FANUC-18T with milling table φ910mm swing φ1000mm　 Maximum processing height H550mm 2APC BT50 ATC36 Table rotation Max600rpm (2-stage low speed specification) Milling spindle Max4500rpm

OSP-P200L BT50 ATC36 4-jaw single action chuck φ915 with cover with tools

[❖Video available❖] F15-TF 10-jaw hydraulic chuck (3200φ) Simultaneous 2 axes (XZ) Table diameter: 3200 Maximum diameter that can be cut: 4000 Maximum turning height: 1400 Maximum load mass: 15T Table rotation speed: 0.8-80min-1 Vertical movement amount: 1000mm Left and right movement amount: 1500mm Swivel angle 0° Size of mounting tool: 32*32mm ATC12

OSP-P200L, BT50, ATC36, 4-jaw single action, chuck dia : φ915, with cover, with tools.

Fanuc : 0T-B, Table dia : φ3000, Max turning : φ7000, Processing height : 2200, Workpiece weight : 15T, Tool vertical stroke : 1200, Main Motor: 45kw x 6p.

OSP-5020L 21 inch chuck # 06618

MAXIMUM SWING : 11,500mm, MAXIMUM TURNING OUTER DIAMETER-11,500mm, MINIMUM TURNING INNER DIAMETER: (Right head:650mm),(left head:650mm), MAXIMUM WORK HEIGHT- 5,500mm,MAXIMUM DISTANCE FROM THE TOP OF THE TABLE TO THE BOTOOM OF THE PITE HOLDER(at a holder lenght of 400mm),MAXIMUM LOAD WEIGHT ON THE TABLE- 200,000Kg

TECH CAPACITY : φ:1200

Fanuc-18iT, DRILLING & MILLING Table:Φ1250, ATC24,Max Machinig Dia.1600,Max Swing:1600,height1250, Max Loading work8000kg, Max drilling dia.80mm, max cutting force 30kN, Max tap dia.M48 x 5

TECH CAPACITY : φ:1200

Fanuc-6T, Turrest type, table Φ1250mm,Swing1600mm,Turing outside dia.1350, max.machining height1250,mazx.loading work5000kg: turret head traverse(UD)850, (RL)900/100

TECH CAPACITY : φ:1200

Table:Φ1200mm Swing:Φ1600mm

TECH CAPACITY : φ:1200

Side Head Type Table:Φ1200mm Swing:Φ1600mm, Turning height:930mm, X,Y,Zscale

TECH CAPACITY : φ:600

Fanuc-21T Chuck: 600 Maximum cutting diameter: 630 Maximum swing: 800 Maximum cutting height: 500 Maximum product load: 300kg Table maximum rotational force: 1470 The amount of movement: up and down about 750 * 500 Tool storage capacity: 6 Table rotational speed: 15-1000

1200×5000　 With digital (only 1 axis)　 with replacement gear

TECH CAPACITY : φ:1500

Fanuc 16T swing over bed:1600,swing over cross slide:1300,Distance between centers:4000,chuck size:1500,working weight:15t

MAZATROL 640MT PRO ATC80 BT-40 1st spindle 2800rpm 2nd spindle 3300rpm 12 inches (1st/2nd) 1st spindle 3 hollow jaws KITAGAWA B-21215X 2nd spindle 3 hollow jaws KITAGAWA B212 Mill shaft 12000rpm Stroke (XYZ) 630 ×230×1585 Maximum machining length 1524mm Maximum swing φ760 tool eye Mill unit replaced with new one

Mazatrol Matrix Nexus, Bed Length -300Uin,Capacity Maximum Swing:550mm /21.65in,Maximum Machining Diameter:280mm /11.020in,Maximum Bar Work Capacity:51mm /2.0in, Maximum Machining Length : 335mm /13.190in, Main Spindle Chuck Size : 6in, Maximum Speed : 6000rpm, Motor Output (30minute rating)11kw /15.0hp, Turret (Upper) Number of Tools:12, Maximum Speed: 4500rpm,

MAZATROL MATRIX, Specification Bed Length - 300U in, Capacity Maximum Swing 550 mm / 21.65 in, Maximum Machining Diameter 330 mm / 12.990 in, Maximum Bar Work Capacity 51 mm / 2.0 in , Maximum Machining Length 285 mm / 11.220 in , Main Spindle Chuck Size 8 in, Maximum Speed 5000 rpm , Motor Output (30 minute rating) 15 kw / 20.0 hp , Turret (Upper) Number of Tools 12 , Feed Axes Travel (X Axis) 190 mm / 7.48 in .

MSC-518 (Fanuc) Both center specifications 12-sided turret Right-out chip conveyor (spiral)

MSC-518 (Fanuc) Both center specifications 12-sided turret Right-out chip conveyor (spiral)

MSC-500 (Fanuc) Both center specifications 12-sided turret Right-out chip conveyor (spiral)

Maximum processing diameter : Φ20, Maximum processing length : 165mm, Maximum front hole diameter : Φ10, Spindle rotation speed : 8000min, With bar feeder.

CINCOMSYSTEM, FS32i-Model A, Maximum processing diameter : Φ20, Maximum processing length : 165mm, Maximum front hole diameter : Φ10, Spindle rotation speed : 8000min, Back spindle rotation speed : 8000min, Number of tools installed: 21, 6 pieces of gang turning tools, Comb blade rotary tool : 3 pieces, 4 tools for front hole drilling, 8 tools for back drilling, Alpstool ASR X-20ZC type (3M) with bar feeder With automatic fire extinguishing system With mist collector.

FANUC, MMaximum processing diameter : Φ20, Maximum processing length : 165mm, Maximum front hole diameter : Φ10, Spindle rotation speed : 8000min, rotary guide bush 6 external diameter bits can be installed　 2 cross rotary tools can be installed 4 main/sub common end face holes Comes with parts catcher　 Workpiece unloading conveyor with left-out chip conveyor (scraper)　 With 4 medium coolant pressure units and automatic fire extinguishing system　 Auto bar 3m specification (Alps/ASR X-202C).

Control system : CINCOM F-32iMB, Rated power : 7.1 kVA, Max machining dia : 20mm, Max machining length : 200(55)mm, Max drilling dia : 10mm, Max tapping dia : M8, Spindle speed (rpm) : 10,000max, Max chuck dia of back spindle : 20mm, No of tools to be mounted : 21,Bar feeder : ASRX-207CII-3M, Machine weight : 2,200kg.

Control system : CINCOM FS32i-modelA, Rated power : 6 kVA, Max machining dia : 20mm, Max machining length : 200(55)mm, Max drilling dia : 10mm, Max tapping dia : M8, Spindle speed (rpm) : 10,000max, Max chuck dia of back spindle : 20mm, No of tools to be mounted : 21,Bar feeder : ALPS Tool X-207C-3M, Machine weight : 2,550kg.

Control system : CINCOM FS32i-Model A, Rated power : 6 kVA, Max machining dia : 20mm, Max machining length : 200(55)mm, Max drilling dia : 10mm, Max tapping dia : M8, Spindle speed (rpm) : 10,000max, Max chuck dia of back spindle : 20mm, No of tools to be mounted : 21,Bar feeder : OS2A805-2.5M, Machine weight : 2,200kg.

Control system : CINCOM F32i-A, Rated power : 6 kVA, Max machining dia : 20mm, Max machining length : 100mm, Max drilling dia : 10mm, Max tapping dia : M8, Spindle speed (rpm) : 10,000max, Max chuck dia of back spindle : 20mm, No of tools to be mounted : 21,Bar feeder : OS20C-3m, Floor space : 2.3m*1.15m, Machine weight : 2,200kg.

