Pressure Capacity: 400 ton,Stroke Length: 400 mm,Max. Descending Speed: 220 mm/sec,Over Drop Distance: 11.5 mm,Stopping Time: 69.3 ms,Daylight: 900 mm

Hydraulic Press, cap:315T, S:400mm, Shut height:210mm,die length:610mm,slide:500x600, bolster:500x600,bed KO stroke:200mm,bed KO capacity:25ton

Make: NEAGARI,JAPAN Year Of Manufacture: 1992,Max Capacity:1000 T, Stroke:1100 mm, Daylight(Max Opening):1300 mm, Down Speed:200 mm/sec, Pressing Speed:16 mm/sec, Up Speed:140 mm/sec, Bolster Area:940 x 1000 mm(LR x FR),Bed Knock:Modified Hyd-Cylinder Type (100Ton x 150 St), Power Source　AC 220 V,3￠ (Main Pump 75Kw X2, K/O Pump 37Kwx1), Total Weight:About 46 Tons. Please note that the machine has been OVERHAULED. Mechanical & Hydraulic Parts: New Bolster(Included Pressure plate),Slide Machining(New Pressure Plate),Bed Machining, New Hyd-Packing,Hyd-Cylinder & Ram - renewing, Modified Bed Knock-Out- Hyd-cyl

Capacity: 1000 T, Stroke length: 800 mm, Bolster area: 1000 x 1000 mm, Slide area: 1000 x 1000 mm

hydraulic press, Capacity:800ton,length of Stroke:295mm, die height:680mm, bolster area:1100x690mm, Downstroke:187mm/S, Pressure speed:9mm/S, Motor:22KWx4P

Capacity: 2000ton, maximum stroke:900mmm, daylight:2300mm, area of table:1850x1850mm, Maximum pressure:210

TECH CAPACITY : 630T

Capacity : 630t, Stroke length : 140mm, Number of stroke : 20~40 spm, Die height : 470mm, Slide adjustment : 15mm, Bolster dimension (left to right x front to back) : 560 x 700mm, Slide dimension (left to right x front to back) : 430 x 600mm, Electric motor for slide adjustment : 1.5kw x 4P.

Capacity : 1000t, Stroke length : 500mm, Number of stroke : 15~20 spm, Bolster dimension (left and right x front and back) : 1000 x 1200mm, Slide dimension (left and right x front and back) : 1000 x 1200mm, Die height : 800mm, Slide adjustment : 30mm.

Capacity : 630t, Stroke length : 400mm, Number of stroke : 15~25 spm, Bolster dimension (left and right x front and back) : 800 x 1050mm, Slide dimension (left and right x front and back) : 800 x 1050mm, Die height : 800mm, Slide adjustment : 50mm, Main motor : 90kW, Maximum stop time : 243ms.

Capacity : 400t, Stroke length : 220mm.

Capacity : 800t, Number of strokes : 15~35spm, Stroke length : 300mm, Die height : 700mm, Slide adjustment amount : 50mm, Slide dimensions (left and right x front and back) : 1100 x 900mm, Bolster dimensions (left and right x front and back x thickness) : 1100 x 900 x 150mm, Maximum stop time : 260ms, Electric Motor : 0.4KW X 4P.

Capacity: 800t ST: 300 13 to 35 spm DH: 670 SL: 1500×1000 B: 1500×1100×300 slide knockout 10t Die cushion 60t

CAPACITY : 2500KN(250ton),SLIDE STROKE : 200mm/Max SPM : 25~40,DIE HEIGHT : 500mm,SLIDE ADJUSTMENT : 50mm,OVERUN SETTING POSITION : 315,MAX.DOWNTIME : 210ms,BOLSTER AREA : 1100*564,MAIN MOTOR : 30kw.

