800 x 700 mm, Bolster size: 1850 x 900 x 200 mm

Capacity: 600 T, Stroke: 160 mm, SPM: 40, Die Height: 520 mm, Bolster size: 630 mm * 900 mm * 120 mm, Slide size: 540 mm * 600 mm, Slide Adjustment: 50 mm Machine Video https://youtu.be/46LpupYbPu8 https://youtu.be/8YLcFYtWc1I https://youtu.be/PR5r7SsEVnI

Capacity: 1500 T, Stroke: 220 mm, SPM: 20, Die Height: 750 mm, Bolster Area: 780 mm * 1000 mm, Slide Area: 700 mm * 1000 mm, Slide Adjustment: 15 mm, Bolster Thickness: 200 mm, Knock out Capacity: 75 Ton * 3, Knock out Stroke: 70 mm.

Capacity: 400 Ton, Slide Stroke: 140 mm, No.of Stroke: 40 S.F.N, Table Size (Left & Right)*(Front & Back): 550 mm * 660 mm, Bolster Size (Left & Right)*(Front & Back): 550 mm * 650 mm, Slide Size: (Left & Right)*(Front & Back): 400 mm * 500 mm, Die Height: 400 mm, Slide Adjustment: 20 mm, Main Motor: 30 KW * 6P.

Capacity: 400 T, Stroke: 140 mm, SPM: 45, Die Height: 370 mm, Bolster Size (Left & Right)*(Front & Back): 480 mm * 600 mm, Slide Size: (Left & Right)*(Front & Back): 370 mm * 500 mm,, Slide Adjustment: 15 mm, Main Motor: 30 KW.

Capacity: 630 T, Stroke: 220 mm, SPM: 25 ~ 40, Die Height: 550 mm, Bolster Size (Left & Right)*(Front & Back): 800 mm * 700 mm, Slide Size: (Left & Right)*(Front & Back): 700 mm * 600 mm,, Slide Adjustment: 15 mm, Main Motor: 45 KW.

Capacity: 630 T, Stroke: 220 mm, SPM: 25 ~ 40, Die Height: 550 mm, Bolster Size (Left & Right)*(Front & Back): 800 mm * 700 mm, Slide Size: (Left & Right)*(Front & Back): 700 mm * 600 mm,, Slide Adjustment: 15 mm, Main Motor: 45 KW.

Capacity: 1000 Ton, Stroke: 170 mm, SPM: 32, Die Height: 470 mm.

Capacity: 250 T, Stroke: 140 mm, SPM: 38-75, Die Height: 400 mm, Bolster Area: 1250 mm x 620 mm x 100 mm, Slide Area; 600 mm x 400 mm, Slide Adjustment: 40 mm. (Ref.No-H0087)

Capacity (T) : 400, Stroke (mm) :140, SPM : 40, Die Height (mm):370, Slide adjustment(mm):370*400, Bolster Area(mm):480*600

Capacity: 400T, Stroke: 160mm, Stroke speed: 50spm , DH: 460mm, SL: 700x500mm, BL: 700x600x100mm

Capacity: 1500 T, Slide Stroke: 250 mm, Die height: 755 mm, Slide Adjustment: 25 mm,Number of strokes: 22 spm 60 Hz,Slide size:1170 x 925 mm (RL x FR),Bolster size:1170 x 1220 mm(RL x FR),Air Pressure: 5.0 kg/sq.cm,Max machine height: approx. 7800 mm,Total machine weight: 95 T

Nominal force: 2500 tons, Ram stroke: 190 mm, Number of strokes in 1 minute: 14-20 , Shut height: 800 mm, Bolster plate-to-ram adjustable stroke: 15, Table size: 1250x1400 mm, Ram size: -Front-to-back: 900 mm, -Left-to-right: 1250 mm, Lower knockout: -Stroke: 50 mm, -Force: 100 kN, Upper knockout: -Stroke: 40 mm, -Force: 100 kN, Main motor: 77 kW, 380 V, Overall dimensions: 4770x3050x5890 mm, Weight: 125 tons