CINCOM SYSTEM M6, Maximum processing: φ42*80mm , S: (1st axis) X135*Z200mm, (2nd axis) X44*Z397mm, Spindle through hole: φ47mm, 60-6000rpm, C-axis: 0.001°, Tools: 12, Milling: 4500rpm, With milling function (without holder), With Chip Controller (Right Out), With 3m bar feeder (Alps FX-45).

CINCOM SYSTEM M6, Maximum processing: φ42*80mm , S: (1st axis) X135*Z200mm, (2nd axis) X44*Z397mm, Spindle through hole: φ47mm, 60-6000rpm, C-axis: 0.001°, Tools: 12, Milling: 4500rpm, With milling function (without holder), With Chip Controller (Right Out), With 3m bar feeder (Alps FX-45).

TECH CAPACITY : DIA 210x14stations, gantry loader

FANUC, φ295,8 inch hydraulic chuck*2,Octagonal turret*2,Bit 20 φ40,45-4500rpm,7.5Kw, S: X130*Z-145,3-axis, CNC reversing gantry loader (workpiece 3Kg) Palletizer.

FANUC φ295,8 inch hydraulic chuck*2,Octagonal turret*2,Bit 20 φ40,45-4500rpm,7.5Kw, S: X130*Z-145,3-axis, CNC reversing Single gantry loader (workpiece 3Kg) Palletizer.

FANUC-16TT,φ295,Howa 6 inch hydraulic chuck*2,Octagonal turret*2,Bit 20 φ32,45-4500rpm,7.5Kw,S:,X130*Z145,3 Axis CNC Inverted Gantry Loader.

FANUC φ295,8 inch hydraulic chuck*2,Octagonal turret*2,Bit 20 φ40,45-4500rpm,7.5Kw, S: X130*Z-145,3-axis, CNC reversing gantry loader (workpiece 3Kg) Palletizer.

Turret front : dia 225, Maximum chuck size Standard : 210 mm (8"),Option : 254 mm (10"),Number of turret stations : 15 x 2, Maximum bar workpiece size : dia. 65 mm,Spindle drive motor : Standard: 15 kW / 30 min x 2,Option: 18.5 kW / 30 min x 2, Spindle speed range : 42 rpm - 4,200 rpm, Live tool drive motor : 3.0 kW x 2, Maximum tool shank size : 16 mm, Maximum processing : 5260, Maximum length : 170mm, Number of turret stations - X1,X2-axis(radius value) : 230mm, Z1axis : 250mm, Z2 axis : 810mm, Fast forward speed - X1,X2-axis : 20m/min, Z1axis : 24m/min, Z2 axis : 32m/min, Spindle speed (standard) : 4200 rpm, Boring bar maximum dia : 40, Rotary tool motor : 3.6KW, Rotary tool maximum rotation speed : 3600 rpm, Spindle indexing method : C-axis control (0.001 deg) : C-axis rapid traverse : 200 rpm, Maximum tool diameter milling : 16, Tap : M12, Cutting oil capacity : 200 liters, Gross weight with loader : 10,800 kg. LOADER SPECIFICATION - Stroke X-axis : 665mm,Z-axis : 2250mm, X-axis : 150mm, Maximum speed - Y axis : 100m/min, Z axis : 120m/min, X axis : 35m/min,Shaft : 90"<270>, Loader chuck specification (pneumatic chuck) -Jaw stroke dia : 33, Outer dia grip : 180kgf, Inner dia grip : 180 kgf.

FANUC F18i-TB,Chuck size - STD : 205 mm (8"),OPT: 254 mm (10"),Work size - Loader specification machine : 200mm, Without loader : 350mm, Loader specification : 120mm, Without loader : 170mm, 1st Station : 10, X-axis (radius value) : 190mm, Z-axis : 170mm, Fast forward speed X-axis : 24m/min,Fast forward speed Z-axis : 24m/min, Spindle speed - Strandard : 35~3000 rpm,option : 24~2400 rpm, Standard tool : 25mm, Maximum ring dia : 40mm, Weight (with loader and tools) : About 7000kg, Required floor space(this machine only) : Width 2360mm * Depth 2130mm, Width 2410mm * Depth 2130mm, Tooling : Turret, Number of tools - STD : 10 x 2,OP : 12 x 2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm - 3500 rpm, Spindle AC motor : 15 kW / 30 min x 2,22 kW / 30 min x 2, Number of gantry loader : 1, Gross weight with loader : 7200 kg.

FANUC F18i-TB,Chuck size - STD : 205 mm (8"),OPT: 254 mm (10"),Work size - Loader specification machine : 200mm, Without loader : 350mm, Loader specification : 120mm, Without loader : 170mm, 1st Station : 10, X-axis (radius value) : 190mm, Z-axis : 170mm, Fast forward speed X-axis : 24m/min,Fast forward speed Z-axis : 24m/min, Spindle speed - Strandard : 35~3000 rpm,option : 24~2400 rpm, Standard tool : 25mm, Maximum ring dia : 40mm, Weight (with loader and tools) : About 7000kg, Required floor space(this machine only) : Width 2360mm * Depth 2130mm, Width 2410mm * Depth 2130mm, Tooling : Turret, Number of tools - STD : 10 x 2,OP : 12 x 2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm - 3500 rpm, Spindle AC motor : 15 kW / 30 min x 2,22 kW / 30 min x 2, Number of gantry loader : 1, Gross weight with loader : 7200 kg.

FANUC F18i-TB,Chuck size - STD : 205 mm (8"),OPT: 254 mm (10"),Work size - Loader specification machine : 200mm, Without loader : 350mm, Loader specification : 120mm, Without loader : 170mm, 1st Station : 10, X-axis (radius value) : 190mm, Z-axis : 170mm, Fast forward speed X-axis : 24m/min,Fast forward speed Z-axis : 24m/min, Spindle speed - Strandard : 35~3000 rpm,option : 24~2400 rpm, Standard tool : 25mm, Maximum ring dia : 40mm, Weight (with loader and tools) : About 7000kg, Required floor space(this machine only) : Width 2360mm * Depth 2130mm, Width 2410mm * Depth 2130mm, Tooling : Turret, Number of tools - STD : 10 x 2,OP : 12 x 2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm - 3500 rpm, Spindle AC motor : 15 kW / 30 min x 2,22 kW / 30 min x 2, Number of gantry loader : 1, Gross weight with loader : 7200 kg.

FANUC F18i-TB,Chuck size - STD : 210 mm (8"),OPT: 254 mm (10"), Tooling : Turret, Number of tools - STD : 10 x 2,OP : 12 x 2, Spindle nose : JIS A2-6, Max. Spindle speed : 2400 - 3500, L・R V10 SP1・SP2, rpm : 4800rpm,Spindle AC motor : 15 kW / 30 min x 2,22 kW / 30 min x 2, Number of gantry loader : 1, Maximum processing diameter : φ350mm, 8inch 3-jaw solid (Kitagawa HOH-208),Maximum processing length : 120mm, Stroke : 190×170mm, No gantry loader stocker,Gross weight with loader : 7200 kg.