CAPACITY:250T,SPM:15-80,ROKE LENGTH:30eL,FRONT*BACK*THICKNESS:600*500*240

CAPACITY: 630T, STAGE: 2 POINT, STROKE: 250mm, SPM: 20-40,DIE HEIGHT: 710,SLIDE ADJUSTMENT: 50, BOLSTER SIZE: 1400*1000*120, SLIDE SIZE: 1000*900

Capacity: 1250T, SPM: 5.15 ~30, Stroke length: 350 mm, Die height: 700 mm, Slide adjustment: 50 mm, Bolster size: 1400 x 1200 x 220 mm, Slide size: 1400 x 1200 mm, Press Weight: 75 Ton, Other Accessiories Weight : 20 ton

Capacity : 6 t, Standard dropping section weight(upper mold not included) (kg) : 6200,Standard upper section weight(Nominal value) (kg) : 1800,Stroke（ｍｍ）: 1300, Cylinder diameter : 580 mm, Piston diameter : 210 mm, Impact energy : 22415 kg-m (≈219.8ｋJ), Distance clear between guides : 795 ｍm, Lower ram surface : 795 W x 1006L mm, Upper sow block surface : 880 W x 1200L mm, Inlet Pipe Size : 125A (5B), Exhaust Pipe Size : 200A (8B), Required Air Compressor Capacity ; >535 Kw, Maximum Air Pressure : 7 Kg/cm2.

t:1/8, 46omm, 11KW, 5500kg

CAPACITY : 40 ton COUNTERBLOW HAMMER, -Condition:Fully refurbished in 2014~2015 -Technical specification Distance between Upper and Lower Ram (max.) :2400MM,(without tool) Dimension of Lower Ram : 1700x2230x2100 MM, Dimension of Upper Ram : 2310x2150x3500 MM, Distance between slides (free opening) : 1280 MM, Dimension of the connecting pipeline (outside diameter and wall thickness) at the inlet : 324/8 MM, at the exhaust port : 324/8 MM, at the control inlet : 34,2/3,2 MM, Dimension of the machine Height above ground level : 6800 MM, Width : 2800x4840 mm, Depth : 3600 mm , Base plate :3600x5300 mm , Foundation pit : 13600x8700 mm , Lower Ram weight : 47,260 kg, Upper Ram weight : 45,170 kg,

2.5t Hammer

3T Hammer Standard Dropping Section Weight : 3200kg, Standard Upper Mold weight : 540kg, Inpact Energy : 10900kg, Minimum Safe mold thickness : 400mm, Max. Stroke : 1200mm, Right to Left Ram Guide : 690mm, Lower Ram Surface Size : W 690*L 710mm, Upper sawblock surface size : W 725*L 915mm, Inlet Pipe Size : 100 Exhaust Pipe Size : 150 Floor to Machine Top : 5751mm, Overall Height : 6781mm, Piston Rod Removal Height from Floor Length : 8100mm, Minimum Compressor Output : 150Kw, Maximum operating pressure : 7kg/cnf

Capacity: 5.5 Ton, Ram weight: 5500 kg, Maximum Stroke: 1250 mm, Diameter of air supply pipe: 7 inch / 175 mm, Diameter of Exhaust Pipe: 8 inch/ 200 mm, Maximum Pressure: 7 kg/sq.cm, Compressor Capacity: 600 HP, Anvil Weight: 100,000 Kg, Total Weight: 175,000 Kg

2 ton.

0.5 ton.

Inner Segment Outer Dia : 460mm, Inner Segment effective width : 570mm, External Mouth – Diameter : 460mm, Side roll effective width : 210mm, Interval adjustment : 6mm, Number of wheel rotations : 65 rpm, Double rotation power : 2800Kgm Material Dimensions : 75mm angle Air Pressure : 5~7kg/cm1 Machine Weight : 9.5T Manipulator Type : RAF-46 Type 4 pass all automatic manipulator Stroke Length : 600mm, Transverse pitch : 70~130mm,(can be set at 1mm pitch) Cycle Time : 60 Roll Body and mechanical movement Lateral devastation : AC Servo System Measure before chuck : 100mm, Siding : Collection pump method Chuck type : 2 clawed chucks Lateral Movement : 11KW Servo Material Supply : Hydraulic cylinder Product discharge chute : sloping down chute Air Pressure : 4.5~5.5kg Machine Weight : 5.5T