Capacity: 400T,Work Start-7mm,Stroke Length: 160 mm, Strokes per minute: 50 spm, Die Height: 460 mm,Slide Adjustment: 40mm,Slide size: 700 x 500 mm, Bolster size: 700 x 600 mm,Bolster thickness-100mm,shank hole diameter-50mm,BKO stroke-80mm,BK) capacity-20T,Max.Upper mould weight-300kg,use pressure-5kg/sqcm,Power supply-200/220V,50/60Hz,Main Motor-30kw x 4P,Lubricant pump-750W x 4P,slide adjustment motor-750 x4P

Capacity:630T,Rated Speed:45 SPM,Stroke:220mm,Die Height:520mm,Die Adjustment:50mm,Slide size:800*600, Bolster size:1000*700*120mm

Capacity:800T, Stroke length:140mm, Stroke speed:29 SPM, Bolster size:850x1000x150mm, Slide size:760x800mm, Slide Adjust: 60mm , Die height:750mm, shunk hole diameter:60x200mm, Bed knockout capacity:40T, Bed knock out stroke:70mm, Power supply:200/220V, 50/60Hz, Main motor:55KW. Weight : 35 Ton

Capacity: 250ton,Stroke: 140mm,Speed: 55 spm,Die height: 400mm,Slide adjust: 40mm(electrical),Slide size: 600 x 400mm,Bolster size: 600 x 500mm

Capacity: 400ton,Stroke: 140mm,Speed: 45 spm,Die height: 370mm,Slide adjust: 15mm,Slide size: 370 x 500mm,Bolster size: 480 x 605mm

1000T

S: 90 50spm DH: 360 BL: 450 * 700 * 900

capacity:400ton, slide adjustment:160mm, stroke per minute:40~70SPM, Die height:420mm, slide area:600x500mm, bolster area:700x600mm, motor :45KW

capacity:1000 ton, stroke length:250mm, SPM:25-35mm, die height:600mm, bolster area:1500x1100mm, slide area:1500x1200mmm

Capacity: 300ton, stroke: 90mm, SPM:50, die height: 360mm, Number of adjustment: 40mm, bolster size: 450x700x90mm, Length of the stroke:140mm, slide size:470x480mm, Immediate stop time:200ms, Maximum stop:220ms

capacity 400t Stroke 160mm The number of strokes 50spm Die height 460mm

Stroke:90mm, Stroke per minute:65spm, Die Height:340mm, Slide Adjustment: 30mm, Slide area: 400x360mm, Bolster area:430x600mm

Capacity: 1000 T, Stroke: 140 mm, Stroke per minute: 35 SPM, Die Height: 450 mm, Slide Adjustment: 15 mm, Bolster area: 680 x 960 mm, Slide area: 480 x 800 mm, Motor: 55 kW

capacity: 400ton, stroke:200mm, Slide adjustment:40mm, Stroke per minute:20-30, die height 390mm, slide area:450x480mm, bolster area:dia480,Knock Out/Capacity:30(ton),Knock Out Strok:127(mm), main motor:45KW with die cushion

Capacity: 1600, stroke:180mm, slide adjustment:16mm, strokes per minutes:25min, Die height:550mm, slide area:1000x1000mm, Bolster area: 1000x1000mm, with knock out.

Capacity:300, stroke:200mm, Slide adjustment:40mm, Strokes per minute: 40mm, Die height:450mm, slide area: 470x480mm, Bolster area:450x700mm, Mainmotor:22kw, with knock out, knock out stroke:100mm

Capacity: 600t, Die Height: 420mm, RPM :40, Bolster area: 630x900mm, Slide area: 540x600mm, Motor capacity: 37kw

Capacity: 450 T,Stroke: 160 mm, Die height: 460 mm, Slide adj: 40 mm,Stroke per min: 45 spm, Bolster size: 560*800*100 mm,Slide size: 500*540 mm, Motor: 37 kw

Capacity : 400t, Number of stroke : 45spm, Stroke length : 160mm, Die height : 420mm, Slide dimensions (left to right x front to back) : 600 X 500mm, Bolster dimensions (left to right x front to back) : 700 X 600mm.

Capacity : 400T, Stroke length : 90mm, Number of Sroke : 52spm, Die Height : 350mm, Slide adjustment : 15mm, Bolster dimension (left to right x front to back) : 480 x 600mm, Slide dimension (left to right x front to back) : 370 x 500mm, with bed knockout.