○ Features 　Left and right completely separated type, hard turning specification 　Left spindle 10 inch / Right spindle 8 inch chuck 　With gantry robot and post-exit chip conveyor 　20 station work stocker on the right (WF20L-160II) 　Measuring device on the left ○NC equipment 　FANUC31iA ○Maximum processing diameter 　φ240mm ○Distance between both spindles 　440mm ○Turret 　octagonal on both sides 　Axis stroke: X-axis (radius value) 130mm Z-axis 145mm 　Rapid traverse speed: X-axis 24m/min Z-axis 24m/min ○Spindle end shape 　JIS A2-5 ○Spindle through hole diameter 　φ47mm ○Inner diameter of front bearing 　φ80mm ○Spindle speed 　45-4500rpm ○Spindle motor 　AC7.5kw (30 minutes) x 2 ○ Machine size 　Width 4400 x Depth 2600 (including chip conveyor) x Height 2700mm (including loader) machine dimensions : Width 4400 x depth 2600 (including chip conveyor) x height 2700mm

Fanuc-16-T, Maximum swing φ295, octagonal turret, 8 inch chuck,Turret : 8 tools, Traverse X:130 Z:145, Spindle Speed : 45-4,500 RPM ,500rpm, Gantry loader specifications.

Chuck size : 165 mm (6"),Maximum processing dia : 168mm, Maximum length : 80mm,X - axis : 130mm,Z - axis : 110mm, fast forward speed : X axix -24m/min , Z axis - 24m/min, Spindle speed standard : 45-4500rpm,Standard tool : 20mm,Boring bar max : 40mm,Distance between spindles : 340mm,Maximum swing : 230mm,Tooling : Turret x 2,Spindle nose : JIS A2-5,Max. Spindle speed : 3000 rpm, 4500 rpm, 6000 rpm,Spindle AC motor : 5.5 kW / 30 min x 2,Number of gantry loader : 1,Gross weight with loader : 3500 kg, Required floor space (this machine only) : width 15550mm* Depth 1650mm.

Fanuc-18iTB 10 inch hydraulic chuck (left and right) Dodecagonal turret (left and right) With milling function Gantry loader Work stocker (right)

Freeze Pressure : 200,Frequency : 50H2,Rated capacity : 26.7KVA,Freeze current : 76.9A,Main motor rated power : 40A.

TECH CAPACITY : ?:210x14stations, Gantry loader 6 inch chuck (both left and right NICCO HF3-6A) # 19KX326290001

Chuck size:STD: 210 mm (8") OPT: 254 mm (10"), Number of tools: STD : 10 x 2 OP : 12 x 2,Spindle nose : JIS A2-6, Max. Spindle speed : 2400 rpm, 3500 rpm, Spindle AC motor : 15 kW / 30 min x 2 22 kW / 30 min x 2 , Number of gantry loader : 1, Gross weight with loader : 7200 kg

Fanuc 6inch 7.5kwx2 4 comb turrets, twin loader, manual available With electrical drawing

FANUC FS30i V8 (left and right) 4500rpm (left and right) Maximum processing diameter x length φ120 x 75 Stroke 130×145 Kitagawa air chuck (left and right/4 inches) 　Left: Special claw (wide type) Right: Special claw (wide demon claw type) Chipcon Left Exit Bucket Attached Left Exit Chute Gantry loader (with reversing machine) Rotary stocker 10ST Cutting Edge R Correction Chamfering/Corner R

TECH CAPACITY : Chuck: 210x8 stations ,Turret: 8 * 2 Spindle rotation: 45-4500rpm, Twin loader type,

TECH CAPACITY : ?:210x14stations Control: FANUC16TB Between both spindles: 340mm Chuck: 6 inches * 2 Turret: 8 * 2 Spindle rotation: 45-4500rpm

TECH CAPACITY : ?:210x14stations, Gantry loader 6 inch chuck (both left and right NICCO HF3-6A) # 19KX326290001

TECH CAPACITY : ?:210x14stations, # 18KX214480001 Made in October 2018

TECH CAPACITY : Φ:210x14stations

2003.1 FANUC-18iTB parallel 2 spindle (RIKEN / AD40E) 2 turret (8 � 2) with gantry right-handed chip conveyor carry-out conveyor 【in adjustment】

TECH CAPACITY : Φ:210x14stations

Fanuc-31iA, Max processing size:Φ120-75,Stroke(XZ)130*145, max spindle: 4500rpm, chuck 8inch, guntry-loader, stocker, chip conveyor

Weight : 3300kg,

Swing on bed 1260 , Swing on feed table 1020 , Center distance 6000.

End face composite processing Fanuc-16iTB (2003 retrofit, remodeled) Swing on the bed φ1220 * Between hearts 6000 V8 turret End face milling BT40 ATC12 Fixed motion vibration

Meldas (NC Retrofit 1991), chuck : φ1250mm, Bed top swing : φ1320mm, Swing on carriage : 1000mm, Width x height : 1000 x 600mm, Main motor : 30kw, center distance : 10m, Between Centers : 10,000mm, 2-saddle specification (V8 + presser foot type), Steady rest x 2 Roll holder x 1.

TECH CAPACITY : φ2000*12000

Fanuc-9TA,Table size:φ2000,Swing over cross table:φ2000, Distance between the center:12000,Work area(diameter*length):φ2000*12000L,S(XZ):715*15000,Max loading amount:50ton

M-SMART, Maximum swing : Φ720mm, Maximum processing diameter: 420mm, Stroke(X x Z) : 265 x 1350mm, Rotation speed : 4000rpm, Max bar work capacity : dia 80mm, Turret V12 (Chuck/10 inch), Mill axis motor Output : 7.5KW, Milling unit spindle : 4000rpm, Machine weight : 6900kg.

OSP-P200L, V12, 3000rpm, Maximum processing diameter*length: φ200*225, 8 inches 3 claws (hollow) S:155 (20+135) *245, Mill rotation speed 6000rpm, Chip controller right side, mist collector

M5 center spacing 3m, MAZATROL 640T, Machine weight T : 7700

NC equipment, OSP-P200L , Spindle : 10 inch 3 prong Kitagawa B-210 Hollow, Spindle speed : 75～3000rpm, Swing on bed : φ450 mm, Swing on traversing table : φ300 mm, Maximum processing (diameter x length) : φ280 x 290mm, Turret/Stroke Square slide sliding surface XZ axis stroke : 160x330mm, Turret V8, Square tool shank : 25mm, Boring bar : φ40mm, Machine dimensions : Width 2600mm x Depth 1600mm x Height 1600mm, Machine weight T : 2800kg.

NC equipment,OSP-P200L , Spindle : 8 inch 3 claw Kitagawa B-208 Hollow, Spindle speed : 75～3000rpm, C-axis 360 degrees Minimum 0.001 degrees, Swing on bed : φ450 mm, Swing on traversing table : φ300 mm, Maximum processing diameter x length : φ200 x 225mm, Square slide sliding surface XZ axis stroke : 160x245mm, Square tool shank : 20mm, Boring bar : φ32mm, Rotary tool : 6,000rpm, Machine dimensions : Width 2600mm x Depth 1600mm x Height 1600mm, Machine weight T : 2800kg.

Fanuc0i-TD, Spindle speed : 2500 rpm.

Chuck size : 110 mm (4") 135mm (5"),Number of tools : 10, Spindle nose : Flat nose,Max. Spindle speed : 80000 rpm,100000 rpm,Spindle AC motor : 3.7 kW / 30 min,Gross weight with loader : 2500 kg.

