Capacity :160T,Stroke number: 30-55spm,Main motor :15kW,Air pressure used: 5 kgf, Sudden stop time :185ms,Maximum stop time Two-handed operation :185ms,Light beam type :205 ms, Overrun monitoring device setting position :12±3.

Capacity : 250T (Double crank) , Stroke length : 250mm , spm : 20~35spm , Die height : 500mm , Slide Adjustment : 120mm , Slide dimensions (left to right x front to back) :2700 X 700mm, Bolster dimensions (left to right x front to back) : 2700 x 760mm, Main Motor : 30kW.

Capacity : 250T (Double crank) , Stroke length : 170mm , spm : 25~60spm , Die height : 450mm , Slide Adjustment : 120mm , Slide dimensions (left to right x front to back) :2100 X 700mm, Bolster dimensions (left to right x front to back) : 2400 x 920mm, Main Motor : 30kW.

Capacity : 250T (Double crank) , Stroke length : 250mm , spm : 20~30spm , Die height : 525mm , Slide metering: 120mm , Slide dimensions (left to right x front to back) :2100 X 700mm, Bolster dimensions (left to right x front to back) : 2700 x 920mm, Main Motor : 30kW.

Capacity : 200T (Double crank) , Stroke length : 250mm , spm : 25~45spm , Die height : 500mm , Slide adjustment : 110mm , Main Motor : 22kW.

Capacity : 250T (Double crank) , Stroke length : 250mm , spm : 20~35spm , Die height : 525mm , Slide adjustment : 120mm , Main Motor : 30kW.

Capacity : 200T (Double crank) , Stroke length : 250mm , spm : 25~45spm , Die height : 500mm , Slide adjustment : 110mm , Motor : 22kw , with coil feeder

Capacity: 200t, Number of Stroke : 40-75spm, Stroke length: 150mm, Die Height : 450mm, Slide adjustment : 110mm, Slide dimension (left to right x front to back) : 1850*650mm, Bolster dimension (left to right x front to back) : 2400*700mm, Main motor: 15kw.

Capacity : 200t, Stroke length : 250mm, Number of strokes : 30-50 spm, Die height : 500mm, Slide adjustment : 120mm, Slide dimensions (left to right x front to back) : 1850×650mm, Bolster dimensions (left to right x front to back) : 2400×850mm.

Capacity: 250t, Stroke length : 280mm, Number of stroke : 20-35spm, Die height: 550mm, Slide adjustment : 120mm, Slide dimension (left to right x front to back) : 2100 x 700mm, Bolster dimension (left to right x front to back) : 2700 x 920mm, Main motor: 30kW.

Capacity : 2000kN,Tonnage Rating Point : 7mm,Stroke Length : 250mm,Continuous SPM (No Load) : 25 ~ 45spm,Die Height : 500mm,Slide Adjustment Range : 110mm,Slide Area (L.R. x F.B.) : 1850 x 650mm,Bolster Area (L.R. x F.B.) : 2420 x 840mm,Frame C Frame (b4 x h3) : 430 x 800mm,Frame Inner Dimension (a4) : 1926mm,Bolster Thickness : 170mm,Anchor Bolt Locations (a1 x b1) : 2080 (1980) x 1770mm,Installation Area (a2 x b2) : 2256 x 2225mm,Maximum Dimension(a3 x b3) : 2885 x 2340mm,Overall Height (h1) : 3725mm,Bolster Surface Height (h2) : 1000mm,Main Motor : 22 x 4kW x P,Main Breaker Capacity (380/415V, 50/60Hz) : 75A,Maximum Upper Die Weight : 1200kg,Approximate Press Weight : 27t,Required Air Pressure : 0.5MPa.

ST Length: 280mm ST Number: 20~35spm Die height: 550mm Slide adjustment: 120mm (electric)

Capacity : 250t, Stroke length : 300mm, Number of stroke : 15-30 spm, Die height : 550mm, Slide adjustment : 120mm, Slide dimension (left to right x front to back) : 2100 x 700mm, Bolster dimension (left to right x front to bacl x thickness) : 2700 x 950 x 190mm, Emergency stop time : 192ms.

S: 250 25-45spm DH: 500 Adj: 110 SL: 1850*650 B: 2420*850 (pin hole)

W crank press S: 250 25-45 spm DH: 500 Adj: 110 SL: 1850*650 B: 2620*840

Capacity : 250T, Stroke : 250m, SPM : 40, Die Height: 550, Slide Adjustment: 120, Bolster Area: 2700 * 950mm, Slide Area: 2100*700mm

Capacity: 250 T, Stroke: 280 mm, Strokes Per Minutes: 20 - 35, Slide Adjustment: 120 mm, Die Height: 550 mm, Bolster Area: 2700 mm * 920 mm, Slide Area: 2100 mm * 700 mm, with Die Cushion

Capacity: 250 T, Stroke: 280 mm, Strokes Per Minutes: 20 - 35, Slide Adjustment: 120 mm, Die Height: 550 mm, Bolster Area: 2700 mm * 920 mm, Slide Area: 2100 mm * 700 mm

Capacity: 250 T, Stroke: 280 mm, Strokes Per Minutes: 20 - 35, Slide Adjustment: 120 mm, Die Height: 550 mm, Bolster Area: 2700 mm * 920 mm, Slide Area: 2100 mm * 700 mm

Capacity : 200T, Stroke : 250mm, Stroke per Minute : 20~42mm, Slide Adjustment : 110mm, Die Height :500mm, Slide Area : 1850*650mm, Bolster Area : 2420*840mm Motor : 22Kw,

Capacity : 200T (Double crank) , Stroke length : 280mm , spm : 25~45spm , Die height : 485mm , Slide adjustment : 80mm , Motor : 22kw , with coil feeder

Capacity: 160T (Double Crank) Stroke: 130mm, Stroke per Minute: 45~80spm, Die Height: 400mm, Slide Adjustment: 100mm, Slide Area: 1500*580mm, Bolster Area: 2040*600mm

Capacity : 200T, Stroke : 300mm, Stroke per Minute : 20~35mm, Slide Adjustment : 110mm, Die Height :600mm, Slide Area : 1850*650mm, Bolster Area : 2770*840mm Motor : 22Kw

Capacity : 200T (Double Crank), Stroke : 250mm, Stroke per Minute : 25~45spm, Die Height : 445mm, Slide Adjustment : 110mm, Slide Area : 2100*650mm, Bolster Area : 2400*850mm

Capacity : 250T, Stroke : 300mm, SPM : 15-30, Die Height: 600, Slide Adjustment: 120, Bolster Area: 2700 * 950mm, With Amada leveler feeder (Model: LFD-400V 2005)