Pressure Capacity : 400t, Bolster : 600 * 600mm, Side opening : 550mm, Open height : 770 mm, Stroke : 400mm, Maximum working pressure : 252 kgf/cm square, Oil tank capacity : 300L.

CAPACITY: 600t STROKE: 450m OPEN HEIGHT: 1,150mm BOLSTER M2: 1,000mm X 900mm SLIDE M2: 1020mm X 850mm * 5AXIS control servo

CAPACITY : 500T,OUT FORCE : 500~5000KN,OTHER DIMENSIONS (left and right * front and back) : 600*800mm,OPEN HEIGHT : 600mm, STROKE LENGTH : 200mm, PULLING FORCE : 300KN,ACCELERATION : 5~12 mm/sec, MAXIMUM WORKING PRESSURE : 20.6(MPa), 3 AXIS.

Capacity : 200T, Stroke length : 400mm, Open height : 750mm, Bolster dimension (left to right x front to back) : 600 x 600mm, Slide dimension (left to right x front to back) : 600 x 600mm.

Capacity: 600T, Strok : 300, Die Height: 500mm, Bolster Size: 1000 * 950mm, Slide Size: 950 * 650mm

Capacity: 1000T, Strok : 500, Die Height: 1500mm, Bolster Size: 1000 * 1000mm, Slide Size: 1000 * 1000mm

Capacity 1200T, Hydraulic Cold Forging Press, Die cushion capacity 100T, Stroke (mm) 800, Max die high (mm) 1400, Table (mm)1150*1410 mm, Down speed：300mm/s, Pressurized speed：7-18mm/s, Total weight：about 56 ton

Cold Forging Hydraulic Press:- 2 Units, Capacity: 300 Ton, Stroke: 150 mm, Bolster Area (Left & Right)*(Front & Back): 400 mm * 400 mm, Slide Size: (Left & Right)*(Front & Back): 400 mm * 400 mm, Day Light: 400 mm, Machine Weight: 10000 kg, Tank Volume: 100 Liter, Main Motor: 18.5 KW.P

Cold Forging Hydraulic Press:- 2 Units, Capacity: 300 Ton, Stroke of Slide: 150 mm, Bolster Area: 400 mm * 400 mm, Day Light: 470 mm, Max.Work Speed: 250 mm/sec. (Ref.No-H0111)

Pressure Capacity: 400 ton,Stroke Length: 400 mm,Max. Descending Speed: 220 mm/sec,Over Drop Distance: 11.5 mm,Stopping Time: 69.3 ms,Daylight: 900 mm

Hydraulic Press, cap:315T, S:400mm, Shut height:210mm,die length:610mm,slide:500x600, bolster:500x600,bed KO stroke:200mm,bed KO capacity:25ton

Make: NEAGARI,JAPAN Year Of Manufacture: 1992,Max Capacity:1000 T, Stroke:1100 mm, Daylight(Max Opening):1300 mm, Down Speed:200 mm/sec, Pressing Speed:16 mm/sec, Up Speed:140 mm/sec, Bolster Area:940 x 1000 mm(LR x FR),Bed Knock:Modified Hyd-Cylinder Type (100Ton x 150 St), Power Source　AC 220 V,3￠ (Main Pump 75Kw X2, K/O Pump 37Kwx1), Total Weight:About 46 Tons. Please note that the machine has been OVERHAULED. Mechanical & Hydraulic Parts: New Bolster(Included Pressure plate),Slide Machining(New Pressure Plate),Bed Machining, New Hyd-Packing,Hyd-Cylinder & Ram - renewing, Modified Bed Knock-Out- Hyd-cyl

Capacity: 1000 T, Stroke length: 800 mm, Bolster area: 1000 x 1000 mm, Slide area: 1000 x 1000 mm

hydraulic press, Capacity:800ton,length of Stroke:295mm, die height:680mm, bolster area:1100x690mm, Downstroke:187mm/S, Pressure speed:9mm/S, Motor:22KWx4P

Capacity: 2000ton, maximum stroke:900mmm, daylight:2300mm, area of table:1850x1850mm, Maximum pressure:210

Capacity : 1000t, Stroke length : 500mm, Number of stroke : 15~20 spm, Bolster dimension (left and right x front and back) : 1000 x 1200mm, Slide dimension (left and right x front and back) : 1000 x 1200mm, Die height : 800mm, Slide adjustment : 30mm.