Maximum chuck : Φ16,Number of spindles : 6,Maximum material feed length : 80mm,Movement by cam : 30mm,Screw adjustment amount : ±10mm,lever : 1.15:1~0.5:1,Distance from perishable center to top of slide : 36.513mm,Amount of movement :80mm,lever ratio : 1:1~0.5:1,Distance from spindle center to top surface of slide : 26.210mm,RPM range : 400~5000rpm,Cycle time range : 1.6-27 sec,main motor : 7.5kw 6p,pump : 5w*2,oil pump : 0.75kw,Mouth*Depth*Height : 2245*1030*2030mm.

Pro-5, Table size : 750×400mm, Stroke : X600Y400Z350mm, Spindle : HSK-E32, Spindle speed : 40000rpm.

Professional5,ATC25,HSK-A63, Table size : 750*400mm, Spindle speed : 200~20000RPM, Stroke(XYZ) : 600*400*350mm.

Professional5 , Fanuc-180is MB5 SuperGI4 control Minimum command unit 0.0001mm , Table size : 750 x 400mm, T groove: 18H8 x 4 Maximum load: 300kg. Spindle - Holder Shank HSK-E32, High speed spindle : 40,000rpm, ATC storage number 40, Main bearing inner diameter : φ40mm, Travel amount for each axis : X-axis 600mm (spindle head left and right) x Y-axis 400mm (front and back of table) x Z-axis 350mm (spindle head vertical) , from spindle end to table top : 150 to 500 mm, Rapid feed rate XYZ : 20000mm/min, Cutting feed XYZ : 1～20000mm/min, Cutting tank : 130L, Total power capacity : 33kva, Air pressure source : 0.5～0.8MPa 600NL/min, Machine dimensions : Width 2280mm x Depth 2040mm x Height 2400mm, Machine weight T : 7300kg.

Fanuc180is-MB, 20 ATC, Table size : 900 x 410mm, Spindle speed : 12,000rpm, Stroke(XYZ) : 600 x 410 x 460mm, Maximum load : 500kg, Energizing time 95634h, Cutting time 18058h.

Fanuc-18iMB,BT40, 16 ATCs 50Hz, Table size : 630 x 400mm, Spindle speed : 20000rpm, Stroke(XYZ): 560 x 410 x 410mm,

Fanuc,16 ATCs, BT40 , Table size : 400 x 700mm, Spindle speed : 15,000rpm, Stroke (XYZ) : 560 x 410 x 410mm, Maximum load : 350kg.

professional 3, BT40, ATC 25, Table size : 750 x 400mm, Spindle speed : 20,000 rpm, Stroke (XYZ) : 600 x 400 x 350mm, Maximum load : 300kg.

Professional-3,25 BT40 ATC, Table size : 1000 x 500mm, Spindle speed : 20000rpm, Stroke (XYZ):900 x 500 x 450mm, Maximum load : 700kg.

Professional-3,Spindle BT40, Table size : 1000 x 500mm, Spindle speed : 20000rpm, Stroke (XYZ) : 900 x 500 x 450mm, Maximum loading capacity : 700kg.

Professional-3, Spindle BT40, Table size : 1000 x 500mm, Spindle speed : 20000rpm, Stroke (XYZ) : 900 x 500 x 450mm, Maximum loading capacity : 700kg.

Professional-3,BT50,ATC40, Table size : 1400 x 600mm, Spindle speed : 8000rpm, Stroke (XYZ): 1050*600*560mm.

Professional-3,BT50, TABLE SIZE : 1400 x 600mm, Spindle speed : 8000rpm, Stroke : X1050 x Y600 x Z560, Machine weight : 8000kg.

Control FANUC 20i-FB, BT-50 (24 pieces), Table work surface : 1600mmx500mm, Table movement : X1050mmY500mmZ550mm, Spindle speed 40～4000min⁻1.

Professional-3,BT50,ATC30, T ABLE SIZE : 1800 x 800mm, Spindle speed : 4000rpm, Stroke : X1250 x Y800 x Z700, Machine weight : 12000kg.

MAZATROL 640M ATC30 BT40, table size : 1200 x 550mm, Spindle speed : 12,000rpm, stroke 1020 x 510 x 460.

MSX-853Ⅳ ATC 30 BT40, Table size : 1100 x 600mm, Spindle speed : 12000rpm, stroke : 600 x 530 x 510mm, Mass of machine : 6350kg.

Professional3 ATC80 BT40, Table size : 900 x 420mm, Spindle speed : 20000rpm, Stroke : 900 x 500 x 450mm, Size of pallet : 900 x 420mm, Maximum loading masson the table : 700kg, Motor capacity : 0.75kw.

MAZATOROL 640M, ATC30 BT40, Table size : 2300 x 510mm, Spindle speed : 10000rpm, stroke : 1950 x 510 x 510mm.

FANUC-18i-M, BT50 24 ATC, Table size : 1400 x 600mm, Spindle speed : 12000rpm, Stroke: X1000 Y600 Z550mm.

FANUC180is-MB, BT40, ATC20, Table size : 1550 x 740mm, Spindle speed : 8000rpm, Stroke : X1530 Y740 Z660mm.

Neomatic 635V,BT50, ATC40, Table size : 1,500 x 740mm, Stroke : X: 1530 Y: 740 Z: 660mm, Spindle speed : 8,000rpm.

Professional5, HSK-A100 ATC60, Table size : 1400 x 700mm, Spindle speed : 18000rpm, Stroke : X1200 Y700 Z650mm.

FANUC160iS-MB ATC40 BT50, Table size : 2500 x 1260mm, Spindle speed : 4500rpm, Stroke(XYZ) : 2140 x 1260 x 900mm.

FANUC160is-MB,BT50,40 ATC, Table size : 2500 x 1260mm, Spindle speed : 6000rpm, Stroke : X2140 Y1260 Z900mm.

Professional6 (FANUC-31i),HSK-A63,Table size : 1800 x 1000mm, Stroke : (X)1500 x (Y)1000 x (Z)800mm, Spindle speed : 50～20000rpm, Table top height : 900mm.

Professional5, HSK-A100 ATC 40, Table size : 1800 x 1000mm, Spindle speed : 12000rpm, Stroke : X1500 Y1000 Z800mm.

F-31iB, Table size : 1050 x 560mm, Stroke (XYZ) : 1050 x 530 x 510mm, Spindle speed : 8000rpm.

NC unit: Pro-5, touch panel,Table size : 1650 x 700mm, Spindle speed : 20000rpm.

NC: Pro3 (F-18iMB), Table size : 1400 x 700mm,BT50.

NC unit: Professional-5, Table size : 750 x 450mm, Storke (XYZ): 650 x 450 x 350mm, HSK-F63, Spindle speed : 30000rpm, cutting time: 2055h.

NC unit: OSP-200MA, BT40, Table size : 1000 x 460mm, Spindle speed : 12000rpm.

NC: F-0iMD, BT50, ATC30, Table size : 650 x 1300mm, tool length, chip conveyor.

Fanuc-180is-MB, BT50,30 ATC, Table size : 1550 x 740mm, Spindle speed : 8000rpm, Table load capacity: 1500kg, Stroke(XYZ): 1530 x 740 x 660mm, Distance from table top surface to spindle end face: 150 to 810mm.

NC: F-31iB, HSK63, ATC: 30, Table size : 410 x 900mm, Stroke : X600 x Y410 x Z460mm, spindle speed: 20000rpm.

NC: Neomatic635V, BT40 ATC-30, Table size : 900x410mm, Stroke : X600 Y410 Z460mm, Spindle speed : 12000(OP：20000)min-1.

Professional-3, ATC15, Table size :1050 x 550mm, S(XYZ):900 x 550 x 450mm, Tool length (bloom) : BT40, Spindle speed : 20000rpm.

BT#40, ATC-20, Power supply: FANUC-0i-MC, Table: 3100 x 350mm, Stroke : X 3050 x Y 330 x Z 300mm, Spindle speed : 6000rpm.

FANUC-18i-M,BT40,36 ATCs, Table size : 3100 x 450mm, Spindle speed : 4000rpm, Stroke: X3000 Y400 Z340.

FANUC0i-MC, BT40, 45 ATC, Table size : 4100 x 450mm, Spindle speed : 6000rpm, Stroke : X4000 x Y400 x Z310.

NC unit MAKINO-Professional3, Table work area: 750×400mm, (T groove 18H8×4), Maximum loading mass: 300 kg, Spindle Holder shank: HSK-A63, Maximum spindle rotation speed: 20,000rpm, ATC storage number :15, Movement amount of each axis X-axis (spindle head left and right) : 600mm, x Y-axis (front and back of table) : 400mm, x Z-axis (spindle head top and bottom) : 350mm,From spindle end face to table top surface: 150 to 500mm, Feeding speed Rapid traverse speed: XYZ axes 20000mm /min,Cutting feed: XYZ axis 1 to 20000mm/min, Tank Cutting tank 130L, Required power source Total power capacity: 33KVA, Air pressure source: 0.5 to 0.8MPa 600NL/min, Size of machine Dimensions: Width 2280 x Depth 2040 × Height 2400mm, Weight: 7300Kg.

NC unit MAKINO-Professional3, Table work area: 750×400mm, (T groove 18H8×4), Maximum loading mass: 300 kg, Spindle Holder shank: HSK-A63, Maximum spindle rotation speed: 20,000rpm, ATC storage number 15, Movement amount of each axis X-axis (spindle head left and right) : 600mm, x Y-axis (front and back of table) : 400mm, x Z-axis (spindle head top and bottom) : 350mm, From spindle end face to table top surface: 150 to 500mm, Feeding speed Rapid traverse speed: XYZ axes 20000mm /min,Cutting feed: XYZ axis 1 to 20000mm/min, Tank Cutting tank : 130L, Required power source Total power capacity: 33KVA, Air pressure source: 0.5 to 0.8MPa 600NL/min, Size of machine Dimensions: Width 2280 x Depth 2040 × Height 2400mm, Weight: 7300Kg.

Professional5 HSK-F63 ATC 15 pieces, Table size : 750×400, Spindle speed : 30000rpm, Stroke : X600 Y400 Z350.

Professional5 HSK-A63 ATC 15 pieces, Table size : 750×400, Spindle speed : 20000rpm, Stroke : X600 Y400 Z350, Super GI.4.

Professional3 HSK-F63 ATC 25 pieces, Table size : 750×400, Spindle speed : 30000rpm, Stroke : X600 Y400 Z350, Super GI.3

Professional 3, BT 40, 20,000rpm, ATC:15.

Professional-3 HSK-A63, S : 600*400*350, T:750*400, Spindle speed : 30,000rpm, 60 ATC AWC12 Pallet Chip conveyor.

KNC&FANUC Comb blade 8000rpm, Stroke : 500×250, 2-finger 6-inch chip controller post-exit Mist collector stocker 12 stations High pressure coolant.

Professional A DTC 20 pieces (magazine plate φ4), Table : 750×400, 32000rpm, Stroke : 600×400×400mm, Spindle run :300mm, Right angle : 300*300mm, Swing dia : 300mm, X axis movement : 600mm, Y axis movement : 400mm, Z axis movement : 400mm, Distance b/w spindle surface and table top surface : 50~450mm, Distance b/w spindle center and front surface of column : 180~580mm, Table size :750*400mm, Spindle cutter dia : 23mm 6automatic, Clamping with built in straight collect : 3,4,8 each size can be replaced manually,Spindle speed : 3000~32000 min,Motor maximum output : 1.9kW,Motor maximum torque : 0.73Nm, Mechanical quality : 4100kg, Air pressure : 0.5Mpa 300L/min.

Professional5 ATC40 HSK-F63,table : 700×400, rpm : 30000rpm, stroke : 600×400×350 2APC, Spindle run out : 200mm, Swing dia : 300mm, Squareness geometric accuracy of motion : X-Z (300*300mm),Y-Z (300*300mm),X-Y (300*300mm),1)RANGE OF MOTION, Column left-right direction (X aixs) : 600mm, Table longitudinal direction (Y axix) : 400mm, Spindle vertical direction (Z axis) : 350mm, Between spindle surface and table top surface : 150~500mm, 2) SPINDLE, Spindle front bearing inner dia : 65mm, Spindle speed conversion steps : S5 digit direct finger, Tool clamp force : 8.8kN, HIGH SPEED SPINDLE - Spindle speed : 300~30,000min L, Drive motor : 15/11 kW (30 min/continuous), HIGH TORQUE SPINDLE - Spindle speed : 50~10,000min L, Drive motor : 7.5/5.5kW(25%ED/continuous),AUTOMATIC TOOL CHANGER(ATC) - Tool remote mode : Address fixed control system,Tool shank type : HSK-F63, Tool change time (tool to tool) : 7s,Maximum tool dimension (dia * length) : 80 * 250mm, Maximum tool mass (including shank) : 7 kg.

Professional5 ATC15 HSK-A63,Table : 750×400, RPM : 20000 rpm,Stroke : 600×400×350, Spindle run - out run-out of test bar : 200mm, Swing dia : 150mm, Right angle : 300 *300mm, Mist collector.

ATC25 / HSK-A63,Rotary table Size: Φ1000*500*2APC,Travel (X*Y*Z): 900*500*450mm,Table to the end face of the spindel : 550,Spindle speed: 20,000 RPM,Maximum payload on the table : 700kg,Height of table top from floor : 980mm,Spindle motor : 22/18.5 KW,Spindle start up characteristics : 2.3 sec(14000 min),Fast forward speed : 50000 mm/min,Cutting feel rate :1~50000mm,Maximum tool length : 300mm, Tool mass : 8kg,Size of pallet : 900*420 mm,Pallet exchange method : Shuttle,Machine height : 2995mm,Required floor size : 2400 * 3140mm,Scale feedback function,With spindle Through Function,Tool Length Auto Measuring Device,MACHINE WEIGHT : 8500kg.

ATC15 / BT40,Rotary table Size: Φ750*400*300kg,Travel (X*Y*Z): 600*400*350mm,Table to the end face of the spindel : 500,Spindle speed: 20,000 RPM,Maximum work size : 750*45*250mm,Height : 2,400mm,With Gl Control,With Through Spindle Air,With Tool Length Auto Measuring Device,MACHINE WEIGHT : 7300kg.