Capacity : 630t, Stroke length : 400mm, Number of stroke : 15~25 spm, Bolster dimension (left and right x front and back) : 800 x 1050mm, Slide dimension (left and right x front and back) : 800 x 1050mm, Die height : 800mm, Slide adjustment : 50mm, Main motor : 90kW, Maximum stop time : 243ms.

Capacity : 400t, Stroke length : 220mm.

Capacity : 800t, Number of strokes : 15~35spm, Stroke length : 300mm, Die height : 700mm, Slide adjustment amount : 50mm, Slide dimensions (left and right x front and back) : 1100 x 900mm, Bolster dimensions (left and right x front and back x thickness) : 1100 x 900 x 150mm, Maximum stop time : 260ms, Electric Motor : 0.4KW X 4P.

Capacity: 800t ST: 300 13 to 35 spm DH: 670 SL: 1500×1000 B: 1500×1100×300 slide knockout 10t Die cushion 60t

CAPACITY : 2500KN(250ton),SLIDE STROKE : 200mm/Max SPM : 25~40,DIE HEIGHT : 500mm,SLIDE ADJUSTMENT : 50mm,OVERUN SETTING POSITION : 315,MAX.DOWNTIME : 210ms,BOLSTER AREA : 1100*564,MAIN MOTOR : 30kw.

CAPACITY:250T,SPM:15-80,ROKE LENGTH:30eL,FRONT*BACK*THICKNESS:600*500*240

CAPACITY: 630T, STAGE: 2 POINT, STROKE: 250mm, SPM: 20-40,DIE HEIGHT: 710,SLIDE ADJUSTMENT: 50, BOLSTER SIZE: 1400*1000*120, SLIDE SIZE: 1000*900

Capacity: 1250T, SPM: 5.15 ~30, Stroke length: 350 mm, Die height: 700 mm, Slide adjustment: 50 mm, Bolster size: 1400 x 1200 x 220 mm, Slide size: 1400 x 1200 mm, Press Weight: 75 Ton, Other Accessiories Weight : 20 ton

Capacity : 6 t, Standard dropping section weight(upper mold not included) (kg) : 6200,Standard upper section weight(Nominal value) (kg) : 1800,Stroke（ｍｍ）: 1300, Cylinder diameter : 580 mm, Piston diameter : 210 mm, Impact energy : 22415 kg-m (≈219.8ｋJ), Distance clear between guides : 795 ｍm, Lower ram surface : 795 W x 1006L mm, Upper sow block surface : 880 W x 1200L mm, Inlet Pipe Size : 125A (5B), Exhaust Pipe Size : 200A (8B), Required Air Compressor Capacity ; >535 Kw, Maximum Air Pressure : 7 Kg/cm2.

CAPACITY : 40 ton COUNTERBLOW HAMMER, -Condition:Fully refurbished in 2014~2015 -Technical specification Distance between Upper and Lower Ram (max.) :2400MM,(without tool) Dimension of Lower Ram : 1700x2230x2100 MM, Dimension of Upper Ram : 2310x2150x3500 MM, Distance between slides (free opening) : 1280 MM, Dimension of the connecting pipeline (outside diameter and wall thickness) at the inlet : 324/8 MM, at the exhaust port : 324/8 MM, at the control inlet : 34,2/3,2 MM, Dimension of the machine Height above ground level : 6800 MM, Width : 2800x4840 mm, Depth : 3600 mm , Base plate :3600x5300 mm , Foundation pit : 13600x8700 mm , Lower Ram weight : 47,260 kg, Upper Ram weight : 45,170 kg,

2.5t Hammer

3T Hammer Standard Dropping Section Weight : 3200kg, Standard Upper Mold weight : 540kg, Inpact Energy : 10900kg, Minimum Safe mold thickness : 400mm, Max. Stroke : 1200mm, Right to Left Ram Guide : 690mm, Lower Ram Surface Size : W 690*L 710mm, Upper sawblock surface size : W 725*L 915mm, Inlet Pipe Size : 100 Exhaust Pipe Size : 150 Floor to Machine Top : 5751mm, Overall Height : 6781mm, Piston Rod Removal Height from Floor Length : 8100mm, Minimum Compressor Output : 150Kw, Maximum operating pressure : 7kg/cnf

Capacity: 5.5 Ton, Ram weight: 5500 kg, Maximum Stroke: 1250 mm, Diameter of air supply pipe: 7 inch / 175 mm, Diameter of Exhaust Pipe: 8 inch/ 200 mm, Maximum Pressure: 7 kg/sq.cm, Compressor Capacity: 600 HP, Anvil Weight: 100,000 Kg, Total Weight: 175,000 Kg

2 ton.