Professional3 BT50 ATC 20 pcs Table size 1400

FANUC-16iMB, T: 355

OSP-E100M, ATC: 30, T: 400 * 400, S: 560 * 610 * 560, rpm:50-7,000, 2 pallets

Fanuc16i-MB BT50 ATC20 T:1350x560 Spindle6000rpm S(xyz):1050x560x520

BBT 40 30 ATCs T: 1300 * 550 Main shaft rotation speed 12000 rpm S: 1050 * 510 * 510 With touch sensor

Fanuc-180iS-M T:1050x560, S(xyz):820x510x510,ATC-30 Spindle6000rpm, with 9 tools

NC device: MSX-501Ⅲ, Travel amount : X-axis : 900mm x Y-axis : 800mm x Z-axis : 980mm, Table work surface : 630mm x 630mm, Spindle maximum rotation speed : 10,000min-1, Taper No.50.

professional-5 (super GL,4 control), T: 630 square 0.0001 division, S:900*800*1020 (Moiré scale), 50～20000rpm, Spindle: HSK-A100, ATC: 186, Retractable tool length automatic measuring device (contact type) Marposs touch sensor Through spindle (3.0MPa) 2APCs

professional-5 (super GL,4 control), T: 630 square 0.0001 division, S:900*800*1020 (Moiré scale), 50～20000rpm, Spindle: HSK-A100, ATC: 186, Retractable tool length automatic measuring device (contact type) Marposs touch sensor Through spindle (3.0MPa) 2APCs

Mazatrol-640M,Spindle BT40, Table size : 500 x 500mm, Spindle speed : 15000rpm.

Spindle BT40, Table size : 400mm, Spindle speed : 12000rpm.

Professional3, Table size : 800 x 800mm, Spindle speed : 10000 rpm, Stroke : X800 Y750 Z770mm, Spindle motor power : 30 kW.

NC: Professional-3,HSK-A100, ATC-60, Table size : 2200 x 1000mm, Stroke : X-axis: 2000 x Y-axis: 1350 x Z-axis: 1000 mm.

Control: Pro5,Table size : 2200 x 1000mm, Stroke : X2000 x Y1350 x Z1000mm, Maximum processing volume : 2000 x 1000 x 1350mm, Maximum loading mass : 10T, Main rotation: 15,000rpm.

NC: Pro-3, HSK-A63, 2APC, ATC-60, Table size : 550 x 550mm, Spindle Speed : 20000 RPM, 400 square.

BT50, ATC120, 6APC B axis 1 degree Chipcon Tool length, Table size : 800 x 800mm, Maximum Speed : 8000rpm, Main motor : max 219 kw, Weight : 38050kg.

Table size: 1500✕1200mm, Table maximum load: 10000kg, Minimum indexing angle: 0.0001°, Stroke of each axis: X1500 (table left and right), Y1300 (head up and down), Z1300 (spindle front and back), Spindle speed: 20-15000rpm.

Table size : 1250*1600mm, Spindle speed : 15000rpm, Stroke of each axis: X2100 (table left and right), Y1560 (head up and down), Z1580 (spindle front and back), Table maximum load : 5000kg.

Pallet Size : 400 mm x 400 mm, X - Axis Travel : 560mm, Y - Axis Travel : 610mm, Z - Axis Travel : 560mm, Spindle Speed : 12000 rpm, Table indexing angle: 1/1,000°.

NC:Pro5 HSK-A63, Maximum spindle speed : 20000min-1, ATC60, Travel: (X) 560 mm (Y) 560 mm (Z) 600 mm, Pallet Size: 400 x 400 x 2APC, Max.Work Piece Mass: 400 KG, Spindle rotation speed: 20000 rpm, Feedrate Rapid: 60000 mm/min, Cutting Feeding Speed: 1 - 45000 mm/min, Arbitrary indexing 2APC Center through specification Chip conveyor (later output) Touch sensor Tool length measurement.

Control device Professional 5, Spindle HSK-A100, 10,000rpm, 1 degree indexing table, 60 ATC, pallet size 500mm, Travel: (X) 730 mm (Y) 730 mm (Z) 800 mm,From pallet center : 50~850mm, Pallet Size: 500mm, 2 pallets, Moire scale feedback XYZ0,1μm, Through-spindle coolant (7,0MPa) and air, Cutting fluid temperature controller, left chip conveyor, automatic grease supply device.

Pro.5 Spindle : BBT40 high output, 14000 rpm, (BIG･PLUS) Built-in hale function, ATC-60, 400×2 PCs, Travel: (X) 560 mm (Y) 560 mm (Z) 600 mm, Pallet Size: 400 x 400 x 2APC, Max.Work Piece Mass: 400 KG, Spindle rotation speed: 20000 rpm, Feedrate Rapid: 60000 mm/min, Cutting Feeding Speed: 1 - 45000 mm/min, Spindle Coolant: Through Spindle Coolant.

Professional-3, Table size : 3000×1500mm, S(X/Y/Z): 2500×1600×1300mm, 15000rpm, Distance b/w table top surface and spindle center line 100~1700mm, Distance b/w table edge and spindle edge : -200~1100mm, Origin of each axis : X- axis center of stroke, Y-axis Positive end of stroke, Z-axis Positive end of stroke, Table format : Blend table type, Table top height : 1280 mm from the floor, Maximum workpiece shape (length *width * height) : 2500 * 1700 * 1900mm, Maximum loading weight on the table : 15000 kg, Tool storage capacity : 5,Tool dia : 125mm, Maximum tool length : 450mm, Maximum tool mass : 8 kg,Tool maximum allowable moment : 9.8 N-M (1kgf-m), Tool selection method : random selection (fixed address method), ATC: 60, AAC: 25° angular 300mm, Extension Super GI Chipcon.

Professional 3 (F-16M),HSK-A63RPM : 20,000rpm,T:630*630, 2-pallet swivel,B: 1° indexing, XYZ:800*750*770,Spindle through coolant.

Pro3 control, s: 560 * 560 * 600, spindle 14,000 rpm, BBT40, ATC 60, 2 pallets 400 square, rear tip conveyor, NC rotary table (0.001 degree indexing, simultaneous 4-axis control)

Mazatorol-640M, BT50, ATC 120,T: 1250 * 1600, 2 Palais, Spindle speed 15000 rpm, S: X2100 * Y1560 * Z1580 ,Arbitrary index, Chip conveyor Table maximum loading mass 5000kg Center through (7MPa)

Travel (X axis): 1500 mm, Travel (Y axis): 1300 mm, Travel (Z axis): 1000 mm, Travel (B axis): 0.0001, Spindle : HSK-A100 , Spindle Speed: 20-15,000 rpm, ATC: 30 pcs, Table: 1500*1200. Spindle through Single-sided cool Chipcon Scale: XYZB Super Gl

NEW MACHINE!! Professional-5 BT50 P:630x630(2APC)S(XYZ)900x800x1020(scale feed back) Spindle through coolant

Professional 5 BT50 ATC40 P:630x630 S(XYZ)900x800x1020 chip conveyor, center through

Professional-3 BT 50 ATC 120 books T: 1300 2 Palais Main shaft rotation speed 50 - 15000 rpm S: X 1800 * Y 1600 * Z 1300 Arbitrary indexing

FANUC16i-M BT40 ATC 40 pieces, Table : φ1250, 1 pallet Spindle speed : 20000rpm, Stroke : X1850 Y1300 Z700, Arbitrary index Machine weight 22t.

ATC16 / BT40,Rotary table Size: Φ630*500*200kg,Travel (X*Y*Z): 500*450*400mm,Spindle speed: Max.8,000minRPM,LINEAR SCALE,WITH CHIP CONVERYOR,WITH SPINDLE COOLING UNIT,NO OF SIMULTANEOUS CONTROL AXES : 5 AXIX,MACHINE WEIGHT : 6800kg.

ATC16 / BT40,Rotary table Size: Φ630*500*200kg,Travel (X*Y*Z): 500*450*400mm,Spindle speed: Max.8,000 RPM,LINEAR SCALE,WITH CHIP CONVEYOR,WITH SPINDLE COOLING UNIT,NO OF SIMULTANEOUS CONTROL AXES : 5 AXIX,MACHINE WEIGHT : 6800kg.

NC: Siemens 840Dsl Operate (CELOS specification), 21.5 type (ERGEline) multi-touch monitor, table: Φ650×500, S(XYZ): 650mm×520mm×475mm, HSK-63, ATC60, Spindle speed: 20000rpm, B-axis swivel range -35° to 110°, C-axis swivel range 360°, coolant tank, scale feedback (XYZ), through spindle, Tool length, touch sensor, chip conveyor,

Professional 5 (FS310i) simultaneous 5-axis rotary table specification　 ATC25 HSK-A63 20000rpm super GI.4 control Helical interpolation (circular interpolation + 2-axis linear interpolation) 5-axis machining function package Arbitrary angle chamfering, corner R Stroke (XYZBC) 600×325×350 　B = 130° (-20° to +110°) C = 360° C table φ200 (Minimum indexing angle 0.0001°) Non-contact tool measuring device (table top measuring type) Spindle through coolant (1.5MPa) Mist collector Air dryer Cutting fluid temperature controller (chiller, circulation pump) Kuroda MQL device Oil skimmer

[Low operating machine] Controller: S840Dsl (SIEMENS) Spindle HSK-A63 20000min ATC-30 Stroke: X650 Y520 Z475 table630×500 Tilt angle -35/+110

Celos with Siemens T: ?630 * 500 S (XYZ): 650 * 520 * 475 Spindle speed 20,000rpm, HSK-A63 Spindle coolant In-flight tool measuring device (Heidenhain) TT160, chip controller (scraper)

Control device: iTNC530 S935 * 850 * 650mm T ?850 * 750 Maximum work diameter ?1040mm Maximum work height 590mm HSK-A63 Maximum rotation speed 18,000min-1 ATC 90 In-flight measuring device Through spindle coolant Chip conveyor

Control unit: CELOS Table size: ?630 x 500 mm Stroke X: 650 Y: 520 Z: 475 mm ??????? B: -35 to + 110

FANUC31i-B5, BT30, ATC14, Table size : 650×400mm, Spindle speed : 24000rpm, Stroke : X500 x Y400 x Z330.

FANUC31i-B5, BT30, ATC14, Table size : 650×400mm, Spindle speed : 24000rpm, Stroke : X500 x Y400 x Z330.

FANUC31i-A5, BBT30, ATC 14, Table size : 650×400mm, Spindle speed : 24000rpm, Stroke : X500 x Y400 x Z330.

FANUC31i-B5, BBT30, ATC14, Table size : 650×400mm, Spindle speed : 10000rpm, Stroke : X500 x Y400 x Z330.

FANUC31i-B5, BT30, ATC 14, Table size : 650×400mm, Spindle speed : 10000rpm, Stroke: X500 x Y400 x Z330.

BT-30, ATC-14, F-16iMA,Table size (W x L) : 650×400mm, Stroke (X x Y x Z): 500 × 400 × 330mm, RPM : 15,000rpm, Weight : 2000kg.

BT-30, ATC-14, F-16iMA,Table size (W x L) : 650×400mm,Stroke (X x Y x Z): 500 × 400 × 330mm, RPM : 15,000rpm, Weight : 2000kg.

F-31i-B5, Stroke (X x Y x Z): 500 × 400 × 330mm, Table size (W x L) : 650 × 400mm, RPM : 10,000rpm, Weight : 2100kg.

F-31i-B5, Stroke (X x Y x Z): 500 × 400 × 330mm, Table size (W x L) : 650 × 400mm, RPM : 10,000rpm,Weight : 2100kg.

NC: CNC-C00 ATC 21 pieces BT30, table : 600×400, 16000rpm,stroke : 500×400×300,Power Requirements : AC 200-230V, 50/60 Hz 3 PHASE, CONT : 9.5kVA, Spindle motor : 4.9 kW, Short circuit current rating : 2.5 kA,Mass of machine 2250 kg, Ceiling shower coolant.

Full load rating : 45A/11.6 kw,Main motor : 5.5/3.7 kw,Control circuit : AC100V/DC 24V,Weight : 2700kg.

FANUC-16iMB BT30 ATC2 1 Spindle speed 20000rpm Table size 850

FANUC-16iMB BT30 ATC2 1 Spindle speed 20000rpm Table size 850

FANUC-16iMB BT30 ATC2 1 Spindle speed 20000rpm Table size 850

FANUC16i-MB S: 700 * 400 * 330 T: 850 * 410 ATC21 100-10000min-1 Maximum tool diameter: 80 mm Water soluble Not a high column specification * Simultaneous 3-axis machining is possible * Operating time: 1,057H

FANUC-16iMB BT30 ATC2 1 Spindle speed 20000rpm Table size 850

FANUC-16iMB BT30 ATC2 1 Spindle speed 20000rpm Table size 850

F-16iMB T: 850 * 410 S: 700 + 400 * 330 2000rpm # 30 ATC21

X-axis 500mm, Y-axis 400mm, Z-axis 330mm Table size 650mmx400mm Spindle speed 100-10000min-1, taper hole No30 21 turret devices, pull stud MASP30T-1

Control F-16i-MB, rotation speed 10,000 rpm T: 850 x 410

Fanuc16i-MB BT30 ATC14 T:850x410 S(XYZ)700x400x330

Fanuc16i-M BT30 ATC14 T:850x410 S(XYZ):700x400x330

Fanuc16i-M BT30 ATC14 T:650x400 S(XYZ)500x400x330

T:650x380 BT30 S(XYZ)500x380x300 ATC14 Japan Central Bank used (clean)

Robodrill Fanuc 31i-Model B 5 S: 500 * 400 * 330 T: 650 * 400 Maximum spindle speed: 24,000 rpm BT 30 ATC 21 books Spindle through coolant · tool length measurement

Fanuc31i-MB5 T:650x400 S(XYZ)500x400x330 10000rpm ATC21 Maximum spindle speed: 10,000 rpm BT 30 ATC 21 books Spindle through coolant · Tool length measurement · DDR (circular table)

OSP-U100M BT50 ATC24, table 1200x2100, sub-table 2370 x 1650 spindle 4000rpm

Fanuc, Bed top swing : φ310mm, width : 1870mm x length : 1980mm, height : 1790mm, Weight : 2000kg.

Max. Swing over the table : Ø480 mm,Max. Distance between centers : 750 mm, Max. Thread length to be ground : 500 mm, Max. Weight to be ground : 100 kgs, Max. Diameter to be ground : Ø200 mm, Max. Obtainable lead to be ground : 600 mm, Grinding wheel size (O.D. x W x I.D) : Ø510 x 10~50 x Ø228.6mm, Number of spindle speed steps : 2 (pulley and belt change), Spindle speed : 1675 rpm, Max. wheel surface speed : 2,100 m/min, Max helix angle : ± 45°, Total stroke : 265 mm, Rapid traverse stroke (NC controlled stroke) : 75 mm, Feed amount per step : Ø0.001 mm, Total stroke 650 mm, Feed amount per one step : 0.0001 mm, Lead setting range : 0.25 ~ 600 mm, Rapid retract without rotating spindle : 2,400 mm/min, Work spindle center height from bed bottom : 1,100 mm, Machine overall height : 2,055 mm, Machine net weight with standard equipment : 9,500 kg, Floor space : 4,100 x 3,615 mm, Electric power supply (Standard) : AC 200 / 220 V, 3 phase, 50 / 60 Hz, 45 KVA, Compressed air : 4.0 kg/cm2, 0.1 m3/min.