0.5 ton.

Inner Segment Outer Dia : 460mm, Inner Segment effective width : 570mm, External Mouth – Diameter : 460mm, Side roll effective width : 210mm, Interval adjustment : 6mm, Number of wheel rotations : 65 rpm, Double rotation power : 2800Kgm Material Dimensions : 75mm angle Air Pressure : 5~7kg/cm1 Machine Weight : 9.5T Manipulator Type : RAF-46 Type 4 pass all automatic manipulator Stroke Length : 600mm, Transverse pitch : 70~130mm,(can be set at 1mm pitch) Cycle Time : 60 Roll Body and mechanical movement Lateral devastation : AC Servo System Measure before chuck : 100mm, Siding : Collection pump method Chuck type : 2 clawed chucks Lateral Movement : 11KW Servo Material Supply : Hydraulic cylinder Product discharge chute : sloping down chute Air Pressure : 4.5~5.5kg Machine Weight : 5.5T

Forging Roll-SPEC:- Outer Dia of Roll: ⌀ 460 mm, Inner Dia of Roll: ⌀ 280 mm, Width of Roll: Max 580 mm, Distance between Roll Shaft: 456 ~ 466 mm, Adjust of Roll Distance: 10 mm, Roll Rotation Speed: 55 RPM, Material Forging Force: ⌀ 85 mm, Main Motor: 22 KW * 4P Totally Closed FAN, Air Pressure: 5 Kg/cm3, Machine Weight: 14 Ton Manipulator-SPEC:- Material Feeding Capacity: ⌀ 85 mm, No.of process: Max. 8 Stage, Arm Shaft Stroke: 600 mm, Cross Feed Stroke: 350 mm, Main Drive System: Mechanical Drive, Hydraulic Pump: 80 kg/cm3, 87 L/min, Oil Tank: 300 L, Motor for Hydraulic Unit: 15 KW * 4p Totally Closed FAN, Machine Weight: 5 Ton.

Mode of Operation: Mechanical, Die Diameter: 895.35 mm, Die Width: 304.8 mm, Roll Neck Diameter: 406.4 mm, Roll Speed RPM: 25, Maximum Usable Periphery: 2082.8 mm, Roll Adjustment: 19.05 mm, Driving Power: 185KW * 6p, Fllor Space(L to R, F to B): 3100.8 mm * 3596.3 mm, Height: 3933.4 mm, ROLLER CONVEYOR - Manufacture: VORONEZH, Capacity: 200 kg, Arm Movement Stroke: 3000 mm, Arm Movement Speed: 0.7 m/s, Arm Movement Precision: 2 mm, Gantry Movement Stroke: Control Program, Gantry Movement Speed: 1.25 m/s, Gantry Movement Precision: 3mm, Clamp Rotation Turning: 0� , 45�, 90�, Clamp Rotation Turning Time: 1.5 sec, Clamp rotation Precision: 1�

Roll outer dimension: 560mm, minimum dia:50mm, maximum dia:150mm, Effective roll width: Inner roll:630mm,Outer roll:270mm, Maximum work length:Inner roll:870mm, outer roll:1340mm, distance between roll axis:560~568,Adjustment :8mm, phase adjustment:6degree, maximum steel block size:100degree, roll R.P.M:50, Air source pure dry air:4.5~6.5 kg, power supply:200V, control circuit motor:100V, one unit main power supply:30Kwx1000rpm 200V

DIA:3000mm,RING SIZE:2800,HEIGHT:580

20t custom powder molding press Pressure 9T?18T

60 tons

Filling depth: 100mm Number of moldings: 10-40 S / M

Filling depth: 100mm Number of moldings: 10-40 S / M

Capacity:40 Ton, 15-80 spm

Capacity: 20 ton,Molded number: 10 - 40 S/M,Motor: 3.7 kW