φ500.4 jaw, single action chuck : φ260×5000mm, with steady rest If there is a discrepancy between the contents and the actual product, the actual product will take precedence.

FANUC0MC Hole diameter Φ4-Φ20 , S: X1200 Y950, Z1600 without rest device Z1450 with rest device,

Table minimum indexing angle B: 0.001°, ATC : 30 BT50, Table size(L x W) : 1000 x 1000mm, X travel : 1500 (back and fornt), Y travel : 1200 (up and down), Z travel : 700 (left and right),W travel 400 (quill), Spindle speed: 3000rpm.

table size : 710 x 800mm, Spindle speed : 6-4000rpm, Stroke : X1500 x Y1250 x Z1150 x W500mm, Spindle diameter : 110mm.

Table size : 1000×1200mm, Spindle speed : 12000rpm, Stroke : X1500 x Y1200 x Z900 x W400, Spindle diameter : 200mm.

Table size : 1250×1120mm, Spindle speed : 3000rpm, Spindle diameter : 110mm, Stroke : X1600 x Y1250 x Z1130 x W500.

FANUC-16iMB, BT50 30 ATC, Table size : 1050×950mm, Spindle speed : 3000rpm, Spindle diameter : 110mm, Stroke: X1000 x Y1000 x Z700.

Table size : 1250×1250mm, Stroke : X1500 Y1500 Z1100mm,

FANUC-15MA T: 1600×1800×2APC X-3000 Y-2000 Z-1300 W-700 B-0.001 Spindle center from table top: 0 to 1800mm 5～2000rpm BT-50 AC26Kw ATC-60 Maximum workpiece diameter φ2400 Loading weight: 6,000Kg

Controller: FANUC 15M, Table work surface size: 1,600 × 1,800 mm, Workpiece allowable mass: 10t (6t when using APC), Table minimum indexing angle: 0.001°, Stroke X: 3,300 Y: 1,800 Z: 1,300 W: 700 mm, Spindle diameter: φ130 mm, Spindle speed: 5 to 2,500 rpm (3 steps), Spindle taper hole: BT50, Number of ATC: 90, Required floor space: 7,000 × 9,500 mm, Height: 4,750mm, Machine weight: 53,000 kg.

FANUC16i-MB BT50 30 ATC Table size 1000×1200 Spindle speed 12000rpm Stroke X1500 Y1200 Z900 W400 Arbitrary indexing Center through (3Mpa) Chip conveyor

TECH CAPACITY : φ:110

Control:Tosnuc 888, Table area:1400x1600mm,Table indexing: arbitrary indexing,S(XYZW): 2000x1500x1450x500mm,5to3000rpm,BT 50,ATC-90

W21FA-2, Maximum workpiece size: 800 x 600 x 215, Maximum workpiece weight: 500kg, TABLE SIZE : 590×514mm, Stroke (XYZ) : 350×250×220mm, S (U×V) : ±32×±32, Wire diameter used : φ0.1 to φ0.3mm.

F-180is-W, Maximum workpiece size: 820*730*300mm, Maximum workpiece weight: 1000kg, S(XYZ) : 550*370*310mm, Wire diameter used: φ0.1 to φ0.3.

Machining power supply: MGW-N,Table size : 920*600*1500kg,Stroke (X*Y*Z) : 600*400*260,Floor~Table : 1000,Maximum loading mass of table : 1500kg,Distance from floor to table top : 1000mm,Processing size : 1020mm*836mm,Maximum work piece size : 940*650*260mm,Machine width*depth*height : Non-CE Machine(2150*2150*200mm)CE Machine(2230*2215*2326mm),Required floor size : Non-CE Machine(3000*3350mm)CE Machine(3350*3350mm),Machine weight : 5400kg.

Table size : 920*600*1500kg,Stroke (X*Y*Z) : 600*400*260,Floor~Table : 1000,MC Body Dimension : L2230*W2215*H2326,Total electrical capacity : 4.7KVA,Processing tank size : 940*650*260mm,Machine width*depth*height : Non-CE Machine(2150*2150*200mm)CE Machine(2230*2215*2326mm),Required floor size : Non-CE Machine(3000*3350mm)CE Machine(3350*3350mm),Machine weight : 5400kg.

F-18iW Maximum work size: 790*730*300mm Maximum work mass: 1000kg Travel (X*Y*Z): 520*370*310mm Travel (U*V): ±60*±60mm

Maximum work 　　800 × 600 × (H) 215mm Mass 500kg ○ Table 　　590 × 514mm ○ Each axis movement amount 　　XYZ: 350 × 250 × 220mm 　　UV: ± 32 × ± 32mm ○ Maximum taper angle 　　15 ° (at plate thickness 100mm) ○ wire 　　wire diameter φ0.1 ~ φ0.3mm (※ φ0.1, φ0.15 optional) 　　maximum wire electrode traveling speed 15 m / min ○ mechanical size 　　dimensions: width 2300 × deep 2200 × height 1930mm 　　weight: 2590㎏

FANUC 180iS-WB Automatic wiring taper processing S: (XYZUV) 550 x 370 x 310 x ± 60 x ± 60 T: 770 x 590 Maximum work size 820 x 820 x 300

Controller: FANUC 180is-WB, Maximum workpiece dimensions: 650 x 570 x 250 mm, maximum workpiece volume: 250 kg, Table stroke: 37×270mm, Z-axis stroke: 255mm, UV axis stroke: ±60mm x ±60mm, maximum taper angle: ±30°/80mm, Wire diameter used: φ0.05 to 0.3 mm, maximum wire diameter: 10 kg.

In operation by Hyogo prefecture users With automatic wiring 0.3 wire 0.5 jet nozzle Warning light Patrite.

Specifications: 458 * 510 * 406

TECH CAPACITY : T:700x1000

MCOSMOS-V 3.0 (Windows XP) XYZ Measurement range 700 � 1000 � 600 Minimum display amount 0.0005 Maximum workpiece height 800 Maximum workpiece weight 800 kg Machine dimensions Width 1470 � back 1980 � high 2830 Machine weight 1630 kg Air dryer

Maximum outer diameter: 140mm, Mechanical bed area : width 750 * depth 680 * height 1350mm, Mechanical weight : 1300kg.

70°φ300, 2.2kw, change gear

GE-FANUC160i-M, Face milling : Maximum outer diameter: 220mm, Maximum normal module: 7.5mm, Maximum lateral module: 9mm, Tooth Tolerance: 6-180, Spiral angle: 0-60 degrees, Maximum transmission ratio: 10:1, Minimum transmission ratio: 1:1, Stove speed: up to 600 U/min, Maximum axis offset: 50 mm, Cutter Head Radius: 2.25" - 4.5", face hob: Maximum outer diameter: 200mm, Normal module: 1.5 - 6.5mm, Tooth Tolerance: 6-180, Spiral angle: 0-60 degrees, Max/Min Transmission Ratio: 10:1 / 1:1, Maximum allowable tooth width: 55mm, Cutter head radius: 49 - 110 mm, Maximum axis offset: +/-50 mm, Machine weight T : 16.5T.

Spindle stroke: 450ST, 100-600rpm, Machinable workpiece inner diameter: MAXφ130mm, Machinable workpiece inner diameter length: 300mm.

GOT1000 (Mitsubishi control), Number of pressurizing axes: 2, Machining capacity: φ60*150mm, Spindle stroke: 250mm, Spindle reciprocating speed: Max. 50m/min, 600rpm, Index table: φ500/4 divisions.